Are VTP config lines not included in configurations?

I've multiple switches, with the core being in "Server" and the connecting switches being "Clients". All of these devices show information when executing "sh vtp status", for example - but none of them have any VTP-related configuration statements. I was expecting to see things like "vtp password <password>", "vtp mode server", etc. Are VTP configuration statements not included/displayed when you execute a "sh run", etc.?
Switch#show vtp status
VTP Version : 2
Configuration Revision : 51
Maximum VLANs supported locally : 1005
Number of existing VLANs : 19
VTP Operating Mode : Server
VTP Domain Name : netvtp
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0xD0 0x7A 0x76 0x01 0xA2 0x20 0xCB 0x4D
Configuration last modified by 10.10.10.10 at 6-16-04 17:59:15
Local updater ID is 10.10.10.10 on interface Vl1 (lowest numbered VLAN interface found)

Hi,
I believe this is down to the fact that the commands are configured using the "vlan database" which is not part of the privilege mode configuration, its a dat file stored in flash that must be loaded seperatly to the start-up config when the switch boots.
The same is true on my 3750 switches for VLANs and VTP information that's been configured in this way
ds-gsw-a#sh run | i vtp
ds-gsw-a#sh run | i vlan
switchport access vlan 4
switchport access vlan 4
switchport access vlan 104
switchport access vlan 4
switchport access vlan 4
switchport access vlan 4
The VLAN configuration only shows which ports have statically configured VLANs.
I believe all these commands are stored in the vlan.dat file in flash:
ds-gsw-a#dir flash:
Directory of flash:/
3 -rwx 1816 Mar 01 1993 00:03:11 vlan.dat
4 -rwx 47 Jul 05 2005 12:42:35 private-config.text
5 drwx 192 Mar 01 1993 00:05:05 c3750-i5-mz.121-19.EA1c
85 -rwx 199 Aug 02 2004 16:41:51 layout.text
86 -rwx 9959 Jul 05 2005 12:42:35 config.text
15998976 bytes total (8940544 bytes free)
Rgds
Paddy

Similar Messages

Settings: Why are basic webservices settings not included (i.e. OneDrive behavioural settings are hidden in the system tray)?

What is the idea of a new control panel if you can not in fact get an overview or kind of dash board?
Settings includes PC+Cloud, i.e. Accounts let you do settings for the cloud, i.e. connect to your live account.
But why are basic webservices settings not included (i.e. OneDrive settings is in the system tray)?
Great consolidation is happening now between settings, control panel - i.e. getting rid of obfuscation, blur and complexity between legacy settings (control panel) and actual kind of settings. However do not recreate the problem by leaving the
next step of integrating cloud settings across the middleware. What is the idea of a new control panel if you can not in fact get an overview or kind of dash board?

Hi,
Interesting issue, what about other configuration or settings? Do they work fine or keep reverting after a reboot? Have you tested this issue in another user account? What is the result?
Regarding to unable to save settigs for current user hive, I doubt whether there's an application you installed recently or an malware\virus changes the permission of registry entry or value of registry keys like
HKCU\Software\Classes which causes this issue.
Yolanda Zhu
TechNet Community Support
Hmm... I don't understand. Nothing is reverting after a reboot, as well I'm
not unable to save settings in the current user's hive. The correspondent registry keys can be saved perfectly fine and they are
deleted, not reverted after a reboot. I pointed to the exact code that does it, the code is located in Microsoft DLL with all certificates and digital signatures intact. Permissions obviously don't matter, since svchost.exe is executed with the highest
integrity level and under the System user account, the keys in question inherit permissions, which allow System to do whatever it needs without restrictions
by default, you can't change it to allow more.
So can you explain how it can be some malware?
The issue is intermittent, I don't have a 100% repro, therefore “testing” under another user account is doubtful.
Dei nostra Matrix est.

Why are video production apps not included in Creative Cloud membership?

I took up the offer of getting Creative Cloud cheap(er) for a year (I have a registered copy CS4 Master Collection). However, when I go to the Creative Cloud app download page or the Adobe Application Manager (see below) I am only able to download a subset of the apps that I had in CS4 MC?
Why?

