Are you having problems with Windows XP Pro and Airport Utility Updates?

I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

Well... it worked! :D
I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
DryHeat, yeah it was with SP2 but I got it installed now so no worries
Thanks a lot!

Similar Messages

Are you having problems with the Lacie external drive after upgrading to the new operating system

Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

Do you have Parallels installed by any chance? There is a known problem that causes symptoms similar to this. You do not need to actually be running Parallels at the time and nothing in ActivityMonitor would point to Parallels. An update corrects the problem:
http://kb.parallels.com/111541

SOLUTION: Are you having problems with using HDV, FCP X and iDVD?

If you edit HDV (TAPE) in FCP X and want to burn the video in iDVD you will find the following problem . . . iDVD squashes the image as shown in the screenshot below.
Whether you export as ProRes or H.264, iDVD will see it like this as a squashed image.
This is because iDVD does not recognise HDV anamorphic images unless they are in the Apple Intermediate Codec.
There are 2 solutions to this problem:-
1. Create a ProRes 422 Custom Compressor Preset with a frame size of 1920 x 1080.
The only downside to this is that the conversion process in my 2008 iMac takes about 5 times realtime.
2. Create an Apple Intermediate Codec preset for HDV. This encodes on my iMac in around realtime, so it is at least 4 times faster than the ProRes solution.
Unfortunately, if you have Compressor 4 you cannot create Apple Intermediate Codec presets, but Compressor 3.5 will and what is more important, that preset can be installed in Compressor 4.
So you can export your HDV project from FCP X using Compressor Presets in either ProRes or AIC and use the resulting file in iDVD to get a correctly proportioned image like this.
I prefer to use the AIC preset as it is 4 times faster and there is no quality difference on the final DVD.
What do you do if you haven't got Compressor?
Well you can email me for a 12KB copy of the preset as I believe FCP X can use it even though you don't have Compressor.

Ian,
Thanks for the tip!

Having problems with Logitech Vision Pro and AIM and I chat

Can't believe it can be this hard I'm trying to install a Logitech Vension Pro web cam and make with work with AIM via Ichat. I've got the camera to work in some applications so it does work. After many hours on line I decided that I needed to down load the new version of Ichat. But when I tried to install this I get the following error message: Cannot install Ichat Update on this volume. This volume does not meet the requirements for this update. Can some please give me an idea of what I need to do????
Thanks
Myrnarafa

Glen,
Thanks for the reply. The problem is that the Logitech Web Cam will not work in the AIMs program. I have it linked to the Ichat program but when I try to do a video chat there is nothing in the bottom of the chat window about video or audi. On my Windows PC, when you initate a chat window with someone you see on the bottom of the chat window a link to start a vidoe chat or an audio chat.
But there is nothing there on the MAC/AIM/Ichat window. I can type text and that works fine. The camera seems to work in other application and Microphone seems to work if you look in System Preferances/Sounds. The WebCam does not show up by name in the AboutThisMac/MoreInfo/USB but it does work in someother applications. So the problem is getting it to work in IChat and AIMS. Any suggestions would be greatly appreacated.
MyrnaRafa

Having problem with "windows on top" in jre 6 update 12

I'm having issue with the jre 6 update 12 with our Swing application. It works fine with update 11. The issue is that my JFrame is somehow getting set to be "always on top" once I've opened an closed a modal dialog from that JFrame. Here is the steps:
1) Open a JFrame (note the "alwaysOnTop" is not set to true).
2) Click on a button which will open a modal dialog.
3) While the dialog is open click on the underlying JFrame (nothing happens as modal dialog is blocking it).
4) Now close the dialog and suddenly the parent JFrame is now set to be always on top. This won't happen if I didn't click on the parent JFrame while the dialog was open.
Has anyone else encountered this issue with jre 6 update 12? I'm really puzzled as to why this is happening. There is nothing in the release note to suggest there has been any change in this area in this release. Any help would be much appreciated?

This is a duplicate of http://forum.java.sun.com/thread.jspa?threadID=5199159, which is (more appropriately) posted in the Web Start forum. Post any replies there.
Please do not duplicate your posts.

I am having problems with my hotmail email and new software update. It keeps asking me for my password even though the email account has been verified. Please help

It keeps asking me to re- enter the password. Is there something that I am doing wrong, the account has been verified but as soon as I exit out of settings it will ask me to re-enter my password.

I have done this and keeps saying the same thing. I have even tried setting my account through Microsoft exchange but no luck

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

I have been having problems with my iPod touch and my WRT...

I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
Message Edited by AlliW on 10-02-2008 02:06 PM

I had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
1. Settings - wifi - linksys
2. Erase your DNS settings & input same numbers as in router
Settings.
3. Http proxy should be
in off position.
4. Close out & open safari you should now have a wireless
connection.

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I'm Having problems with the video freezing and the sound carrying on since I up graded my iPad to ios8 BBC IPLAYER

I Am having problems with the video freezing and the sound carrying on whilst watching BBC IPLAYER ITV PLAYER until I reboot video and the problem acures again

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

I'm having problems with CS2 (mainly illustrator and photoshop

I'm having problems with CS2 (mainly illustrator and photoshop ) randomly shutting down while trying to save a file. Reformatted my laptop for fear of a virus and reloaded... I have gotten nowhere.
Please Help!

CS3 still had issues with the preferences becoming corrupt, so a possible workaround would be to reset the preferences.
The file is called AIPrefs and is located under 'Documents and Settings/User/Application Data/Adobe/Adobe Illustrator CS3 Settings'. It is a hidden file. Delete it with Illustrator closed and when you launch the program again the file will be rebuilt.
May be it is also sounds like you need more memory for your computer. If you can navigate to your computer's memory controls, and allow your operating system to use a portion of your hard disk drive (HDD) as RAM (maybe 2Gb or so) it may solve your issue.
How is about: http://www.filerepairforum.com/forum/adobe/adobe-aa/illustrator/383-%E2%80%8Bcorrupted-fon ts-in-illustrator-file-urgent-help-need – resource has non-commercial specialty
Third party software Illustrator Repair Kit also must be good solution
It has free demo version at:- http://www.illustrator.repair/
Hope this will be helpful.

Is anyone using NETGEAR Push2TV with a MacBook Pro and AirPort Extreme and does it work well for you?

I am interested in buying a NETGEAR Push2TV display TV streamer to use with my MacBook Pro and AirPort Extreme.
I saw on the Netgear site that a Intel Wireless Display/WIFI driver software is required for PC's; do we have this software installed already on our MacBook Pro's? Is any one using this box and does it work well for you, any problems or setup issues?

trying to find out same thing , store said works with new intel processor, My mini dont finding.....

I have been having problems with my speaker. After the recent update I am unable to listen to movies or music using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears.

I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!

Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.

I'm having problems with Adobe Illustrator , Photoshop and MediaEncoder !

I'm having problems with Adobe Illustrator , Photoshop and MediaEncoder !
The ilustrator when opening files from a lack of memory of which I own already find it hard 11Gbram , Photoshop crashes inesperdamente and the Media Encoder is not converting the video in nnehuma the options requested .
Would like guidance , never had such problems with Adobe software . Today got a MacPro 2x2,2.66 Ghz Dual Core Intel Xeon 11Gbram 240GB SSD .

Hi Mw,
Will it be possible for you to join the connect session: https://my.adobeconnect.com/rbhunwal
I want to have a look into this.
Thanks & Regards,
Raghuveer

Are you having problems with Windows XP Pro and Airport Utility Updates?

Similar Messages

Maybe you are looking for