Are upgraded Pages files unable to be sent over email?

I haven't been able to successfully email upgraded .Pages files in Mavericks, has anyone figured this out? I've tried zipping it, sending it over basecamp, google drive, and dropbox.

I have encountered the same problem .. what a nightmare. I hope this is a temporary bug. I tried to send out invoices created in Pages 5.0 and got a whole load of failed delivery notifications. This new version isn't fit to be used by grown ups..! What were they thinking. How can you work with an application that creates documents that you can't send by email in this day and age.
Back to the old version ...
Free.. Apple will end up paying people to use this nonsense.

Similar Messages

What quality loss is there when cam videos are compressed sent over email?

What quality loss is there when sending videos taken with the iPhone 3GS over email? It seems that it's being compressed in preparation for being sent over email.

Hi Ric,
The Canopus ADVC-100 works fine with FCE. Here are a few tips -
First, make sure you only connect or disconnect it from your Mac when both your Mac and the ADVC-100 are turned off. Make sure that your camera video-out is connected to the s-video port on the front of the ADVC-100. Ditto for the audio connections. Only DIP switch 2 (IRE level) should be in the ON position. Connect a FW cable from your Mac to the 6-pin FW port on the back of the ADVC-100.
Second, once they are connected via FW, make sure the ADVC is turned on and actually in analog-in mode before you start FCE. I have often found the ADVC-100 resets this mode by itself after being turned off or idle for an extended time. (All you need to do is hit the silver button once or twice, depending on the current mode, in order to switch it into Analog-in mode.) If it is not in this mode, FCE will not detect the ADVC and will act as if there is no device connected. (Normally there is a warning message if FCE fails to find a camera or ADVC connected however if you turned off that message at some earlier time you would not see it again.)
Third, you can use either the DV-NTSC or DV Converter easy setup in FCE. I have used both with my ADVC-100 and they both work.

Why are my pages documents unable to be attached in gmail

Since downloading Mavericks my Pages documents are unable to be attached in Gmail. Furthermore, in Final Cut Pro X videos that I attempt to post to
You Tube fail because, according to error window, network connection was lost. None of this happened before I upgraded to Mavericks.

Here are a couple of discussions indicating that Gmail is working on the Pages attachment issue. In the meantime, one workaround is to use Pages File Menu > Export To command and export to either a Word format or a Pages 09 format.
https://discussions.apple.com/message/23714858#23714858
http://productforums.google.com/forum/#!topic/gmail/VXFPW-44clg

Consumption of a lot of page file space with Solution Manager over windows

HI guys,
I have installed Solution Manager 4.0 SP10 over Windows 2003 Server, Standard Edition. The server has 4 Gb of RAM and 10Gb of page file.
Before to start Solution Manager the memory used is 500Mb and the used page file is 1Gbytes, but when I start Solman, the memory used grow up to 3.8 Gbytes and the pagefile to 7Gbytes.
Is this behaviour normal?, should I need near to 8Gb to run SolMan in memory?
does someone experience or tips regarding this is issue?
Thanks in advance for your comments guys!!!!
Regards Carlos Pozo.

Hi Ragu,
All SAP guides talk about aprox. 10Gb in Win and aprox. 20Gb (max.) in Unix.
You are right (also....;-) ), but my question is regarding the consumption of this page file, for example, we have XI 3.0 installed in AIX (ABAP+JAVA like Solman), and we have 8 Gbytes of RAM installed, in scenario we have in average 1.5Gbytes of free memory and not swap space used, that means in average XI use 6,5 Gbytes of memory (including DB instance, oracle 9.2), with at least 15 users connected, in contrast Solman has only one user connected and only 6 dialog wp and use almost 10Gbytes (adding RAM and SWAP space).
Is normal that Solman 4.0 need so much memory to run?
Do you know some way to decrease the swap consumption?.....
I know, I know.......I'm asking almost for magic solutions......

Why are the downloaded files unable to be extracted?

I've downloaded, or attempted to download the first app 3 times. An hour later a message stating that the files are unable to be extracted. I have Windows 7 and don't understand how interesting this thing can be if it's this hard to simply download the stuff I've already paid for. Not looking forward to Photoshop. Please help.

The downloads are huge and if you have an iffy internet connection they are probably stopping before being fully downloaded, which the extraction process can detect and give an error about.
You might try another browser or at least clear your cache on the browser you’re retrying on, so it doesn’t continue to use the partially downloaded file.
It also could be a virus-scanner or other internet-protection that is blocking access to the file once it is downloaded, so you might disable those sorts of things for the time you’re downloading, although make sure you’re download from an Adobe site, not somewhere else.

