Are you sure you want to edit information for multiple items?

Hi all,
I'm getting this dialog box consistently now, not sure why. I get it when I select a single album from a single artist, for example. I get it when I select a couple of tracks within an album from an artist. Bizarre!
It became apparent to me as I added artwork for albums that didn't have any... Any idea why iTunes has started behaving this way and what I can to to get it to behave normally?
Thanks for any insights...

Chris CA wrote:
Yes it is normal behavior because you are selecting *more than one item*.
I have never not gotten that message if I select more than one item.
It should appear and has always worked that way because it is more than one item, regardless of anything else (same artist, same album, etc.).
You can check the box, *"Do not show me this again"* and it will not appear.
Okay, I might have checked that box. Still, sometimes I do get that dialog popping up.
How would you explain that if not with different values in the metadata ?

Similar Messages

In my contacts, I want to edit information. Some of this information is 'grayed out' and I am not able to delete it - any suggestions are greatly appreciated. Thanks

In my contacts, I want to edit information. Some of this information is 'grayed out' and I am not able to delete it - any suggestions are greatly appreciated. Thanks

For example: SusanX has quit her job and I still have her employment email address and phone number. All her other information is the same but I want to delete the information no long viable. When I go into edit mode the information is grayed out and is not deletable. I went to my iCloud and tried to delete it there, no luck.
I am thinking I might just have to delete the entire contact card and just start from scratch with only her current information. Seems like there should be a way to delete only parts of the information rather that resort to start a new contact card.
Thanks for your help. I appreciate you taking the time to advise me on this.
Mona

//remove this line if you want to edit the code by hand? um which line?

Several of my pages are locking up and I don't know why. As I work through the code, I remembered that I altered some text in a SendEmail by directly altering the page rather than using the Server Behavior. Don't understand why that would matter but whatever...
Now as I ponder if that is causing the problem, I ran across this commented line in the code:
//remove this line if you want to edit the code by hand
But are they talking about the line just after that line of //remove or do they mean the actual comment line of
//remove this line if you want to edit the code by hand?
Thanks for your help

Trigger and $tNG look suspiciously like ADDT code to me. Ask the guys in the ADDT forum (http://forums.adobe.com/community/dreamweaver/addt). There are a couple of them in there who know the code intimately. I haven't touched ADDT for ages.

HT3964 my macbook air keeps coming up with a message" are u sure u want to shut down..etc" after which it switches off by itself. now it's off and will not power on altogether. any suggestions?

my macbook air keeps coming up with a message" are u sure u want to shut down..etc" after which it switches off by itself. now it's off and will not power on altogether. any suggestions?

Does it power on if you plug in the charger?
But to be honest I see in your description it says 'Late 2011' so there is a good chance you have warranty right, I would take it to Apple store and let them sort it out

I rcvd an AppleService emaiDue to recent updates we are asking many of our customers to confirm their information this is nothing to worry about. We are making sure we have the correct information on file..." Is this real or a scam?

I rcvd an AppleService email
Due to recent updates we are asking many of our customers to confirm their information this is nothing to worry about. We are making sure we have the correct information on file and that you are the rightful account holder. Failure to comply with this may result in your account being suspended.
Is this real or a scam?

If you changed your Apple ID, you will not be able to update any of the content that you used in the past. The worse case scenario here would have been to change the password. Really all you needed to do was go on the Apple site and change the password, unless you provided them with information. This will make it difficult for you to deal with turning off Find My iPhone and other Apple ID related steps. All you really needed to do was delete the email.

Can you please provide the information for writing ocp

Hi,
Iam planning to write OCP exam, can you please provide the information for it.
what are the courses i need to take.where can i get the study material for it.
Looking forward for your reply

The 9i OCP track is 2 plus 2 exams plus a hands-on course. Follow the links you got above.
The best study material, if you really want to study and get to know the stuff, is available here on OTN. Download and practice the Database together with reading the Concepts, SQL Reference, Admin and Performance tuning guides from 10g or 9i libraries.
Use the Search to lookup concepts, syntax etc.

May you please provide some information for Cisco 1600 AP is better than Juniper AP ?

Hello all,
May you please provide some information for Cisco 1600 AP is better than Juniper AP ?
I would like to know some comparison test between Cisco 1600 AP with Juniper AP.
Thanks very much !
Crows

you cannot compare like this you need to compare it with model by model just compare the data sheet of both .But remeber cisco has larger portfolio and is ranked better then juniper in Gartner report 2013 you can you that in reference.
********Do rate helpful posts*************

HT201359 When you have been charged twice for same item, how do you get your money back?

When you have been charged twice for same item, how do you get your money back?

Morning Domangere,
Thanks for using Apple Support Communities.
Following this article refund will be an option.
For more information on this, take a look at this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Best of luck,
Mario

'You do not have permissions for this item' - MATERIAL SPECIFICATION

Dear members,
I am trying to access a Material Spec but I am persistently presented with the following message: "'You do not have permissions for this item'".
Funnily, I was previously able to access the specifications but now I am presented with this.
I have the same issue with LIO Profiles.
Does anybody have a known solution for this?
Kind regards,

This usually occurs when you do not have Read permission according to the workflow status of the specification. Different permissions can be set up for different statuses in WFA (WorkFlow) Administration.
Also, if you are using the Business Units as Security feature (rather than just BU visibility), you could get this message. In this case, you should not be able to see this spec in a search result though, so if you can see it in the material spec search page results, it isn't a BU issue, it is a workflow read permission issue.
There is one additional possibility, which is if your team has implemented the SpecVetoHandler extensibility point, which allows for added custom read permission checks. This is a technical extensibility point configured in the CustomPluginExtensions.xml config.
But most likely, it is a workflow permissions issue. You'll have to ask your workflow adminitrator user(s).
Regards
Ron

I can no longer edit information for streaming files in Get Info.