They are included, your system simply doesn't meet the system requirements. All video apps require a 64bit operating system and from the layout of the title bar alone I can tell that you are on Win XP. So no, unless you upgrade your operating system, AE, PPRo, Encore, AME, Prelude etc. will never show up.
Mylenium

To Do Lists not included in iCal??!!

Am I missing something or are To Do lists not included in the iPhone version of iCal? If that is true why is this so? I will be including this on another list of things I don't understand about the software implementation in iPhone (no way to back up Notes for instance.)
Dan Carter

It is well documented that the iPhone does not support ToDo lists, nor does it sync notes. Notes can be emailed, just not synced.
It is very possible that this will be corrected in a future software upgrade, but as for now neither is possible.

How to modify Exchange 2013 TXT(SMS) notifications to not include the subject line or any of the message body of emails

We have a group of users who are not permitted to download/save any emails they receive onto public or personal devices, they are only allowed to log in manually and view their mail through OWA (I realize there are ways to use OWA to download mail, however
the users are explicitly forbidden from doing this, and any countermeasures that can be put in place, are/will be).
With our new Exchange 2013 server, it seems it has the built in capability to send TXT(SMS) notifications instantly when a user receives mail. We would like to allow our users to utilize this feature, however currently, the notification includes not
only the sender of the email, but also the subject line and part of the message body. As it stands, we can't have this as part of the email would then be saved on their device.
I am wondering if there is a way to modify Exchange 2013 to not include the subject or message body, so that our users could at least get an instant notification 1-that they have a new email and 2-who it's from?
Any information would be appreciated, thanks!

We can configure SMS Text Message Notification for various situation like Calendar notifications, Voice mail notifications, Email notifications if your user's Mailbox hosted in Exchange Server 2013
To set up your phone to receive text messages when you want to have Calendar notifications, Voice mail notifications, Email notifications use the steps as follows
Note: Text message fees are applicable and it will appear on your phone bill.
Login to Outlook Web App, click Options > See All Options > Phone > Voice Mail tab.
In the Notifications section, choose one of the following options:
Calendar notifications...
Voice mail notifications...
Email notifications using an Inbox rule...
Turn On Notification
First step is to turn on the notification of text messaging. Click Turn on Notifications
Select Setup Notification: Need to select your operator,
It will request to provide your Mobile Operator.
Note: As of now Exchange Server 2013 supports only the below list of operators.
Locale: United State
Mobile Operator: AT & T, Sprint PCS, T-Mobile, Verizon Wireless
Locale: Canada,
Mobile Operator:Bell Telus Mobility
Locale: Romania
Mobile Operator:Orange Romania
Provide your telephone number. It will send you the passcode on your mobile number.
Type the passcode for confirmation
Calendar Notifications:
On Selecting Calendar Notification: Select the option based upon your requirement.
Email Notification Using Inbox Rule:
Similarly for the text messaging for the email notification, select the option based upon your requirement and setup them up
Exchange Queries

Exporting EPUB from InDesign CC not including line breaks

I am done with a book and have it formatted the way I want. I am exporting it to EPUB through InDesign CC and previewing it in iBooks and also through Kindle previewer. Everything is fine except for one thing... where I have created page breaks, the exported file is not including them.
I tried exporting to HTML just to see what it did and there is no line breaks there. I know its proprietary markup ( in kindle ) but I still would like to include them in a few specific places ( to mark seperations of chapters ).
In kindle this is the tag they say to use: <mbp:pagebreak />
In iBooks, I have not yet figured out how to create them, I am going to work on that today once I sort out the kindle version.
Is there any way to force it to include line breaks on export. Or alternatively, I could export to HTML but I am having trouble figuring out how to go back to the EPUB format from there and also it didn't include the fonts, so there was other issues to consider as I have a custom font I was using for the headers that looks really good and matches the font on the book cover as well... so I really want to keep that consistent if possible.
Are there any tricks or things I can try here to improve on my workflow and do a better job of seperating the chapters ?

