Are these the same keyboards?

From Logitech Directly
From Amazon.com
They appear to be the same, but the product number is different, and of course Amazon has it $20 cheaper.
So, are they the same? Any help/opinions are appreciated.

At first I thought that since there are 3 iPads for this keyboard/cover .... the iPad 2, 3 and 4 - and since it is available in 2 colors, black and white - I assumed that there were technically 6 different keyboards that correspond to the model number.
But maybe there were two original model numbers for the iPad 2 in black and white, then with each little upgrade to the keyboard, they assigned new model numbers.
I really don't know for sure, but that model number is listed on the Logitech site. It may be the last version of that particular keyboard but it is still available from Amazon brand new. However, I am just guessing here.

Similar Messages

Hi,i need to upgrade my 13"late 2011macbook pro with an ssd drive.i have noticed there is a system hard drive for booting up and a data storage hard drive that my computer uses,are these the same hard drive i can see inside my laptop?

hi,i use logic pro 9 and cubase to record,produce and master audio recordings and have bought a mac as recommended.have upgraded to 8gig memory (which i was told was the maximum you could upgrade a macbook pro)and still my recordin is slightley behind plauback.i need to replace my hard drive with a solid state drive to solve the problem.i have seen on youtube how to replace the hard drive but have noticed on the disk partition information that there is a 500gig harddrive for the system(booting up ect)and a 500gig harddrive for data storage,are these the same unit?i need to be sure im upgrading what the system uses to an ssd as well as the data storage or the problem wont be solved.i have an external hard drive so i have been looking at a smaller,faster ssd. hope you can help!

DaisyMay wrote:
Firewire 400/USB 2.0/1.1
I would recommend not settling for less then USB 3 or hold out for Thunderbolt, if your machine is capable. Firewire 800 minimum.
MacBook Pro, Mac OS X (10.7), 2.4GHz IntelCore i5 320 HD 8GB RAM ParallelsDesktop6.0

Is there such a thing as after effects 5.5 --- not cs5.5 but just 5.5 or are these the same?

trying to purchase but not sure if there is a difference between these two.

todd, that's the point of the post. i didn't know the difference. i don't normally use after effects, i actually use illustrator and photoshop more; however, once in a while, i do use after effects. to facilitate the process, i normally purchase and edit templates from videohive.net and a lot of the new ones use cs5 or higher so i was looking to upgrade my cs4 version.
since i don't use it often, i wanted to find one on ebay. a new unopened one of course. this one listing with 5.5 came up but did not look right so i am verifying here.

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard, and now the two monitors are showing the same thing. How do I undo what the cat did?

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard touching various keys, and now the two monitors are showing the same thing. How do I undo what the cat did?

Have you tried HELP in FINDER? If you open HELP and enter 'displays' in the field in the upper right hand corner you will get a list of topics on setting up monitors. Specifically read 'Setting up multiple displays to show the same image' and 'Setting up multiple displays as an extended desktop'.
Ciao.

There are many apps I purchased for my android phone that are exactly the same for the iPhone, do I have to buy these again or would the license transfer?

There are many apps I purchased for my android phone that are exactly the same for the iPhone, do I have to buy these again or would the license transfer?

Yes you need to buy them again. Apps written for one device will not run on the other.

Is there any way that I can share an in-app purchase over multiple devices even if they are under the same iTunes account?

So there are several iOS devices in my family and on one of our iPads we have purchased an in-app purchase. I also have the same app on another iPad and would like to also have access to that in-app purchase. Both of these devices are under the same iTunes account so is there a way to share this in-app purchase across multiple devices?

You can check here > iTunes Store: About In-App Purchases
But I don't think this is possible.

Issues with processing messages on one receive port causes problems on all the receive ports that are on the same handler

Greetings,
An integrator installed biztalk in our environment to process the hl7 message flow between their source application(s) and several receiving applications. We've had problems with this set-up for a while now because some receiving applications sometimes have
problems processing the messages. Be it either because there's problems with the server that processes the messages of a certain port or because there's problems with the software/daemon/service that needs to process these messages.
The main problem with this, is that the receiving end of this isn't under our control nor under control of the integrator, but when one receive port isn't processing their messages for a while it causes a problem with all the receive ports that are on the
same handler. So other receive ports start noticing a slow-down of their incoming messages until after a while nothing gets through anymore.
What is the best practice to prevent these kind of problems? Should we just create a handler for every receive port? Because that seems a bit overkill.
Thanks in advance.

What do you mean exactly with this question?
"Can you provide some more detail like BizTalk the receiver? "
The adapters are mainly file and MLLP, the MLLP adapters are already seperated from the file adapters (a handler for MLLP and a handler for file).
The problem with all the receive ports is that when one receive port isn't processing its messages (usually caused by the software processing the messages) the other receive ports on the same handler receive their messages/files a lot slower. If for any
reason the problem isn't fixed soon, the other receive ports on the same handler actually stop receiving any messages at all.
Isolating the receive port that causes the problems like la Cour suggested can work, but next time it might be another port that experiences this issue. So we are looking for a way to make sure the whole message flow isn't hindered by one port (whichever
port) that can't process its messages. Or rather by one receiving software that can't process its messages.

