Are Wildcards possible for host name in "no proxy for" setting?

Our LAN requires a proxy for internet access. I need to bypass proxy for certain host names, as the proxy blocks many ports.
Things work if I enter the entire host name. But there are many, so I wish to use wildcards in the host name.
That does not seem to work.

There is no solution for host names and wild cards as far as I know. That is why I showed how to do this with the IP.
Does it work if you only specify the top level domain if you want to include other domains with the same postfix?

Similar Messages

  • SAP_HTTPServicePort URLs in SLD for PI are updated by SLD host name itself

    We have upgraded our PI 7.0 to 7,1. We have a central SLD. After the upgrade, SAP_HTTPServicePort URLs (in SLD Content maintenance) for the PI are all getting initialized with SLD host name itself.
    Example: for port.CIDX.af.pip.<PIPhostname>
    URL: http://solman:50100/MessagingSystem/receive/CIDXAdapter/CIDX
    solman is my central SLD.
    This is happening in our production system only. In Dev/QAS systems, the behavior is normal like
    http://PIDHostname:50000/MessagingSystem/receive/CIDXAdapter/CIDX
    I have tried to update the URLs manually, but, when the instance is bounced, the SLD is getting refreshed with the erroneous URLs.
    I want to know where from the SLD content is refreshed?

    There are two ways....
    Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
    Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
    Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
    regards,
    Arvind R

  • What are all the itunes host names (IPs) about?

    I monitor downloads with a tool called matrixstats. I am currently  in the process of filtering to remove hits from spam bots, robots and web crawlers from the statistical reports. The itunes IP 17.* is the most aboundant host name recorded. Is the itunes store acting as proxy for podcast subscribers and listeners or are the hits from robots and web crawlers checking for updates to the podcast.
    List of filtered IPs:
    17.184.84.0
    17.184.84.35
    17.154.84.36
    17.154.84.37
    17.154.84.38
    17.154.84.39
    17.154.84.40
    17.154.84.41
    17.154.84.42
    Does this refer tag refer to a user requesting a podcast download through the itunes store?
    iTunes/11.0.2 (Windows; Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)) AppleWebKit/536.27.1
    Is the reference to iTMS one to a robot? If it is do you have its ip address so I can refine my filter.

    All this is outside my experience, and I've asked to have your question moved to the iTunes for Windows forum where you are more likely to come across a suitable guru.
    However one thing I can tell you is that when someone goes to the iTunes Store page for a podcast and subcribes from there, all it does is set his own copy of iTunes to access the feed - the Store is no longer involved, so subsequent hits on the feed come from the subscriber's computer, not from the iTunes Store; and so the IPs would be those of the domain hosting the feed.
    'itms' is the protocol (like http) used in the link from the web page version of an iTunes Store podcast page - where it says 'view in iTunes' - the protocol is associated on Macs with iTunes and so opens the program and calls the Store page for the podcast in question. In Windows you may have to deliberately associate this protocol with iTunes (which of course is not on the computer by default as with Macs).
    For any more info I hope someone in the other forum can help you.

  • Are there guidelines for setting up a secondary central administration?

    We created a multiple server SP 2010 farm to have some redundancy.
    One of the things I am trying to figure out is how to set up a second central admin in case the server on which central admin resides has to be taken down for repair.
    Is this functionality even possible?
    If not, then I won't bother with it right now.
    But if it is, I want to get things set up to handle this case.
    Thank you so much for sharing your experience.

    Yes, it is possible. Refer to the following post for more information
    http://blog.fpweb.net/how-to-run-sharepoint-central-admin-on-two-servers/#.VFhZyPmUcsY
    http://www.mssharepointtips.com/tip.asp?id=1006
    Cheers,

  • Cannot resolve host names on local network

    It is a local network with router, few Windows computers with shared drives and one Mac.
    Windows shares appear correctly in SHARED and can be used without any problems, like iTunes and iPhoto libraries are on those shared drives and work properly, even if ip address of those computers would change.
    BUT - if I am trying to use VNC and connect to hostname:port, it says that server is not specified. If I try to ping hostname it says Unknown host.
    At the same time, similar ping from Windows computer work without any problems.
    It could be possible that router does not support something standard and communicates with Windows using something windows-specific, but what confuses me is that I can see computer names resolved in the finder already! Also, as I said iTunes and iPhoto can work with shared files on dynamic ip's which would be not possible if host names would be not resolved.
    Thanks.

