Are you having problems downgrading from 5.1 crapware (1602.error in Itunes)?

Hi!
Like many ppl, I´m experiencing major problems with the last (and less successful) upgrade to ATV(2). Tried downgrading but keep getting 1602-error in Itunes.
Found this useful youtube-clip, http://www.youtube.com/watch?v=I7UCAH_Fczc
In short terms, helps you putting the ATV in DFU-mode and overrides the 1602-error.
Helped me and is now up running as before, with 5.02-firmware. And everything works like a charm. Apple is still signing earlier firmware due to fu*kup with the last one.

too bad i expect that when i pay $300 + dollars for something that i assume it will work correctly... without me having to go through so much trouble to fix a problem that shouldnt exist to begin with.

Similar Messages

  • Are you having problems with the Lacie external drive after upgrading to the new operating system

    Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

    See here for everyone discussing the issue you are having:
    https://discussions.apple.com/thread/5475136?tstart=0

  • Are you having problems with Windows XP Pro and Airport Utility Updates?

    I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

    Well... it worked! :D
    I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
    DryHeat, yeah it was with SP2 but I got it installed now so no worries
    Thanks a lot!

  • SOLUTION: Are you having problems using HDV in FCP X and iDVD?

    If you edit HDV (TAPE) in FCP X and want to burn the video in iDVD you will find the following problem  .  .  .  iDVD squashes the image as shown in the screenshot below.
    Whether you export as ProRes or H.264, iDVD will see it like this as a squashed image.
    This is because iDVD does not recognise HDV anamorphic images unless they are in the Apple Intermediate Codec.
    There are 2 solutions to this problem:-
    1. Create a ProRes 422 Custom Compressor Preset with a frame size of 1920 x 1080.
    The only downside to this is that the conversion process in my 2008 iMac takes about 5 times realtime.
    2. Create an Apple Intermediate Codec preset for HDV.  This encodes on my iMac in around realtime, so it is at least 4 times faster than the ProRes solution.
    Unfortunately, if you have Compressor 4 you cannot create Apple Intermediate Codec presets, but Compressor 3.5 will and what is more important, that preset can be installed in Compressor 4.
    So you can export your HDV project from FCP X using Compressor Presets in either ProRes or AIC and use the resulting file in iDVD to get a correctly proportioned image like this.
    I prefer to use the AIC preset as it is 4 times faster and there is no quality difference on the final DVD.
    What do you do if you haven't got Compressor 3.5 or 4?
    Well you can email me for a 12KB copy of the preset as I believe FCP X can use it even though you don't have Compressor.

    Ian,
    Thanks for the tip!

  • SOLUTION: Are you having problems with using HDV, FCP X and iDVD?

    If you edit HDV (TAPE) in FCP X and want to burn the video in iDVD you will find the following problem  .  .  .  iDVD squashes the image as shown in the screenshot below.
    Whether you export as ProRes or H.264, iDVD will see it like this as a squashed image.
    This is because iDVD does not recognise HDV anamorphic images unless they are in the Apple Intermediate Codec.
    There are 2 solutions to this problem:-
    1. Create a ProRes 422 Custom Compressor Preset with a frame size of 1920 x 1080.
    The only downside to this is that the conversion process in my 2008 iMac takes about 5 times realtime.
    2. Create an Apple Intermediate Codec preset for HDV.  This encodes on my iMac in around realtime, so it is at least 4 times faster than the ProRes solution.
    Unfortunately, if you have Compressor 4 you cannot create Apple Intermediate Codec presets, but Compressor 3.5 will and what is more important, that preset can be installed in Compressor 4.
    So you can export your HDV project from FCP X using Compressor Presets in either ProRes or AIC and use the resulting file in iDVD to get a correctly proportioned image like this.
    I prefer to use the AIC preset as it is 4 times faster and there is no quality difference on the final DVD.
    What do you do if you haven't got Compressor?
    Well you can email me for a 12KB copy of the preset as I believe FCP X can use it even though you don't have Compressor.