My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?

My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?

Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.

Most people are having the same problem

looks like most people are having the same problem. either no music will go onto their ipod or it says it has transfered and nothing actually has, only to get some annoying message with (-69) in it. does anyone know how to fix this, or why this happens?

This is how my troubles started, when i upgraded to itunes 5 a while ago. Songs would freeze when loading to ipod and soon i started getting error -69 and ipod became unresponsive. Then it totally effed up, not being recognised by windows, not mounting or restoring and all the songs on it wont play at all. Took it in to the store where i bought it and they told me that my hard drive died. Ah now i wait while it gets repaired. So all these errors are a sign that your ipod will soon be useless. Oh yeah for the -69 i found that getting rid of the songs that it froze on worked pretty well, something to with checksum or md5 something.

Personal area and EE subgroup of Infotype 01 and 77 are not the same. Help!

Hi All,
Good day.
I read your thread here and I guess we have a common problem. Can I ask for your help?
I run the program RPURACU0 to update the new race and ethnicity data in infotype 77. But why it changed the Personnel Area and Employee Subgroup. Only the race and ethnicity codes should have been changed and not the Personnel Area and Employee Subgroup.
Please help me what causes these discrepancies in data.
Example:
In PA20, enter personnel number 7600634. Personal area = US81 and EE Subgroup = U0. But when displaying infotype 77 the Personal area = US02 and EE Subgroup = U1.
The personal area and EE subgroup of infotype 01 and 77 should be the same. In this example, they are not the same. Please help me to find out what causes this problem.
Please reply asap because this problem should be solved immediately.
Thanks in advance.
Carina

Hi GRM,
Thanks for your reply.
I checked the date from the table and I found out that:
P0001-ENDDA not equal P0077-ENDDA
P0001-BEGDA not equal P0077-BEGDA
Please reply asap.
Thanks,
Carina

Can I copy my bookmarks from Safari to Firefox if they are on the same computer?

I would like to use Firefox and I want to '''copy''' the bookmarks I have in Safari. I have a Mac with OS10.6 and both Safari and Firefox are on the same computer. I want to know if Firefox is more friendly since I do a lot of writing.

You should update to Firefox 6.0.1 through Help > About > Check for updates
before testing rather than be disappointed with a Firefox update after testing.
All browsers can use the Netscape bookmarks formatted HTML file to copy bookmarks. But according to documentation you can import directly from Safari. Hopefully that applies to your Mac, because it is not shown as an option for me on Windows 7.
'''Import bookmarks''' - MozillaZine Knowledge Base
*http://kb.mozillazine.org/Import_bookmarks#From_Safari
"'''Firefox imports Safari settings automatically'''. Just go to File > Import... and select Safari. In the next window, check the boxes of what you want to import. For example, your Safari Bookmarks will appear in Firefox's Bookmarks menu as "From Safari." Whatever other bookmarks you had on your Safari Bookmarks Bar will automatically appear on your Firefox Bookmarks Bar, too. "
If that does not work:
:'''Exporting Bookmarks from Safari:''' (from Safari Help)
# Choose File > Export Bookmarks.
# Specify a location for the exported file. The file's name will be "Safari bookmarks.html." Most browsers are able to import this type of file.
'''Importing Bookmarks into Firefox:'''
#"Command+Shift+B" to bring up Bookmarks Library List, can be done from Bookmarks menu > "Show all bookmarks"
# "Import and Backup" menu > Import HTML > From an HTML file
#: (unless you see From Safari)
Firefox uses the same keyboard shortcut to display menus as used on Safari (on a PC it is the "Alt" key).
Firefox is highly customizable, so you can change the appearance, and a lot of what would be done in other browsers must be done using extensions in Firefox, but the extensions for the "same" feature probably give you a lot more functionality and control. In the following making Firefox look more like 3.6 would be of interest if you are used to other older browsers -- Safari grew up independently so other browsers are more alike.
You can make '''Firefox 6.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional. (later on)
'''Keyboard Shortcuts:'''
* Firefox Support Home Page | Firefox Help<br>Adapts to your system, but a very limited number of shortcuts are shown<br>https://support.mozilla.com/kb/Keyboard%20shortcuts
* Firefox and other Browser Keyboard Shortcuts (Comparison Table)<br>Long list of shortcuts but Windows oriented, most other systems use similar <br>http://dmcritchie.mvps.org/firefox/keyboard.htm

How do I transfer my songs from my old computer to my laptop? They are both the same iTunes account

How do I transfer my songs from my old computer to my laptop? They are both the same iTunes account.

