Are you using a shield *and* a case?

I tried and failed to put my invisible shield on last night (see invisible shield application thread) and today have been looking for a good case to use while I figure out what to do and am wondering - is anyone using a plastic shield and a case? I figure the case protects against shocks and most scratches, while the shield is ultimate scratch protection. But I'm wondering if I get the kind of case it can stay in all the time (hoping for the iSkin evo3 soon) then do I really need a shield?

I got my IPOD video (30GB) just a few weeks ago, when I purchased it, I couldn't find a case for it in the store, so I spent a good amount of time online looking at the different options and searching for the best to work with my IPOD.
I found a case that protects the corners, the click wheel, the front and back of the IPOD. The case fits my IPOD, but isn't too tight, and the IPOD most definately doesn't slide around. The case comes with a wrist strap, as well as a neck lanyard, and also has a belt clip on the back. There are holes in the case for the headphones, hold button and the dock connector.
Also at this website I found a clear protective shield that goes on the front to protect the screen, it fits down the face of the IPOD, and fits inside the case as well.
I purchased both these items for around $30.00, and I must say after some of the reviews I read on the internet about some cases, I believe I've found an excellent case.
You can shop for it here...
www.ipodaccessories.com
they sell leather cases, as well as 'tubes' (which is what I bought, screen protectors (which they call 'full body screen protector'--which I also bought.)
GREAT ACCESSORIES FOR all 5th Generation IPODS!
Built it myself   Windows XP  

Similar Messages

  • How are you Using iBooks Author and Samples

    I'm curious to see how everyone is using iBooks author to create books. Are most people copy/pasting content into their book or are they directly writing the content in the book? How many have just imported the information from another word processing program? Who is using the program for creating books for children, entertainment or work-related functions?
    And that being said, I'm also interseted to see samples of how the books of others look on the iPad, including if possible the children's books, entertainment books or the work-related books. (Including how they incorporated widgets, theme in the pages, fonts, etc)
    Me personally, I have been developing two books using iBooks author for work related fuctions. The first book is a training manual for a software program; the second book is a guide to all the reports that can be created in the software program. Both books have been well received by clients.

    I generally find that, for creating the text, I'm better off with the word processor of my choice. That way, I get to focus on content and structure and I don't get distracted by layout and formatting issues. While working in the word processor, I use only the simplest of styles. (Logical styles rather than visual ones, the equivalen of HTML <H1>, <H2>, etc.
    Once I'm happy with the text and I've done the copy editing, I import into the page layout program and do the layout.
    Cheers,
    Michi.

  • Are you using After Effects and are looking for plug-ins?

    AV3software.com has all the plug-ing you are looking for, all centralized in one website all available via download at a very attractive price.
    Check it out www.av3software.com

    Hi Michael,
    That's not really the right forum for that, Adobe as an extensive list of those plug-ins on their own web sites, here's the link:
    http://www.adobe.com/products/plugins/aftereffects/main.html
    Best,
    PJ

  • Are you using JDev 10g for Web Services, service oriented development?

    An author from a magazine is interested in talking to JDeveloper 10g Preview users about Web Services, Service Oriented architecture and related developer-oriented issues.
    If you are currently using JDeveloper 10g and are willing to be interviewed for this article then I'd appreciate it if you could drop me a note at [email protected]
    Thanks,
    Arun

    You must use Network Shared Variables, or raw TCP at this point. However, you should keep your eye out for LV 2013, as significant enhancements have been made to the exact use case you have referred to.

  • Looking for a drum loop app that will run in the background. What are you using?

    Looking for a drum loop app that will run in the background. Suggestions? What are you using? I tried Loopseque and I like it, but I can't make it run once I switch apps. Help please.

        That's definitely strange, kzmidge. I want a working phone in your hands though. I noticed you mentioned you received the suggestion to complete a reset. Did you already do that? Is it working again? Are you receiving an error message?
    If you hesitated a little longer to complete the reset, you can try to place your phone into Safe Mode http://vz.to/rxg0ii and see if you can access mobile sites from your browser. This mode will stop 3rd party applications from running, so you won't be able to use the apps you mentioned but we may be able to narrow down the trouble in Safe Mode. If the mobile sites work, that means the trouble may be in a recently downloaded application and you may be able to avoid the reset my uninstalling some of your more recently installed applications. If it's still giving you trouble, the reset http://vz.to/18wzOCi is the next best step.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Final Cut Pro X witch Blu-ray Burner are you using ...

