ARE1 Error ''000005/2009 Excise Invoice is not meant for Export"
I am working on ECC6 version of sap i am trying to create the ARE1 but it give the error as '0000500001/2007 excise
invoice is not meant for export'.I am trying to debug the program i thing the sy-msg type it catch that is e thats y it
goes to other loop pls help me out .
Dear Sarthak,
I have already maintained the number range object earlier, Still i verified it and number range object is present.
The error is not due to this Number range object.
The error is still there, Pls help.
Regads,
Arunava Sahana
Similar Messages
-
Excise invoice is not meant for exports. Message no. 4F242
Hi All
As per my Client Requirement i need to do export sales from specific Plant(Depot). which is used for only export sales.
i created STO and then i did Delivery and Billing (JEX) and created Excise invoice with refrence to Billing Doc
while Creating ARE - 1 document through T.Code J1IA101 it thronging ERROR
0020000023/2008 excise invoice is not meant for exports
Please give me u r suggestions
Thanks in Advance
MadhuDear Madhu,
As per your thread system is telling that invoice is not relevant for the exports so,
Please check the Excise invoice which you created is it relevant for expotrs or relevant for STO billing i.e domestic.
I hope it will help you,
Regards,
Murali. -
0000000003/2007 excise invoice is not meant for exports.
WHEN IAM CREAING ARE 1 IA M GETTING THIS ERROR
0000000003/2007 excise invoice is not meant for exports.
Message no. 4F242Hi murali,
Do you got any solution to your problem
if you got kindly inform me
cheers
bvdv -
ARE1 creation error - "excise Invoice is not meant for Exports"
Hello Experts
We are working on ECC 6.0.
We were so far dealing with domestic sales and now have to start with exports (ARE1)
I've gone through many threads and all major configuration has been done according to J91 Block Builder. But I still have doubts.
1. While doing billing for export sales, when should excise invoice be generated. When generated then should it posted with accounting entry?
2. We've created a Running Bond & on test basis we have done billing and excise invoice (DLFC) has been generated along with billing.
But when we try to create ARE1 (J1IA101) with reference to above Official excise invoice, we get the message 4F242 ( 00090006 / 2008 excise invoice is not meant for exports). We've noticed in table J_1IEXCHDR for the above excise 90006 that the field Export Type is blank which should otherwise be B (Export under Bond). We have updated manually in the table as B to test and we are able to move ahead.
3. If we dont generate the excise with billing and try to do it in J1IIN, under utilisation even after changing the type from Local to Export only DEEMED Exports is highlighted in blue and could not be turned to BOND type.
Please suggest.
KapilDear Kapil
when should excise invoice be generated
Once you generate delivery related (document type F8) proforma or commercial invoice, you should generate excise invoice
When generated then should it posted with accounting entry?
No excise entries should not be posted to accounting for export sales
excise invoice is not meant for exports
First ensure that you have a separate series group for exports.
Next in case of your Excise Invoice Type dont have any of the following, then system will throw that error
- Deemed export
- Export under bond
- Export without bond
- Export under Letter of Undertaking
Check whether the excise invoice type is generated with any of the above
thanks
G. Lakshmipathi -
"Excise Invoice is not meant for Exports".
Dear All,
I am facing a problem while creating ARE1 for Export Sales.
At the time of creation (Tcode - J1IA101), when i am giving the outgoing excise invoice number, in the given field, system is saying that "Excise Invoice is not meant for Exports".
Whereas I have maintained seperate Series Group for Domestic as well as Exports.I have checked No.ranges as well, where I have found that, the Outgoing Excise invoice number is also maintained in the Number range Objects for Exports.
Can anybody suggest how to resolve the issue.
Rgds,
Indrajit1.Check the Series Group is Maintained for Domestic and Exports
2. Maintain the number range in T.Code SNUM - Object "J_1IEXCEXP"
3.Ensure that the excise invoice number you referred is created for an export billing document.
4.Then go to J1IIN, check on the utilisation screen whether invoice type has been changed from Local to the respective export excise invoice.
5. Maintain the Bond with T.code J1IBN01 respective Plant and the Value with from to date
6. Cretae the ARE 1 through T.code J11A101 check the Excise Invoice No and the Amount
7. Check the Excise duty(BED) , E cess and Hr Edu Cess value is apperaing if not you have apply the Snote .
thanks
MJP Michael Joseph -
0000000005/2007 excise invoice is not meant for exports.
customer fron Switzerland
plz argnt..........Dear Murali
What exactly your question?? Unless you people be specific and clear in your questions, you wont get proper answer.
Regards
G. Lakshmipathi -
Excise Invoice is not posted for Part II
Hi,
During Excise Invoice Posting J1IEX_P the message--> Tax code V8 in procedure TAXINN is invalid
the message comes Tax code V8 is not defined for Tax procedure TAXINN , Where as so far we have not created tax code V8, and it is not there in the drop down list in FTXP & in PO Invoice tab tax code.
(Note --> I would like to inform you that the same message (V8 in procedure.......) was coming in the MIGO and giving the dump , before JMX1 Conditions were maintained, after maintaining the JMX1 , the message was not coming and material document saved with capture excise invoice.)
