Are You Looking For A Car Cradle? Here You Go!
I just got my FlexPed from a company called Thought Out & its pretty sweet so far. It fits the 30GB iPod very well indeed. As of now, this is the only car cradle I know of that can be used with the new iPod. I was going crazy without my new iPod in my car, but no more. Now I can watch videos while I drive! Take a look at my setup in my Scion xB:
http://img.photobucket.com/albums/v334/peestandingup/IMG_1208.jpg
http://img.photobucket.com/albums/v334/peestandingup/IMG_1213.jpg
http://img.photobucket.com/albums/v334/peestandingup/IMG_1215.jpg
http://img.photobucket.com/albums/v334/peestandingup/IMG_1217.jpg
http://img.photobucket.com/albums/v334/peestandingup/IMG_1223.jpg
http://img.photobucket.com/albums/v334/peestandingup/IMG_1224.jpg
Here is the companies site:
http://thoughtout.biz/FlexPed.htm
There is a little vibration, but only on rough roads. Plus, I drive a Scion xB and they do have a "stiffer" ride than most cars out there.
Similar Messages
-
Are you looking for an Internet Marketing Company?
Hi,
Are you looking for an Internet Marketing Company?
Here is the place you can find our large network provides all
IT services and BPO Services. We are very well expertise in Search
Engine Marketing and Search Engine Optimization.
Visit our website at www.desss.com and contact us at any time
through mail. We are ready to help you at any of the moment.
Thanks,
DESSS Inc.This is not the place for such spam.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"desssseo" <[email protected]> wrote in
message
news:fqqonf$77$[email protected]..
> Hi,
>
> Are you looking for an Internet Marketing Company?
>
> Here is the place you can find our large network
provides all IT services
> and
> BPO Services. We are very well expertise in Search
Engine Marketing and
> Search
> Engine Optimization.
>
>
> -
I purchased an Iphone 5 and I'm looking for a car charger, when will they be on the market?
AppleIsMyHobby wrote:
I would just advise that you be careful with old model chargers that were built for 30 pin to USB connectors for the old iPhones. They may not work for the iPhone 5 and/or they might damage the phone/battery etc. The best plan would be to wait for some kind of charger that was made for the iPhone 5.
Nonsense; USB outputs are an industry standard, there is no danger in using a USB to Lightning cord to charge your iPhone 5. -
Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C -
Problem Please help me.....Let me know the area to look for it
Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es -
We are currently looking for a way to link images to a design file within programs like InDesign and Illustrator using an HTML link instead of a local file. We are hosting our images in SharePoint and need the design file to retain it's links, no matter who on our network opens the design file.
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
one question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to change that setting?
TYThe History menu can only show that fixed maximum of 15 as that is hard coded.
Maybe this extension helps:
*History Submenus Ⅱ: https://addons.mozilla.org/firefox/addon/history-submenus-2/ -
I'm looking for the stock footage that you see in iMovie at the apple store.
I'm looking for the stock footage that you see in iMovie at the apple store. Does anyone know where to find it.
Credit Safebrowser
The Padlock is no longer part of Firefox; it was removed beginning in Firefox 4. The padlock shows that there is a secure connection but does not supply additional information. You could have made a typographical error and still have been connected to a secure connection. The padlock was replaced in Firefox 3 with the Site Identity Button. Familiarize yourself with the Site Identity Button at the left end of the Location Bar:
https://www.mozilla.com/en-US/firefox/security/identity/
https://support.mozilla.com/en-US/kb/Site+Identity+Button
http://www.dria.org/wordpress/archives/2008/05/06/635/
You can install this add-on if you wish:
https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/ -
What application does an iMac come with that lets you see the core of its system, and what would you look for to determine if malware was on it?
This extension?
*FireBug: https://addons.mozilla.org/firefox/addon/firebug/
Firefox 4 also has a build in inspector: Firefox > Web Developer > Inspect -
Are you looking for the GP APIs for NW04s SP7? I've got them.
For those who are looking for the GP APIs for local development of webdynpro and background callable object with GP interface, I've got them and will submit a how-to to SDN if needed.
Just post your interest under this post and mention which SP (SP7 or below) you'd like them. Thanks, AndreWish granted. Here is the SDN link to the how-to document which include reference to the downloadable APIs. Enjoy!
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f7be53bb-0b01-0010-1c96-be3cb6799c1b
I've got a blog entry referencing that how-to link as well /people/andre.truong/blog/2006/06/26/working-with-the-apis-of-caf-guided-procedures-nwdi-or-local-development
Post comments there if you got any. Thanks, Andre -
Are you looking for work in the UK?
I have various Labview contract and permanent positions available
across the UK. If you would like to know how much you are worth,
please email your CV to [email protected]
I look forward to hearing from you.
Tom Puffett.
Sent via Deja.com http://www.deja.com/
Before you buy.Yes! I am looking for a job in this area. Currently working at the University of California in Davis, but the project I am hired for is almost over. I am a mechanical engineer, but do have experience with electronics and instrumentation from my current job. I don't want to brag my Labview experience, but I think I can handle pretty good. I am also persuing certification.
