Are you having issues with Rezound synching to Google?

Is anyone else having trouble getting their Rezound to synch to Google? I have done numerous soft boots, been on the line with T1 & T2 without substantive help. In other words, I have done everything but a factory reset.

Have you gone to menu>settings>accounts & sync to make sure your background data is turned on?  Sometimes, if the phone goes into power saver mode (due to low battery), it doesn't turn back on.

Similar Messages

  • Are you having problems with the Lacie external drive after upgrading to the new operating system

    Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

    See here for everyone discussing the issue you are having:
    https://discussions.apple.com/thread/5475136?tstart=0

  • Are you having problems with Windows XP Pro and Airport Utility Updates?

    I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

    Well... it worked! :D
    I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
    DryHeat, yeah it was with SP2 but I got it installed now so no worries
    Thanks a lot!

  • SOLUTION: Are you having problems with using HDV, FCP X and iDVD?

    If you edit HDV (TAPE) in FCP X and want to burn the video in iDVD you will find the following problem  .  .  .  iDVD squashes the image as shown in the screenshot below.
    Whether you export as ProRes or H.264, iDVD will see it like this as a squashed image.
    This is because iDVD does not recognise HDV anamorphic images unless they are in the Apple Intermediate Codec.
    There are 2 solutions to this problem:-
    1. Create a ProRes 422 Custom Compressor Preset with a frame size of 1920 x 1080.
    The only downside to this is that the conversion process in my 2008 iMac takes about 5 times realtime.
    2. Create an Apple Intermediate Codec preset for HDV.  This encodes on my iMac in around realtime, so it is at least 4 times faster than the ProRes solution.
    Unfortunately, if you have Compressor 4 you cannot create Apple Intermediate Codec presets, but Compressor 3.5 will and what is more important, that preset can be installed in Compressor 4.
    So you can export your HDV project from FCP X using Compressor Presets in either ProRes or AIC and use the resulting file in iDVD to get a correctly proportioned image like this.
    I prefer to use the AIC preset as it is 4 times faster and there is no quality difference on the final DVD.
    What do you do if you haven't got Compressor?
    Well you can email me for a 12KB copy of the preset as I believe FCP X can use it even though you don't have Compressor.

    Ian,
    Thanks for the tip!

  • Are others having issues with downloading purchased TV programs after updating to IOS 7.1.2?

    I have tried to download 3 purchased tv series this morning.  They each get to about 1 minute remaining and then start over again.  I recently updated to IOS 7.1.2 on my iPad.  Is this the reason I'm having this issue?

    these two images may help clarify the issue..
    This image shows my email accounts added on my phone in settings
    http://i199.photobucket.com/albums/aa243/toffeecreme/image1_zpsc16e1069.png
    This image shows email accounts visible in the mailbox (Live account is visible, however this one usually disappears too)
    http://i199.photobucket.com/albums/aa243/toffeecreme/image_zps1a92804a.png

  • Are you having trouble with Security Questions?

    I am and cant download anything because it wont save!!!!!!!!!!

    Can you be more specific with your problem?

  • Are you having trouble with Dictation Enhanced? See below for a fix.

    HenryMore
    If Dictation Enhanced software does not seem to be onboard disconnect ethernet. Then go somewhere to dictate. If the software is installed you will be able to Dictate without being hooked up on the web. You have the software already. Maybe it downloaded when you installed Mavericks. If you did not have the enhanced dictation software you would not be able to dictate.
    Enhanced D ictation, OS X Mavericks (10.9)  
    I have this question too (0) 
    Reply
    Categories: Using OS X Mavericks

    Hi Ned,
    I "own" CS and subscribe to CC photography bundle on acrobat pro.  The problem is that the website puts me into an infinite loop with no hope of getting the "deal" for CS "owners ".
    Btw, this new subscription model is great for Adobe, but probably not so much for the largest part of their demographic which I suspect is individual people. Corporations of course buy things, pay premium prices and that revenue may be greater than individual sales. However, the popular adaptation of a product (by people like me) can greatly influence what happens at corporations.
    FYI, I'm in charge of marketing a specific product line  for a very high tech multinational, have seen this movie and the ending isn't pretty. Interesting, but not pretty.
    Than you.
    Best,
    Mark
    ~~~~~~~~~~~~~~~~~~~~~~

  • Are you having trouble with text in InDesign CC?