    Using a Mac Pro Tower like the Mac Pro 2012 or similar what are the Blu-ray Internal Burners do you use ; LG or Pioneer , witch Model Number.
    Creating Blu-ray on the Mac is fantastic but witch brand and model numbers for the Big Mac Pro Tower are you using with exellent results now.
    On the Mac Apple Pro Apps or Roxio Toast Titanium are the only left options who are current and updated , but burners specified for Windows.
    Frustration come when you talk to Apple they say not supported , Burners makers LG or Pioneer will say we dont offer support on the Mac.
    Well if you can create Blu-ray on the Mac but cant get any help to burn it it is very frustrating and Not So Pro if Apple care for the Pro Users.

    I use the new Mac Pro 2013. Final Cut Pro X version 10.1.4 and Maverick OS 10.9.5. An external Blu-ray burner LG BE14NU40. I've use single burn Blu-ray discs from brands like Maxell and Verbatim. That works fine. I have double layers Blu-ray discs not tried. I use it for home video’s.
    DVD single works fine too. DVD double layers I have not tried but will also work i think. Reviews on LG USA stated that Roxio Titanium with corresponding plugin works.
    I'm glad I found a blu-ray burner that works with FCPX.  Compressor 4.1.3 but I have not been working with the LG burner. Not yet!

  • What are you using as a Flash replacement for 64-bit machines?

    Hi,
    I was reading about the vulnerabilities in Adobe's Flash and decided to remove the offending package. I opened Chromium to make sure my Flash still worked, as I understood that Chromium implemented another method for rendering Flash stuff. I was wrong. For example, YouTube tells me that I need Flash 10 or higher. I tried to re-install the flashplugin package, but it is no longer in the repos.
    I can live without Flash content, but it's nice to have.
    So the question is, what are you using instead, that can be installed from the main repos?
    Many thanks,
    Chris.

    I have installed both lightspark 0.4.3 and gnash 0.8.8, since lightspark should be able to 'fall back to gnash for older videos' (see changelog of lightspark).
    I have tried some flash-websites in firefox and all of them seem to use gnash and there was 1 website that didn't load the content (www.deredactie.be - our national tvstation). So, I'm under the impression that lightspark is not used by firefox.
    Has anyone found out how to do this?
    Secondly, gnash should be able to use VA-API (hardware acceleration). Is it just a question to install libva and let gnash do the rest, or does one have to recompile gnash to build the support in?
    Zl.
    PS: to whoever thinks flashplugin is the 'real flash': gnash has beaten it in terms of providing hardware acceleration. hooray for opensource!

  • What browser are you using with OS 9.x?

    Would you all please state which internet browser you are using with OS 9.x and the strengths/weaknesses you are experiencing with it?
    I switch back and forth between Mozilla and Internet Explorer but fewer and fewer websites work properly with them. If there is a better browser than those two I would add it to my old Wallstreet running 0S 9.1.
    Again, what browser are you using with OS 9.x and what are its good/bad points?
    Thanks!
    Message was edited by: Paul Stamser

    (Almost forgot
    I have an iCab filter set up for Yahoo on my OS 9.2.1 iMac.
    For the URL string I use (asterisk)yahoo(asterisk)
    For the Scripts filter I use the Netscape identity and have all versions checked except "JScript", and everything is checked in the "Allow" section.
    For the Network filter I use the Firefox identity and have the HTTP "referer" set to "Always".
    I don't use Yahoo Mail much on that machine, but those settings allow me to use the Address book to select addresses and send messages with attachments. (I'm not sure about viewing attachments, though, and I'm almost positive that address auto-complete doesn't work.)
    Cheers,
    K.S.
    (I use iCab 3.0.5)
    Message was edited by: K.S.

  • Are you using the new features?

    Some of you were very loud about getting certain features for PlayStation 4 and some even complained that they weren't available on day day1.
    You asked for suspend/resume, a media player, dlna, the ability to pause downloads and you got it.
    So are you using these new features?

    Suspend and resume... for endurance racing modes on PJ Cars...Theres no save race status, kill the game lose the hole  1 hour 30mins race... sleep mode is on so if you pause the game the PS4 powers down and saves the game status.... Tested DLNA don't need it allready used plex VIA web browser then the transcoding PS3 and PS4 app...Pause and cancel down loads used.  Music player use for PJ cars... As people stated if you Do not Use any thing then they vanish from the dynamic menu on PS4...Most are not even on the console untill a User hits the down load option... (technicaly you could use the youtube app to watch this...)   

  • Are you using the MathScript Node in LabVIEW or the MathScript Interactive Window?

    Are you using the MathScript Node in LabVIEW or the MathScript Interactive Window? I am very excited with the MathScript Node inside LabVIEW. However, I would like to see what other people think.
    Avalim

    Avalim,
    Personally, I am determining that I like to use the MathScript Node in LabVIEW.  It makes it easier for me to pass my data in and out of the LabVIEW environment!!  But, like you, I am excited to see what any other users think!!
    -Jeff P
    Jeffrey P.
    LabVIEW Product Management
    National Instruments

  • Are you using WebServices ?

