Are you giving Vsphere 6.0 a pass?

We're small in terms of vmware infrastructure.Two hosts used out of our three allowed on Essentials.On 5.0 right now.Started looking at upgrade paths when my 5.0 management appliance finally died when the database threw up.Fortunately, in a rare rtfm moment, I did not upgrade the vm's.I was somewhat concerned when I read 'web client' - that rarely ends well.But the client seemed ok - until I saw the console.There are no 'must have' features for us in 6.0 that I am aware of, so I think I'll just install a vsphere 5.5 yank the hosts back to that, upgrade the hosts and vm's, and call it good until a future non sucking vsphere is released, or a compelling feature set presents itself.The only reasons i am upgrading at all are the crap database in 5.0, and the requirement for 5.1 as a minimum to run Kaspersky Light Agents.Given that our...
This topic first appeared in the Spiceworks Community

Similar Messages

Pop Up: The software you are installing for this hardware has not passed Windows Logo testing - AntiVirus

When deploying Endpoint Protection with SCCM 2012, some workstations are getting a popup saying:
The software you are installing for this hardware has not passed Windows Logo
testing and it references "Antivirus". Upon clicking continue anyway it finished installing.
I'm not able to duplicate it on command and not sure why it's happening. Anyone else see this or have ideas on how to troubleshoot?

Without a real screenshot (and maybe even being there), it's hard to say. IME this is not normal behavior and my first thought is that this is actually some malware causing this.
Jason | http://blog.configmgrftw.com
Sorry it took a while, was waiting for it to happen again. Here is an actual screen shot. I'm leaving it until I hear back from you guys. This client actually shows that the endpoint protection deployment state failed with this message:
Description: 0x8004FF03.
InstallUpgradeOrUpdateInProgress=4.1.509.0

So what are you going to do about it?

What are you going to do about these iPad2 shipping problems, Verizon? Your plastered dates of "3-4 weeks" has passed and we are now in week 5+ with nothing to show for. How is this problem going to be rectified? I'm tired of talking to phone reps that have no information because they can't see store systems, and I'm tired of retail stores that hide the screen and blurt off "it's in the warehouse system, but that's all the information we have right now." **bleep**!? You guys got my money over a month ago. Apple has been back to 2-3 week delivery estimate for at least a week now. I would love an answer. Maybe this board will be more successful than actually talking to you guys in person or over the phone. I would love a response, even if it's through private message or email. I've tried your other routes.

On yesterday, I was extremely fed up with waiting as I just hit 4 weeks (ordered March 22nd), I told my CSR (in an email) to cancel my stinking order, demanded my money back, called the 800 number three or four times to gripe and complain and I FINALLY GOT SOMEBODY ON THE PHONE that cared enough to actually do something about it! I'm sure all you have experienced the same thing where the rep on the 800 number is just briefly glancing at the order and then giving the company line.
I pressed yesterday and told the rep I needed someone that would escalate this and give me answers because there was certainly a Black 32 GB/3G with my name on it and that someone just had to push the right d**m button to match it up with me. Well she placed me on hold for 5 or 6 minutes maybe even longer but it was worth the wait. She told me that she did not have access to see anything with my order but that she got a floor supervisor because she too was concerned that my wait had been too long (going on 5 weeks on this Tuesday). The Supervisor did have the magic access and was able to determine that my shipping date is Monday, April 25th and that I'll have it on two days Fedex delivery (April 27th)!! I felt relieved to hear this and so was the CSR and she told me how excited she was to be able to provide me relevant information! On Monday, I should finally have a tracking number and hopefully my package will arrive as promised.
I will gladly return to this forum on Monday evening with an update but I must stress to each of you who were like me languishing on 4 to 5 weeks to make the same call to 877-807-4372 (regional Telesales) number. Give them your location code and they can tell you which region you ordered from if you ordered by phone. I live in Texas and my call was handled by the South region for Telesales and their number is 800-256-4646. Please don't waste your time calling the general Customer Service number (800-922-0204)....you need Telesales and you specifically need your regional team that you ordered from. Press the CSR to check with a supervisor to gain detail shipping information because it is their beyond the grasp of the CSR!!!

The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...

Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Looking for a drum loop app that will run in the background. What are you using?

Looking for a drum loop app that will run in the background. Suggestions? What are you using? I tried Loopseque and I like it, but I can't make it run once I switch apps. Help please.

That's definitely strange, kzmidge. I want a working phone in your hands though. I noticed you mentioned you received the suggestion to complete a reset. Did you already do that? Is it working again? Are you receiving an error message?
If you hesitated a little longer to complete the reset, you can try to place your phone into Safe Mode http://vz.to/rxg0ii and see if you can access mobile sites from your browser. This mode will stop 3rd party applications from running, so you won't be able to use the apps you mentioned but we may be able to narrow down the trouble in Safe Mode. If the mobile sites work, that means the trouble may be in a recently downloaded application and you may be able to avoid the reset my uninstalling some of your more recently installed applications. If it's still giving you trouble, the reset http://vz.to/18wzOCi is the next best step.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

If javascript can no longer be disabled - how do I leave a website that asks the "are you sure you want to leave this site" pop up question without a yes choice

Given that the turn off javascript option will be disabled - how do I close a page that does not allow me to leave by giving a "are you sure you want to leave" pop up question but then redirects to itself where it again asks that question perpetually?
The only way to kill a page like that sofar was to disable javascript and then close the tab.
Now I will have to close the browser - and possibly loose all the tabs I have open.
I want a javascript quick switch - allowing me to easily disable javascript for any page at will.
(esp for some of my older, slower netbooks)
Or at least a "FORCE CLOSE" option for malicious webpages.

