Are ZCI interactive forms available via Web Dynpro for ABAP?

Note 955795 talks about ZCI forms available via Web Dynpro for Java. Is this kind of forms also available via Web Dynpro for ABAP?.
Do ZCI interactive forms work via Web Dynpro for ABAP without the need of ACF?
If available, which support package levels are required?
Regards

Hi Mahamed,
I got your problem. You have not done anything wrong.
It is WebAS version which is not supported for this functionality.
But there is solution to this problem
Please refer to the SAP Note number - 1055738.
I think you will get the answer and the scenario described there will match your requirement.
This is a know issues with WebDypro ABAP but this works fine for Java Web Dynpro.
I have also tried for 2 months but finally came to know about it.
Regards
Satya

Similar Messages

How to debug Adobe form attached to Web Dynpro for ABAP

Hi,
My developer has created an adobe form and rendered inside a Web Dynpro page in the SAP Portal. It communicates with the Web Dynpro framework in the backend SAP system (Web Dynpro for ABAP).
My question is, how would I know what infotype access this form requires, in the form of backend authorization role? Is there any way (not trace, ST01) to debug Abobe form on Portal or in backend SAP system?
Thanks,
Karan.

Julius Bussche wrote:
> I am not sure whether this will work in this case, but principally if your trace is recording a * value for a field in an authorization check, then it must be defined somewhere, and there is an option in the trace file to jump from the check to the source code location where it occurred.
Yes, that's possible since the trace also records the information on the ABAP source code location where the AUTHORITY-CHECK statement (or other ABAP statements which internally trigger authorization checks) is executed. If I'm not wrong then there is a button (in ST05) which allows a direct source code navigation. Alternatively you might just click on the ABAP source code information displayed in the ST05 trace results (for recorded authorization checks).
Cheers, Wolfgang

Urg : adobe interactive form creation using Web dynpro with ABAP

Hi Floks,
Thank you For Your support and view my Quires.
I need helpful answer Regarding this Question . I need to Create custom ADobe interactive Form with WEB dynpro ABAP .Could please help out and give me what are the step can i followed here (Ex) .
Good rewards for best Answers.
Thank You,
Suresh Duvvuri

please check this link:-
step by step it is explained
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/c766e918-0b01-0010-99b1-c2b78cd059b3
All the best,
Mahesh.gattu

HCM Processes & Forms : Migrating from JSPs to Web Dynpro for ABAP

We are pretty well invested in HCM Processes and Forms. We currently use JSP based forms as the UI for our notifications. We do not, use Adobe Forms.
For a number of reasons, we want to transition to forms based in Web Dynpro for ABAP.
We want to bring a new scenario online using WD4A. Down the road, weu2019ll very likely transition our old JSPs over to the new methodology as well.
I would expect that this is pretty well doable. As part of a proof of concept, we did launch notifications from the web dynpro environment, had them initiate workflow, etc . Weu2019ve also pulled up our web dynpro app from the UWL and portal.
Has anyone gone through this specific exercise u2013 moving from JSPs to WD4A? We are particularly interested in where the integration points will be, working with ISR_PROCESS_EVENT, etc.
Your comments, suggestions, references, etc. are welcomed, as well as any discussion you may offer.
Thanksu2026
...Mike

And along the same lines, any thoughts around which of the following QISRDPROCESS_TYPEs might be a better choice?
Entry Using ITS Service
Entry Using Adobe PDF
We currently use the ITS Service type. I think this may be our first direction, replacing url links with links to our webdynpro application which woulds need to integrate calls through ISR_PROCESS_EVENT
The Adobe Type seems interesting - Again, we do not, nor will, have Adobe Forms in place for this development. But, I've read some discussion that folks have enhanced out of actual Adobe Form rendering.
Again, the thoughts of the community are welcomed here.
Thanks...
...Mike

Integrating Web Dynpro for ABAP into ABAP Workflow

We have a requirement to create a User Interface via Web Dynpro for ABAP, and use that information to start off a workflow, transferring the data from the Web Dynpro application into the container of the Workflow.
Also later in the workflow, we would like an approval step to invoke a Web Dynpro that displayes the data, and an approve/reject button to be pressed that feeds that data back to the Workflow.
Has anybody done this, or does anybody know how to do this? We do not have the possibilities to use CAF in this project yet.
Kind Regards,
Tony.