    Hi Community !!
    Just few question, are you using WebServices as Data Services ?
    if so are those WS internal or taken from Internet ?
    if taken from Internet ...what do you think to create a Wiki Section with public and WS examples....
    Discussion is wide open
    Regards, Luis

    Hi Marcel & Benni!
    That's exactly the idea of this discussion, to share the information we have about WS as dataservices...
    In a demo i used a public WS to show a Dilbert image, i took the WS from the examples listed on <a href="http://www.esynaps.com/eSynaps_home.aspx">eSynaps</a> and works great!
    But, we want to know if there are others than use WS internally or from publics api's and to share their experience here ..... or in the Wiki section of course
    Looking forwards for more comments
    Regards, Luis

  • Which tools are you using?

    which tool are you using for modelling oracle objects?

    thanks, but is it possible to create (to the databse) both attributes and methods of oracle objects with sybase power designer or just attributes as a table?

  • Limit Preview Size. Which setting are you using?

    I'm not exactly sure how the Limit Preview Size preference affects my workflow. Which setting are you using, and why?
    My preference is currently set to the v2.0 default 1/2 Size. My iMac's resolution is 1680x1050, and I'm using the Canon EOS 1D Mark III taking full size RAW images at 3888x2592.
    regards,
    Gregory

    Gregory,
    I use the default (which is 1/2 size) with no ill effects. Previews are used by external programs to gain access to photos in your Aperture library. (This is not the way your external editor works, though.) Your preview size will not affect your workflow. When previews are turned on, Aperture works on generating previews when you have something new of which to make a preview. I seriously doubt that making a small copy, versus making a smaller copy, would affect how long it takes Aperture (and therefore, how sluggish Aperture might appear.) The difference between making previews and not making previews can be significant.
    nathan

  • General Forum Question: What Contact Synch Method Are You Using?

    This is a question directed towards all forums members using SynchManager to synchronize B2B customers between Web Tools and SAP Business One.
    Of the four possible methods listed below:
    - WebTools UserID Field
    - Email Address
    - BusinessOne InternalCode
    - Seek and Choose
    Which one are you using to synchronize your data?
    We're trying to decide between Email Address, BusinessOne InternalCode, and Seek and Choose.

    Hi Micheal,
    I can not tell you what people are using, but the pros and cons are as follows:
    Webtools UserID (the exposed field on the BP contact)
    This is the best option if you are willing to do the work of setting this property for all of you users in a meaningful way.
    Pros:  Allows you assign a meaningful login name for users of the website
    Cons:  You have to assign he userids (a lot of work if you have 10s of thousands of contacts)
    EmailAddress
    Pros:  hopefully, everyone knows their email address.  So this is a meaningful login name.
    Cons: B1 does not require email address, so the user will probably end up with an OCPR ID if they don't have an email address.
    B1 internal code
    Pros:  it always works
    Cons: no wants to be a number.  Your login name will be "1234", password = "whydoIhavesuchahorriblelogin"
    Seek and Choose
    I consider this the best option, unless you have a better algorithm to populate NPUserID than described below (let me know if you do )
    The seek and choose routine works as follows:
    1.  if they have an NPUserID, user that
    2.  if they have an email address, user that
    3.  use the B1 internal code
    Pros:  User will have the best possible login name. 
    Cons: You do not know which option the user ended up with
    One last note:
    v630 (p10--or whatever we are calling it these days), has added a login name to the Webtools user.  This addresses the glaring problem of not being able to change login name.  Now the user can change their own login.  (why did this take 5 years?).  Hopefully, this will make this decision less daunting.

  • Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Can you use earphone jack and continue to use blue tooth connection to speakers like bose

    Hi,
    I'm a owner of the X-fi Elite Pro, and for me the headphone + speakers settings works very well. Just to be sure, you bought the X-Fi XtremeGamer Falalty Pro Series? and not the XtremeGamer Fatalty Champ Series or even the old regular X-Fi Fatalty? If so, I'm quite sure you need the I/O box with the 6.35 mm (/4 inch) steroe jack. My headphones are connected through the /4 inch jack on the Elite Pro unit and my 5. surround system through the X-Fi card's 3x /8? mini jack.
    I guess you have to buy the X-Fi I/O Dri've Upgrade Kit (or the Console Upgrade Kit) to use your headphones and speakes at he same time. I chose the Console because i couldn't li've with a thick and ugly digital cable sticking out in the front of my PC?
    Hope it helped!

Maybe you are looking for