    Ian,
    Thanks for the tip!

  • Are you having problems syncing with Pocketmac, Missing Sync or Media Sync? Here's what I did...

    Just throwing this out there as a solution that worked for my situation. It may not work for everyone's needs.
    After NUMEROUS emails back and forth with Pocketmac support I was finally told that Pocketmac will not work if Media Sync is also installed. It causes the "Error 1 Skipping" problem due to a USB driver conflict. So I tried Missing Sync's free trial. No good. It would not sync either, so paying money for the non trial version wasn't going to happen.
    So, I ended up keeping Media Sync to keep my iTunes library synced and I started to use a wonderful little free app called "Google Sync". It works beautifully for my needs. It runs in the background (with no negative effect to the BB's performance or battery life) and automatically syncs your gmail contacts and google calendar to your BB device. If you change something on either the BB itself or online, google sync catches it and updates the other accordingly. 
    So if your sick and tired of messing around with Pocketmac and Missing Sync, give Google Sync a try. I love it! 

    it was only burning at 4x even though 47x was requested.
    That's a issue discussed in the past.
    It turns out that 8X DVD burning means about 47X CD burning - you were requesting 8X DVD but only got 4X DVD burning.
    I haven't seen it discussed anymore so maybe Apple got around to eliminating that 'quirk' in terminology.
    I suspect some of the early 8x DVD burners didn't perform as advertised. I'm glad your new 16X burner is working for you.

  • TS1702 help, are you having the same problem? iPad 2 calendar, can't get the month of March, can get days in March, but not month view. Any suggestions, thank u.

    help, are you having the same problem? iPad 2 calendar, can't get the month of March, can get days in March, but not month view. Any suggestions, thank u.

    Hi melbernai - not sure if you've solved this problem yet. I had the exact same problem recently with my 2nd Gen iPod Nano. I solved it yesterday by simply updating iTunes to the most recent version, after which I could get rid of the register screen. The only other thing I needed to do to add my custom playlists was select "Manually manage music" on the screen for my iPod, since it had been in an automatic synching mode since the problem occurred.

  • I'm having problems upgrading from 10.6.8 to Yosemite.  My computer locks up after the download and installation process.  Does anyone know how I can overcome this problem?

    I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    Hi,
    Apple's AirPrint only support specific models while using wired or wireless network connection.
    Plugging a printer into a USB port of Apple base is not supported for AirPrint:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
    http://support.apple.com/kb/ht4356
    There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
    http://www.ecamm.com/mac/printopia/

  • How to change "are you still there" vioce from auto attemdent

    Hi All,
    we have exchange 2010  with lync 2010 .
    we want to change "are you still there" message from exchange UM Auto Attendent 
    Manish Yadav

    Navigate to \Program Files\Microsoft\Exchange Server\V14\UnifiedMessaging\prompts\en  (for English) on each UM server and find the file tuiAreYouThere.1.wav.  Replace that file with a blank wave file of the same format.  You may also be able
    to simply remove the file.  Keep track of these as they may come back some day with a patch or repair.  Keep in mind this is not supported, so a bit of caution there, but in the end you're just swapping WAV files.

  • Can you purchase an app from the mac app store with an itunes gift card

    Can you purchase an app from the mac app store with an itunes gift card and if so how.

    Yes.
    Click Redeem on the right side of the MAS window under Quick Links.
    Carolyn   

  • Are you having iTunes video playback problems?

