Are You Using Spiceworks Network Monitor?

Are any of you guys using the Spiceworks Network Monitor? I've had it running for about a week now and it's been quite eye-opening. Being a small dept, we do a lot of "set and forget" setups, so it's nice to have something that monitors all of these little installs and servers that we otherwise don't pay much attention to.  
This topic first appeared in the Spiceworks Community

Standard Def CRT production monitors with a blue only button on them are still available at a reasonalbe price. But if you're talking HD, LCD's have taken over the landscape pretty much (except for some CRT's from Sony that cost a TON of money)... You'll need a capture card or an Io HD to see it all externally, unless you're only talking HDV... that you could use a less expensive solution for...
DV can be monitored externally for the least amout of investment if you have a DV camera, you can send it FW DV, then send the analog outputs from a DV camera to a CRT.
LCD monitors though are close enough for a lot of applications... those with a blue only switch work pretty well actually. Panasonic's 17 and 26" LCD's are quite nice monitors I think.
Matrox's MXO should allow you to use a 23" Cinema Display as a monitor, but I've heard of problems with it and Color... so might just wait if that's the solution that works for you. They work really well now with the other apps...
Jerry

Similar Messages

  • Migration Monitor - How Are You Using It?

    Hello!
    In this short discussion, you can help us to better understand how you are using the Migration Monitor – this better understanding would help the team responsible for this tool to adapt their automated tests accordingly and would also influence the future development decisions in this area.
    What is the Migration Monitor?
    The Migration Monitor is part of the software provisioning manager as of SAP NetWeaver 2004 SR1, but can also be executed manually. It uses the EXT, WHR, STR, TPL files to control the unload and load, to accelerate the load by automatic parallelization, and to generate the R3load task and command files (TSK and CMD files).The Migration Monitor does the following:
    Creates R3load command files
    Creates R3load task files if required
    Starts R3load processes to unload the data
    Transfers packages from source to target host if required
    Starts R3load processes to load data as soon as a package is available
    Informs the person performing the system copy in case of errors
    How Do You Use the Migration Monitor?
    Only for sequential unload and load - that is, you first unload to a local system, transfer the export directory to the target host, and then load using this directory.
    For parallel unload and load:
    a) Unload and load using a shared network directory
    b) Unload and load using transfer by FTP
    c) Unload and load using sockets
    In your reply, please just name your preferred option (1, 2a, 2b, or 2c) – and why you prefer it.
    Thanks a lot for your support!
    Boris

    Boris,
    Options - All three but mainly Option # 2.
    Option # 1 - To dynamically increase the number of parallel process from Source system. But in case of homogeneous system copies with massive database sizes, the database proprietary methods comes in handy than the R3load procedures.
    Option # 2 - To reduce downtime in migrations (hetero combinations) thru parallel export/import of data loads.
    Hope it helps.
    Regards,
    Srinivas K.

  • How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account

    How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account to automatically send messages, such as firewalls or internet security software configured to send an alert when a potential security issue

    you can try:
    *Wireshark: http://www.wireshark.org/download.html

  • What do you use spiceworks for ?

    I will be the first...
    I use spiceworks for inventory and network monitor.
    I have 535 devices on inventory and testing the monitor.
    Use Zabbix aswell for monitoring my servers and switches. My helpdesk is made by our development team. And we have around 250 users

    Do you use spiceworks for helpdesk ? Inventory ? Network Monitor ?
    How many devices/user you got ?
    Only use spiceworks ?
    This topic first appeared in the Spiceworks Community

  • Will Verizon ever let you use two networks at once?

    Right now, Verizon lets you use only one network at a time (either voice or data network). In other words, you have to hang up to search the internet. Vetrizon's competitor, AT&T lets you surf the web and talk, simultaneously. Will Verizon, in the near future, ever let you use both networks at once? I think this a serious flaw in Verizon's service, and I hope they fix this flaw soon. I'd love some info.
    Thanks!

    With the iPhone 6 and 6P you can now do this if you turn on LTE Voice and Data and you are on the LTE network when you start your call (which is just about everywhere on Verizon now). I have been doing that since I got my iPhone 6P on the 9/19.
    There are also some Android phones that allow simultaneous voice and data.
    Older iPhones will not let you do this on Verizon.
    Basically look for a Verizon phone that is on the Advanced Calling 1.0 list.

  • What browser are you using with OS 9.x?