    Domain Name Resolution for local IP addresses require a Local DNS server running on your network.
    Bonjour names will resolve without a Local DNS server. So this is why iTunes and iPhoto works as they use bonjour technology.
    A bonjour name ends in .local so in your macs sharing preferences you give the mac a name of imac its bonjour address is imac.local
    Other than that you are best giving your devices fixed IP address and adding there hostnames to your hosts file.
    the contents of /etc/hosts on your mac would look like
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting. Do not change this entry.
    127.0.0.1 localhost
    255.255.255.255 broadcasthost
    ::1 localhost
    fe80::1%lo0 localhost
    so at the above that you could add for example
    192.168.1.5 mypc
    192.168.1.6 myprinter
    Then you could ping 192.168.1.5 by
    ping mypc
    So would have to add these entries to each hosts file on every computer on your lan.
    Or you could setup a local dns server and give each computer on your LAN a fully qualified domain name.

  • Guidelines for setting Application Module Pool Size Parameters?

    Are there guidelines for setting the application module pool size parameters, such as initial pool size, maximum pool size, etc., based on the expected number of users or other factors? I've read the developer guide sections (ch 28-29), but still don't have a good feel for how to correctly set the optimal values for the pool configuration parameters? Even more importanty, how do I monitor the pool's efficiency during runtime to determine if the pooling parameters are configured correctly?
    This will be critical to performance and scalability, so I'm looking for a way to get some visibility into how the pooling is working during production operation to assess whether there are bottlenecks/constraints/ineffeciencies?
    Note I am using Tomcat as the java runtime container; ADF BC / JSF jdev 10.1.3.1
    Thanks in advance and Merry Christmas!

    KUBA - were you able to resolve these issues and if so are there any lessons learned you can share?
    I'm hoping someone from the ADF team can answer our original question including guidelines for setting pool parameters and how to monitor the pool's performance while running in production.
    thanks

  • What are the userid,password, and host name for oracle 9i?

    HI Guys.
    I am a research student at the University and the I recently downloaded Oracle 9i for my research. But the problems is also with seting it up. Please could you show me the userid, password, and host name for oracle 9i.
    Thanks in advance for your cooperations.
    Malinga R
    [email protected]

    I believe that starting with 9.2, you have to specify different passwords when you install (can't be the default).
    Justin

  • We have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc. from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when

    Hello All,
    we have created shared folder on multiple client machine in domain environment on different 2 OS like-XP,Vista, etc.
    from some day's When we facing problem when we are access from host name that shared folder is accessible but same time same computer when we are trying to access the share folder with IP it asking for credentials i have type again and again
    correct credential but unable to access that. If i re-share the folder then we are access it but when we are restarted the system then same problem is occurring.
    I have checked IP,DNS,Gateway and more each & everything is well.
    Pls suggest us.
    Pankaj Kumar

    Hi,
    According to your description, my understanding is that the same shared folder can be accessed by name, but can’t be accessed be IP address and asks for credentials.
    Please try to enable the option below on the device which has shared folder:
    Besides, check the Advanced Shring settings of shared folder and confrim that if there is any limitation settings.
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • What's the reason for this message, "A server with the specified host name could not be found" ? I'm using iPhone 4s, 16gB, iOS 7.0.4

    I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
    I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
    THANKS

    Hello Paneesh,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s.  I recommend the following steps:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
    Move closer to the Wi-Fi router (access point).
    Check for sources of potential interference.
    Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    You can find the full article here:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Entry for host name is missing or empty (Secure Store key: admin/host/).

