Are we missing any Management Packs for newly installed services/applications
Hello!
Would it be possible to get a report or alarm when new server roles, services, applications etc. are installed on the monitored Windows Servers in SCOM 2012 SP1, but there are no Management Packs installed to monitor the new services?
For example on a newly provisioned Windows Server, the customer installs SQL 2008, but we don’t have the SQL 2008 SCOM Management Pack. How can we get a notification that we have a new Service installed there but no MP to monitor it.
Best Regards,
Mario Patov
Mario Patov
Hi,
Based on my knowledge, it’s a little difficult.
I recommend you use SCOM to monitor a txt which create by sc query command.
For more information, please review the link below:
Sc query
http://technet.microsoft.com/en-US/library/dd228922.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
SCOM 2012 R2 Management Packs for monitoring IBM Tivoli
Are there management packs available to monitor IBM Tivoli through SCOM 2012 R2?
If yes, what all components in IBM Tivoli family can be monitored?
Thanks in advanceHi,
I think if there is any Management Pack for IBM Tivoli, then this Management Pack should be provided by IBM, and this may be fee-based also, I would like to suggest you contact IBM for this.
And hope the below link be helpful:
http://unofficialsystemcentercatalog.wordpress.com/2012/12/27/operations-manager-is-there-a-management-pack-for/
Regards,
Yan Li
Regards, Yan Li -
Oracle Application Management Pack for Siebel
Does anyone on this board have any experience with the Oracle 10G Grid Control software and the Oracle Application Management Pack for Siebel. The installation of the Oracle Enterprise Manager Grid Control with the Siebel Management Pack has been successful on the Windows 2003 servers and we can view a list of the servers within Oracle's OEM tool. The problem I am facing is when I try to add a Siebel Enterprise. I receive the following error when I attempt to add a Siebel Enterprise.
An error occured while adding Siebel Enterprise.
Credentials - Missing Credentials for host <HOST_NAME>
All of the credentials have been added properly. Does anyone have any experience or success using this product? If so please reply with feedback.
.Please log a service request with tech support so that we can track this inquiry. On the service request, capture a screenshot of the page where you defined the host preferred credentials, and tell us the names of your servers.
Btw, I take that you are stuck in the step in which you:
- Click the "Add Enterprise" button to add the enterprise
- Fill in the 7 parameters
- Click Ok to start the discovery process
Which release of Siebel and Enterprise Manager are you using?
Chung -
How to install Oracle Change Management Pack for 11g database.
Hi,
I need to setup "Oracle Change Management Pack" for my oracle11g database. Can any body help to do the same. i am able to configure following.
Oracle Configuration Management Pack
Oracle Data Masking Pack
Oracle Diagnostic Pack
Oracle Tuning Pack
using following URL
http://docs.oracle.com/cd/B28359_01/license.111/b28287/options.htm#CIHBGJCC but not able to install "Oracle Change Management Pack for 11g database". Can any body share any pointers if any...
Regards
DBA.As far as I could understand, this is a part of Oracle EM/Grid installation:
The sections that follow describe the Oracle management packs. The management packs can be purchased only with Enterprise Edition. The features in these packs are accessible through Oracle Enterprise Manager Database Control, Oracle Enterprise Manager Grid Control, and APIs provided with Oracle Database software. -
UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error
We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
"The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
Has any dealt with this issue successfully, or have any insight into the problem?Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.
-
In our newly installed Operations Manager I'm trying to install the MP's for monitoring Windows Server 2008 OS through the catalog option. Every attempt (including downloading it through the OpsMgr console) fails with the following error:
Windows Server 2008 Operating System (Monitoring) did not pass the security verification.
The management pack cannot be downloaded and the temporary file has been deleted.
Could not load management pack [ID=Microsoft.Windows.Server.2008.Monitoring, Keytoken=31bf3856ad364e35, Version=6.0.7296].
This includes the required packs: "Windows Server Operating System Library v6.0.7296" and "Windows Server 2008 Operating System (Discovery) v6.0.7296".
The only option I found was downloading it directly from the website http://www.microsoft.com/en-us/download/details.aspx?id=9296 but I'm a bit anxious if it can't be downloaded from the catalog. Is this pack revoked? Or could there be something wrong
in our environment that prevents us from downloading it from the catalog?I have the exact same issue - and when I select to download from the catalog, I get an error that the security certificate cannot be verified. I checked it, and it is valid till 2016, so I selected continue and then it works normally. however I do get the
same list of errors.
The normal "manual" download is available, and if it was pulled by MS, they would block the download button there too ?