Why are the Pages files so big?

I typed a half page document. Just words; no graphics. When you look at file size, it is 5.5MB! What gives?

cooperbrett, I have the same problem; it seems that files that go through iCloud (and then are downloaded back to a Mac) increase in size. My file is only a few pages of text and it's 5.7 MB.
See topic:
Pages 4.2 duplicate bug, huge file size

Are my Pages files on my mac too when I save to iCloud?

I'm trying to determine whether my Pages documents have an automatic backup save to my mac when I save them to iCloud. I know that I can see them in the Mobile Applications folder in the Library, but am wondering if this is a secure backup. ie, if the files were deleted form icloud would they automatically get deleted from the library folder on my mac? It would be good if Pages gave you the option as with Photo Stream to have files which are added to the cloud automatically added to a folder on your computer.
Anyway, what I really want to know is, can I just forget about my files and trust iCloud to deal with them, or do I continue making a duplicate at the end of the day and saving it to my computer?

If you delete a document from iCloud, it will be deleted from ~/Library/Mobile Documents also. If you want a secure backup you should save a copy to the Computer.
Storing Your Documents in iCloud

All my Numbers and Pages files unable to open on iPad and iCloud

It looks like all of my Pages and Numbers files from my iPad have been lost by iCloud? I don't use these apps often, but now when I launch them, all of my files have an upwards arrow icon in the upper right corner. When I select any file, the arrow goes away in under a minute, but the file never opens. When I try to access the files from iCloud.com from my MacBook, it says "Spreadsheet can't be downloaded. Please try again." What happened to my files!!!! I can open the "Getting Started" help files in each app.
My iPad is set up to backup Documents & Data to iCloud. The Storage & Backup options say I have 1.9 GB out of 5GB available. When I go into Manage Storage, it says I am using 5.1 MB for Numbers and 3.6 MB for Pages. When I drill down on each, it lists all of my files that won't open.
I can open my Keynote files from iCloud and my iPad. These do not show the arrow on the files. Reading through help files, the arrow seems to indicate that the file needs to be uploaded to iCloud? Turning off wifi on the iPad does not affect how this works. Force closing the apps and rebooting have no effect.
Any ideas? Is this an Apple bug or a confusing new feature of iCloud?

well, did the test again.. created on the iPad : see screenshot and date. Don't see any document preview.
Also opened all documents on iPad... same result.

PDF File corrupted when being sent by email by tomcat... what's wrong?

Hi,
I have been a little frustrated trying tomcat to send a pdf file by email after it have been uploaded to the server.
First case:
If i run the same code in windows, it works.
Second case:
If i run the same code manually in java in the tomcat linux server it works.
Third case:
The problem is when the code is running by tomcat in a jsp page.
In every situation the email goes to the sender, but in the last one, the reported size of the pdf file is not the same as the first and second case resulting in a pdf corruption. It cannot be opened.
I am running Tomcat 5.5.17 with jdk 1.5.0.10 in a Redhat Enterprise Linux 4 Server.
This is the code called by a jsp page.
package eor;
import java.util.Date;
import java.util.Properties;
import javax.activation.DataHandler;
import javax.activation.FileDataSource;
import javax.mail.Authenticator;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.Multipart;
import javax.mail.PasswordAuthentication;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeBodyPart;
import javax.mail.internet.MimeMessage;
import javax.mail.internet.MimeMultipart;
public class SendMailUsingAuthentication {
private static final String SMTP_AUTH_USER = "user";
private static final String SMTP_AUTH_PWD = "pass";
public void sendEmail() {
String from = "[email protected]";
String to = "[email protected]";
String subject = "Sendit from linux ";
String bodyText = "This is a important message with attachment";
String filename = "//home//test//HON-SOLMANT28AGO08.pdf";
Properties properties = new Properties();
properties.put("mail.smtp.host", "Testmailhost");
properties.put("mail.smtp.auth", "true");
properties.put("mail.smtp.port", "25");
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getInstance(properties, auth);
session.setDebug(true);
try {
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.setRecipient(Message.RecipientType.TO, new InternetAddress(to));
message.setSubject(subject);
message.setSentDate(new Date());
// Set the email message text.
MimeBodyPart messagePart = new MimeBodyPart();
messagePart.setText(bodyText);
// Set the email attachment file
MimeBodyPart attachmentPart = new MimeBodyPart();
FileDataSource fileDataSource = new FileDataSource(filename) {
@Override
public String getContentType() {
return "application/octet-stream";
attachmentPart.setDataHandler(new DataHandler(fileDataSource));
attachmentPart.setFileName(filename);
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messagePart);
multipart.addBodyPart(attachmentPart);
message.setContent(multipart);
Transport.send(message);
} catch (MessagingException e) {
e.printStackTrace();
private class SMTPAuthenticator extends javax.mail.Authenticator {
@Override
public PasswordAuthentication getPasswordAuthentication() {
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password);
}I will appreciate your help to solve this situation.
Regards,