Please do not hesitate to contact me: [email protected]
aartjan -
What features are you looking for in nforce sound
assuming the new drivers do sort out every ones troubles ,what next in the way of features would you like included in nforce sound drivers
Quote
Originally posted by BeaverPants
Quote
Originally posted by djmorgan
Sorry, but not true a stereo sound is converted to prologic 5.1 by the apu at least in SPIDF out.
However true 5.1 requires an encoded 5.1 signal and if that is present then it will be decoded that way - or is that the other way around decode/encode - still this is from somebody that enjoys 5.1 stereo.... 8o
yeah. DJ is right.... all my sounds are converted to 5.1.
even if thay are stereo.
like wav's.
MP3's
AIM, MSN, sounds
play out all 6 speakers
From what i know, not.
The Prologic comes from your decoder on the other side of the SPDIF. Mine has 2 different settings for prologic and DD and does not switch automatically.
As for MP3, it only works with the good winamp plugin.
Do a very simple verification: Take winamp, use waveout plugin, play an mp3 and look at the sndstorm panel.
You'l see that on the equalizer only the front speakers are moving (plus the sub and center if you have checked the "create center" and "create LFE" in the speaker setup). The fact that they react to the created channels but not on the rear proves that your sound DOES *NOT* come from the APU, but from your receiver.
Frenchy -
How do you look for small projects?
Hi. I'm working as a labview developer and I'm looking for small
projects that can help me financially. Are there any site where I can
find some work that involves labview programming? I'd like to work as
a consultant for those projects and they can be as small as $100 or
so...
Any of you who's looking for a labview consultant is also welcome to
give me any work.
Thanks for reading.Maybe here:
Apple Retail Store - Genius Bar
I really do not understand your question -
Looking for 12v car charger with AUX
When my 1st Gen Touch met an untimely end, I bought a 2nd Gen, only to find that my Belkin auto adapter with AUX adapter wouldn't charge the new Touch.
Any suggestions for alternatives? I'd seem some less than favorable reviews on the Apple Store site for the Kensington Liquid Aux.
What I'm looking for:
1) 12v adapter with AUX adapter.
2) no mounting arms, as in the DLO TransDock Direct or Griffin Tuneflex Aux. Unfortunately, my car's AUX input (and the 12V adapter I'd use) is in the center console, under the armrest. Anything with a thick arm won't let the armrest close--and something like the TransDock Direct won't even fit inside.
3) I'd like to avoid, if I can, anything with controls on the 12v adapter--again, it's inside the console, and I won't be able to access it.Kensington LiquidAUX for iPhone and iPod
http://store.apple.com/us/product/TR824LL/A?fnode=MTY1NDA0Mw&mco=MTA4MzcxMDg
no stand, but has a wireless remote.
Belkin TuneBase Direct with Handsfree for iPhone
http://store.apple.com/us/product/TY247LL/A?fnode=MTY1NDA0Mw&mco=MTM3NzgxNDQ
I like this one because it also double as a hands free car kit
Monster iCarCharger AUX 1000 for iPhone and iPod
http://store.apple.com/us/product/TW684LL/A?fnode=MTY1NDA0Mw&mco=MTA4MzY3NTI&p=1 &s=topSellers
Kensington LiquidAUX Deluxe for iPhone and iPod
http://store.apple.com/us/product/TR951LL/A?fnode=MTY1NDA0Mw&mco=MTA4MzcwODQ
this one has a wireless remote that you can strap onto your steering wheel to control music playback. it's much easer to use then to try and use your touch screen while driving.
Message was edited by: Sherman Campbell -
Hey I have just downloaded pages and I am looking for the glasses template that you shown in photos
I am looking for the glasses template that shown on photo lab of Pages? somehow I am unable to find out them
Hey,
When I saw Pages app in apple store, it shows some photos of "how that app will work and.. what are the contents they havein it". I just wanna to make the documet like they have shown in the photographs .... the tamplate of Cariati glass, I thought pages app will have ready tamplates of glasses... it is one of the most stunning template I have ever seen... please help me for to find where they are..
here i will attach a screen shot ...
I wanna make the same documents as they show here...
Maybe you are looking for
-
PR created after MRP run, instead of schedule line
Dear all, I want to create schedule lines automatically from the planning run, for raw material. I have maintained info record, scheduling agreement, quota arrangements and also the source list. For the raw material, safety stock of 1000 nos. has bee
-
Accessing variable of a datatable from Java Code
Hello, I am trying to present a list of objects with a jsf datatable. However, each object needs to be rendered differently, so, I am including another JSP fragment, depending on the datatype. JSP code follows: <h:dataTable value="#{pc_ConsultaClient
-
Two topics - One a general question and the other related to Mac OS/X 10.4
I need to update my email address and I can't seem to be able to find a way to do in this forum. Can you help me with that ? The other issue is that since I got my MacBook Pro I am having problems with my USB Flash Drive. Either I can't read from it
-
Error!! in starting remote object registry
Hi! To start RMI Registry on server ,I execute the start rmiregistry command at command prompt. But it gives me an error message stating that 'c:\jdk1.4\bin\start' is not recognized as internal or external command,operable program or batch file. I am
-
My company upgraded our operating system to Windows 7 and upgraded InDesign to CS6. Unfortunately my ancient (yet awesome) mouse no longer works due to driver incompatibility. They no longer make this mouse so getting an updated version/driver is not