I downloaded the MP manually and installed it without any issues. same for the sharepoint 2010 MP 14.0.7135.5000 mp. installing via the catalog failed while the manual download was available and works OK.
(and the weird thing is - I downloaded / installed a few other updates via the catalog fine....)
System Center Management Pack for Windows Server Operating System (mp download)
Microsoft SharePoint 2010 Products Management Pack for System Center Operations Manager 2007 (mp download) -
HP Managment Pack for Monitoring Gen8 Server DMS Service can be clustered or not.
Hello ALL,
I am trying to configure HP Managment Pack for Monitoring Gen8 Server monitoring and i have encoutered very small problem but it is now a big problem for me. Currently we have deployed one server to monitoring the HP Gen8 Server
Esx monitoring. But we want to create DR Site where we want to add same devices which will help us to failover when existing server will be down or HP DMC Service is down. Any one have tried this solution please let us know in DR or cluster way.
Omkar umarani SCOM STUDENTHi,
If you are looking for SCOM cluster way to monitor Gen8 Server, then we can build multi management servers within the management group, or create multi management groups to monitor Gen8 server.
More details:
http://technet.microsoft.com/en-us/library/hh298610.aspx
And if you are looking for ways to failover HP DMC serice, then I would like to suggest you post in the HP forum.
Regards,
Yan Li
Regards, Yan Li -
Management Pack for Office 365
Is there Management Pack for Office 365 for Operating Manager 2012 R2/
Hi,
Monitoring Office 365 using System Center Operations Manager (SCOM)–Management Pack
http://www.agileit.com/news/monitoring-office-365-using-system-center-operations-manager-scom-management-pack/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Need Management packs for mpseal
Hello,
I need this MP to seeal another MP, can somone tell me from where to dld them?
Could not load management pack [ID=Microsoft.SystemCenter.Library, KeyToken=31bf3856ad364e35, Version=7.0.8433.0].
I found http://systemcentercore.com/?Get-ManagementPack=Microsoft.SystemCenter.Library&Version=7.0.8433.0
Nut this is the MPB not MP, how do i unpack it?
Br,
AdrianNo management pack for MPSeal. Management packs are sealed by using the MPSeal tool that is located in the SupportTools folder of the Operations Manager 2007 R2 distribution media. This is a command-line tool that creates a sealed .mp file from an unsealed
.xml file. After performing the sealing process, you can install the sealed management pack in your management group.
For Seal Management pack, you can check below link
http://blog.coretech.dk/msk/opsmgr-seal-a-management-pack-step-by-step/
For above issue, you can refer below link
http://www.systemcentercentral.com/forums-archive/topic/mpseal-fails-with-the-management-pack-was-not-found-in-the-store/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Management Pack for Windows Server 2008 Enterprise SP1
Hello,
I tried to manage the performance of a Windows Server 2008 Enterprise SP1 (6.0.6001) but SCOM 2007 R2 just check the availability with a ping status.
I have installed the normal management packs:
On the same SCOM, I have servers with Windows Server 2008 R2 and they work perfect.
What can I do?Hi Journey Tinoco,
Performance can be monitored by using the active alerts TAB where a alert / alerts will be triggered based on the default management pack which you have installed / imported or if you have created a custom monitor based on your preference on what performance
counter you want to monitor on windows server 2008 servers VIA SCOM.
Or you can pull server performance report specific for Windows server 2008 from the reporting TAB as per the below screen shot for details.
The one which you are opened is the health explorer view which is not showing much details.
Go to reporting TAB ===> Select Windows server 2008 operating system monitoring and then What ever appropriate report you need to pull based on your requirement. For example i have pulled a report below for "Operating system performance.
Over here Click object and select the computer name and the icon should be a Windows serve / Computer as per the icon in my screen shot below. Select the time and date from and to the report you want and dont touch the add object option. Once done click
the Run button on the left to you will get the report as below.
Please note: If the below report is what you are looking for is not available in your SCOM's reporting TAB. Then you have not installed the reporting Management pack for Windows server 2008 monitoring. Download
it from the below link.
http://www.microsoft.com/en-in/download/details.aspx?id=9296
Hope this helps you.
Gautam.75801 -
SCOM Management pack for Checkpoint Firewall & Fortigate UTM
HI ,
Any body knows that is there Management pack for Checkpoint ( <cite>www.checkpoint.com ) </cite>and
Fortigate Appliance ( http://www.fortinet.com/products/fortigate/index.html ).
please advise me.
Regards, COMDINIHi,
If you cannot find them in system center marketplace:
http://systemcenter.pinpoint.microsoft.com/en-US/home
you can contact the vendors for management pack.