Ok, I hadn't tested the advanced options out in the export menu. It works and does so on both the iBooks and Kindle previewer.. which is good news since that is really important to me to try and find a workflow I can update both of these formats from when I continue to work on my book.
The only strange part is that on some chapters its adding an extra blank page between the chapter and the next. What is odd is that it only happens on some of them (in the iBook reader only, the kindle previewer isn't doing this)
I am going to look into this more closely but its not a major deal as I would prefer a little seperation in the chapters anyways, its not really a bad thing. It is just hard to figure out why its doing this.

Do not include some lines in Subtotals and totals in ALV

Hello All,
I am printing a report with all sale order details and Quantities( delveered ,conformed etc..) iam doing subtotals based on the material and Plant.
In this if the document date is less than the SY-DATUM, we should not include the quantity into the subtotals and totals, Only the orders wiht doc date GQ to Sy-datum then display them..
As of now I am using ALV grid display and doing the sums by
l_wa_fcat-do_sum = c_x. (field catalog) for the whole colom) but i want to avoid sum row from tehe calculation based on the condition.
<b>Do we have any way to achive this, like if we want to have separate color for a purticular Cell then we add an extra field in outout table and we link this field with layout-coltab_fieldname in the same way or any other way if we have</b>.
I will be thankfull to if you can provide me your valuable suggesstions on this. it is very urgent. I am trying in all the ways from my side.

