Area Chart for More than 4 Groups

Area chart will allow me to add 11 items under Show Values in Chart Expert, but the colors I select for each keep changing. Also can't get items to display in alphabetical order. Any way to do this? I'm running Version 11.5.10.1263.

hello Royal,
can you post a screen shot of your chart as it is now as well as a mock-up of what you'd like it to look like?
-jamie

Similar Messages

Filter per activity for resources who are included in more than one group

Have several resources who participates in 3 Groups (Design, Assembly, and testing) Would like to somehow filter or Group in a Way so a report can be viewed only showing the actual work they are doing för the specific Group. I.e. showing their assembly
work only. etc.
(All assembly tasks has a taskname which includes "assembly"')
Kind regards //Anders

Anders,
I replied earlier but after reading you post several times I realized that I probably misunderstood what you want. This is what I now understand. You have several resources, each of who may work on various parts of design tasks, assembly tasks, and test
tasks. For example, let's say your resources are Joe, Bill & Tom. Joe is assigned to a design and test task, Bill is assigned to an assembly and test test task and Tom is assigned to a design task, an assembly task and a test task (Tom is very versatile).
You would like to see a report showing just the assembly tasks and the amount of work each of the three resources is assigned on those tasks.
Assuming the above is a correct interpretation, you will need to employ three processes, some VBA, grouping and filtering.
1. First, designate a custom text field for group identification (e.g. use Task Text1 to enter "design", "assembly", or "test" for each task)
2. In order to use grouping and filtering effectively, you will need to translate the Task Text1 information to the Assignment Text1 field. To do that, go to the MVP website at: http://project.mvps.org/faqs.htm, and run the macro in FAQ 37.
3. Now go to the Task Usage view and set up a group with Text1 as the first group by element and Name as the second group by element. Check the box to group assignments and not tasks. Then select "assignment" for field type of the second element
(i.e. Name).
4. Apply the group
5. To show only the work hours for each resource in a specific group, autofilter on the desired group. Note, if you do not run the macro to populate the Assignment Text1 field with the Task Text1 field, the filter will yield nothing.
Hope this helps
John

How to close open POs which are open for more than two month

I am new to MM please somebody help me with this
Thank you

there is NO STD SAP program which will help u closing the open PO (more than two months)
you need to go each and every PO and mark it as Del completed (item level in deleivery tab)
but this is only stastestical indicator. System wont stop you creating further GR against such PO if any Qty leftout.
for example - PO order 10EA, you recd 8EA and marked the indicator , still you can make the GR for 2EA
there is SPRO setting as well to mark the PO as delivery completed once PO Qty and MIGO QTy is equal or with some variance . but this will work on real time
Another way to set the final invoice indicator in invoice tab
system will allow you to post the further invoices but all be blocked.
somebody need to go and verify the blocked invoices and take necessary action
This is again a manual activity, there is no such STD setting or T code exist
Another way is you can create a program with the help of abaper
built a logic on date / QTy and Amount and update the PO for del complete ( EKPO-ELIKZ) and final inv indicator (EKPO-EREKZ) by using BAPI PO change
hope this will help you

Creating Scatter chart for more than one column

Hi,
I have 2 columns of sorted numbers, when I select one column at a time and create a Scatter type chart, every thing is OK,
But I want a chart with both columns in it, and when I select both columns and select a Scatter chart, Numbers takes the Group1 column as X axis and Group2 column as Y axis and draws me this chart whiich is not what I want!
When I try this type of chart the chart is something like I want, but not with connected lines.
How can I draw a Scatter chart with 2 columns of data in one chart?
Thanks in advance,
Regards,
Hadi

Thanks Jerrold, The problem was the first column, on the left of Group1. that column should not be as header. I created another table like this and the Share X Values command worked like a charm. I really don't know why!?

Kindly refer to Case Id No. 525700065 in India.I have talked to various people on my case for more than 5 hours ( Total talk time) The people give various different answers and aim really fed up now. What do i do? Many apple phone users are especially fed

Kindly refer to Case Id No. 525700065 in India.I have talked to various people on my case for more than 5 hours ( Total talk time) The people give various different answers and aim really fed up now. What do i do?
Many apple phone users are especially fed up with RSGI Communication , Erandwana, Pune, Maharashtra, India.
Their service report No. 36679.
Allthough Mr Punit ( Technical Dept. Apple.) had requested RSGI to chance the device, still RSGI said they do not have the device ( I phone 5, white ,16GB) in stock.
Today when we contacted them they said they won't be able to replace OR order to Apple unless and until we do not keep the device with them for 3 days.
Mr Deepak of Technical Dept Apple was contacted who's telephonic Transript as proof is available with us.

