Area that can be edited by someone w/o html knowledge

I had a request from someone to help create a web site, which
is not a problem. However I have been asked if it can be made so
that frequent changes can be made by them. I suggested a blog,
however thought about it and wondered if there was a way to create
an area on a page, for instance the index page, where a file could
be accessed and changed by the person who the site is for. I think
what they want to do is be able to update it immediately, rather
than contact me with the change and have me do the update. The way
I understand it is that it would be basically for a daily or weekly
announcement. Can this be done somehow?
I guess what I mean is this. There is a small box on the
right hand side of the page that says "Announcements", and then
there would be a small area, maybe in a table underneath that
heading, that would contain the announcement. Can I make that area
beneath the heading access a text document or something that can be
changed by someone without any html knowledge, and have that be the
way the announcements are changed?
Hopefully I have described what it is that I am trying to
do.

If you only need to change some text without formatting make
the announcement come from as database and let the user change the
entry from a form, you could also add a picture with the name
stored in a database so they could upload a new picture.
If you want to have them edit with advanced formatting use a
content editor program one that gets good praise around here is
http://contentseed.com/ Try and
google content editor

Similar Messages

How can I send scanned files, which are documents changed from doc to PDF, as documents that can be edited if the recipient doesn't have Adobe capabilities?

How can I send scanned files, which are documents changed from doc to PDF, as documents that can be edited if the recipient doesn't have Adobe capabilities?

Hi flaviusjack,
If you still have the .doc files, it might be best to send those to your recipients so they can be edited. Otherwise, you can use ExportPDF to convert the PDF files back to .doc format. But, again, that step would be unnecessary if you have the .doc files.
Best,
Sara

How do I convert an e-mail into a Word file that can be edited and printed?

I received an e-mail from a relative that I want to convert into a Word file that can be edited and printed?

Go to appleid.apple.com to manage the ID, sign in. If you are using two-step verification on the ID, select the Name, ID and Email Addresses section, then change the birth date on the bottom right. If you are using security questions instead of two-step verification, select the Password and Security Question and answer the two security question to access and change the birth date. At the present time you may not be able to enter the correct birth date, but you should be able to change it to 1/1/2001, which will have child ID status.

Web dynpro screen with multiple rows with columns that can be edited

Web dynpro screen with multiple rows with columns that can be edited individually:
Hi
I am busy creating a screen in web dynpro for ABAP which we would like to make available via Portal ESS (Portal 7).
I need to add 'n type of table (or almost something like Excel) or something in which someone can type a few paycode numbers (there should be lets say 10 blank rows in which info can be typed in and if I click on a button or so, more rows must be added if necessary. Then in the other colums stuff like amounts must be entered which one should also be able to edit then and there.
Can anyone assist in what I can use for this? There does not seem to be some existing element that I can use.
Help will be appreciated.
Regards
Debbie

Hi Debbie,
Whiel Creating table you need to be care full that use chose INPUT FIELD as the CELL EDITOR. Just guessing that if ur table is not editable u might have choosen TextView as default cell editor type.
check link for details on TABLE UI
[http://help.sap.com/saphelp_erp2005/helpdata/EN/b5/ac884118aa1709e10000000a155106/frameset.htm]
easy way is to first add UI ELEMENT TABLE to your VIEW, then right click over it & select create binding from context. After you have a pop up where you can select what columns you want what should be its cell editor etc.
Greetings
Prashant

I am trying to convert a PDF into a document that can be edited - it's a client feedback form. I am using Adobe forms Central and it's saying that it can't use my document.

I am trying to convert a PDF into a document that can be edited - it's a client feedback form. I am using Adobe forms Central and it's saying that it can't use my document.

Hi Michelle ,
We are extremely sorry that you have had a bad experience with Adobe .
As far as your issue is concerned ,Acrobat generally prompts for internet connection as it is required to activate the product before you could use it comfortably .Once the product is activated or licensed you would be able to use the software offline .
This could be the possible reason you are experiencing this .Please check if you have done so and still facing this .And if you have not ,you need to license/activate your product by typing in your credentials ,i.e Adobe ID and password .
You could also refer the following link to get updated about the activation of your product .
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to
Regards
Sukrit Dhingra

Any suggestions for programs that can convert mpeg1 to a format that can be edited in iMovie Version 8.0.6 (821) and/or iMovie HD Version 6.0.3 (267.2) Thanks

Any suggestions for programs that can convert mpeg1 to a format that can be edited in iMovie Version 8.0.6 (821) and/or iMovie HD Version 6.0.3 (267.2) Thanks

Hi Mark
Was just looking for the answer to this exact question and I just found something that worked for me so don't know if it might be of use to you or you might have already solved your problem! Basically when I was in iMovie and I clicked to import movies from the computer into iMovie and I found the clip I wanted to import, there are a few options. I think it asked which Event I wanted to add it to but most importantly it asked me what file size I wanted...I had originally been clicking Large because it advised me to because it reduces the file size...but just on a chance there I selected 'Full - Original' for size and it imported perfectly into iMovie in it's original vertical form!
Hope this helps!
Bianca