Hi,
see this code,
Complete code for the ALV grid example
This example shows and ALV grid with flights. After selecting a line a change button can be pushed to display a change screen. After the changes have been saved, the ALV grid screen is displayed again, and the grid is updated with the changes.
The example shows:
How to setup the ALV grid
How to ste focus to the grid
How to set the title of the grid
How to allow a user to save and reuse a grid layout (Variant)
How to customize the ALV grid toolbar
Refresh the grid
Set and get row selection and read line contents
Make and exception field (Traffic light)
Coloring a line
Steps:
Create screen 100 with the ALV grid. Remember to include an exit button
Add a change button to the ALV grid toolbar
Create screen 200 the Change screen
The screens:
The code:
   REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
   TYPE-POOLS: icon.
   TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
   CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L   I N T E R N A L   T A B L E S
   *DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
   TYPES: BEGIN OF st_sflight.
           INCLUDE STRUCTURE zsflight.
      Field for traffic light
   TYPES: traffic_light TYPE c.
      Field for line color
   types: line_color(4) type c.
   TYPES: END OF st_sflight.
   TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
   DATA: gi_sflight TYPE tt_sflight.
G L O B A L   D A T A
   DATA: ok_code         LIKE sy-ucomm,
    Work area for internal table
         g_wa_sflight    TYPE st_sflight,
    ALV control: Layout structure
         gs_layout       TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
   DATA:
     go_grid             TYPE REF TO cl_gui_alv_grid,
     go_custom_container TYPE REF TO cl_gui_custom_container,
     o_event_receiver    TYPE REF TO lcl_event_receiver.
   DATA:
Work area for screen 200
     g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
   DATA:
Internal table
     gi_index_rows TYPE lvc_t_row,
Information about 1 row
     g_selected_row LIKE lvc_s_row.
C L A S S E S
   CLASS lcl_event_receiver DEFINITION.
     PUBLIC SECTION.
       METHODS:
        handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
          IMPORTING
            e_object e_interactive,
        handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
          IMPORTING e_ucomm.
   ENDCLASS.
      CLASS lcl_event_receiver IMPLEMENTATION
   CLASS lcl_event_receiver IMPLEMENTATION.
     METHOD handle_toolbar.
Event handler method for event toolbar.
       CONSTANTS:
Constants for button type
         c_button_normal           TYPE i VALUE 0,
         c_menu_and_default_button TYPE i VALUE 1,
         c_menu                    TYPE i VALUE 2,
         c_separator               TYPE i VALUE 3,
         c_radio_button            TYPE i VALUE 4,
         c_checkbox                TYPE i VALUE 5,
         c_menu_entry              TYPE i VALUE 6.
       DATA:
           ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
       CLEAR ls_toolbar.
       MOVE c_separator TO ls_toolbar-butn_type..
       APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
       CLEAR ls_toolbar.
       MOVE 'CHANGE'        TO ls_toolbar-function.
       MOVE icon_change    TO ls_toolbar-icon.
       MOVE 'Change flight' TO ls_toolbar-quickinfo.
       MOVE 'Change'        TO ls_toolbar-text.
       MOVE ' '             TO ls_toolbar-disabled.
       APPEND ls_toolbar    TO e_object->mt_toolbar.
     ENDMETHOD.
     METHOD handle_user_command.
Handle own functions defined in the toolbar
       CASE e_ucomm.
         WHEN 'CHANGE'.
           PERFORM change_flight.
       LEAVE TO SCREEN 0.
       ENDCASE.
     ENDMETHOD.
   ENDCLASS.
S T A R T - O F - S E L E C T I O N.
   START-OF-SELECTION.
     SET SCREEN '100'.
   *&      Module USER_COMMAND_0100 INPUT
   MODULE user_command_0100 INPUT.
     CASE ok_code.
       WHEN 'EXIT'.
         LEAVE TO SCREEN 0.
     ENDCASE.
   ENDMODULE.                 " USER_COMMAND_0100 INPUT
   *&      Module STATUS_0100 OUTPUT
   MODULE status_0100 OUTPUT.
     DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
       l_layout TYPE disvariant,
Utillity field
       l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
     DESCRIBE TABLE gi_index_rows LINES l_lines.
     IF l_lines > 0.
       CALL METHOD go_grid->set_selected_rows
           EXPORTING
             it_index_rows = gi_index_rows.
       CALL METHOD cl_gui_cfw=>flush.
       REFRESH gi_index_rows.
     ENDIF.
Read data and create objects
     IF go_custom_container IS INITIAL.
Read data from datbase table
       PERFORM get_data.
Create objects for container and ALV grid
       CREATE OBJECT go_custom_container
         EXPORTING container_name = 'ALV_CONTAINER'.
       CREATE OBJECT go_grid
         EXPORTING
           i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
       CREATE OBJECT o_event_receiver.
       SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
       SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
       l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
       gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
       gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
       gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
       gs_layout-info_fname = 'LINE_COLOR'.
       LOOP AT gi_sflight INTO g_wa_sflight.
         IF g_wa_sflight-paymentsum < 100000.
      Value of traffic light field
           g_wa_sflight-traffic_light = '1'.
      Value of color field:
      C = Color, 6=Color 1=Intesified on, 0: Inverse display off
           g_wa_sflight-line_color    = 'C610'.
         ELSEIF g_wa_sflight-paymentsum => 100000 AND
                g_wa_sflight-paymentsum < 1000000.
           g_wa_sflight-traffic_light = '2'.
         ELSE.
           g_wa_sflight-traffic_light = '3'.
         ENDIF.
         MODIFY gi_sflight FROM g_wa_sflight.
       ENDLOOP.
Grid setup for first display
       CALL METHOD go_grid->set_table_for_first_display
         EXPORTING i_structure_name = 'SFLIGHT'
                   is_variant       = l_layout
                   i_save           = 'A'
                   is_layout        = gs_layout
         CHANGING it_outtab        = gi_sflight.
   *-- End of grid setup -
Raise event toolbar to show the modified toolbar
       CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
       CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
     ENDIF.
   ENDMODULE.                 " STATUS_0100 OUTPUT
   *&      Module USER_COMMAND_0200 INPUT
   MODULE user_command_0200 INPUT.
     CASE ok_code.
       WHEN 'EXIT200'.
         LEAVE TO SCREEN 100.
         WHEN'SAVE'.
         PERFORM save_changes.
     ENDCASE.
   ENDMODULE.                 " USER_COMMAND_0200 INPUT
   *&      Form get_data
   FORM get_data.
Read data from table SFLIGHT
     SELECT *
       FROM zsflight
       INTO TABLE gi_sflight.
   ENDFORM.                    " load_data_into_grid
   *&      Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
   FORM change_flight.
     DATA:l_lines TYPE i.
     REFRESH gi_index_rows.
     CLEAR   g_selected_row.
Read index of selected rows
     CALL METHOD go_grid->get_selected_rows
       IMPORTING
         et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
     DESCRIBE TABLE gi_index_rows LINES l_lines.
     IF l_lines = 0.
       CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
            EXPORTING
                 textline1 = 'You must choose a line'.
       EXIT.
     ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
     LOOP AT gi_index_rows INTO g_selected_row.
       IF sy-tabix = 1.
        READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
       ENDIF.
     ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
     CLEAR g_screen200.
     MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
     LEAVE TO SCREEN '200'.
   ENDFORM.                    " change_flight
   *&      Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
   FORM save_changes.
     DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
     MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
     MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
     IF g_wa_sflight-paymentsum < 100000.
       g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
       g_wa_sflight-line_color    = 'C610'.
     ELSEIF g_wa_sflight-paymentsum => 100000 AND
            g_wa_sflight-paymentsum < 1000000.
       g_wa_sflight-traffic_light = '2'.
       clear g_wa_sflight-line_color.
     ELSE.
       g_wa_sflight-traffic_light = '3'.
       clear g_wa_sflight-line_color.
     ENDIF.
     MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
     CALL METHOD go_grid->refresh_table_display.
     CALL METHOD cl_gui_cfw=>flush.
     LEAVE TO SCREEN '100'.
   ENDFORM.                    " save_changes