Who exactly are you addressing your screed to
There are no Apple Staff on this forum ,it is User to User

Lock user ID which are kept idle for more than 30 mints.

Dear All,
My requirement is as follows.I need one batch job to lock all user IDs in producrtion system if the user Id is kept idle for more than 30 mints.
Can you pls let me know how I can do it and under which tables the user Ids are stored and is there any standard program that I can use to fullfill my requirement.
Thanks to all of you for your support.
Rgds,
Babu

Dear,
First suggestion - contact your BASIS team.
Secondly, please check the below:
Logging off the inactive users is not set up by default. Setting up the feature of logging off the users improves the security as unattended terminals do not stay active indefinitely.
To activate automatic logging off, do the following:
Go to Profile Maintenance by choosing Tools --> CCMS --> Configuration --> Profile Maintenance or the transaction RZ11.
Maintain the parameter rdisp/gui_auto_logout. Enter the required number of seconds of inactivity before the user is logged off automatically.
To deactivate automatic logoff, delete the parameter from the profile(s) or set the value '0'.
Regards,
Syed Hussain.

My bookshelf and Facebook icons are stuck in "waiting" apparently updating for more than a week, but I don't remember trying to update them. I tried pressing the home and sleep buttons in as suggested, but problem not fixed

My bookshelf and Facebook icons are stuck in "waiting" apparently updating for more than a week, but I don't remember trying to update them. I tried pressing the home and sleep buttons in as suggested, but problem not fixed

Keep to one discussion only. Go back to this one,
https://discussions.apple.com/message/21087117#21087117

SCCM 2012 Secondary site some client's are scan hardware inventory for more than 30 days

Hi,
In our SCCM 2012 environment we have secondary site configured which connected with 8500 computers, on those 5500 machines scanning hardware inventory and send latest inventory details to Secondary Site Management Point, but remaing 3000 machines are not
sending latest hardware inventory for more than 30 days. I verified clients log found it is generating report on inventory agent.log however it is not available with secondary site Management Point.
Are anyone experienced this issue, please share your thought how to fix this issue.
Thanks in advance.
Madhan

Yes i did verify but the client isn't listed on both log files. Also i couldn't open IIS log because of it size has more than 800MB. currently this site has connected with 8500 machines do you think these many clients are supported by secondary site server.
If you can't open the IIS log then how do you know that the Client's IP is not listed within them?
5000 is the max for a secondary site. You will need to secondary sites at this location.
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigClientNumbers
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 Secondary site client's are not doing hardware scan for more than 30 days

Hi,
On our SCCM environment around 2500 active clients mapped for particular secondary site not performed hardware scan for more than 30 days. Can anyone provide suggestion how to fix this.
Regards,
Madhan

Yes i confirmed it is listing correct MP and software scan is working fine. we have around 8500 machines connected to that site buy only 3000 machines are having this issue. anyone has faced this issue ?
Only 5000 Computers are supported by a secondary site.
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigClientNumbers
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Please , I wonder if I can subscribe for more than one sync accout on the same Desktop? I mean that we are multi-users for the same desktop , so we need some privacy.

I and my brothers and sisters use the same desktop , so we need to subscribe for more than a single sync account , and I don't know how. Thank you

If you each have a separate Windows account then each of you should automatically have a separate Firefox profile.
If you use the same Windows account (not much privacy in that case) then you will have to create a separate profile for each of you and a desktop shortcut to start each profile.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

Line Chart with more than 15 datapoints

I'm using Apex 3.1.
I am trying to create a line chart with more than 15 data points. Apparently 15 is the default. Question is, How do I change the default?
The Wiki has advice for changing the "Maximum Rows" parameter, but "Maximum Rows" is not to be found, either in the chart attributes or series attributes.
http://wiki.shellprompt.net/bin/view/Apex/ChartIssues
I have encountered this limitation with SVG line charts and Flash line and scatter charts. Seems like it must be an easy thing to figure out; I feel embarassed asking such a question. But I've been through all the application property pages, much of the documentation, and several tutorials... Where can I change this? It's driving me nuts!
Thanks
Fred