Warning message DM10826 when running gendata (text merge area that can shrink/grow on image that cannot grow)

I am currently converting from Documaker 11.3 to 12.2 While running GENDATA I get the following message:
DM10826: Warning in TextMergeParagraph(): Attempting to use a text merge area that can grow, on the image <JACKETPAGE> which cannot grow. Processing will continue.
I have a text area in the JACKECTPAGE section that has the sizing option of "Can grow and shrink" selected. This is because I have an imbedded tag in the middle of the text area. The "form section options" for the JACKETPAGE section that contains the text area does not have "Can shrink and grow" selected. If I change the JACKETPAGE "form section options" to select "can shrink and grow" the warning message goes away.
Couple questions:
(1) What are the ramifications of selecting "can shrink and grow" on the form section option? I really don’t want anything else on the form to move around.
(2) If there are no ramifications of selecting this option on the "form section options" there an easy way to find every section that has a text area that is flagged as "can shrink and grow" so that I can proactively flag the associated form(s) in order to eliminate these messages?
Thanks for whatever help that you can give on this!

The message is actually an old one, so I would be surprised if you are just now getting the message moving from 11.3 to 12.2. Unless it is perhaps because you were previously not using Studio model MRL and now you are.
The message indicates that a growing text area could potentially push objects out of the section boundary or even exceed the boundary itself - assuming you mapped in enough data. It is simply a warning.
If you know that your content can't really grow beyond your section or if you know and expect the result in case it does, then just ignore. Or if you know there is sufficient room for the content to grow within the section without overflowing the boundary (because you have white space at the bottom), then you could set the Can Grow on the section and prevent the message. Your choice really depends upon what you prefer.
However, if the growing text area can indeed push objects (or itself) outside the boundary with the data you map, then setting the Can Grow on the section will affect your output.When a section grows in size, this adjusts the position of the remaining sections on the page. If you don't allow that, you could have overlapping content if the text area pushed something outside the boundary of a section.
As for whether there is a way to globally set existing sections to grow, I don't think there is. The version you have now will automatically try to set the section to can grow when editing a section and you add a dynamic text area. However, you can still turn that off if you don't want it on. That does not affect existing forms or sections which you have in the library until you were to edit the sections and modify a text area.

Can I add a text form field in Photoshop that can be edited in Acrobat reader?

I design coffee labels with Photoshop then send them off to the printers. The printers then open up a PDF and put in the best before date before printing. At the moment I have to add the text form fields using Acrobat Pro after i've saved the photoshop document as a Photoshop PDF. The problem is if I want to edit the labels at a later date, I have to re-add the text form fields with Acroabat again.
Can I add a text form field in Photoshop that can be edited in Acrobat reader? Is it better to use another program for this task?
Thanks in advance
Ian

As A1's Calculate script, under "Simplified field notation", enter:
A * 0.8
The same goes for B1 and B, resp.

I need to do a file that can be edited by anyone after saved, there is any Indesign saving format that allow it?

I need to do a file that can be edited by anyone after saved, there is any Indesign saving format that allow it?
There is any way to let one page of the final pdf exported file editable?

Hi there
You haven't seen any replies because you posted this to the Captivate forums. Hang tight and I'll move it over to the InDesign forums where it may gain some traction.
Best of luck in finding a solution! Rick

Create PDFs that can be edited in Acrobat Reader?

All,
Is it possible to create a PDF (designed in Indesign CC 2014/Mac, and exported as PDF in Acrobat Professional XI) that is then a) editable in Adobe Acrobat Reader XI (11.0.09) and b) is of the quality and has fonts embedded to act as a print quality PDF?
We seemed to have achieved this last year in a somewhat cumbersome manner but now on repeating the same process (Comments) Adobe prompts you to upgrade to Professional. Have features been disabled? Is there a way of doing this still? An efficient way?
We are trying to create a series of advertisement templates that the client can just edit certain text in.
Adobe, if you are listening... in the absence of not being able to email you directly, please help us out!