Live paint bucket not including all lines

I'm creating a map with different shaded regions and have tried several times but the Live Paint tool is not including all the lines. There is a large area that is showing up as a single region, and all the other lines included in that area that should be designating different smaller regions seem to be ignored. am I doing something wrong? Thanks to all responders.
Leslie

Double Click the Live Paint tool when the dialog shows up check paint strokes which is off by default

Why are the Touch apps marked with the † for included, when they are infact not included?

Adobe you need to fix the Touch Apps and quit tricking people... Included† and it says "Touch Apps†"
This indicating that they are INFACT INCLUDED....
as it stands what you are realistically telling us is that none of the other products are included in the creative cloud only the touch apps... who ever you have setting this page up......
When it should say Not Included†

@DeLancieGalleries - It is not the email you purchased the apps with but the one you sign into the Creative Cloud with which will be the same. Relevant line 'a Qualifying Member must sign in to Creative Cloud from each of the Qualifying Touch Apps' from here http://store.adobe.com/store/en_us/popup/offer/touchapps.html.

How can I display images that are not included in any collection?

How can I display images that are not included in any collection (some filter or smart collection)? A smart collection with parameters "Collection - contains - empty field" does not work. Lightroom 5.

Thank you! Good idea! I ordered letters of the alphabet (space separated), and it works.

Why simple functions are not included in iPhone?

My iPhone is a wonderful piece of equipment I can't leave home without (in addition of my Amex card :-)) But for the life of me, I can't understand why Apple could not include functions which are pretty much standard with all other inferior mobile phones. Simple functions such as bluetooth transfer between phone or just saving important sms from iPhone to computer. Nokia has a great Nokia PCSuite; Motorola has very useful MobileTools which allows full sync between mobile phone and computer. I got to ask the question ... WHY? WHY? WHY? Is there any apps developer out there that can develop an apps similar to Nokia PCSuite or MobileTools. I will be the first one to pay for it.

Abbafan1972 wrote:
1. A better camera. For the cost of the phone I would expect at least a 5mp one.
Read about the megapixel myth. More megapixels does not mean a better camera.
2. A camera flash.
Let Apple know - http://apple.com/feedback
3. The ability to use your own custom message tone.
I hope not but see answer to number 2. People's ringtones in public can be annoying enough without giving them more choices to be annoying.
4. The way text messages are organised are a bit ar$e about face, no folder for sent messages, they are just in a continuous thread.
It's called a conversation.
5. A quicker way of sending text messages to a group of people.
Pretty quick after you create the initial group but see my answer to number 2.

Why are most of my keywords not included when I export images?