    Do you have iTunes Store-bought videos whose playback is terrible, all choppy and full of freezes while playing back in iTunes?
    Have you copied one of those iTunes videos to a thumb drive and had it play back perfectly?
    This problem is not fixed by any of the Quicktime adjustments that Apple suggests on their "how to fix video playback issues" page, and, aside from this video playback issue, iTunes is working fine on my machine. As I said, the videos work fine, too, if played from a thumb drive instead of the hard drive.
    This has been going on for weeks, and people have been posting about it here on the forum, but, to my knowledge, there's no fix. Just silence.
    It might be useful if people who are seeing this problem post some information about their systems. For all I know, all of us who are seeing this problem have one particular vendor's computer.
    The computer I am having this problem with is a new HP laptop that came with Vista. This one:
    http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c00846935&cc=us&dlc=e n&lc=en&jumpid=regR1002USEN
    1.6 GHz AMD Turion ™ 64 X2 Dual-Core Mobile Technology TL-52
    2 X 512KB L2 Cache
    2048MB DDR2 System Memory (2 Dimm)
    NVIDIA GeForce Go 6150 (UMA)
    120GB 5400RPM (SATA)
    I think the problem has to do with SATA, but I don't really know, except that my computer has it and I am able to play these videos perfectly from a thumb drive but not the SATA hard drive.
    If you are having this problem, please consider posting your computer's info. Thanks.
    HP Pavilion Entertainment PC   Other OS   Vista

    OK, I figured it out... I too have a dv6000 with Vista and I have been trying to fix this terrible itunes video playback thing and this is what I found. For whatever reason the NVidia driver in the dv series doesn't play nice with Vista. They say that they are looking into it but have no response other than that. Somehow the data from the hard drive isn't fast enough. So, reading this I figured that if that REALLY is the problem that I could use a external drive and have the videos come from there, and Voila!! It works like a charm, no skipping, no stalling, no more blue screens. I hope this is helpful, I know what a pain this can be.
    ALSO, apparently some think that you can't watch itunes video while using Vista's "ReadyBoost". I haven't had that issue personally, but I have seen a lot that have who disabled it and had it work fine.
    Let me know if this works for everyone else.
    Later
    S

  • I am having problems importing from a DVD or a CD to my Ipod nano via windows 8.  I initially set everything up on a computer with windows 7, and authorized the windows 8 computer as well.  Howevre, the oly thing that comes up on windows 8 is my purchases

    I am having problems importing to my Ipod nano via windows 8.  I usually do this from a windows 7 computer and have had no problems; hoever in windows 8 I can only see items purchased in the Itunes store.  I do not have access to my entire library, which includes song uploaded from CDs and some videos.  As a result, I'm having problems uploading any new items from CDs or DVDs.  The computer with windows 8 is an authorized computer, so I don't understand why I'm having the problem.

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Are you having trouble Saving a copy of a pdf document in Adobe X? Well here is the solution!!!!

    Use another Web browser! There are confirmed problems with IE8 and Firefox. Opera works just fine, and I am assuming since Google is 'tea-bagging' just about everyone (or everyone is 'tea-bagging' Google, I'm not really sure) that it probably works in Chrome. There! Problem solved! Adobe sucks!

    You can create a script that will lock the fields before signing. But when you edit the document after the student signs, the signature will no longer be valid and the document will show that it has been changed after signing. Adobe restricts the number of files you can collect information on with forms that can be saved and emailed. The restriction used to be 500 files unless you purchased the appropriate LiveCycle product to enable the pdf files for saving.
    Why in the world are you requiring potential students to sign forms. Many students will not know how to sign pdf files. Just have a button that will submit the information to a website for you to extract or to send you the information in an FDF file and import the information form. You can have a button that will lock the fields they fill out. This will ensure you do not have to worry about the 500 file limit.
    Understanding reader extensions licensing | Adobe LiveCycle Blog

  • Having problem updating from the apple appliction icon.

    I am having problem with updating my phone from the apple application icon.  I have three updates but it will not allow me to update the information because it say that "Your Apple ID has been disabled.

    Follow the link that came with the 'Your Apple ID has been disabled" if
    there was one or try here:
    Apple ID: "This Apple ID has been disabled for security reasons" alert appears
    http://support.apple.com/kb/ts2446

Maybe you are looking for