    My text keeps disappearing when I'm working on a document. To return it, I have to resize the frame or recolour it black. Is it a glitch?

    Hi Saucott,
    Please double check if frame is becoming overset text.
    If this is not the case then please post a screenshot.
    Looking forward to your reply.
    Regards,
    Sumit Singh

  • IF YOU ARE HAVING ISSUES WITH THE DROID TURBO BEING SLOW

    IF YOU ARE HAVING ISSUES WITH THE DROID TURBO BEING SLOW ON WIFI JUST TURN OFF GLOBAL MODE!! DONT ASK ME WHY THIS WORKS BUT IT DOES.  I TOOK MY FIRST PHONE BACK TO THE STORE BECAUSE I THOUGHT IT WAS DEFECTIVE BUT THEN MY REPLACEMENT DID THE SAME THING.  GLOBAL MODE IS WHAT THE PHONE IS SET TO USE OUT OF THE BOX.  I SWITCHED IT TO LTE/CDMA AND NOW IT WORKS FLAWLESSLY.  AWESOME

    I'm glad you had luck with this.  I have the same issue, and i've replaced the droid turbo 4 times.  I've tried it on 4 or 5 different wifi networks and it doesn't give me any type of speed at all. 

  • Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

    Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

    Hi, just got off the phone from BT Business. It is the Business 2wire hub that has the issue. The girl from technical talked through a direct modem to Mac connection and my download took 20 minutes. If you are on Fibre broadband this is the only current fix or a new router if non fibre customer. Hope that helps.

  • Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second

    ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc.  I cannot swipe to the second page of icons,  black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

    I had this problem as well.  This is what I found by searching online.  I tried the fix on my nano 7th gen and it worked.  I hope this helps you.  Make sure to use two fingers for sliding and double-click the icons to get into settings.  Good luck.
    It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
    iPod nano (6th generation and later): How to use VoiceOver
    http://support.apple.com/kb/HT4317
    To turn off VoiceOver on iPod nano using VoiceOver gestures
    From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
    If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
    Slide one finger around the screen until you hear Settings. 
    Double-tap to open Settings. 
    Slide your finger up or down the screen until you see or hear General, then double- tap. 
    Slide your finger up or down the screen until you see or hear Accessibility, then double-tap. 
    Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap. 
    Double-tap when you hear "VoiceOver switch button on." 
    You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
    Note: You can also turn off VoiceOver by resetting your iPod.

  • Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

    Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

    There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not be apply in your case.
    1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
    2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
    3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
    4. Reset the System Management Controller.
    5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
    6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
    7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
    8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to  behave erratically. If you're using such an adapter, disconnect it and test.
    9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
    10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
    11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

  • Verizon iPhone 5, 64GB black - is anyone having issues with a very choppy conversation while talking on the phone.  Both my wife and I have the same phones and are both having the same issue.  We can only hear every other word.

    Verizon iPhone 5, 64GB black - is anyone having issues with a very choppy conversation while talking on the phone?  Both my wife and I have the same phones and are both having the same issue.  We can only hear every other word of the person we are talking to.  This happens at home, on the road and in the downtown area while calling both cellphones and landlines. It is intermittent, so we don't know exactly when it will reoccur.  Absolutely no problem with data.  The data speed is great.

    "Wireless devices use radio transmissions, so unfortunately you can't get Service if your device isn't in range of a transmission signal. And please be aware that even within your Coverage Area, many things can affect the availability and quality of your Service, including network capacity, your device, terrain, buildings, foliage and weather."
    Customer Agreement | Verizon Wireless
    While there may be an issue in your area, it is suggested that you don't use wireless service if it's a life or death situation, such as the one you've described.