    Would you all please state which internet browser you are using with OS 9.x and the strengths/weaknesses you are experiencing with it?
    I switch back and forth between Mozilla and Internet Explorer but fewer and fewer websites work properly with them. If there is a better browser than those two I would add it to my old Wallstreet running 0S 9.1.
    Again, what browser are you using with OS 9.x and what are its good/bad points?
    Thanks!
    Message was edited by: Paul Stamser

    (Almost forgot
    I have an iCab filter set up for Yahoo on my OS 9.2.1 iMac.
    For the URL string I use (asterisk)yahoo(asterisk)
    For the Scripts filter I use the Netscape identity and have all versions checked except "JScript", and everything is checked in the "Allow" section.
    For the Network filter I use the Firefox identity and have the HTTP "referer" set to "Always".
    I don't use Yahoo Mail much on that machine, but those settings allow me to use the Address book to select addresses and send messages with attachments. (I'm not sure about viewing attachments, though, and I'm almost positive that address auto-complete doesn't work.)
    Cheers,
    K.S.
    (I use iCab 3.0.5)
    Message was edited by: K.S.

  • Looking for a drum loop app that will run in the background. What are you using?

    Looking for a drum loop app that will run in the background. Suggestions? What are you using? I tried Loopseque and I like it, but I can't make it run once I switch apps. Help please.

        That's definitely strange, kzmidge. I want a working phone in your hands though. I noticed you mentioned you received the suggestion to complete a reset. Did you already do that? Is it working again? Are you receiving an error message?
    If you hesitated a little longer to complete the reset, you can try to place your phone into Safe Mode http://vz.to/rxg0ii and see if you can access mobile sites from your browser. This mode will stop 3rd party applications from running, so you won't be able to use the apps you mentioned but we may be able to narrow down the trouble in Safe Mode. If the mobile sites work, that means the trouble may be in a recently downloaded application and you may be able to avoid the reset my uninstalling some of your more recently installed applications. If it's still giving you trouble, the reset http://vz.to/18wzOCi is the next best step.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Final Cut Pro X witch Blu-ray Burner are you using ...

    Using a Mac Pro Tower like the Mac Pro 2012 or similar what are the Blu-ray Internal Burners do you use ; LG or Pioneer , witch Model Number.
    Creating Blu-ray on the Mac is fantastic but witch brand and model numbers for the Big Mac Pro Tower are you using with exellent results now.
    On the Mac Apple Pro Apps or Roxio Toast Titanium are the only left options who are current and updated , but burners specified for Windows.
    Frustration come when you talk to Apple they say not supported , Burners makers LG or Pioneer will say we dont offer support on the Mac.
    Well if you can create Blu-ray on the Mac but cant get any help to burn it it is very frustrating and Not So Pro if Apple care for the Pro Users.

    I use the new Mac Pro 2013. Final Cut Pro X version 10.1.4 and Maverick OS 10.9.5. An external Blu-ray burner LG BE14NU40. I've use single burn Blu-ray discs from brands like Maxell and Verbatim. That works fine. I have double layers Blu-ray discs not tried. I use it for home video’s.
    DVD single works fine too. DVD double layers I have not tried but will also work i think. Reviews on LG USA stated that Roxio Titanium with corresponding plugin works.
    I'm glad I found a blu-ray burner that works with FCPX.  Compressor 4.1.3 but I have not been working with the LG burner. Not yet!

  • What are you using as a Flash replacement for 64-bit machines?

    Hi,
    I was reading about the vulnerabilities in Adobe's Flash and decided to remove the offending package. I opened Chromium to make sure my Flash still worked, as I understood that Chromium implemented another method for rendering Flash stuff. I was wrong. For example, YouTube tells me that I need Flash 10 or higher. I tried to re-install the flashplugin package, but it is no longer in the repos.
    I can live without Flash content, but it's nice to have.
    So the question is, what are you using instead, that can be installed from the main repos?
    Many thanks,
    Chris.

    I have installed both lightspark 0.4.3 and gnash 0.8.8, since lightspark should be able to 'fall back to gnash for older videos' (see changelog of lightspark).
    I have tried some flash-websites in firefox and all of them seem to use gnash and there was 1 website that didn't load the content (www.deredactie.be - our national tvstation). So, I'm under the impression that lightspark is not used by firefox.
    Has anyone found out how to do this?
    Secondly, gnash should be able to use VA-API (hardware acceleration). Is it just a question to install libva and let gnash do the rest, or does one have to recompile gnash to build the support in?
    Zl.
    PS: to whoever thinks flashplugin is the 'real flash': gnash has beaten it in terms of providing hardware acceleration. hooray for opensource!

  • Are you using the new features?

    Some of you were very loud about getting certain features for PlayStation 4 and some even complained that they weren't available on day day1.
    You asked for suspend/resume, a media player, dlna, the ability to pause downloads and you got it.
    So are you using these new features?

