Area Posts APC Only and Area Posts Only APC Directly

Hi,
With a drived depreciation area , what different result between setting depreciation areas post to general ledger
with Area Posts APC Only(5) or Area Posts Only APC Directly(6)?
Thanks & Regards
Ping

Hi Ping,
5 means that RAPERB2000 makes the periodic posting
6 means V2 posting.
V2 means direkt posting. If this direkt posting don't works, the RAPERB2000 makes the missing postings (4 and 6 have this kind of direkt postings)
In the document header you can see:
Transaction ASKBDN: direct posting
Transaction ASKBN: Raperb makes the posting
In Transaction ARAL you can see the reason why the V2 didn't work.
Regards Bernhard

Similar Messages

I recently got an iphone 5S and my songs not purchased from iTunes are grayed out (phone only) and are skipped past when playing them through my iPhone.

I recently got an iphone 5S and my songs not purchased from iTunes are grayed out (phone only) and are skipped past when playing them through my iPhone. i have tried the following:
1) Removing all music from phone and resynced to iTunes PC library.
2) Erased phone and restored from back up
3) Erased phone and started as a new iPhone
4) Reformated the music files in my library that weren't playing
5) Deleted songs from iPhone and computer and re-imported CDs
6) Tried to redownload my COMPLETE MUSIC LIBRARY from iCloud.
7) I have also turned it off and turned it back on several times
8) I tried syncing through my macbook (only moved partial songs to it to see if it would even work).
9) I have tried to get Siri to play them, did not work.
10) All music does play fine on my iPod Touch 3rd (iOS6 i think) gen and iTunes on Mac and PC
11) I added a CD to my roommates iTunes and it plays on their iPhone 5S but not mine.
After all of these things it is now WORSE!!! My iTunes purchased songs are now experiencing the same issue along with some (not all) of the original music files that were skipping and grayed out. My conclusion is i have no clue at this point! I have done everything i have found online in EVERY discussion, i have spent over 60 hours trying to get this to work and i am asking myself, i bought this product why am having to fix this when it worked just fine on my iPod touch (3rd Gen) and iPod Classic!!!! PLEASE APPLE FIX THIS ISSUE FOR US!!!!

I had this problem too after i upgdatd to OS X Mavericks... only the songs on my iphone 5s that i purchased from itunes would play.
i read something about it being a syncing issue. when you plug your phone into your computer with the usb cable, the person said to switch from automatic syncing of itunes to the "manual" option. mine was already set to manual so i wasn't sure anything would work. BUT, when i plugged my phone into my computer, it started to sync all of my music on my phone again (top of itunes bar where song playing/time is listed said "now syncing 123/534 songs to x's iphone"). once that was completed, i checked the music app on my iphone and everything was back to normal!
so, i would suggest setting your music syncing settings to manual if you haven't tried that yet!
hope this helps!

How do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

how do i get my photos to stream to my iPad in the events that were oringally created. Right now they are streaming as photos and are not grouped at all. I would like to get them back into the events that were originally created

Hi..
Thanks for the reply..
My original I Phone 5 was running IOS 6.12
My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
but it doesn't help me..
Steve

TS1347 Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.

Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.

Settings>General>Accessibility>Increase Contrast
Settings>General>Accessibility>Bold Text
are some settings that may help.
There are other settings there ...they may not be to your liking but try them all anyways.
But that's about all you can do for now...except to voice your opinion to Apple here:
http://www.apple.com/feedback/ipad.html

I merge projects in aperture, it works fine until aperture restarts. After aperture restarts, the projects are no longer merged, and are back the way they were. Can anyone suugest how to make the merge permanent?

I merge projects in aperture, it works fine until aperture restarts. After aperture restarts, the projects are no longer merged, and are back the way they were. Can anyone suugest how to make the merge permanent?

I tried the first aid tasks but the issue is still there. I have more info now though. It's not a problem with merging.
The problem is that new projects are being generated everytime aperture starts (with the same name, ie 01, 02.... and 01 (1), 02 (1) .....)
When aperture start, it shows "importing". When I click on importing, it goes into the activity box. In the activity box, has many lines as below. The added projcts are all empty. It's annoying because i have many useless projects being generated.

On my ipad3, the Skype IM is not running. All msgs i send are shown as "pending" and are not being sent out.

On my ipad3 skype IM is not running. The msgs are shown as "pending" and are not going out.
Also i could earlier send sms to mobiles from skype. Now that facility has dissapeared from teh menu.
Very thankful for any help.