Hi,
This is of course possible. Starting the workflow with Web Dynpro or from classic ABAP dynpro doesn't really differ. Just build your web dynpro as you would build a transaction, and from the submitting/execution phase, you just launch the workflow. Launching the workflow can be done with couple of different techniques (=function modules) and it has been discussed many times here.
Also the approval part shouldn't cause any problems. Just build an application which takes as a parameter for example the work item ID (or any other relevant parameter that you can imagine, which you can use to retrieve the needed data that you want to display). Then from the web dynpro application you can call for example a function module, which can complete the work item. Or another option is that you will raise an event (again with a function module), which your approval task is waiting for.
Once again, it isn't really that different from classic dynpro (or any other technique) - the same approaches can be utilized.
Regards,
Karri

Offline Interactive Forms (Web Dynpro for ABAP)

Hi Everyone.
Please help me!!!
Upload Offline PDF file to xstring context attribute by file upload in Web Dynpro parts.
Set Offline PDF file uploaded via xstring context attribute in 'pdfSource' property of interactive form.
I wish to view Offline PDF file and get data to context in 'dataSource' property of interactive form.
Below restriction.
- Web Dynpro for ABAP
- Offline Interactive Forms
- Zero Client Installation
- ABAP Dictionary-Based Interface
NetWeaver 7.0 (NW 7.0) SPS16

Hi Daisuke,
As per your requirement, to get done your work you need to create two Adobe Forms , one is for Offline Interactive Form and other is Online Interactive Form.
In offline Interactive you design your form and define the Layout type as zci layout and Abap Dictionary Based interface. And by executing the form you can save the form to your desktop.
Now in online Interactive Form you create the context similar to the one which has been created in the Offline Interactive Form. Now in one view you define the file upload functionality and in other view you define the adobe interactive form, for this the interface is automatically as it asks for the context and its of type XML based interface, also do maintain the context variable something like "PDFDATASTRING" with type XSTRING in the Component Controller and now in adobe view you give the property pdfstring as "PDFDATASTRING" and dont forget to provide the navigation of these two view, and set the File Upload View as default view.
The above functionality can help you in some way or the other.
Regards
Pradeep Goli

Part II: Adobe Print Forms with Web Dynpro for ABAP. -Practice issue

Hi,
I am practicing Thomas jung Tutorial on Adobe forms [Part II: Adobe Print Forms with Web Dynpro for ABAP|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/a3e2f018-0b01-0010-c7a8-89deb6e63e97].
I am trying to complete this and looks like this tutorial in not complete.Anybody can help me in completing this until we get a preview of adobe form?
FYI.. Ic ompleted evevrything in tutorial and I am waiting to complete and test.
Rgds
Vara

Thomas,
Here is where I am stuck.
Wrote this code in ONACTIONSEARCH.I am getting my entries in internal table ISFLIGHT.
but unable to bind it to adobe form and show in the form.
* SELECT statement
 clear isflight. refresh isflight.
 select * into corresponding fields of table isflight from sflight
 where carrid = ls_data_selections.
* navigate from <CONTEXT> to <ADOBE_DATA> via lead selection
lo_nd_adobe_data = wd_context->get_child_node( name = wd_this->wdctx_adobe_data ).
* navigate from <ADOBE_DATA> to <SFLIGHT> via lead selection
lo_nd_sflight = lo_nd_adobe_data->get_child_node( name = wd_this->wdctx_sflight ).
lo_nd_sflight->bind_table( new_items = isflight set_initial_elements = abap_true ).
Error is Access via 'NULL' object reference not possible.
FYI.. I just dragged and dropped 2 elements from DATA to Adobe form.what are the other changes do i need to do in form gui elements so that it shows the internal table contents?
this would really help me..
Rgds
vara
Edited by: Vara K on Jan 21, 2009 5:51 PM