Awaiting reply & comments on this message.
Thanking you,
Manish GuptaCheck these two threads
[Re: ARE1 creation error - "excise Invoice is not meant for Exports|ARE1 creation error - "excise Invoice is not meant for Exports"]
[Re: ARE1 Error ''000005/2009 Excise Invoice is not meant for Export|Re: ARE1 Error ''000005/2009 Excise Invoice is not meant for Export"]
thanks
G. Lakshmipathi -
Excise invoice does not excist
Dear SAP Gurus,
While depot to depot stock transfer process @ the time for MIGO error came that EXcise invoice does not excist for suppying plant.Is we miss any configuration.
With Regards
Mukul Kumarif you are trying to enter the excise invoice number created in the sending plant using J1is, if you dont enter the leading zeros system may not recognize the invoice
-
Excise modvat accounts not defined for DLFC transaction and excise group
Dear Experts,
Iam raising this question after checking all the contents related to Sub Transaction type in SDN.
My prob is: for raw material sales scenario i have created order delivery and invoice. For Invoice i have done account determination with a different G/L in VKOA. Now i have to create an excise invoice and the accounting entry for central ED on sales should go to different G/L account. for account determination i have done the following settings:
Maintained Sub transaction type in
IMG -> Logistics - General -> Tax on Goods movement -> India -> Basic Settings
->Maintain Sub Transaction types
IMG -> Logistics - General -> Tax on Goods movement -> India ->
Account determination -> Specify Excise Accounts per Excise Transaction.
Here against DLFC sub transaction Type is maintained..
Also
IMG -> Logistics - General -> Tax on Goods movement -> India -> Account determination -> Specify G/L Accounts per Excise Transaction
Here maintained Excise group with DLFC Company Code subtransaction type, chart of accounts and all required GL Account .
But when the iam creating Excise Invoice in J1IIN and clicking on Subtransaction type-F4, no entries are shown. No values found is the message in green. Message no. DH801
If i use subtransaction type and enter billing document and enter, the following error message comes:
"Excise modvat accounts not defined for DLFC transaction and excise group"
Iam unable to understand why the subtransaction type maintained is not showing in TCODE J1IIN?
RegardsFor the error message DH801, please check note 840911
Excise modvat accounts not defined for
DLFC transaction and excise group"
Please check your G/L assignments "Specify G/L Accounts per Excise Transaction"
thanks
G. Lakshmipathi -
Excise Invoice cannot be captured for RG1(Finished Goods) material
Dear Friends,
While creating GR and choosing the option only capture Excise Invoice system showing error as follows:
Excise Invoice cannot be captured for RG1(Finished Goods) material
Message no. 4F276
The Material is a Raw Material(ROH) and Price control is "V".Pl tell me and earlier 3 times GR is done on this material w/o error.
Pl help me how to get rid of this error.
Regards,
AskIn GR check in Excise item tab under excise item whether it is showing Raw Material or Finished goods?
Simulteneously check in J1ID for the said material & chapter-id combination what material type has been maintained?
Regards,
Indranil -
ARE 1 update error excise modvat account not defined for ARE 1
Hello Expert,
Iu2019m trying to update ARE 1 Document in export scenario, but it shows error -
Excise modvat accounts not defined for ARE1 transaction and K5 excise group
Message no. 8I402
Iu2019ve gone thru Specify G/L Accounts per Excise Transaction in CIN. But exactly in which field we need to maintain the GL.
thanks
GKumarHI,
You are not giving correct Excise inovice no. in J1IH transaction for cancelling. Because if correct excise invoice number is not given then also system give the same error. So please check the excise invoice number carefully
Please check SPRO => Logistic General => Taxes on Goods movement => India => Outgoing Documents => Specify Default Excise Group and Series Group, whether you have assigned the related G/L Account for the given combination with Excise Invoice Type
You will Check following G/L are maintained or not in "Specify G/L account per excise Transaction"
maintain GL account for ETT ARE1 in table J_1IEXCACC for field Mod.Clearing field name is J_1ICLEAR
Cenvat Suspanse G/L
RG23A BED
RG23A ECS
RG23A AT1
Also Check following under "Specify Excise account per excise Transaction"
CEIV CR Credit MSUSP CENVAT suspense account
CEIV DR Debit PLAAED PLA AED account
CEIV DR Debit PLAAT1 PLA AT1 Account
CEIV DR Debit PLABED PLA BED account
CEIV DR Debit PLAECS PLA ECS Account
CEIV DR Debit PLASED PLA SED account
CEIV DR Debit RG23AED RG 23 AED account
CEIV DR Debit RG23AT1 RG 23 AT1 Account
CEIV DR Debit RG23BED RG 23 BED account
CEIV DR Debit RG23ECS RG 23 ECS Account
CEIV DR Debit RG23SED RG 23 SED account
Thanks,
Raviteja
Edited by: Ravi Teja.T on Feb 2, 2012 9:55 AM -
Excise invoice is not saving and not showing datas
in erxcise invoice i ve made settings as per the sap best practices then also the excise invoice is not saved and not generated also
please help me to solve the problem
the error is coming like this
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
i ve already maintainthe number range for this object in tool in tax in goods moment
please give some better advice for the excise invoice setting.Sub Transaction type determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Sub transaction type is also used for determining the accounts while
doing excise removals.