1. My mistake, for clarity the Client needs to edit the text in Adobe Reader XI (11.0.09).
2. I know that, but Client is insisting and I am looking for a definitive answer to end the matter
3. Yes I know, however we have advert templates that may contain a headline such as 'Property For Sale in <xxx> Area' and body copy that says: 'Thinking of selling your <xxx> Area property? Then contact your <xxxxx> branch...' (with <xxx> indicating areas the client needs to input text into a print-ready PDF in the correct embedded font, styled as per the brand guidelines (font size, font, font colour, justification) in Acrobat Reader XI (11.0.09).
4. That's what I thought, RE typographic control. To be clear by using the forms method it is not possible to style type? Nor is it suitable for high quality printing output?
5. This is an interesting point as yes our Client would need to save the files they've edited in Reader, so what issues would be faced?
6. We tried making the text editable whilst retaining the typographic style via Comments, but it involved exporting and drawing individual text boxes in a manual way.
I have suggested the Client upgrades to Acrobat Professional, besides that what would you suggest?
Much appreciate your support,

Creating multiple lines of text that can be edited by one line

I was editing a file in illustrator that a past designer set up and he set it up so that there are multiple lines in a column of text that are linked some how so that the first line of text can be edited and the rest will change with it. How do you set it up to do this?

I actually needed to know how to basically set up one text box created and than copied 10 times in a column but the top text field can be edited. When the top one is edited it automatically changes all of the other rows as well at the same time. I appreciate you getting back to me though. I figured it out.
Basically what you have to do is create your initial text field. With the text box selected you go to your appearances panel and click on the effects icon at the bottom of the panel and choose Distort & Transform > Transform. Then in the transform dialogue box you choose how far you want the copied text boxes to move (to the right or left) and then how many copies you would like and hit Copy. Than all you have to do is edit the first text box and all of them will change at the same time.
It is actually a pretty neat feature and will save me a lot of time when setting up some projects.

Is there a way to save a file in indesign that can be edited outside of adobe?

I am creating a menu for a local pub landlord and he has requested that the menu be easily editable, by him, as to not keep asking me for any slight changes.
Is there any file format that can be easily edited outside of indesign. I know there is the Acrobat Pro which would edit a PDF and could solve this problem, but he is unwilling to spend money on any software.
I am designing the menu in indesign with text and images.
Any help would be appreciated.
Thanks
Liam

Jus a clue for u
[email protected]
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
auto_create_save_in_for_loop_240403.vi ‏26 KB

Review area; I can't edit text per question

I've looked but haven't seen my question (or the solution), so here it is.
This time it is not about editing the review area.
I have a quiz with several multiple choice question, one answer only - although somewhere in the middle there's one with multiple correct answers.
When I double click in the slide on the review area I see the text for the correct answer and the wrong answer.
When I edit this text, it's changed for all the slides/questions. Even though default setting is: apply for this slide only.
What to do?
I've read in the Helpfiles that a changed review area becomes the default for new areas. The problem however is that the changed text is also seen in already existing slides.
I have made my questions by duplicating the first question and then altering the duplicate each time. Could that be the cause?
Hope someone can shed some light. Thanks!

Hi there
As you have seen, the Review area is rather generic. It only allows for a single configuration change that appears on all Question slides.
If you feel this should operate on a "Per Question" basis, please consider submitting a Wish Form to ask for it. (Link is in my sig)
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Is it possible to make a form on a website that can be edited and saved? If so How?

I am making a site for a client and he requires an editable form. It would need at least 10 editable text boxes and then I would need to have a way to save it and publish it to the website. (The client would be the only one editing so I don't really know what to do as he doesn't have any of the Adobe tools used to edit the site) So here are the questions I need answered:
1) How do I make an editable form? (If coding is involved I would appreciate it if you could post that as well)
2) After the site is finished my client will need to keep adding things, is this possibe or will he have to send the files to me and haveme edit the site myself?
3) How do I make it so my client will be the only one who can edit this?
P.S. I am not making a Blog. He would be adding these forms to a list of links to the files which the customers could print. If you have any questions to me just ask.
Thanks.

whatever needs to be edited by your client should be done by having your swf load an xml file and using that data. if your client doesn't know how to edit an xml file, you'll need to make another user interface app that will edit the xml for him.

Message board that can be edited by the posted person - Is it possible?

Hello,
We have a very old application at the portal which uses as a message board of the organization: People can advertise messages over there by categories, for example if they would like to rent an apartment, to sell sonmething ect. Of course each person is able to edit his/her own advertised messages.
We are considering rewriting this application but before we do I wanted to know if there is such an out-of-the-box module already inside the portal that gives this exact functionality (Perhaps using Collaboration)?
If yes, I will be happy to hear about ideas of how to implement such need using the portal built in tools.
Thank you in advance,
Roy

Hi Roy,
You have the "Discussion forums" feature of Knowledge Management in Enterprise portal. It comes as a feature in KM.
You just need to create an iview for discussion forums. There are different iviews - Administrative view for discussion forums and End user view for Discussion Forums.
Apart from this you can create your own forms using XML builder under
Content Management - > Forms Builder
Try this link below:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/frameset.htm">XML Forms</a>
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/90b49c90-0201-0010-8296-bb22a60b2b76">Creating XML forms 6.0</a>
Hope this helps.
Regards,
venkat.
[Reward points if useful]

Area that can be edited by someone w/o html knowledge

Similar Messages

Maybe you are looking for