Web Dynpro for ABAP functionaility for HCM Proceseses & Forms in EhP4

Dear Gurus,
I read in one of the threads that HCM Processes & Forms are now Web Dynpro for ABAP based from EhP4 onwards. Can sameone provide me with any SAP link which corroborates this? Thanks.
Regards,
sameer Kadam

Hi Divya,
Thank you for your reply. I do have an S user id. However, the document that you specified is not readily accessible. Apparently, one needs to buy it online. Isn't there any other such related documentation- which is freely accessible?
Thanks & regards,
Sameer Kadam

Web Dynpro for ABAP Adobe Forms

We have created a table with fields.
How can we create a Web Dynpro for ABAP applicaton to populate these fields into an Adobe Form?

hi,
Refer this: /people/bhawanidutt.dabral/blog/2007/11/15/how-to133-integrate-adobe-form-on-webdynpro-for-abap-and-deploy-it-on-portal
If you have created Fields or Table in Adobe form then you can populate those fields in Adobe form.
When you give the name of Adobe form in the Template Source Property of Interactive UI then screen will pop up asking to make contexts for the fields in adobe form.
If you click on yes, then you will have automatically created context corresponding to Fields or Table in your WD application.
Write the suitable logic to populate the Contexts in Wd Do init or using supply funciton
This way your Adobe form will be populated with values.
I hope it helps.
Thanx.
Saurav.

Close OVS Help via Button in Web Dynpro for ABAP

Hello!
Is it possible to use a close-button in a "ovs help popup"? I tried to fire a "Type-Exit Outbound-Plug" of window controller of the "ovs help window" but it didn't work.
Thanks for help
Joerg

Hello Joerg,
in Web Dynpro for ABAP there is currently no possibility to subscribe to the close event of the OVS popup.
Regards, Ariane.

Web Dynpro For ABAP Question

Hi all,
I'm creating Adobe Interactive forms in Web Dynpro for ABAP.
Problem:
Context defined in the created "View" is not displayed in the 'templates' (Adobe Interactive Form in the "Data View" tab.
I'm following the exact steps used in the following e-learning class:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/c766e918-0b01-0010-99b1-c2b78cd059b3
Except I'm creating 'string' fields instead of numeric fields like in the above e-learning class and creating my forms in Adobe Livecycle designer first then importing them to the web dynpro for abap - 'templates'.
The 1st form I created went well and works fine.
Question:
For my second and third form I'm unable to map my context fields they are not displayed in the "Data View" anyone know why this is not possible?
Cheers,
Dharm

Hello,
are you creating the form via forward navigation from webdynpro abap?
When you do that the context of the form should be created automaticaly.
What Basis SP level are you using?
Best regards,
Dezso

Using Native SQL in Web Dynpro for ABAP

Hi folks,
I am trying to access an oracle database in web dynpro for ABAP via Native SQL.
I am able to read row by row from the database into a work area, but I am unable to read the whole table from the database into an internal table.
Please advise as to how I can do this, and thanks for reading.
PS: Thomas, I wasn't off-topic on the previous thread; I forgot to mention that I was trying to do this under Web Dynpro for ABAP.

Hello,
it doesn't matter if you try this with Web Dynpro ABAP, BSP or any other framework, this is a general ABAP question and not related to this forum.
Regards,
Rainer

Web Dynpro for ABAP Documentation

Hi Guys,
Basically Iam an ABAP consultant. Now I have to start working on ABAP WEB DYNPRO.
Could some one suggest me the best Document to start with or if any one has one available Could you pls pls share it with me. My email ID is [email protected]
I promise that I will definitely award points.
Thank You,
Gajendra.

Hi Gajendra,
Welcome to Web Dynpro ABAP !
In web dynpro ABAP we follow MVC(Model View Controller) architecture.
In this object oriented ABAP is used to provide background functionality. Here, your ABAP skills can be utilized to the fullest. Programming in web dynpro ABAP is different than conventional ABAP programming. Here we strictly follow MVC architecture in terms of controller interface. Also there are many wizards available so that we can directly pick the code from wizards.
e.g We can call BAPI through a service call in web dynpro application. Thus automatically backgroud code for BAPI execution will be generated.
To start with Web dynpro ABAP you can try following tutorial:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
You can start with tutorials and all. There are around six tutorials in SDN library.
Web Dynpro for ABAP
http://help.sap.com/saphelp_erp2005/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/frameset.htm
best tutorials in wbdynpro for ABAP to start with :
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
Cheers,
Darshna.