Hi ronc2, there isn't a specific setting for this. Firefox's built-in JavaScript settings allow you to control several aspects of scripts*, but unfortunately not this one.
I previously tried to find some other options for individually turning off this event, but I couldn't find a way. Someone might be able to create an add-on to solve this problem, but it will take someone cleverer than I.
Extensions that disable scripts on a site-specific basis:
* If you regularly visit some sites which do this, you can block JavaScript on that specific site using the YesScript extension. Unfortunately, other script-based functionality will be blocked as well.
* YesScript does not preemptively block scripts on every site. If you have to visit a lot of random sites and want to take a paranoid approach of having scripting blocked until you see as much of the site as you can see without running scripts, then the NoScript extension would be for you. But even then it's "all or nothing".
''* These include: JavaScript enabled yes/no, override right-click menu yes/no, change order of windows yes/no, move and resize windows yes/no, close windows yes/no, specific features of pop-up windows, change images yes/no, detect copy/cut/paste and modify selection yes/no.''

Warning when trying to launch application over mapped drive "We can't verify who created this file. Are you sure you want to run this file?"

We have 2 load balanced application servers that map drives with programs on them for users from a central server that are giving the warning "We can't verify who created this file. Are you sure you want to run this file?". Basically how it works
is a user logs in to one or the other application servers (for example, 10.0.0.1 or 10.0.0.2) and runs a log on script that maps an L:\ drive to the users folder on the central storage server (10.0.0.100). When the user goes to launch the .exe from the L:\
drive it presents that warning.
I've looked around and have seen recommendations that you need to add the site to the local intranet zone for IE, but when I try to add L:\ it tells me that I have entered an invalid sequence. It appears that you can only put network shares in that location,
which is not how we're mapping the drive.
Has anyone run in to this before and knows how to resolve it?
Thanks!

Hi,
A mapped drive letter is not supported so please try to input \\server or \\server\folder to see if it will help.
If you have any feedback on our support, please send to [email protected]

What are you JHeadstart developers using in your SuperClasses?

Hi Everyone:
We are very new to JHeadstart/JDeveloper and have just established the method we are going to use at the Entity Level to convert input to Uppercase by putting the following code into a superclass and extending the .xml files of the entities from EntityImpl to this superclass which we called UWCustomEntities.
What I am wondering is what other ways is this functionality being used by you more experienced JHeadstart Developers? I am trying not to re-invent the wheel and utilize methods that have worked well for you.
Of course I can think of toLowerCase, what else are you using?
Thanks so much in advance.
Mary
U of Windsor
Example Code:
package its.sis.BusinessModel.model;
import oracle.jbo.AttributeDef;
import oracle.jbo.server.EntityImpl;
public class UWCustomEntities extends EntityImpl {
public UWCustomEntities() {
// This code converts the inputted string to Uppercase in the database.
// April 27, 2007 mb
protected void setAttributeInternal(int i, Object object) {
Object value = object;
AttributeDef def = getEntityDef().getAttributeDef(i);
if ("true".equalsIgnoreCase((String)def.getProperty("UPPERCASE"))) {
if (value != null && value instanceof String) {
value = ((String)value).toUpperCase();
super.setAttributeInternal(i, value);
}

archassistant is a KDE app, so i won't be using that... im thinking of giving wicd a whirl
True, but im using it in Xfce4 and it works wihtout any problems, and the requirements are not a problems either.
Archassistan requirements
- arch linux distro !
- QT ( qt4)
- netcfg2
So even if it is KDE you dont need a whole bunch of kde dependencies

Can you tell me what is a pass code for re setting program and where can I find it?

Can you tell me what is a pass code for re setting program and where can I find it?

For resetting what program? What are you trying to do? When you have a problem, please provide enough info to answer.
 Cheers, Tom

Are you using the MathScript Node in LabVIEW or the MathScript Interactive Window?

