Area of tab help text too large

The image here will describe perfectly what I'm talking about: http://postimg.org/image/ea9mhb8nh/
I dont know what exactly it is called, but the help text shown when the pointer is moved to the title of a tab is a little big. What is causing the problem?

This is the setting in about:config that controls it:
* browser.tabs.tooltippreview.enable - set to false to make it normal sized

Similar Messages

Gmail Email Text Too Large

I just got the Tour 9630 for Verizon(upgraded from a Curve 8330) and all my Gmail emails text are too large. I've read that people had this issue, but I'm not sure if there was ever a solution for it? Changing the font size does nothing for the problem.
Also just another question: I rarely leave the USA, would it be wise for me to take the SIM card out? Any benefits if I do or don't? I'm using OS v4.7.1.61, which I think is the most recent?
Thanks much.

See if COMMAND - or COMMAND + does the trick.
Ciao.

Flash CS3: Help panel too large to resize

Hi!
I feel quite stupid but...
for some reason my Help panel is too large, making it
impossible to scroll down to all the items.
Here's a screenshot:
http://tinyurl.com/2aycu4
When I open the Help Panel, e.g. by pressing F1 the grey
header bar is flush with the top of the screen - no way to drag it
higher up. The problem now is that the bottom of the panel is
somewhere well below of the lower edge of the screen - so there
seems to be no way to drag the lower corners of the panel in order
to make the panel smaller, small enough to fit the window. As it
is, it is impossible to scroll down to the lower parts of the Help
panel.
Any help is very much appreciated!
Thanks!
Andreas Weber

Can't you resize from the top? In Windows you can usually
resize from any window edge. So, just move the window down then put
the mouse of the top edge until you get the resize arrows...
Or am I wrong I notice the help window is
non-standard.

Cant view photos. Says they are corupt or too large

HI.
I only recently purchased this laptop 1 year ago and I recently got married and have been given a USB with all of my phots on it. I cannot view them on my laptop. it comes up with photos are corrupt or damaged or too large. I can view them on my other computer I have at home with no problems and I can have the photos running in my background on my laptop but cant view them seperatly.
Why????
Thanks

It depends on the OS installed and the little extra programs needed for photo viewing. What version Windows or other OS?
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

File too large for quick edit mode

just bought a 12 mega pixil camera. using the photoshop album has been great until now. i can not use the files for quick edit. i can import the files from my camera after doing the recomended steps but in quick edit mode i am not able to do anything with the files. I can totogglento CS and that's the only way to do any editing but it is time consuming. After a wedding i have about 2000 photos to edit and it's just fufrustratingo have to toggle each time for a quick fix like auto balance, i have 1G of RAM and i have version 3 and have had no luck.
Thank you for your help. if you have been successful in editing a 12 megapixil file please let me know....
Zoya

More information on this issue....
I am importing them as JPEG.
I have cropped the photos by 1/100th of it's original size so by definition i am reducing the pixels.
ie, original jpg file is 3.5 MG photo:4368x2912 file type is jpg
camera canon eos 5d
error message is: "the photo you are tying to edit is too large and cannot be eidited. please try usign adobe photoshop or adobe photoshop element s to eidt this photo."

My time Machine keeps saying, "Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 345.74 GB but only 289.80 are available." I have already excluded files. I have a 1tb external drive. HELP!!!

For over two weeks now I have been frustated and not having my TIme Machine back up to my 1tb external drive. I dont understand why now its a problem. It keeps saying
"This backup is too large for the backup disk. The backup requires 345.74GB but only 289.80GB are avialable. Time Machine needs work space on the bakup disk, in addition to the space required to store backups. Open Time Machine preferences to select a large backup disk or make the bakup smaller by excluding files." So I have already excluded almost all of my files, and even deleted the backup disk yet, that quote still keeps popping up. I am truly at a wall with this. I have a Mac OS X version 10.7.5. CAN SOMEONE HELP ME PLEASE????

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Both the Texts and Graphics When I open windows are too large and blurry. Is this anyway I could fix this?

When I open Firefox (Firefox is updated to its latest version) both the text and the graphics are too large. I've tried zooming in and out features, but the texts become unreadable.