    Hi All,
    I am in the process of installing EP7 on SLES9 and MaxDB 7.6 on a clustered HA environment where the SCS, DB and JC components are installed under and referenced by their virtual hostname (eg. sapinst SAPINST_USE_HOSTNAME <virt name>).
    The SCS instance is installed, the Database Instance is installed and I'm currently in the process of Installing the JC and Deploying the EP packages. 
    During the installation, SDM is put into standalone mode and sapinst tries to deploy the package EPBC06_0.SCA where it fails and the sdm_server.err shows :
    "com.sap.sdm.serverext.servertype.inqmy.TargetEngineConfigurationException: Cannot retrieve Engine logon data from Secure Store: Entry for host name is missing or empty (Secure Store key: admin/host/).        at com.sap.sdm.serverext.servertype.inqmy.InQMyTargetSystemConfigurator.getLoginDataFromSecStoreInQMyTargetSystemConfigurator.java:286)        at com.sap.sdm.serverext.servertype.inqmy.InQMyTargetSystemConfigurator.getEngineLoginDataInQMyTargetSystemConfigurator.java:197)        at com.sap.sdm.serverext.servertype.inqmy.EngineStateServiceImpl.determineCurrentEngineStateEngineStateServiceImpl.java:53)        at com.sap.sdm.app.proc.deployment.states.State.determineJ2EEEngineState(State.java:97)        at com.sap.sdm.app.proc.deployment.states.StateBeforeFirstDeployment.getJ2EEEngineStateChangeDescriptionStateBeforeFirstDeployment.java:75)        at com.sap.sdm.app.view.proc.deployment.mapper.StateMapper.map(StateMapper.java:56)        at com.sap.sdm.app.view.proc.deployment.mapper.FlowMapper.map(FlowMapper.java:28)        at com.sap.sdm.app.view.session.AppViewUpdater.updateAppView(AppViewUpdater.java:22)        at com.sap.sdm.app.view.session.AppViewUpdater.sessionStateChanged(AppViewUpdater.java:18)        at com.sap.sdm.app.proc.deployment.impl.SessionStateObserversImpl.notifySessionStateChangedSessionStateObserversImpl.java:46)        at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:85)        at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)        at com.sap.sdm.app.view.controllers.DeployEventProcessor.processEvent(DeployEventProcessor.java:11)        at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.processEvent(DeployCmdProcessor.java:264)        at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.process(DeployCmdProcessor.java:108)        at com.sap.sdm.gui.server.GuiAdminRoleCmdProcessor.processGuiAdminRoleCmdProcessor.java:72)        at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)        at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommandCmdServer.java:76)        at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286)        at com.sap.sdm.is.cs.ncserver.NetCommServer.serveNetCommServer.java:43)        at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serveServiceWrapper.java:39)        at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)       at java.lang.Thread.run(Thread.java:816)"
    The same problem occurs if I try to deploy this package or any other package using SDM in standalone or integrated mode. 
    configtool -> Secure Store -> admin/host/<SID> is the virtual hostname of the JC instance.
    I've tried the following to no avail:
    - Changed configtool -> Secure Store -> admin/host/<SID> to be the physical hostname of the box.
    - Changed configtool -> Server -> Dispatcher -> Service -> P4 -> bindhost (from 0.0.0.0 to JC virt IP).
    - Changed the <Host> entry in sdmrepository.sdc from <phys hostname> to <jc virt hostname>.
    The SAPLOCALHOST, SAPGLOBALHOST all seem to be set correctly in the SAP profiles.
    Has anyone had this issue?  If so, what do I need to check/change?  Any ideas?
    Notice the message does not reference the <SID> in "admin/host", could this be related to the issue?  If so, what can cause this?
    TIA
    Anthony

    Hi All,
    Just an update, I was able to get around my problems by patching the 2004s media from sp6 to sp8, uninstalling my scs, and database and re-installing from the patched media.

  • After specifying the external host name under outlook anywhere, users pop up for password

    Dear All,
    I have installed and configured exchange 2013 as a fresh installation on server 2012 and it worked fine till i changed
    specifying the external host name under outlook anywhere(in exchange ECP -> Server -> server -> W12R2-Email2013).
    My internal domain is starnavigator.lk and we have several accepted domains listed. but all the staff checked web mail through
    mail.leoburnett.lk internally and externally. even now web mail is working fine.
    After i added external host name as mail.leoburnett.lk
    all the internal PCs start to pop up for user name and password and its not  connecting. 
    even if I reversed back the settings, still prompt for user name and password. also auto discover cant locate the settings. if i configure the settings manually, i t works for first time and after restarting outlook, again prompt for name and password.Any
    any advice or solution please??
    Thx,
    Dulana

    Run this tool and post the result (only errors)
    https://testconnectivity.microsoft.com/
    After configuring outlook manually, run Test E-Mail Autoconfiguration and Connection Status and post the result.
    Editing just an URL for OA shouldn't cause any issue.
    Did you restarted IIS Service?
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • How to change host name for SLD

    Hi All,
    How is possible to change host name of SLD configuration?
    I want to change my portal host name used for SLD configuration from aaa.bbb.net to aaa.ccc.net.
    How can i do it?
    Thanks a lot!
    Alex

    Hi,
    you can change it in System Landscape directory.
    Go to the http:yourportal.com:50000/sld
    then click on the Landscape and update the new host name.
    Raghu