These are two possible approaches that should work to move an existing iTunes library to a new computer.
Method 1
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase are reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Should you be in the unfortunate position where computer has died with no backup then see Recover your iTunes library from your iPod or iOS device.
tt2

The Windows SMB feature has file locking if multiple users are accessing the same file. Does Snow Leopard Server File Sharing (AFP) provide similar features?

The Windows SMB feature has file locking if multiple users are accessing the same file. Does File Sharing (AFP) on Snow Leopard Server provide similar services?

Were you ever able to solve this problem. I'm having similar issues since upgrading to snow leopard. Four macs connect to a Windows Server 2003 for shared files. Each user has full permissions & when we "get info" it shows read & write permissions. Two of the computers were running 10.4, two were running 10.5. Everything worked properly until upgrading to snow leopard. Some files let me copy, move, delete. Others either just hang up or we get a "no permission" error. Also getting a "pdf is in use" error, even when the file/folder doesn't contain a pdf. We had our IT rep check the server who said everything is in working order. They don't represent macs any longer but feel that it's a mac problem. I would have to agree since this problem only started after the upgrade, and the one machine that was not upgraded (still running 10.5.8) is not dealing with these problems.
Lastly, I would install 10.5 back on all of the computers if I could, but the leopard disk that came with one of the computers wouldn't work with the 2 machines running 10.4 and I didn't see it available at the apple store. I'll buy it if it's still available, but why wouldn't the disks that I have work?
Thanks for any help

Hello can someone help me I have an iphone 4 and my daughter has an ipod touch we are on the same email address but somehow with in the last 25hrs all of my contacts are gone and only hers on on my phone is there a way for me to get all my contacts back?

Hello can someone help me I have an iphone 4 and my daughter has an ipod touch we are on the same email address but somehow with in the last 25hrs all of my contacts are gone and only hers on on my phone is there a way for me to get all my contacts back?

If you need assistance with finding any of your restores or attempting to restore from any that happened prior to his incident follow this article
http://support.apple.com/kb/ht1766
IF you do find a backup that has your contacts; I'd /highly/ recommand turning off your wifi network after the restore is finished because if the issue is with your iCloud your contacts may merge back with her's.
With iCloud you DO NOT want to share the account; bad things happen Evil evil thigns...
But in all seriousness; if two devices have the same iCloud; iCloud is told to merge and sync infomation between hte two and can't tell that it doesn't belong to the same person

Is there a way to "mix" the nodes and leaves of the tree so if they are at the same level, they will display in a specified order.

Is there a way to "mix" the nodes and leaves of the tree so that even if they are at the same level (1,2,3...), they will display in a specified order (via sort sequence, alphabetical, etc.).
History:
We are using the Tree UI element to display/manage a material bom interface. We seem to be running into an issue with displaying the nodes/leaves of the tree.. regardless of the order that the context is built (which is currently the order of the exploded BOM from from CS_BOM_EXPL_MAT_V2), the bom is displayed with the nested boms at the top of each level and the single materials below them. For example. If TK1 contains Material1, Material2, Material3, Kit1(containing component1, comp2, comp3), Material4, Kit2(containing comp4, comp5, comp6), and Material5 (in this order), the tree will display with the A level node as TK1, the next node as Kit1 (with its subleaves of comp1,comp2,comp3), Kit2(with subleaves of comp4,comp5,comp6), THEN Material1, material2, material3, material4, material5. Our users are adamant about the items displaying in the correct order (which should be alphabetical based on the description for one report and by location for purposes of inventory for another). I've searched but not been able to locate a similar question. If I've missed it, please point me in the right direction. The users want the tree, not a "tree" table. This is our first attempt at the tree, so maybe we're missing something basic?
TK1
-Mat1
-Mat2
-Mat3
-Kit1
--Comp1
--Comp2
--Comp3
-Mat4
-Kit2
--Comp4
--comp5
--comp6
-Material5
displays as
TK1
-Kit1
--Comp1
--Comp2
--Comp3
-Kit2
--Comp4
--Comp5
--Comp6
-Mat1
-Mat2
-Mat3
-Mat4
-Mat5

co-workers said example picture is misleading.. we can make the order work if everything is a "folder" but not a mix of "folders" and "files" (if making a visual reference to the windows browser). i.e - a file is represented as an empty folder.
TK1
. Mat1
. Mat2
. mat3
> kit1
.. comp1
.. comp2
.. comp3
. mat4
> kit2
.. comp4
.. comp5
.. comp6
. mat5
displays at
TK1
> kit1
.. comp1
.. comp2
.. comp3
> kit2
.. comp4
.. comp5
.. comp6
. mat1
. mat2
. mat3
. mat4
. mat5
we can make it work if everything is a folder. This is our current workaround.
TK1
> mat1
> mat2
> mat3
v kit1 (when expanded)
.. comp1
.. comp2
.. comp3
> mat4
> kit2 (when not expanded)
> mat5

Are these the same keyboards?

Similar Messages

Maybe you are looking for