Are you open to SAAS Network management and monitoring?

How comfortable are you with the idea of managing your network switches/routers/Wireless AP/DNS/DHCP from outside your network?
What happens when your Internet connection fails?
Even with encryption (VPN/SSH Tunnel/SSL), can it ever truly be safe?
What environments would this be ideal for?
What are you're thoughts?

Similar Messages

Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?

Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
What can I do now that I installed the flames of **** onto my computer?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Are you still able to get apps and games that use the 4.2.1 version?

are you still able to get apps and games that use the 4.2.1 verson on a second generation ipod touch?

Yes. To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.

OWSM Vs OSB: Security, Management and Monitoring

Has anyone done a comparison of the Security, Management and Monitoring capabilities of OSB 10gR3 and OWSM?
I think both of them have a place in the architecture, but I am looking for pointers on the overlapping capabilities in terms of security and service monitoring. When is one preferred over the other with pros and cons.
Thanks,
-J

In short OSB you configure process by process. OWSM is a layer you can put across your whole enterprise.
Other than that the functionality is very similar.
cheers
James

Favor to ask : can you open this labview 2009 Vi and save it for me in a Labview 8.6 readable vi ?

Hi guys,
I have a favor to ask : May somebody would be nice enough to open this Labview 2009 VI and save it in a Labview 8.6 readable VI ? You'll probably have some missing blocks cause I use specials ones but I don't want to have to re-make all the VI.
Thanks you very much
G.
Solved!
Go to Solution.
Attachments:
Control3.vi ‏29 KB

notimperial wrote:
Probably not the right place to do this, but could someone onpen this in labview 2010 and save it in a format compatible with labview 2009?
Thank you in advance
You are right we have a thread for this here.
http://forums.ni.com/t5/LabVIEW/Downconvert-VI-Requests/m-p/1067229
Here is your vi please use the downconvert thread next time.
Tim
Johnson Controls
Holland Michigan
Attachments:
WFMreaderIII.vi ‏53 KB

Can you open a closed network?

I can no longer access the secure wi fi network set up on my Mac Pro, and must use the (insecure) network that came with my router. The regular network name doesn't show as an available network, but I know it is still there because both the name and security type appear when I click "advanced" on System Preferences/Network. I have apparently changed my regular network to "closed" by accident.
I have tried unsuccessfully to sign in as "other network", providing security type and passwork, but it doesn't work.
I need a way to open this closed network. Is this possible? How?
If it is impossible, what must I do to start over?

I have apparently changed my regular network to "closed" by accident.
Or the network is no longer available, temporarly shut down, or you were purposely locked out. Contact the network admin.

IPv6 Network Management and IP SLA

Hi,
I have to plan a network infrastucture with MPLS-IPv4, IPv4 and IPv6 routing tables.
Since I have an hybrid network and dual stack IPv4/IPv6 routers I must manage both protocols for all boxes using SNMP and IP SLA.
Can the SNMP IPv4 traps from the router targeted to the network management station carry information about IPv6 interfaces ?
I found the IP SLA is supported in IPv6 networks for some measurements, is required IPv6 enabled on the IP connection between the management station and the responder?
Thanks
Massimiliano

First, traps can be sent over IPv4 transport and contain IPv6-related varbinds. Second, I'm not sure I understand why you would need IPv6 enabled between the management station and the responder. The management station will only perform IP SLA configuration options on the IP SLA source device.

What are the best practices for Database management and performance tuning?

Hello,
I want to ensure that I am using the best practices for managing and maintaining our Database.
Is there any documentation out there that outlines how to maintain and ensure top performance out of our database?
Thank you!
John Sefton

I appreciate the responses, however this is not the information I am looking for.
I am specificaly looking for best practices invloving the managment and performance tuning.
Example: are their tools that I can install that will monitor the size and response time of the database and alert me if there is degradation in performance?
Are there specific periodic activities I should be doing to garuntee that my database will continue to function that way it is supposed to?
Or is this a fire and forget solution that does not need this attention?

Network Manager and Wireless

I have a Broadcom 1390 mini wireless on a Compaq v3000 series laptop with AMD Turion64 processor.
I have been trying to activate it for some time now. bcm43xx did not work. i compiled ndiswrapper, blacklisted bcm43xx and managed to get wireless detected. I used wifi-radar to connect, but strangely the gnome network applet and wireless network manager showed as no network though wireless was connected and working. I had enabled wlan0 in rc.conf and all details entered as per the wiki.
I removed networkmanager from rc.conf daemons and added network. Now wireless connects at boot without a hitch. No need for wifi-radar. This is after so many reboots that this occurred to me, so I thought i should share this and perhaps find out if there is something wrong in my approach. I am new to Arch (about a few months) though I have been with Ubuntu, CentOS etc for a few years now

Coinago:
Your enc idea did not work...
How does one enter WEP key 10 digit hexadecimal in rc.conf etc. I tried it straight, then XXXX-XXXX-XX both as key and as enc. It did not work. Do I have to insert an "=" somewhere. I am a bit at sea. I got the wireless going thru wifi-radar. I use gnome, no KDE for me.
I would like to crack this so i have wireless at boot in my office. It was working fine with entries in rc.conf when there was no key. So it is obviously about entering the WEP key in the right format and place..