  • Email host name for mailbean

    Hi, I have a problem about finding my own email host name when I am trying to send an email within JSP. I have tried many names such as: "mail.gmail.com"," yahoo.com", and the one included in the code blow. I think I have a misunderstanding about this host name, could anyone explain for me please? Thanks a lot.
    Blow is my code
    * Mail.java
    * Created on 2006&#24180;8&#26376;14&#26085;, &#19979;&#21320;2:59
    package myclass;
    import java.io.*;
    import java.util.*;
    import javax.mail.*;
    import javax.mail.event.*;
    import javax.mail.internet.*;
    * @author weiming514
    public final class MailBean extends Object implements Serializable{
    private String to = null;
    private String from = null;
    private String subject = null;
    private String message = null;
    public static Properties props = null;
    public static Session session = null;
    static{
    /** Setting Properties for STMP host **/
    props = System.getProperties();
    props.put("mail.smtp.host", "hostname");
    session = Session.getDefaultInstance(props, null);
         /* Setter Methods */
         public void setTo(String to) {
              this.to = to;
         public void setFrom(String from) {
              this.from = from;
         public void setSubject(String subject) {
              this.subject = subject;
         public void setMessage(String message) {
              this.message = message;
    /* Sends Email */
    public void sendMail() throws Exception{
    if(!this.everythingIsSet())
    throw new Exception("Could not send email.");
    try{
    MimeMessage message = new MimeMessage(session);
    message.setRecipient(Message.RecipientType.TO, new InternetAddress(this.to));
    message.setFrom(new InternetAddress(this.from));
    message.setSubject(this.subject);
    message.setText(this.message);
    Transport.send(message);
    catch(MessagingException e){
    throw new Exception(e.getMessage());
    /* Checks whether all propertises have been set or not */
         private boolean everythingIsSet() {
              if((this.to == null) || (this.from == null) ||
              (this.subject == null) || (this.message == null))
                   return false;
              if((this.to.indexOf("@") == -1) ||
                   (this.to.indexOf(".") == -1))
                   return false;
              if((this.from.indexOf("@") == -1) ||
                   (this.from.indexOf(".") == -1))
                   return false;
              return true;
    Error:
    unknown smtp host: hostname

    and the one included in the code blow.You have written "hostname" in the code below. Since "hostname" is certainly NOT a valid SMTP host name,
    that's why you get the error: unknown smtp host: hostname.
    What did you expect? You must provide a valid SMTP host name, NOT "hostname". You see the difference right?
    Try with your ISP (Internet Service Provider) SMTP host name.
    It should be something like: stmp.somename.com.
    That's the one you must set in your email client (Outlook, Thunderbird, Eudora, Lotus Notes, whatever) to send your emails.
    Next time please paste your code between &#91;code&#93; tags with the help of the code button just above the edit message area.
    Regards

  • Stored procedure for getting host name, host instance and status of that host is it running or stopped.

    Hello all,
    yesterday I got one task in that I have to stored procedure for getting host name, host instance and status of that host is it running or stopped.
    any body knows where exactly, In which table this details are there in BizTalk databases.
    thanks

    Status of the host instance is not stored in the SQL database for you to query the status using stored procedure. You have to either use Powershell or WMI to get the status.
    In SQL, following table contains the details about the host like Name, LoginName, IsDisables etc but status of the host instance is not stored in the database.
    SELECT * FROM BizTalkMgmtDb..adm_HostInstance
    Powershell to get the status:
    http://axonolympus.nl/?page_id=186&post_id=969&cat_id=6&lang=en
    WMI to get the status:
    https://msdn.microsoft.com/en-us/library/aa561820.aspx?f=255&MSPPError=-2147217396
    https://msdn.microsoft.com/en-us/library/aa578621.aspx
    Regards,
    M.R.Ashwin Prabhu
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Local node not included in the list of host names for grid installation

    I'm attempting to install clusterware on Solaris 11 on 2 nodes. I've tried tweaking the /etc/hosts file in a few different ways by including the fully-qualified name and without it for the localhost, but it still gives me this error every time. The runcluvfy.sh script doesn't run on Solaris 11. Does anyone know how to get around this problem?
    I've tried this using the silent install and with OUI, but got the same error both ways. This is the format of the node names:
    oracle.install.crs.config.clusterNodes=myLocalNode:myLocalNode-vip1,myOtherNode:myOtherNode-vip2
    [FATAL] [INS-40907] Local node not included in the list of host names for grid installation.
    CAUSE: The local node (the node where you are running the installer) was missing from the list of host names you provided.
    ACTION: Include the local node in the list of host names for grid installation.
    Edited by: 982828 on Jan 18, 2013 1:18 PM

    Hi,
    what Oracle Version are you trying to install?
    Best to directly start with 11.2.0.3 and look in MOS for certification, hints requirements.
    Regards
    Sebastian

Maybe you are looking for