You both backup your iPhones on the same Apple ID, so when she restore her iPhone it pulled the data from the last backup (your iPhone). She would need to erase her iPhone and restore from her back up. Take a look at this link in the restore section, http://support.apple.com/kb/HT4859

I go to File get info sharing and it says I have custom info, me read and write, staff read only and everyone read only and I don't know how to change the setti

I am attempting to download an update for Firefox - when attempting to open it tells me to go to File/getinfo and when I look at sharing and Permissions there are three entries, me, staff and everyone - me is Read/write, the others are read only and there is a note that says I have suxtom access but still cannot drag to applications -
how do I unlock this process

Hello mbennjr, if you have problem with update or permissions firefox the better way is to '''download and install the new version'''.
1. Download a copy of the latest firefox from http://www.mozilla.org/en-US/firefox/all.html
2. '''Trash''' the current Firefox application to do a clean install.
3. Install the version that you have downloaded.
Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox#Mac Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
see also: [https://support.mozilla.org/en-US/kb/install-firefox-mac?redirectlocale=en-US&redirectslug=Installing+Firefox+on+Mac#os=mac&browser=fx24 Installing Firefox on Mac]
thank you

What are these startup items and are they harmfull

Hello
I Have a M55-S325. I have noticed some items on my startup list in system Configuration Utility
TCtrlIOhook.exe
TPSMain.exe
Ltmoh.exe
AGSMMSG.exe
Apoint.exe
TFncKy.exe
So My Question is What are these and are they harmfull
if so how do i remove them.
PLEASE HELP

Hi David,
The items you have listed are genuine items use by your operating system although they may be stopped if you wish without doing any real harm. It will largely depend on whether you want to use any of the functions in which they are involved.
For example, TCtrllOhook.exe and TPSMain.exe are associated with the Toshiba power management utility.
Ltmoh.exe and AGRSMMSG.exe relate to you installed modem.
Apoint.exe is associated with you pointing device (Touchpad or whatever).
TFncKY.exe is related to the Toshiba function keys feature.
Obviously, if you are not using your internal modem then the modem related items can be stopped without any ill effects, similarly the Toshiba Function keys.
regards,

Why are my Text Contacts and incoming calls only are showing as "Message Received"

All of my text contacts messages just say "Message Received", but if I have set a ringtone for them, that is the ringtone that plays. The same is true of incoming calls, It will show the phone number, but not the assigned name. I don't know everyone's phone number! I barely remember mine!
HELP?? Please ?!
How do I get my caller ID to work properly again?
I have a Galaxy S3
Thanks

Hey there, celtmaidn! Thank you for bringing this matter to the community. I'm sorry that your Caller ID isn't providing you with the details you need, but I'm happy to help. If I understand correctly, incoming calls and messages do not display the name of any of your calls or messages, just the number. Does the same occur on your outbound calls and/or messages? Also, you may have a contact (example: Dave) that you have programmed in your S III with a mobile number, but "Dave" may have a home number as well. Have you confirmed that the number used for that call or message is the same one you have programmed into your device?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Using Acrobat 9.5.5, I scanned a catalog in several segments, to merge later. How do I reverse the order of pages of the back side (odd) pages, and can I renumber each set as even numbers only and odd numbers only?

I scanned a catalog for my archive - double sided pages of course.
It was easy enough to scan the front pages first (odd numbers, 1-3-5) , in several sets of 30 pages, therefore several separate pdfs.
Then I scanned the back side (even numbers 2-4-6) pages but in their natural reverse order, rather than manually reordering all 300 pages.
Now I need to reorder the even pages which are naturally in reverse page number order (300-298-296...)
and I need to renumber all of the pages as only odd or even numbers - set 1: pages 1-3-5-7... Set 2: 2-4-6-8...
Then I can merge everything into one pdf.
How can I reverse the page order?
How can I renumber pages as only even or only odd numbers?
Anyone have these solutions? I don't use much of acrobats features, but it seems to be a pretty basic demand to be included. I can't find any clue in the software menus or online help.

You can do such ordering with JavaScript. There is a recent post with a JavaScript for dealing with another aspect of page order that might provide what you want. You will have to search the forum for the post that was about 2 or 3 weeks ago as I recall.

Empty inbox, but emails are still on server and are on harddrive

My inbox is empty, just a white blank space, even though the blue numbers say there are emails, and even though the emails are still on the server, and even though previous days emails are saved to my harddrive.
The Mail program won't display them.

