Are Workflows Cross-clients

Hi Experts,
In my project. There are three different clients (on same server) for three countries.ie, Client - 620 for US, 820 for UK and 920 for Hong Kong. They are using standard Workflow 20000077 for PR Approval. I have received requirement for UK to add one more mail step in workflow. I modified the standard and added the step in client 820. But when i opened 620 and 920. The added mail step in visible in all clients.
My doubt is Are worklows Cross-clients??

hi tejal,
you are right , workflows are cross client.
u can ony chk while ur creating workflow template , in the status bar u can observe the message ' ur maintaing a cross-client objects'
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Thanks & Regards,
sravan.
Edited by: sravan on Sep 1, 2008 1:04 PM
Edited by: Alvaro Tejada Galindo on Sep 1, 2008 4:51 PM

Similar Messages

Cross Client Configuration in SAP PM

Dear SAP PM Expert,
Can anybody tell me what are the cross client configuration in SAP PM?
Regards,
Rahmad

Hello,
As per my knowlodge suppose if any configuration changes made in PM in one client these changes will be automatically changed in other clients even if you are not intended to change in other client.

CCM cross-client ?

Hello everybody,
A quick question:
I have SRM 4.0 and CCM 1.0 on my server with 3 clients created. I noticed that the CCM data is mixed over the 3 clients.
I mean, the CCM on client 120 displays the vendor used in CCM client 200 =( I checked my csv files but I dont have that value ! So.. I assumed that CCM has some data that is cross-client ?
Am I right ? Is there a way to avoid this ?
Regards from Mexico =)
Diego

Hi Diego,
I think you make a mistake. The vendors in CCM are not cross client: to check that goto supllier data menu entry in the CCM, only the clients vendors are available.
Be more precise in your description of ypur issue, we'll try to find out.
Regards.
Vadim

Cross-client customizing are not permitted

Hi,
I am trying to remove "Transformation Object" in BI 7.0, QA server, and it not allowe to me access, I have SAP_ALL access
I am getting this error messages:
"changes to repository or cross-client customizing are not permitted"
I know we can't change anyitng in QA its goes through Transport, but the problem is DEV system this objects didn't show and QA this objects shows, so I want to remove this bi object from QA system
I know while installation NW 2004s its post installation steps to not change objects
in SE06 I am trying to change these objects to modifible but still not allow to changeable
please help me out

Hi Angeline,
In transaction SCC4 double click the client on which you are working. There will be a setting "Changes to repository or cross-client customizing are not permitted." Modify this option to "Automatic recording of changes."
Making that will allow you to delete the object.
Make sure after you achieve your desired objective, you revert back the client settings to "Changes to repository or cross-client customizing are not permitted." Also revert back the settings in SE06 in QA to the original what you had in post installation.
Regards
Sourabh Majumdar

SPDD "Changes to Repository or cross-client Customizing are not permitted"

Hi All,
While adjusting the std. ddic objects during upgrade from 4.6c to ECC 6 thru SPDD, I am getting the error message saying "Changes to Repository or cross-client Customizing are not permitted" Choose 'Display object' or 'Cancel'. I am making these changes in te Customizing 000 client
What could be the reason for this?
Helpful and timely answers will be gratefully rewarded!
Regards,
Karthik.

Hi
I think there are some settings with radiobuttons in some Basis transaction where we can adjust this, basis person knows about it
see the links reg SPDD
SPDD - http://help.sap.com/saphelp_erp2005/helpdata/en/2e/6d66587d9011d396b60000e82de14a/frameset.htm
SPAU and SPDD
http://www.sap-img.com/bc018.htm
Please refer the link,
Transaccion SPDD and SPAU
explaination of SPDD
Transaccion SPDD and SPAU
about spau & spdd
explaination of SPDD
Transaccion SPDD and SPAU
about spau & spdd
Regards
Anji

Error Changes to Repository or cross-client Customizing are not permitted

Hi
While creating infoset in SQ02 it is giving an error as "Changes to Repository or cross-client Customizing are not permitted"
I did change the SE06 system change options , software components modifiable.
And I also changed the objects changebility in transport connections in RSA1. But still it is giving the same error.....
Can you please let me know the solution?
Thanks