Within CIN the account determination is based on the transaction type.
So normally you can have a single set of accounts for Excise
utilization. In case you need alternate account determination for
handling various scenarios you can define sub transaction types. The
sub transaction types and corresponding account assignments needs to be
maintained in CIN customization
To make customization of Sub Transaction type, goto
<b>SPRO --> Logistics General --> Tax on Goods Movements --> India --> Account Determination and check whether you have assigned second and third one, viz. "Specify Excise Accounts per Excise Transaction and Specify GL Accounts per Excise Transaction".</b>
Check
<b>Taxes on goods mvnt--indiaaccnt determination---specify excise accnts for excise transaction...maintain the sub transction type , ip or 01,
against the appropriate ETT</b>
Message was edited by:
sam masker -
Error : Excise modvat accounts not defined for GRPO transaction and U1 exci
I have Created Impot PO, After Planned Delivery cost MIRO I am trying to Perform GR then its giving Error "Excise modvat accounts not defined for GRPO transaction and U1 excise group
Message no. 8I402"
I have already maintained GL account in "Specify G/L Accounts per Excise Transaction" for Excise group U1
This problem is coming when Additional Duty on custom condition type JADC is maintained in "Maintain Excise Defaults" node in the column "ADC Cond" . If I remove JADC condition type from this place the this error is not coming but AED column is not fetching any value while doing GR.
Please help me in this issue , still No answer
Edited by: shiwanshu singh on Jan 28, 2009 10:26 AMDear sir
For GRPO have you maintained sub transaction Type IP for your excise group U1. If you not maintained pl maintain . and assign G/L account to modvat clearing account , the G/l account should be same as company code CVD account.
Regards
jrp -
Excise Invoice can not be capture for RG1 in STO
Hi All,
I created a Purchase order for STO with the help of STO I created Replenishment delivery then JEX Invoice then Excise Invoice. At the time of MIGO I put the Excise invoice no. for capturing the excise duty. now when i am saving the MIGO system generating an error " Excise Invoice can not capture the RG1"
Please throw your valuable suggestion.
Regards
Shambhu SarkarHi ,
I am sure u r doing MIRO w.r.t PO after u have done MIGO of that document...
Check that how many line items u have in MIGO and wether it is coming it MIRO or not...
I would also suggest pl look into the MAP and Standard price in accounting view of material.
Reply.
Dipak -
Excise invoice does not exist in supplying plant
Dear all,
We are having a scenario where in we are doing stock transfer from one plant to other the system gives an error message that the excise invoice does not exist in supplying plant.
Created a PO for stock transfer, posted GI against it, created excise invoice in J1IS with transaction type other. We are having separate excise registeration for the two plants.
Secondly request to kinldy let me know what account enteries should be generated when we post excise invoice for the supplying plant.
Regards,
mahesh.Hi,
In case of STO process using SD the process flow is like
1. Create a PR against the supplying Plant (ME51N)
2. Create a STO (PO) with ref to the PR (ME21N)
3. Create a Outbound Delivery with ref to the STO. (VL10B/VL10D)
4. Create a Proforma Inv (VF01) No Acc docs gets generated.
5. Create a Excise Inv for the supplying Plant (J1IIN) Accounting Doc gets Generated.
The Accounting Entries at the time of Excise Inv creation for the supplying Plant is:
Excise Duty Expenses on Sale Dr
Excise Duty Payable Cr
Sec.& Higher Edu Cess Payable on Excise Cr
Edu .Cess Payable on Excise Cr
At the time of Goods Receipt at plant
1.Good Receipt at Receiving Plant (MIGO) - No Accounting docs get generated only Qty update takesplace.
2. Capture & post the excise @ the Receiving Plant during MIGO by entering the Supplying Plant excise inv as reference.
Hope it is Clear.
Revert incase of any queries.
Regards,
Maybe you are looking for
-
Unable to chat "because user failed to respond"
I and my family are having trouble using iChat AV for video chat. The problem also affects audio chat. Essentially, when person A invites person B to chat, and person B accepts, there is a delay with the spinning indicator (which always pauses moment
-
Date Category Rank by Date Rank by Category RANKING 01/01/2010 A 1 1 1 05/02/2010 A 2 2 1 18/02/2010 A 3 3 1 30/06/2010 A 4 4 1 12
-
Transferring documents from Works to Word using Adobe
I have several documents in a Microsoft works program that I would like to convert to Word. How do I do this. Thanks
-
hello. i forgot my restriction passcode. i havn't back up so i can restore. i want to reset my iPhone4 as new.. please help me.. please???
-
Hi, i wrote a normal rendering methode but i want to change it to Immediate-Mode Rendering which is in Java3D can anyone help me and tell me how to do that? here is my current rendering function that i want to change: public void render( Scene s