Web Dynpro for ABAP @ SDN Wiki

Dear users and developers of Web Dynpro for ABAP!
I'd like to invite you to Web Dynpro page in SDN Wiki launched recently.
<a href="https://wiki.sdn.sap.com/wiki/display/WDABAP">Wiki page for Web Dynpro ABAP</a>
It's really great place for all WD Forum FAQ, HowTo and other frequently referenced materials, useful links, tips, hints etc.
Never again bother with answering the same question twice - put it the Wiki!
I'd like to thank SAP Network team who finally came up with this great tool for knowledge transfer!
Regards,
Serguei

premkumarwow wrote:
Hello,
>
> I am new to webdynpro and am sorry if i am re-posting the same question or if asking a basic question. I did go through the link Web Dynpro for ABAP @ SDN Wiki and am atleast confident of how to start a development .
>
> I have couple of queries. We are implementing webdynpro first time for our client. The client want to know if :
> 1. The user must log in to SAP each time to view the output
> 2. Or can they view the output via browser without having to login to SAP at all,
>
> After going through few posts, am aware that output can be viewed via browser but the client says none of their users will type in user id and password while logging in ( Meaning it will be an automatic login).
>
> Can they view the output in a browser without opening SAP and can it be set so that they do not type in User id and password( I am not aware how but currently for logggin into SAP, they do not have to type in their id information).
>
> Your replies will be of great help to start with.
>
> Regards,
> Prem
Adding to what sanasrinivas wrote above...user will have to login the again if your application opens in a GUI interface and from that GUI screen you are opening some report in Browser.
Remember that T-codes made for wda can execute both in GUI and Browser, If you execute them in Browser you wont have to login again and again but yes, if you execute 1 application in GUI and open some other t-code in browser , you will have to enter the login details again...so if you want to have hassle free execution you will have to open the reports in browser always.
regards,
Sahai.S

Floor Plan Manager Technique in Web Dynpro for ABAP

Hi Experts,
Road map technique and Floor Plan Manager Technique, both are same or different.
I need to develop a web dynpro application based on Floor Plan Manager Technique. can I develop this application in WebDynpro for ABAP. If so please help me how to use Floor Plan Manager Technique in Web Dynpro for ABAP.
I don't have knowledge in java, so i cann't develop this application in web dypro for java.
Please help me.
Thanks & Regards
Sridhar

>Road map technique and Floor Plan Manager Technique, both are same or different.
They are different. The FloorPlan Manager is a tool for constructing WD applications with a similar layout and user interface. There are two different floor plans currently - the OIF - Object Instance Floorplan and the GAF - Guided Activity Floorplan. The OIF is for the editing of a single business object. It allows for things like the nesting of header and item details. The GAF, on the other hand, uses a road map to walk you through an activity - much like a Guided Procedure. The FloorPlan Manager is very powerful because it can be configured using component and application configuration - allowing you to plug in different UI Building Blocks (UIBB) as Web Dynpro Components or Views. You can change the roadmap, for instance, adding a new step by just chaning this configuration and not having to touch the code. Consistency between applications is also a major stregth of the FloorPlan Manager.
The Road Map is just a UI element in WD. It can be used to create your own custom applications.
>can I develop this application in WebDynpro for ABAP
Sure. The Floorplan manager has been available for WDA since SPS13. Have a look at the packages APB_FPM_DEMO and ABP_FPM_TEST for examples of how to build components designed for the FloorPlan Manager.
Admittedly there aren't a whole lot of documents available on the subject yet. Some eLearning is being worked on now. There are going to be some workshops at TechEd on the subject:
https://wiki.sdn.sap.com/wiki/display/Community/BringitallTogetherwithFPM%28FloorplanManager%29forWebDynpro+ABAP
The best thing to do right now is to study the demo applications SAP provides.

Are ZCI interactive forms available via Web Dynpro for ABAP?

Similar Messages

Maybe you are looking for