  • We are having issues with WLS 5.1   pdf   SSL

    We are running IE 5.0 and above browser with our application and the server is Weblogic 5.1 We are having issues with a generated pdf being sent down from the server using the response outputStream in an SSL connection. We tried setting the content type before getting the outputstream. IE comes back with a dialog for download. When we select either of the options IE comes back with "Unable to download <url> from <server>. We are using WLS 5.1 service pack 6. Any help will be greatly appreciated
              

              I tried this option, but did not help. We have two weblogic servers on different
              machines. One works fine in downloading pdf file over https, but not the other.
              The error we are getting after selecting it to save it to a file:
              IE cannot download xx.pdf from www.xxx.com
              From the link, when we say "save target as", we get different error as:
              This file could not be written to cache.
              Someone suggested to pass "pragma: public" or "pragama: no-cache" in the header.
              But we are just simply serving it as a file, neither from servlet nor from jsp.
              So I suspect it something to do with our weblogic proxy or security configuration.
              Any ideas/help is much appreciated.
              Thanks
              Jayashree Raghavan <[email protected]> wrote:
              >If you ever have a similar problem it might help to check in browser
              >settings.
              >In IE goto tools/internet options/
              >Goto advanced Tab
              >go down to Security.
              >Uncheck the "donot save encrypted pages to disk".
              >This will make downloading a pdf work in ssl.
              >
              >
              >Jayashree Raghavan wrote:
              >
              >> We resolved this problem thanks to Maxim, by commenting out the code
              >that sends to the browser not to cache these pdf files. response.setHeader("Pragma",
              >"no-cache");
              >
              

  • MPS 200 with J 4.6. We are having issues with encryption and unable to install latest, J 4.7.2

    We have an MPS 200 with J 4.6. We are having issues with encryption and the tech assigned to our TAC case informed us that version J 4.7.2 would resolve the issue per release notes (confirmed). Unfortunately we have been unable to install latest, J 4.7.2. Every time we select the 4000j472.tar.gz file, the MPS displays software upgrade failed. We have used IE 8, 9 and 11 and have opened them up as much as possible, still no joy. We have unzipped the file, but do not know which file to select for the install.
    Would appreciate any assist.

    As the others have suggested - download the file again - and check that the MD5 Checksum (with something like WinMD5) of what you have downloaded matches what it should be (for J4.7.2 is b328946e6ca24f181c937d90d8e5cc12).  Then upload the .tar.gz file as downloaded (wihtout extracting it).
    Wayne
    Please remember to rate responses and to mark your question as answered if appropriate.

Maybe you are looking for

  • Can not connect from Forms6i to PO8i.

    Hi, My PC is a NT named 'oracle'. I have first installed Forms6i in DEFAULT_HOME, c:/orant. PO8i is installed as: Oracle Home: ora8i Full Path: c:\orant\ora8i Choose Typical Install Global Database Name: ora8i.oracle.master.com.au SID: ora8i Then I a

  • Multiple repeating SubForms binding to the same data node

    Having multiple repeating SubForms binding to the same data node : In our documents, many times we need to display information from same table in multiple locations. For example, if document displays information of Insureds on one page and informatio

  • How to determine the transaction type?

    Hello, I have a requirement to disable the user when the role string field on the usr form is empty. I set up a post update entity adapter to do that and it works fine. When I want to enable the user using the Enable button, the above post update ent

  • NiScope for linux 2.6

    Does niScope application software work for linux 2.6? I currently have it running on Red Hat Enterprise 3, but that's the 2.4 kernel and this is a rather outdated kernel version.

  • I split my clip in three ways, then deleted the middle clip

    I have a question. I split my clip in three ways, then deleted the middle clip, what I do to join these three clips again ? I need some help. Is It only work with the Precision Editor? because i think it s so difficult!