bshannon wrote:
Are you sure you're using the Sun implementation of JavaMail on RedHat? Some versions of
Linux come with the Gnu version of JavaMail included, which might behave differently.
If you turn on session debugging, what does the protocol trace show?
Are you sure you're sending the same file in all cases?
Are you sure the file upload is complete before you send the file?Are you sure you're using the Sun implementation of JavaMail on RedHat?
Yes I am using JavaMail 1.4 from SUN.
If you turn on session debugging, what does the protocol trace show?
Yes. Below you will find the protocol trace.
Are you sure you're sending the same file in all cases?
Yes I am sure.
Are you sure the file upload is complete before you send the file?
Good point. I will check it out!
Protocol Trace output:
Grabando archivo en disco...
DEBUG: setDebug: JavaMail version 1.4.1
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth true
DEBUG SMTP: useEhlo true, useAuth true
DEBUG SMTP: trying to connect to host "168.243.220.232", port 25, isSSL false
220 SMTP IM2 Proxy Server Ready
DEBUG SMTP: connected to host "168.243.220.232", port: 25
EHLO web2.enteoperador.org
250-ESMTP Server Ready
250-SIZE 0
250-DSN
250-AUTH LOGIN
250-AUTH=LOGIN
250-STARTTLS
250 TLS
DEBUG SMTP: Found extension "SIZE", arg "0"
DEBUG SMTP: Found extension "DSN", arg ""
DEBUG SMTP: Found extension "AUTH", arg "LOGIN"
DEBUG SMTP: Found extension "AUTH=LOGIN", arg ""
DEBUG SMTP: Found extension "STARTTLS", arg ""
DEBUG SMTP: Found extension "TLS", arg ""
DEBUG SMTP: Attempt to authenticate
AUTH LOGIN
334 VXNlcm5hbWU6
c3ZhbGxl
334 UGFzc3dvcmQ6
dmFsZXJpYW1pYW1vcg==
235 Authenticated successfully
DEBUG SMTP: use8bit false
MAIL FROM:<[email protected]>
250 +OK Sender OK
RCPT TO:<[email protected]>
250 +OK Recipient OK
DEBUG SMTP: Verified Addresses
DEBUG SMTP:   [email protected]
DATA
354 Start mail input, end with "<CR><LF>.<CR><LF>"
Date: Fri, 26 Sep 2008 17:47:18 -0600 (CST)
From: [email protected]
To: [email protected]
Message-ID: <[email protected]>
Subject: Sendit from linux
MIME-Version: 1.0
Content-Type: multipart/mixed;
        boundary="----=_Part_0_28970806.1222472838992"
------=_Part_0_28970806.1222472838992
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
This is a important message with attachment
------=_Part_0_28970806.1222472838992
Content-Type: application/octet-stream;
        name="//www//tomcat//upload//oper-hon//HON-SOLMANT28AGO08.pdf"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
        filename="//www//tomcat//upload//oper-hon//HON-SOLMANT28AGO08.pdf"
JVBERi0xLjANCg0KMSAwIG9iag0KPDwgL1R5cGUgL0NhdGFsb2cgL1BhZ2VzIDIgMCBSID4+DQpl
bmRvYmoNCg0KMiAwIG9iag0KPDwgL1R5cGUgL1BhZ2VzIC9LaWRzIFsgMyAwIFIgXSAvQ291bnQg
MSA+Pg0KZW5kb2JqDQoNCjMgMCBvYmoNCjw8IC9UeXBlIC9QYWdlIC9QYXJlbnQgMiAwIFIgL01l
77+9DC/vv73vv71YYO+/vVsMF20t77+977+9Nkg777+9bitg77+9KO+/ve+/ve+/ve+/ve+/vXw1
X++/vW8J77+977+9NQknfu+/vQgw77+9TX1177+9YSwS77+9
------=_Part_0_28970806.1222472838992--
250 +OK message queued for delivery.
QUIT
221 Service closing transmission channel closing connection

Jpg sent by email will not display in outlook 2010

Since I have upgraded top the latest os pictures sent by email will not save or display in outlook 2010.
Help please