I'm assuming that you're creating a custom InfoCube query, so does it give you the option of creating as a Local Object (package $TMP) or one of your custom, transportable packages? Basically it's determining whether you want this InfoSet Query to be a Local Object or if you plan on transporting it throughout the landscape.
One other thing that I wanted to point out about security. SAP_ALL doesn't necessarily mean access to anything and everything. There are cases where the Authorizations assigned to an SAP_ALL Authorization Object don't necessarily have all of the correct assigned Activity for every transaction. Security, in your case, doesn't seem to be the problem because you're getting this request to assign a package.
Edited by: Dennis Scoville on Nov 4, 2009 2:39 PM

Cross Clients in SAP

Hi All
I would like to know how many cross clients are available in SAP for all modules

Hello Suresh,
Cross SystemIn some scenarios, the business process workflow is distributed in more than one system. It means the workflow is triggered in one system and executes some tasks and then triggers a second workflow in another system. Processing is done in the second workflow and again comes back to first workflow. This means there is a switch between workflows across systems. The major task is to pass data from one workflow to other.
Cross ClientLike Cross systems, we can have workflows talking across clients of same system. Example, Workflow is triggered when a Purchase Order is changed in system SYS 1 (Client 100). It determines the changes. Based on it, a work item is generated for approval of changes done. The agents (Suppliers) are in same SYS 1 but different client (Client 200). So, the Dialog task for Approval will be in client 200.
Can refer following links for more details :--
http://help.sap.com/saphelp_nw04/helpdata/en/57/38dea84eb711d182bf0000e829fbfe/content.htm
The specified item was not found.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d1c48f-de79-2c10-3bad-bbc343aacfdc?
QuickLink=index&overridelayout=true
Thanks and Regards
Rajesh

How to disable Cross client Table Access

Hi All,
i have created a Sand box client and i have set its cross client object value to
"No Changes to repository and cross client customizing objs"
but still users are able to run transactions like SR13 which are cross client tables
please help

HI Zeeshan,
Once u run the Tcode like SR13, the users would be able to enter the Tcode and have a new entry varinat created..but during SAVE the system would sure prompt the message... " Changes to Repository or cross-client Customizing are not allowed. Please press DISPLAY or CANCEL" ..
so the changes would not be saved hence forth and have to be cancelled out..
hope this is what u have been looking for..
Br,
Sri
Award points for helpful answers

How to create cross-client variant?

Hi Experters:
Can someone tell me how create cross-client variant in ECC6.0?
in 4.6, we can define the client or define cross-client transaction variant,
how to create cross-client variant in ECC6.0?
Regareds,

Hi,
In se93 there is a check box cross-client .
The Cross-client switch identifies which transaction variants are cross-client and which are client-specific. If the switch is set, the transaction variant is cross-client. If the switch is not set, the transaction variant is client-specific.
A client-specific transaction variant can only exist in the client where it was created. The field contents of the transaction variant only have to be available in the particular client. A cross-client transaction variant is available in the system regardless of which client is currently active. The field contents of the transaction variant have to be available in all clients.
http://****************/Tutorials/ABAP/TransactionVariant/Create.htm

How to create a cross-client table maintenance dialog?

Hello everybody,
I have a client specific table (mandt is the first key field) that should be maintained cross-client: In the table maintenance dialog, I want to change/create/insert values belonging to clients other than the current logon client. Can I do this with a generated maintenace dialog? If yes, how?
Thank you for your help, regards, Kathrin!