Firefox crashes when I navigate pages on grooveshark, try to open the add-on manager, and when I visit any number of random web pages. What is wrong with it?

Firefox never crashes immediately on startup or when I close the windows, but it crashes usually soon afterwards. It always crashes shortly after I open the add-on manager, so I can't even see which plugins I have that might be causing problems.

See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.com/kb/Firefox+crashes
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). 
You can find the IDs of the submitted crash reports on the about:crashes page. 
You can open the about:crashes page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
*https://support.mozilla.com/kb/Mozilla+Crash+Reporter

Network Manager and 802.1x

I dont have a problem with this I just would like to know where network manager stores the config files that contain the SSIDs.
My problem is that Im trying to connect my motorola droid that is running a custom froyo rom to my Universitites secured Wifi since its a pain in the butt to keep logging in every time on my droid. Whats really bugging me is that my friend has a nexus one running the same rom and he can connect to it but I cant!
I figured I'd rip the settings from wpa_supplicant.conf and copy it to my droid but I'm not using wpa_supplicant on arch :-/

I dont have a problem with this I just would like to know where network manager stores the config files that contain the SSIDs.
My problem is that Im trying to connect my motorola droid that is running a custom froyo rom to my Universitites secured Wifi since its a pain in the butt to keep logging in every time on my droid. Whats really bugging me is that my friend has a nexus one running the same rom and he can connect to it but I cant!
I figured I'd rip the settings from wpa_supplicant.conf and copy it to my droid but I'm not using wpa_supplicant on arch :-/

What is the best product for network mapping and monitoring? I am an inexperienced user). Mac 10.9.2 laptop

I have lots of questions, but the gist is that I want to know the best product, preferably from the app store, that I can use for network mapping mapping and monitoring.
I want to get their mac address or other police trackable etc info so I can use my computer safely.
I am also being cyberbullied.
I try just using ethernet but still get intruded on, for instance, messages that "other devices are using my ip address". The only other device I own is an iPod that I keep sahut off plus wifi turned off then.
(NOTE: You can skip the rest of this message if you want. It regards hacking attempts etc, a little out of the scope of discussion, perhaps).
Also a home intrusion where computer was thoroughly hacked with router(s) set up "very very close to me," according to Apple.
Also, hackers get into my Facebook and gmail and yahoo mail, really, no matter what I try to do on my computer and how many times I change passwords it does no good.
Also, The ip addresses for google and the one in syste preferences and the one looking up my ip address on ip chicken always gets three different results.
More worrisome it that hackers got into my Wells Fargo account a week after the intrusion even though I changed all account #'s and pw plus notified bank. They also broke into paypal using my new account numbers.
Also, stuff like Facetime pops up on my computer without my clicking on it even though I'm using ethernet to connect. I've given up on Time Capsule because I'm told that's how the hackers hacked my computer so thoroughly duriung the intrusion.
Thanks.

Aubry,
why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
G.

Its like pop ups and ads are always open in like the backround and when i open a new tab i see like dozens of them. how do i fix this?

it well looks like the pop ups are frozen into firefox or something. i uninstalled firefox 3 times to fix this and its still there. i dont even know how to properly describe it.

Do a malware check with some malware scanning programs on the Windows computer. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

When I use Tab Groups, can I have some tabs that are always open together with a group, and just switching the groups that are besides the "always showing" tabs?

I like to have some tabs always open, like for example the facebook page, while others I need only occasionally, like Ebay / Work / Fun (which I could put into Tab Groups). So I was wondering if it is possible to have the following configuration:
Always open Tabs (e.g. Facebook, Myspace) and then next to that ONE of the Tab Groups (e.g. Group Ebay Stuff and Group Work Stuff and Group Fun Stuff)
or alternatively have TWO Tab Groups open at the same time, like Group A and Group B, and then switch to Group A and Group C, then Group A and Group D, then Group A and Gourp B again.

Hmm, well you can right click a tab you want always open and click "Pin as App Tab". I personally don't have much experience with Tab Groups, I'm just learning how to use them.
Hope this helps!

Network Manager and WPA

I am having a hell of a time getting my wireless working. I have gotten it working in an 802.11x network and an open network. My wireless card is the Dell 1505 draft-n card in my dell vostro 1400. I am using ndiswrapper with bcmwl5.inf driver. The router I am connecting to is a draft-n network but I am not sure if that would matter since it broadcasts b/g signal anyway.
I do not get any errors when entering my password in the gnome prompt, but it just times out. I have also tried the wpa_supplicant config (the manual way) with the same outcome. Any ideas on what to try?
I am launching networkmanager and networkmanager-dispatcher in the rc.d with !network

Please try netcfg2 - it is in testing, but as far as I'm concerned it is stable as a rock. Your problem might be related to WPA2 (I don't know if WPA-supplicant supports this)
Check the 'announcements'-section or the wiki for news/info about netcfg2
Zl.

Are you open to SAAS Network management and monitoring?

Similar Messages

Maybe you are looking for