Hello,
Which version of APEX are you using?
Go to your Flash Chart attributes - get into your series (click the icon) in the section of Series Query you'll find the maximum rows.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Problems to restrict access to a page when the user belong to more than 1 group

I have realized that Dreamweaver on a coldfusion document only works fine when the user only belongs to a single group, this is because the code supplied by dreamweave when you use the option "Restrict access to a page" at "Server behaviors" it assumes that the user only have one group as you can see on this line created automaticly by dreamweaver:
<cfif MM_Username EQ "" OR MM_UserAuthorization EQ "" OR ListFind("admin",MM_UserAuthorization) EQ 0>
MM_UserAutorization has the value of the field assigned for the list of groups or levels, as you can see it could work if we reverse the parameters of the listfind function but the problem would be if we grant the access to more than one group because the sentence would be like this:
<cfif MM_Username EQ "" OR MM_UserAuthorization EQ "" OR ListFind("Admin,Manager",MM_UserAuthorization) EQ 0>
so both paramethers are lists therefore no user will get access to the page.
I am trying to make a work around to fix this problem but I don't know how to get the name of the page since the Application.cfc so I can validate the access to this page against tables on my database.
Does someone have a work around or a tip how to fix this problem?
Thanks in advance.
AG

Seems like you have a problem with your group names.ctxLdap.modifyAttributes(groupName,member);Ensure that the value of your variable groupName is a a valid distinguished name.
Note that an OU (organizationalUnit) is not a group. You do not add users to OU's, you create users in OU's.

SortcompareFunction is not working properly for more than 1 column in advanced datagrid

Hi Guys,
I am using an advanced datagrid with groupingCollection.
I have more than 1 grouped column. How ever I am using 2 sort compare function to sort date and time.
The problem is when I am trying to sort date its workinf properly then when I jump to time column its not working and sorting few rows only inside the column but not the entire column. samething happen when I sort time first and the date is not sorting.
any help will be really appriciable .
Thanks in advance.

In our application we tend to use views to return appropriate values for a particular user.
For example (we do building inspections) the publication item sql is like
select * from inspection_sites where id in (select site_id from v_pda_bi_sites where bi_id=:bi_id)
The view acts like a dynamic parameter table (in this cases looks at experience level, status of sites, and responsibility allocations). Once the driving views are tuned this works quite efficiently, and as the dependant tables for the publication item automatically includes all of the tables in the driving view, the object gets refreshed if there is any change to any of them, even if the site details themselves have not changed

Help in using listagg function for more than 8000 char.

Hi Friends,
Need you urgent help in using listagg function for more than 8000 char.
I did the below sample SQL and in "e_orig" and "d_orig" for upto 4000 char it is working fine but I have to use it for more than 8000 char. and it is giving error,
I checked the listagg function is having limitation of 4000 char.
I tried but I am unable to achive this. Can someone provide me a sample example to achive this
select d.dname,d.loc,e.hiredate
,listagg(e.ename,',' ) within group (order by e.deptno) over (partition by e.deptno) as e_orig
,listagg(e.ename, ',') within group (order by e.sal) over (partition by e.deptno) as d_orig
from emp e, dept d
where e.deptno=d.deptno;[ This is my first post, I gone through the guideline for posting a post , and try to go according to that ( I have not pasted here create table and insert as I have used basic table emp, dept for example), please let me know if still I should give this, I will take care from my next post ]
Thanks in advance