    Suspend and resume... for endurance racing modes on PJ Cars...Theres no save race status, kill the game lose the hole  1 hour 30mins race... sleep mode is on so if you pause the game the PS4 powers down and saves the game status.... Tested DLNA don't need it allready used plex VIA web browser then the transcoding PS3 and PS4 app...Pause and cancel down loads used.  Music player use for PJ cars... As people stated if you Do not Use any thing then they vanish from the dynamic menu on PS4...Most are not even on the console untill a User hits the down load option... (technicaly you could use the youtube app to watch this...)   

  • Are you using the MathScript Node in LabVIEW or the MathScript Interactive Window?

    Are you using the MathScript Node in LabVIEW or the MathScript Interactive Window? I am very excited with the MathScript Node inside LabVIEW. However, I would like to see what other people think.
    Avalim

    Avalim,
    Personally, I am determining that I like to use the MathScript Node in LabVIEW.  It makes it easier for me to pass my data in and out of the LabVIEW environment!!  But, like you, I am excited to see what any other users think!!
    -Jeff P
    Jeffrey P.
    LabVIEW Product Management
    National Instruments

  • Are you using WebServices ?

    Hi Community !!
    Just few question, are you using WebServices as Data Services ?
    if so are those WS internal or taken from Internet ?
    if taken from Internet ...what do you think to create a Wiki Section with public and WS examples....
    Discussion is wide open
    Regards, Luis

    Hi Marcel & Benni!
    That's exactly the idea of this discussion, to share the information we have about WS as dataservices...
    In a demo i used a public WS to show a Dilbert image, i took the WS from the examples listed on <a href="http://www.esynaps.com/eSynaps_home.aspx">eSynaps</a> and works great!
    But, we want to know if there are others than use WS internally or from publics api's and to share their experience here ..... or in the Wiki section of course
    Looking forwards for more comments
    Regards, Luis

  • Which tools are you using?

    which tool are you using for modelling oracle objects?

    thanks, but is it possible to create (to the databse) both attributes and methods of oracle objects with sybase power designer or just attributes as a table?

  • Limit Preview Size. Which setting are you using?

    I'm not exactly sure how the Limit Preview Size preference affects my workflow. Which setting are you using, and why?
    My preference is currently set to the v2.0 default 1/2 Size. My iMac's resolution is 1680x1050, and I'm using the Canon EOS 1D Mark III taking full size RAW images at 3888x2592.
    regards,
    Gregory

    Gregory,
    I use the default (which is 1/2 size) with no ill effects. Previews are used by external programs to gain access to photos in your Aperture library. (This is not the way your external editor works, though.) Your preview size will not affect your workflow. When previews are turned on, Aperture works on generating previews when you have something new of which to make a preview. I seriously doubt that making a small copy, versus making a smaller copy, would affect how long it takes Aperture (and therefore, how sluggish Aperture might appear.) The difference between making previews and not making previews can be significant.
    nathan

  • General Forum Question: What Contact Synch Method Are You Using?

    This is a question directed towards all forums members using SynchManager to synchronize B2B customers between Web Tools and SAP Business One.
    Of the four possible methods listed below:
    - WebTools UserID Field
    - Email Address
    - BusinessOne InternalCode
    - Seek and Choose
    Which one are you using to synchronize your data?
    We're trying to decide between Email Address, BusinessOne InternalCode, and Seek and Choose.

    Hi Micheal,
    I can not tell you what people are using, but the pros and cons are as follows:
    Webtools UserID (the exposed field on the BP contact)
    This is the best option if you are willing to do the work of setting this property for all of you users in a meaningful way.
    Pros:  Allows you assign a meaningful login name for users of the website
    Cons:  You have to assign he userids (a lot of work if you have 10s of thousands of contacts)
    EmailAddress
    Pros:  hopefully, everyone knows their email address.  So this is a meaningful login name.
    Cons: B1 does not require email address, so the user will probably end up with an OCPR ID if they don't have an email address.
    B1 internal code
    Pros:  it always works
    Cons: no wants to be a number.  Your login name will be "1234", password = "whydoIhavesuchahorriblelogin"
    Seek and Choose
    I consider this the best option, unless you have a better algorithm to populate NPUserID than described below (let me know if you do )
    The seek and choose routine works as follows:
    1.  if they have an NPUserID, user that
    2.  if they have an email address, user that
    3.  use the B1 internal code
    Pros:  User will have the best possible login name. 
    Cons: You do not know which option the user ended up with
    One last note:
    v630 (p10--or whatever we are calling it these days), has added a login name to the Webtools user.  This addresses the glaring problem of not being able to change login name.  Now the user can change their own login.  (why did this take 5 years?).  Hopefully, this will make this decision less daunting.

Maybe you are looking for