Hi Kathrin,
I think you can't, you must create your own dialog maintenance program.
They are some program to copy data from client to others .. but never seen any dialog cross client. (or remove the mandt in your key).
Regards
Frédéric

Merging SAP Clients - Reporting on Cross Client Table Compare Results

Hey folks,
We are trying to merge two clients into one (on the cheap), i think that cross client table comparision is the best way to find differences and possible issues and clashes with the two systems configuration, but i was wondering if there is anyway to report on these differences, so we can pull them out to word/excel document to anaylse and document them prior to making the changes.
Does anyone know if this possible?
Thanks a lot,
Greg

Hello Mr. Newman,
I think using SCU0 is going to be the way to go but the output is not always the best. However you should be able to show the differences and download to excel to analyse further. If this doens't fit then I think you will have to look at copying the tcode / report and improving the output to meet your needs.
Alternatively post to basis folks and see if they have some better ideas!
Hope this helps,
Cheers,
Dan
Edited by: Danny boy on Mar 31, 2010 3:00 PM

Client export for ABAP programs, repository objects cross client objects

Hello,
Let me first explain the scenario here. Our Development system crashed we are rebuilding the development system from a client export of the production. Client does not want migration etc so the only way we want to do it is through client export.
Now the question is whether cross client objects can really be imported through client export KT, KO, KX requests?
I thought it was possible but after successfully importinng the client export (which was taken using profile SAP_EXPC) of the Production client all the customizing has been imported but non of the ABAP programs have been imported.
Can anyone explain how this is done and if it is possible?
Steps I performed:
1] Exported Production client with profile SAP_EXPC
2] Imported the 3 requests KT, KO, KX using command line
tp import <KT req> <SID> U2 client=<my client> pf=<profile path>
tp import <KX req> <SID> U2 client=<my client> pf=<profile path>
tp import <KO req> <SID> U2 client=<my client> pf=<profile path>
3] After successful import ran scc7 which finished successfully
Thank you

You can transport client independent customizing, read sap note [24853 - CC-INFO: Client copy, functionality|https://service.sap.com/sap/support/notes/24853].
But you cannot transport abap repository objects (abap programs) with a client copy.
Can you explain what you mean by "Our Development system crashed". If you still can happily do client copies to that system, then i really wonder what you mean by crashed...
Cheers Michael

Cross-client Consolidation Statement

Hello friends,
I have a requirement.
I have a situation where two company codes are working in different clients. They are using different chart of accounts also.
I want to make out a strategy for creating a consolidated Financial statement of these two companies. Currently it is being met through a manual process. But I want to do it through the system only without any manual intervention. How can I go about with this requirement. Your valuable responses will be highly appreciated with reward points.
Regards
MK Babu

This has discussed several times.please do a serach in SDN.
Check these threads
The specified item was not found.
Cross-Client
Cross client
cross client
Manoj.

Create source system without cross client config

The SAP-Help URL given below explains the prerequisites for linking BW to a source system. One of the requirements is that the source client is open for cross client configuration.
Is there a way to create the source system without having cross client rights in each source client?
I understand that the client only has to be open while it is being linked to the BW system but I would prefer to avoid opening the client at all.
Help URL:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/frameset.htm

Hi ,
You can perform the following check :-
1) Check if BI DBMS and Source DBMS are same. If not then you have to Install DB Client for that Source then this error should not come.
2)Check if DBSL(Data Base shared Library is installed in BI for this Source. If not Kindly Install that in BI server.
Kindly perform these operations and lets see what happens.
Regards,
Amit Kumar trivedi

Cross-Client (HR Related)

Hi
we are using the ECC 6 with teh following patch level
ABAP / BASIS        11
PI_BASIS            11
SAP_HR              14
SAP_APPL            09
This is Quality system where users are testing the scenario, i have protected the client.
I have complained from the HR users which are listed down:-
1) whenever he executing the SQ03 to create the group, the dialoge box appear that "Changes to repository or cross-client customizng are not permitted"
2) PA30,to change anything in the master - data are requring to make customizing request.
Please provide the solution ASAP.
Regards

Hi
Generally to customizing in carried in Quality server, it is used for testing.
As per my knowledge all the customizings are done in develpement and ask the transport no from basis once we get that save that and send it to Quality. there we test the configured steps wth values and then again get the transport no save that and ask basis to transport to Production.
Yup Any data changes has to be first customised in development and follow the same proses as above and move to production. Any editing everything follows the same stps....
Hope this help u,
reward if helpful,
Asha

Are Workflows Cross-clients

Similar Messages

Maybe you are looking for