Interesting, I didn't know you could do that, but...
BluShadow wrote:
You could write some PL/SQL code that does it all for you, but that would involve loops and would be slow.Well, objects are written in PL/SQL aren't they? And presumably there'll be implicit looping too? So it's not at all obvious that this method will be faster than doing the joining in PL/SQL in memory. The only way to find out is to benchmark them - so I have done that.
I noticed that OP's ref cursor actually only ever retrieves a single record for a bound department number, so I decided the best thing would be to test using a procedure that passes an output string back. I selected all (109) employees and put spaces in to ensure above 4000 characters. I also noticed that as he is using PL/SQL he probably can use a VARCHAR2 type, but just not ListAgg in the query, so I wrote short procedures as follows:
SimpleAggChr     - bulk collect and array processing, VARCHAR2 output
ClobAggPrc     - the custom aggregation method, CLOB output
SimpleAggClob     - bulk collect and array processing, CLOB output
I then wrote a driving script that calls them in the order above and times each call (I like benchmarking so I have my own timing object to make it easy). I then print the lengths for checking, and my object writes the timings to my output table. Running a few times I got varying results, but generally it looks like there isn't a lot to choose between them for performance.
Here's the procedure code:
CREATE OR REPLACE TYPE char100_list_type AS TABLE OF VARCHAR2(100)
CREATE OR REPLACE PROCEDURE SimpleAggChr (x_out OUT VARCHAR2) IS
l_enames     char100_list_type;
BEGIN
SELECT first_name || '                                        ' || last_name
    BULK COLLECT INTO l_enames
    FROM employees
   ORDER BY salary;
FOR i IN 1..l_enames.COUNT LOOP
    x_out := x_out || l_enames(i) || ',';
END LOOP;
END SimpleAggChr;
CREATE OR REPLACE PROCEDURE SimpleAggClob (x_out OUT CLOB) IS
l_enames     char100_list_type;
BEGIN
SELECT first_name || '                                        ' || last_name
    BULK COLLECT INTO l_enames
    FROM employees
   ORDER BY salary;
FOR i IN 1..l_enames.COUNT LOOP
    x_out := x_out || l_enames(i) || ',';
END LOOP;
END SimpleAggClob;
SHO ERR
PROMPT ClobAggPrc
CREATE OR REPLACE PROCEDURE ClobAggPrc (x_out OUT CLOB) IS
BEGIN
SELECT clobagg(first_name || '                                        ' || last_name || ',')
    INTO x_out
    FROM employees
   ORDER BY salary;
END ClobAggPrc;
SHO ERRand the driving script:
SET SERVEROUTPUT ON
SET TIMING ON
DECLARE
l_enames_c1     CLOB;
l_enames_c2     CLOB;
l_enames_v     VARCHAR2(32767);
l_timer     timer_set_type := timer_set_type ('Aggregation');
BEGIN
Utils.g_id := 'Aggregation';
SimpleAggChr (l_enames_v);
l_timer.Increment_Time ('SimpleAggChr');
ClobAggPrc (l_enames_c1);
l_timer.Increment_Time ('ClobAggPrc');
SimpleAggClob (l_enames_c2);
l_timer.Increment_Time ('SimpleAggClob');
DBMS_Output.Put_Line ('SimpleAggChr returned string of length ' || Length (l_enames_v));
DBMS_Output.Put_Line ('ClobAggPrc returned string of length ' || Length (l_enames_c1));
DBMS_Output.Put_Line ('SimpleAggClob returned string of length ' || Length (l_enames_c2));
l_timer.Write_Times;
END;
SET TIMING OFF
SET LINES 150
SET PAGES 1000
COLUMN id FORMAT A30
COLUMN line_text FORMAT A120
SELECT line_text
FROM output_log
WHERE id = 'Aggregation'
ORDER BY line_ind
/and the results:
SimpleAggChr returned string of length 5779
ClobAggPrc returned string of length 5779
SimpleAggClob returned string of length 5779
PL/SQL procedure successfully completed.
Elapsed: 00:00:27.05
LINE_TEXT
Timer Set: Aggregation, constructed at 03 Nov 2011 16:27:07, written at 16:27:35
================================================================================
[Timer timed: Elapsed (per call): 0.02 (0.000016), CPU (per call): 0.01 (0.000010), calls: 1000, '***' denotes corrected
line below]
Timer              Elapsed          CPU          Calls        Ela/Call        CPU/Call
SimpleAggChr          9.84         0.36              1         9.84400         0.36000
ClobAggPrc            9.37         0.32              1         9.37400         0.32000
SimpleAggClob         8.25         0.22              1         8.25000         0.22000
(Other)               0.00         0.00              1         0.00000         0.00000
Total                27.47         0.90              4         6.86700         0.22500
13 rows selected.

Area Chart for More than 4 Groups

Similar Messages

Maybe you are looking for