I agree, i can't understand why they don't just explain the settings. And why they do not consistently work.
I too had issues, Outlook was "working" when i set up the @me account, then I started getting the annoying little internat email login popup (that does not go away). Finally after many "experiments" i have it "apparently working" (will explain working with the following settings:
accoutn type: IMAP
incoming server: imap.mail.me.com Port: 993: SSL
outgoing server: smtp.mail.me.com Port: 25 (default): Auto
"Require SPA" is checked, but not on outgoing server.
It does now finally work without putting up the annoying internet email login. However, now i discoverd a greater problem.
OUTLOOK IS NOT REALLY SENDING THE EMAIL. It is putting it in the "sent" box as if it did, but no one receives it. No errors, no warning. And this dates all the way back to the time i started using the @me account. My only work around is to use the stupid icloud mail browser app. Really low in functionality compared to outlook.
This really affects the reliability of the icloud product and this is a serious error. It really cuts down on the utility of the icloud and whewther it can be integrated with the PC at all. Like everyone else i have also had the creation of multiple calendars and multiple contacts.
Apple better fix this quick or a lot of people will start using gmail, droid and google cloud products.

Last time I updated pages I lost features I liked and was unable to open some pages files. Now I see the features I liked are back but I have a lot more files to worry about. Will I be able to open files created in 5.2 if I upgrade to 5.5.3?

Last time I updated pages I lost features I liked and was unable to open some pages files. Now I see the features I liked are back but I have a lot more files to worry about. Will I be able to open files created in 5.2 if I upgrade to 5.5.3?

Within reason, Pages v5.2 documents are forwards compatible with Pages v5.5.3. Apple introduced the single file format document as a default with Pages v5.5.3 which is not backwards compatible with Pages v5 on Mavericks.
However, they also provided a File > Advanced > Change File Type > {Single File, Package} menu that allows you to change the current Pages v5.5.3 document into the backwards compatible Package type document. You would follow this transformation with a File > Save operation to complete it.

I upgraded Pages 5.1 on 2/25/14- worked until yesterday- now will not open lg files with "you need a newer version-" what??

I upgraded Pages 5.1 on 2/25/14. All worked fine until yesterday when I could not open my journal (large file) giving me the warning "you need a newer version of Pages to open this document". Other documents open. What to do?

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has not only managed to confuse all its users, but also itself.
Note: Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store.
Peter

When I try to open a Pages file, I get a "need to upgrade" from 4.3. When I try to download it, I get the message "installed" and that's the roadblock. What to do, what to do?

I recently upgraded to Mavericks. Now, when I try to open a Pages file, I get a message that I must upgrade Pages from 4.3. When I click to download, I get a message "installed." I'm going around and around: Need to install; it's already installed. TIA.

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Older versions of Pages 5 can not open Pages 5.2 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.2 files can not be opened in Pages 5.
Anything that is saved to iCloud and opened by newer Pages versions anywhere, is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Technical Details: The website does not support encryption for the page you are viewing. Information sent over the internet withour encryption can be seen by other people while it is in transit

Technical Details:
The website does not support encryption for the page you are viewing.
Information sent over the internet withour encryption can be seen by other people while it is in transit
== This happened ==
Not sure how often
== started few days ago. previously never happened before.

I was loading a website, it then stated as below, it wasnt any of the problems stated below.
SERVER NOT FOUND
# Check the address for typing errors such as
ww.example.com instead of
www.example.com
# If you are unable to load any pages, check your computer's network
connection.
# If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
Thus i checked the Page Info, it states that:
Security Info on page:
'''This website does not supply ownership information.
Connection not Encrypted.'''
Technical Details:
The website does not support encryption for the page you are viewing.
Information sent over the internet withour encryption can be seen by other people while it is in transit

Trouble opening a just created Pages file.....error message says I need a newer version of Pages......Apple Store says I have version 5.0.......opening an older Pages file it says I have version 4.3.......can not find any way to try another upgrade to 5.0

Trouble opening a just created Pages file.....error message says I need a newer version of Pages......Apple Store says I have version 5.0.......opening an older Pages file it says I have version 4.3.......can not find any way to try another upgrade to 5.0........please help......
Thanks

Personally, I would not recommend deleting/removing the iWorks 09 folder for several reasons: one is that the new versions have had several functionalities removed and until you decide that you can work with the new one and do not miss any features the older version had, I would leave the old one in place. Personally, I will not be using the new versions.
The second reason is that you can accomplish what you want using a different approach: simply open a Get Info window of your document and choose which version of Pages you want this to open in - you can also stipulate that all docs like this are opened with whichever particular version.
FWIW: Once you have edited an old document in the new Pages version, you can no longer open it in the older version. However, you can still export it to the old version.

Are upgraded Pages files unable to be sent over email?

Similar Messages

Maybe you are looking for