Alex Zhao
TechNet Community Support -
I've installed the UCS management pack for Microsoft SCOM 2007 R2. It appears to be working, however I now keep seeing all computers that have the SCOM agent installed trying to run the cisco.ucs.computer.probeaction.vbs script, which fails and generates alerts. Does anyone know why these servers that are unrelated to UCS would be trying to run these scripts, or how to fix this problem?
The Problem is that you use an “&” string in a name of one of the protection Groups.
Change the name of the protection Group where you have used an “&” symbol
. Restart the “System Center Management” and you should see that the discovery success.
If still have same issue, started to register the differtent dll’s again on the machine and apparently registering the MOMScriptAPI.dll
http://scug.be/dieter/2012/11/08/scom-event-id-21406-file-name-or-class-not-found/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Configuration Managment Pack for Non Oracle Systems (new)
Hi ,
There is a pack called "Configuration Management" for the database. This pack manage hardware , software , updates, patches, etc for host that have installed any Oracle Software.
Now, in EM Release 2 there is a new pack "Configuration Managment Pack for Non Oracle Systems" wich basically will allow me to the same but without the requirement to have any Oracle software installed.
The question is : Where can i find a white paper about it? i been looking around and there is only mentions of the product, but not extra info. I know is out already 3k p/processor..
Any ideas?
Sergio BenavidesFound this dated Oct 2005
(Note the "priced in Advance of Availability" piece)
Standalone Managers
Configuration Management Pack for Non-Oracle Systems (priced in Advance of Availability) 2.375 522,59 Per Processor -
Provisioning Pack (priced in Advance of Availability) 2.375 522,59 Per Processor -
Service Level Management Pack (priced in Advance of Availability) 79 17,42 Test -
(Must license with Beacon Plus Test pricing) 2.375 522,59 Beacon -
System Monitoring Plug-in for Hosts (priced in Advance of Availability) 1.188 261,29 Per Processor -
System Monitoring Plug-in for Non Oracle Databases (priced in Advance of Availability) 1.188 261,29 Per Processor -
System Monitoring Plug-in for Non Oracle Middleware (priced in Advance of Availability)
25 1.188 261,29 Per Processor -
System Monitoring Plug-in for Network Devices (priced in Advance of Availability)
26 1.188 261,29 Per Network Device -
System Monitoring Plug-in for Storage (priced in Advance of Availability)
27 -
Windows client monitoring Management packs for SCOM 2012
Hello All,
Please provide the link for windows client monitor management pack for SCOM 2012 SP1 ,if there is any available .
I have got one link for this but it is for SCOM 2007 .
Regards
Richa KMhttp://www.microsoft.com/en-us/download/details.aspx?id=15700
Yes you can download from this link and you can import it in scom 2012 sp1.although it is for scom 2007 -
SCOM 2012/SP1/R2 - What Is the Best Management Pack for HP Storage (P2000)
Hi all!
What would be the best recommended Management Pack for HP Storage (P2000) for the SCOM 2012/SP1/R2? Free products are privileged, of course, but we would also consider the paid ones.
Thank you very much for your time and attention!
Best regards!Hi,
Recently I created Custom Management pack for MSA P2000 Storage. Its primary purpose is to monitor performance.
See: http://jurelab.wordpress.com/ for details.
Hope it helps
Jure
Maybe you are looking for
-
HP officejet pro 8500 A909g Can not send emails from scan to e mail & Forward My Fax on Emails
I have Windows 7 home Premium os, My earlier router malfunctioned so have installed new Dlink router DSL-2750U and after that i am not able to use scan to email & Fax to email options. Email id to forward mail is a gmail id. Please advice
-
Action menu background is clear.
Hello, Someone using one of my applications sent a screenshot of the Actions menu of a Interactive Report. The background of the menu that drops down is clear (no background color) so you can see the report through it. They are using IE. Has anyone s
-
hello all, ive recently setup a cisco modem with a linksys wrt54g i had lying around for a friend. i enabled the security (WPA/WPA2) and changed the name for the wireless connection. I restart every thing and i see the new name wireless secured con
-
Does Photoshop Elements use the GPU?
I cannot find a difinitive statement as to whether Photoshop Elements uses the GPU or not. I am about to buy a new computer and I am trying to determine if I should spend the money to get a higher end graphics card or not. The two options in the comp
-
How to add audio to SpeedUpPro???
How do you add files to SpeedUpPro? This is the app: https://itunes.apple.com/au/app/speedup-player-pro/id385026296?mt=8 Thanks!