CTRL+0 (<--that is a zero) will reset your zoom level on affected pages. Firefox remembers the zoom level you last used on a page.<br />
See Firefox built-in Zoom functions:
*http://support.mozilla.com/en-US/kb/Page+Zoom
*http://support.mozilla.com/en-US/kb/Text+Zoom
If that does not fix the problem, you can try renaming the file (''with Firefox closed; Firefox button > Exit or File > Exit'') '''''content-prefs.sqlite''''' to content-prefs.sqlite.old (or delete the file) in the Profile Folder to reset the page zoom on all sites. That file will be re-created when you restart Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*You can use the following to go to the Firefox profile folder:
**Help > Troubleshooting Information > Profile Directory, click Open Containing Folder
Zoom Add-ons:
*'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ '''''
*'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
**More info on NoSquint: http://urandom.ca/nosquint/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Texts are too large on the screen (which appers wi...

the font size is too large in the screen i get for texting (the fonts appear on the screen when i open the key board)
all the other font sizes can be changed but this font size couldnt change..
i have used 5800 and it had a nice font size there..
please help..

mgwaltney,
The most likely reason for this would be that the display resolution has been changed. You should first make sure that it is set correctly (at the maximum, "native" resolution if an LCD) in System Preferences>Displays.
If the resolution has not been changed or set below the native resolution, then there's not much you can do beyond re-sizing windows as they appear. It shouldn't take too long to get everything back to normal.
Scott

Why do pages like natwest and ELC not display properly? It is like their text is too large, yet other pages are fine?

I have abrand new ASUS notebook with a 11 and a half inch screen. I have up to date Windows system, and am using the latest version of firefox. I have gone through all the tips in the help section of firefox including clearing cache and cookies, and also checking all settings for text, however none of this has corrected the problem. For example when i log into my online banking the text is that big it doesnt fit into the boxes set on natwest screen, so therefore i can view all of the text and it gets jumbled together in some places. With ELC a good example is the menu across the top of the page which gives all of the categories of products they sell for you to click on. As the writing is too large it does not display properly. Im not sure what else to do to crrect this. Can anyone help?

Try 2 things, if they can help:
1. on the same window, where you have 1 of above site opened. Do ctrl + F5.
2. Do Ctrl + shift + P, it will open a new private window and browse any of the above site.

The message I get is: Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 111.27 GB but only 42.1 GB are available.

I have a problem with my Time Capsule. The message I get is: Time Machine could not complete the backup. This backup is too large for the backup disk. The backup requires 111.27 GB but only 42.1 GB are available. As a result, my backups are no longer running. My umderstanding was that the Time Capsule would automatically delete old backups to make space. Can anyone help me figure out how to get my backups to run again?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Cannot decrypt RSA encrypted text : due to : input too large for RSA cipher

Hi,
I am in a fix trying to decrypt this RSA encrypted String ... plzz help
I have the encrypted text as a String.
This is what I do to decrypt it using the Private key
- Determine the block size of the Cipher object
- Get the array of bytes from the String
- Find out how many block sized partitions I have in the array
- Encrypt the exact block sized partitions using update() method
- Ok, now its easy to find out how many bytes remain (using % operator)
- If the remaining bytes is 0 then simply call the 'doFinal()'
i.e. the one which returns an array of bytes and takes no args
- If the remaining bytes is not zero then call the
'doFinal(byte [] input, int offset, in inputLen)' method for the
bytes which actually remained
However, this doesnt work. This is making me go really crazy.
Can anyone point out whats wrong ? Plzz
Here is the (childish) code
Cipher rsaDecipher = null;
//The initialization stuff for rsaDecipher
//The rsaDecipher Cipher is using 256 bit keys
//I havent specified anything regarding padding
//And, I am using BouncyCastle
String encryptedString;
// read in the string from the network
// this string is encrypted using an RSA public key generated earlier
// I have to decrypt this string using the corresponding Private key
byte [] input = encryptedString.getBytes();
int blockSize = rsaDecipher.getBlockSize();
int outputSize = rsaDecipher.getOutputSize(blockSize);
byte [] output = new byte[outputSize];
int numBlockSizedPartitions = input.length / blockSize;
int numRemainingBytes = input.length % blockSize;
boolean hasRemainingBytes = false;
if (numRemainingBytes > 0)
hasRemainingBytes = true;
int offset = 0;
int inputLen = blockSize;
StringBuffer buf = new StringBuffer();
for (int i = 0; i < numBlockSizedPartitions; i++) {
output = rsaDecipher.update(input, offset, blockSize);
offset += blockSize;
buf.append(new String(output));
if (hasRemainingBytes) {
//This is excatly where I get the "input too large for RSA cipher"
//Which is suffixed with ArrayIndexOutofBounds
output = rsaDecipher.doFinal(input,offset,numRemainingBytes);
} else {
output = rsaDecipher.doFinal();
buf.append(new String(output));
//After having reached till here, will it be wrong if I assumed that I
//have the properly decrypted string ???