Why are most of my keywords not included when I export images?
Since starting with Lightroom 1, I've entered keywords into either of the two fields between "keyword tags" and "keyword suggestions" in the keywording panel. I was unaware that some keywords are more equal than others, or that Lightroom offered (or has added?) hierarchy support.
I recently stumbled into the news (to me) that Lightroom tags can be organized into a hierarchy, so I exported my keywords to a text file to examine. I hadn't unwittingly created any hierarchies, but an astounding fraction of the keywords were within square brackets. Sure enough, if I export an image, keywords within square brackets are omitted from the output (jpeg) file. How nice. Since I began with Lightroom 1, I've added nearly 1600 keywords.. Too bad most of them are coded wrong... so as not to accompany output that I create.
1.     What was I supposed to do, as a photographer beginning to use Lightroom, to enter keywords simply but reliably: what I type is what I get? I'd expected that's what the "just type here" interface would provide.
I especially dislike obtaining erratic results: most keywords are in square brackets, but a few are not. Of course, when I use a simplified interface, I should expect not to have access to some of the options or features. However, I shouldn't inadvertently trigger undocumented behavior.
2.     Does the Adobe reference help system say how to enter keywords simply and reliably, in its documentation of the keywording panel? I don't find my answer under the Keywords topic, within Home / Using Photoshop Lightroom 3 / Organizing photos in the catalog.
(I NOW realize that the instructions for the "Create/Edit keyword tags" dialog mention exporting. However, that's not the method I was using.)
Dick Rawson

I'm afraid that I distracted you with my background mention of hierarcharial keywords; I'm not asking about them.
I've entered keywords for several years of using Lightroom. Suddenly, this week, I find that most (yet not all) of them have the attribute of "don't include the keyword in an exported file's metadata." I never intended to ask for that; I thought all keywords will stay with the file and its offspring, and that's what I wanted.
So I'm asking:
1.     What did I do "wrong" to induce Lightroom to give the keywords that attribute? I never intended to ask it to.
2.     Where does Adobe document how to enter keywords reliably so that they stay with the file on output? I can't find that Adobe does.
> Can you be more clear about keywords in square brackets? I know when you export the keywords as a list you can get a normalized data file that uses punctuation and tabs as delimiters...
I did export the keywords into such a list: most keywords in the plain-text list have square brackets surrounding them, indicating keywords that will be omitted from metadata of any image that Lightroom exports.
My concern is not that the brackets are there. They encode the attribute of "don't include the keyword in an exported file's metadata," and recognizing that attribute concerns me.
> ...but I've never seen keywords in image files or in the interface rendered so.
I haven't, either.
Dick Rawson

Are there liner notes for digital download albums?

I just started purchasing albums via digital download and I was wondering if there was a digital equivalent to the liner notes you used to get with vinyl albums? I also noticed there are no composer credits listed with the songs.
I used to learn alot about the music industry from reading all the stuff written on those notes both on the back of albums and inside or on the dust covers.
No to meantion what about albums which came originally with lots of photos or booklets? Do they make these things available for download when you purchase the digital albums? They should in some kind of PDF form.

If the album doesn't have iTunes Extras, of which there are few, there are no liner notes provided and you'll have to look to other web sites for that sort of information.
Regards.

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic? Is this possible?

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
Is this possible?

You can set any song to Skip when shuffling.
In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library.

Documents are not included in COPA

Hi COPA Experts,
The accounting documents are not included in COPA KE21N settings. could you please assist us how to include accounting document in COPA.

Hi,
Normally things from SD will be linked to COPA by linking the condition types in SD to Value fields in COPA.
Similarly we can do the assignments for direct postings from FI also through the PA transfer sturcture for dicrect postings.
Goto KEI2, Select the Structure FI, select the source fields and select the direct costs/revenues item and double clieck on the source fields, here give the range of the GL accounts (expenses for irect costs, income Gl accounts for revenues) for which you want the direct postings to reflect in COPA.
Selest the vlue field and give the valur field for the same.
Due to these settings we can get all the transactions (incomes/expenses) that we directly posted in FI to come into COPA.
And additioanlly when we are making a posting it is mandatory that we have to give the profit segment in the transaction you make.
Define the profit segment and assign it in the profit center, later in the posting selest the segment and this will act as a cost object that will help things to be reflecte in COPA.
Otherwise the posting will not be reflecting in the COPA report.
Hope this helps.
Thanks,
Shilpa.

Are VTP config lines not included in configurations?

Similar Messages

Maybe you are looking for