Chris,
If your mailboxes, or at least some of them, originated in Panther, I want you to read the article at the link below, and perhaps get back to me with some observations, before attempting any changes:
http://docs.info.apple.com/article.html?artnum=301315
This issue of leftover files applies not only to mailboxes you have previously created (which are in the Mailboxes folder the article mentioned) but can also apply to those mailboxes in account folders created prior to the upgrade to Tiger.
Also, please report the size of each file or folder. Do not, however, try to list the files that are within the folder named Messages, that is found in each and every mailbox. It is very important to compare the size of any file named "mbox" with that of the Messages folder. If the mbox is greater in size than the Messages folder, then not all messages have been converted to be in the Messages folder.
The path to the Mail folder is Home/Library/Mail -- within the Mail folder are one or more account folders and the Mailboxes folder.
Ernie

If I'm not prompted to save a password, how can I create an exception URL? Library card numbers are confidential by law and are being displayed on our machines

The autofill/password function is allowing library card account nuumbers to display for every previous user on our library computers and probably other computers on campus. Since the box asking "do you want to save" does not appear, we aren't able to check the "Never" box and add the library catalog URL to the Exception list in the Security tool which was the solution recommended in 2011.
Although we recommend our users change their PIN from the default, the majority of them do not so their library records are publicly available, which is a violation of the Patron Confidentiality Act in our states and probably the other 49 states.
We would like to retain Mozilla as a browser option on our library computers, but if there is no way to fix this, we will have our ITS department block it on the College network.

You can lock the browser.formfill.enable pref and possibly the signon.rememberSignons pref as well to false to disable remembering form data and log in names and passwords.
<pre><nowiki>//
lockPref("browser.formfill.enable", false);
lockPref("signon.rememberSignons", false);</nowiki></pre>
You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
See:
*http://kb.mozillazine.org/Locking_preferences
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes

Functions are not using default and will not validate without direct input

Hi. I am recreating all of our mappings (from 9.0 to 11g). And I am finding that any function that does not have a direct input for every input variable (rather than using the defaults as defined in the function) no longer will validate in OWB. It states that the input parameter is required but is not connected.
I have worked around this so far by adding Constants to pass the default values. I tried setting the default value in the property inspector window for each specific input parameter and this did not work, I still get the same error.
Is there a way to fix this? i am not happy with having to add all these constants, and I don't see why it is not using the defaults that are defined in the functions themselves. Any help is appreciated.
Thanks,
Kaisha

By the way for anyone who is curious....
The reason that the functions and sp's weren't working correctly was because I had movedthem into the new DB wrapped. I don't know why it caused this but when I did dbms_metadata and replaced them all unwrapped, and then reimported them into OWB all the mappings compiled.
K

After installin iCloud all of my contacts are missing from Outlook and are in iCloud. How do I get them back into Outlook.

I installed iCloud on windows 7. When I opened outlook to send mail my contacts and address book are missing. I did the contacts in iCloud.
How do I get them back into Outlook?
Thanks,

There's a list of things to check here: https://discussions.apple.com/docs/DOC-3792.

How do I get rid of viruses that are on my mac and are slowing my computer down?

its really slowing up my computer and i have no clue how to get rid of them PLEASE HELP!!!

There are no viruses. There is a trojan you would have to download and run from strange websites. What makes you think the slowdown is due to a virus? Maybe you could provide some specific evidence.
Trojan War
If you discover a trojan program is running on your computer then look to the following information for assistance:
1. A recent discussion on the Apple Support Communities: MacDefender Trojan.
2. An excellent site devoted to Mac Malware: Macintosh Virus Guide
3. Another site for removing MacDefende, et.al.: MAC Defender Rogue Anti-Virus analysis and Removal
4. A new removal utility - MacDefenderKiller
5. And to protect against a recent variant, MacGuard.
Before you delete anything, we need your help. Some AV folks in our community need to analyze these files in order to protect others. Before you delete anything please consider doing the following: Upload either the original .zip file or the MacGuard application to http://www.VirusTotal.com. If either is not detected by ClamXAV, then also upload it to http://cgi.clamav.net/sendvirus.cgi. If you are uncomfortable doing this for any reason and can determine the URL of the site where you got it please send the link to [email protected].
Removing strange software can be a task. The following outlines various ways of uninstalling software:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a Startup item or a Log In item. Startup items are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the Delete [-] button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Note that you must have this software installed before you install software you may need to uninstall. Uninstallers won't work if you install them after the fact. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them and others at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQs on removing software and dealing with spyware and malware.
After removing all the components of the software you may have to restart the computer to fully disable the software. This will be the case when removing software that has installed a daemon. After the daemon has been removed you need to restart the computer to stop the daemon. Alternatively, you can kill the daemon process using the Terminal application or Activity Monitor.

Area Posts APC Only and Area Posts Only APC Directly

Similar Messages

Maybe you are looking for