Hi,
I am in a fix trying to decrypt this RSA encrypted
String ... plzz helpYou're already broken at this point.
Repeat after me: ciphertext CANNOT be safely represented as a String. Strings have internal structure - if you hand ciphertext to the new String(byte[]) constructor, it will eat your ciphertext and leave you with garbage. Said garbage will fail to decrypt in a variety of puzzling fashions.
If you want to transmit ciphertext as a String, you need to use something like Base64 to encode the raw bytes. Then, on the receiving side, you must Base64-DEcode back into bytes, and then decrypt the resulting byte[].
Second - using RSA as a general-purpose cipher is a bad idea. Don't do that. It's slow (on the order of 100x slower than the slowest symmetric cipher). It has a HUGE block size (governed by the keysize). And it's subject to attack if used as a stream-cipher (IIRC - I can no longer find the reference for that, so take it with a grain of salt...) Standard practice is to use RSA only to encrypt a generated key for some symmetric algorithm (like, say, AES), and use that key as a session-key.
At any rate - the code you posted is broken before you get to this line:byte [] input = encryptedString.getBytes();Go back to the encrypting and and make it stop treating your ciphertext as a String.
Grant

When trying to edit or download a pdf document, it becomes too large or on screen or normal size with many lines of text blacked out. How do I get it to do the normal presentation of the document

For years my pdf docs downloaded for viewing or editing as normally sized documents.
Now when I pull up a pdf from file, it becomes too large or becomes normal page size but many of the lines of text are blacked out. How do I correct it to go back to the previous default page size?

Hi wh4936,
Are you opening those files in Acrobat or Reader? You can set the default page size in the Page Display preferences. Choose Acrobat/Reader > Preferences in Mac OS, or Edit > Preferences in Windows to access the preference settings. Do the black lines only appear when the PDF is zoomed in? Or are they there regardless of the page magnification?
Best,
Sara

When scaling in page setup, 1st page prints correctly, but subsequent pages do not scale correctly/too large for the paper, parts of the text missing

When trying to print in Firefox, and when scaling the page size in page setup, the first page prints correctly, but subsequent pages do not scale correctly and are too large for the paper, with parts of the text are being cut off at the top and right. This is not fixed by checking or un-checking the "ignore scaling/shrink to fit page width" in the print window, or by changing the scaling%.
I am running Firefox 15.0.1, on Mac OS 10.5.8.
The same problem happens in the print preview and if I save the print as a .pdf
I have tried all the fixes in the how to's and others in various forums with no improvement.
This happens every time I try to print a document scaled up or down only in Firefox.

The 2nd page print scaling error has been an issue with Firefox on the Mac since 2011. People at Mozilla have not considered this a major problem. Try printing anything at less than 100% and you'll quickly see how every page after the first page being scaled wrong gets old real fast. The lack of a solution to this issue forced me long ago into using Safari as my primary browser. Good luck waiting until version 21 for a solution. Current release is 18.0.2.

Code too large for try statement - help :(

Please help :(
          We are migrating our project from an older technology, Kiva from netscape
          (and about time we migrate) . Kiva uses template evaluation similar to
          jakarta velocity. So the fastest way we found was to translate kiva
          templates to JSPs via perl script. All is working fine except a bunch of
          JSPs which are too large for the compiler to handle. If we were not
          migrating and instead wroking from scratch we would have simply made the
          JSP's size smaller and used jsp:include, but in this case it will involve a
          lot of effort as that means changing a lot of business code.
          Basically what we get is "code too large for try statement". Is there anyway
          we can tell weblogic to put smaller code fragments in try/catch when it
          converts a JSP into java code.


          Haider,
          Have you seen the following Sun Bug Parade posting
          http://developer.java.sun.com/developer/bugParade/bugs/4210912.html
          Additionally, you may want to try the '-noTryBlocks' jsp compiler switch and see
          if it makes a difference
          See the following 6.1 URL
          http://edocs.bea.com/wls/docs61/jsp/reference.html#57805
          Chuck Nelson
          DRE
          BEA Technical Support

Form fields appear normal on my computer, but are too large on client's computer

I recently created a fillable PDF using Acrobat Pro for a client. I have done this many times before, and never had any issues with formatting. On my computer, the fields appear perfect, but on the client's computer they are too large and obscure the surrounding text. Please see the first screenshot for reference. Notice the large white form field on the left side. He has viewed the document both on a Mac (in Preview) and on a PC (Acrobat Reader) and had the same problem. The following is a screenshot of the same file on my computer:
On my computer, the name field appears to fill normally. Does anyone have any idea why this is happening, and what I can do to fix it?
Thanks!
Jeanne

That person is using Preview and not Adobe Reader or Acrobat. Preview's support for PDF forms is dismal and it should not be used. It actually corrupts PDF forms (and other PDFs) in a number of ways, so that particular file should not be used again. If they don't want to install Reader, there's not much you can do.

Area of tab help text too large

Similar Messages

Maybe you are looking for