Are you using the MathScript Node in LabVIEW or the MathScript Interactive Window? I am very excited with the MathScript Node inside LabVIEW. However, I would like to see what other people think.
Avalim

Avalim,
Personally, I am determining that I like to use the MathScript Node in LabVIEW. It makes it easier for me to pass my data in and out of the LabVIEW environment!! But, like you, I am excited to see what any other users think!!
-Jeff P
Jeffrey P.
LabVIEW Product Management
National Instruments

Iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted? Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted? Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

Hi Ken,
Thanks for the reply. The project I am working on is a test project for a customer. They could potentially want a number of their educational subjects presented as an interactive text book. The intent of this first project with them is to establish a logical workflow that will allow us to efficiently estimate costs and allow for review throughout the design process. Having worked with customers on creative projects in the past I can anticipate that they will want a number of changes made once they see a working version of the interactive text book.
It is a grim reality that no project can be fully edited and planned prior to working on it and I know revisions and changes are always made once the customer can see their product. It is ok with me if there is no easy way to pass the text back and forth from the customer and me without having to reformat everything but I just want to know that is the way it works in order to provide a realistic time estimate for the project.
My hope was I would be able to export the formatted text, allow them to make edits and then reimport that formatted text. The style sheets I am using are from one of the iBooks Author templates.
Do you know if there is a way to use (or export ) this style sheet so it can be used in a Pages Document?
Or, would the best option be to have the customer install iBooks Author? This would require the customer to have a mac and the software so it doesn't work for all cases.
Another idea I was considering would be to export the book as a PDF and have the customer add markup and notes to the PDF.
All of these options do not seem too great to me.
I am open to any ideas.
Thanks,
Rob

Inventory reports are not giving output while executing in rsrt

Hi,
I am running inventory reports in RSRT. But for every report when i run, a debugger comes and its not showing any output. And the break-point in it is a standard one. so atleast standard reports must execute, but they are not giving me any output.
Please tell me what can i do to resolve the error.
Roma

Hi Roma,
Just press F8 key and keep executing report .
Usually Bex Show this when either there is some problem with Report or Some variables you have used in query or you have not sufficient memory .
Run the report and you will definately get some ides.
key F6 to go to next line of execution
key F8 to go to next breakpoint .
Regards,
Jaya Tiwari

The developers at Mozilla are not giving me what I want

The developers at Mozilla are not giving me what I want. What I want is a program that doesn't slow down and then crash when I have too many windows open, which is what both 3.5 and 4.0 have done. Instead, I am getting new features that I don't want, like my tabs on top (an illogical place to put them) and a big orange button which forces me to make an extra click when I want to open a menu.
The last stable version of Firefox was version 2. When I bought a new computer and got Windows Vista, version 3.5 wouldn't even open. When I upgraded to Windows 7, version 3.5 would open, but it slowed down and crashed constantly if I had too many windows open. Version 4 is doing the same thing, but this version freezes repeatedly before it crashes, giving me the message "(Not Responding)".
So what do I do? Well, I go on the Mozilla site to send them a message, and I am confronted with condescending smiley and frown faces and a message box that is limited to 140 characters. So then I tried to find the forums, only to find no link at all to the forums. So not only doesn't the program work, but I am not allowed to send detailed feedback.
What was once a good product is now a piece of junk, and the people who are developing it don't seem to care that it doesn't work, and they treat their users with nothing but contempt.

Right-click in the empty space near the orange button and deselect "Tabs on Top" to get the tabs back to where they used to be.
For the orange button, apparently this addon will get rid of it: https://addons.mozilla.org/en-US/firefox/addon/app-button-remove/
I haven't tried the above addon because I happen to like the new button. (I also had the TinyMenu addon installed on previous versions.)
I had a ton of problems with random crashes in 3.6, but in my experience 4 is worlds better. I've been using it for about a month and only had two crashes, while 3.6 was crashing almost every day. What addons do you have installed? It could be that your crashes and freezes are being caused by one of the addons.
I know what you mean about Firefox developers, though. I have been increasingly disillusioned with their tendency to label bugs as new features, and if 4 hadn't been such an improvement for me, I probably would've switched to Chrome.

Unable to delete an album. This message appears "are you sure you want to delete the album"

When deleting an album on iphoto I must have hit the wrong key and I got the following message:
Are you sure you want to delete the album “/Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0920.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/21/20130321-224355/M4H00026.MP4 /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0929.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0930.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0932.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0935.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0936.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0937.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/2013/03/18/20130318-131925/IMG_0938.MOV /Users/isabelcorrea/Pictures/iPhoto Library.photolibrary/Masters/
And It is not giving any option to click anywhere. I can't close or quit iphoto. PLEASE HELP!!

That does not look like an iPhoto command, much more like a Finder one.
Use the Force Quit command. It's under the Apple Menu.

"are you still there" Prompt

Hello,
could you please tell me how to delete the system prompt "are you still there" in UCCX 8.5. (linux)
Thnaks

I fixed this issue via one of two simple solutions, the first is only by setting the max retry in the menu properties to 0 and I repeated the recorded message itself 2 or 3 times in the prompt to be played.
The second solution is to set the max retry in the menu properties to 0 and place a counter step to count against how many times the menus step reached the time out or unsuccessful branches then pass to the next step or repeats the menu by a go to step based on a comparison with a Max Retry integer which you set, and this solution is better than the first one as no need to repeat the message itself in the recordings and also because it also remove the system prompt " you have entered an invalided option "
Sent from Cisco Technical Support iPhone App

Are you giving Vsphere 6.0 a pass?

Similar Messages

Maybe you are looking for