I can no longer edit information for streaming files in Get Info.

Similar problem here. My Ical refuses to edit or delete events. Viewing is possible, though sometimes the whole screen turns grey. Adding new events from mail is still possible. The task-pane completely disappeared. My local apple technic-centre messed about with disk utility for a bit and than told me to reinstall leopard. I could of course do that, but it seems to me that reinstalling Leopard just to fix iCal events is a bit invasive.
I tried also tried removing everything, installing a new copy of iCal from the leopard-cd, software updates, all to no avail.
At the moment I'm open to all suggestions that do not include a complete leopard reinstall.

How to edit "license information for multiple logon" screen

hey gurus
i need to know how to edit or modify the 'license information for multiple logon" screen. this screen usually pops up when a user tries for a multiple logon to sap. We have activated the parameter 'login/disable_multi_gui_login' but we would like to modify the screen in such a way that only one radio button which says 'terminate this logon' should exist. we would prefer to remove the option of 'continue with this option and end any other logon'. Now i searched but i could not find anything to implement this so i am here and i need your advice and suggestions.
thanks in advance.
cheers.
nate

hey bernhard
many thanks for your reply..i appreciate your help. its just that its not explicitly mentioned we cant modify the screen in the note.
Is there any other note that specifically say so?
thanks for your time buddy.
regards

How to suppress License Information for multiple logon screen?

Hi,
While LOGIN we will get "License Information for multiple logon screen" will displayed.
How to suppress that screen.
Regards,
Bala

>
bala virupaksha wrote:
> Hi,
>
> While LOGIN we will get "License Information for multiple logon screen" will displayed.
> How to suppress that screen.
>
> Regards,
> Bala
and why would you want to do that?
does your contract with SAP say, that you may use multiple logins for free? would SAP's contract-issue department agree that -in your case- it's not necessary to record multiple logins?
have you read this part of the SAP license policy?
SAP gives express notice that the accessing of a system by more
than one person using one and the same named user constitutes
a breach.
tell me this does not apply to you ...

I want a push button for line items in my sales order entry screen.

Hi,
I want a push button for line items in my sales order entry screen.
How can I do so?
Thanks.

Hi Kumar ,
To have a push buttons you need to first assign a pf-status .
here a sample code for a push button and its handling :
set pf-status 'SELECT' .
at user-command .
describe table t_lpr lines w_lines .
case sy-ucomm .
    when 'SELECTALL' .
      set pf-status 'SELECT' excluding 'SELECTALL' immediately.
      do w_lines times .
        read line w_line field value w_check . " INTO W_CHECK .
        if w_check = space .
          w_check = 'X' .
          modify line w_line field value w_check.    "INTO W_CHECK .
          add 1 to w_line .
        endif .                        " IF W_CHECK = ' '
      enddo .
Thus when you say pf-status say 'select' , Double click on that and you find a screen eher you can select icons and assign a function code to it!
Hope it helps!
Much Regards,
Amuktha .

Are you able to edit music

I want to use my ipod to play music at our wedding in three weeks time and one of the songs I have on CD I want to edit before loading it onto my ipod. I want to remove the intro to reduce the song length. Am I able to do this ??? Thanks

There are a couple ways to go about this.
One is to simply import to iTunes. Then select the song you want to shorted, do a Get Info, then under the Options tab you can set the start and stop times. The default start is of course 0:00. All you have to do is set the Start time to be after the intro part you do not want to hear.
After that sync it to your iPod and check it, but it SHOULD start playing at the start time you specified. You can also set stop times as well to shorten songs.
You can also "physically" trim the songs either in iTunes or with third party applications outside iTunes to actually create new files with only that part you want. But see if the iTunes Start/Stop option above works for what you need. If not, they we can suggest other ways to do it more permanently.
Patrick

Are you able to edit these files (link to HDR-CX560V files)? Please try and post.

Before I buy FCPX, I'd like to know if my camcorder 1080 / 60p files work. Someone suggested I put them online via dropbox and post the link. I would appreciate your help.
In the archive, there are two things... #1 the complete backup of the media structure from the camcorder and #2 the file converted to a 60p mp4 via premiere elements via a tweak (to enable 60p editing).
Can you edit the file without something like clipwrap? Would you mind posting the file?
What about clipwrap?
Here's the link:
http://dl.dropbox.com/u/33209268/Archive.zip
Thanks!
- N

Hi bsan821,
Are you trying to fill in the forms, or actually edit the PDF? If you need to edit the PDF, you would need to download it and open it Acrobat (Reader doesn't allow you to edit PDFs).
If you're just trying to fill in a PDF form, that's a different story. You should be able to do that in a browser. Please see Acrobat Help | Filling in PDF forms. What web browser are you using, and what happens when you try to fill in the forms?
Best,
Sara

Are you sure you want to edit information for multiple items?

Similar Messages

Maybe you are looking for