Areca 1882x speed drop with a BBU - expected?

Anyone using an Areca ARC-1882x RAID controller with a BBU (Battery Backup Unit)? If so, any difference in performance with / without BBU, and did you have to change any settings?
Here is what I am seeing on a client's Mac Pro with a CineRAID 12-bay tower SAS Expander:
No BBU: 1000+MB/s write and 800 read speeds.
BBU connected: 500 write and 350 read (and the read is stuttering). No background processed or anything else apparent in the dashboard.
Areca's initial response: "When the BBU is connected, the controller will disable the disk internal cache for best data protection. A disk without internal cache will decrease performance."
I didn't have a chance to poke around the settings yet - there's probably a way to turn the internal cache back on since to me, that's the whole point of the BBU protection - keeping the cache alive until the power is back on.
Meantime, just I wanted to see if anyone ran into a similar issue and figured it out.

I admit I have not tried results without the BBU attached. If you get me really curious, I may, but with the results I got - although the different tests showed remarkably different results, HDTune Pro, Crystal Disk Mark and AJA tests - I do not have the impression that results are negatively influenced by the BBU.
It could be a MAC specific problem, since my observations are PC / Windows based.

Similar Messages

  • Considerable speed drop with our Infinity connecti...

    Hello all,
    First time forum user, looking for some advice!
    Ok, so we had Infinity installed probably 8 months ago and have been really impressed with the speed. We've consistently gotten very high fifties for our connection, maybe 60mb or so at 2am on a Thursday!
    Lately however, our connection has dropped to around 12mb - it also seems hugely inconsistent and at the moment we're unable to buy a movie from iTunes as teh connection seems to clog up almost instantly. This situation has been ongoing for about a month or so. (no hardware or software changes at all in this period)
    So far I've tried;
    1. Resetting the Modem and Router completely, several times to no avail.
    2. Changes wireless channels, seemed to make no difference at all.
    3. Checking all connections, no issues (setup has not changed at all since installation)
    4. Tested different speed test, BT says around 10-12 - same for ThinkBroadband
    Other oddities seem to be a reduced wireless speed around the house, last week transferring stuff between my Mac and NAS was horrendous - what would cause a sudden wireless speed dropoff? Another oddity is a regualr random sign out of the PlayStation network, may or may not be related?
    In terms of hardware, I'm running the standard Inifinity setup, with a HH3. We have a number of Apple devices using the connection, and I use  Macbook Air - which I mention due to its lack of ethernet port, which seems to be a real showstopping issue last time I called the support desk - basically the chap implied I was unsupportable running a Mac..!
    So folks, where on earth do I start with this one!

    It could be a faulty Homehub. To try and establish this you will need to use a computer with an Ethernet connection to do this.
    Make a direct connection with a  computer to the modem which will eliminate the homehub. Follow this guide to do that. Use your computer as normal and run a speed test as per the link http://speedtest.btwholesale.com/ and post the results.
    Guide to eliminate Homehub:
    Step 1: Remove the homehub from the modem
    Step2: Connect your pc/laptop into the modem using LAN1 port
    Step3: Open network and sharing centre on windows and click set up a new connection or network
    Step4: Connect to the internet then click make a new connection Broadband PPPoE
    Step5: Username [email protected] and the password as BT
    Step6: connect, If it doesn't,keep pressing try again until it does.

  • Gaming App dont work. very big drop with core speed and fps.

    hello. I recently bought MSI R9 290X 4GB gaming and when i install MSI Gaming app and try to run it it shows me "The platform does not support this application.
    second when i play or test it 1080p the fps stick to 60 and more but when in game loads of people go in to one place and start fight with boss the framrate drops to 10-18 fps and GPU core speed drops from 1030MHz to 500-600Mhz. How its posible with graphic card allmost from top end in 1080p ???

    The CPU stick at max temp 64 its watercooled with 2xnoctua coolers at radiator btw it sits in fractal ARC XL so Airflow its masive in this case 2X140 Fans front 1x 140 bottom 1x 140 exh in the back at top is that rad with noctuas. with all other games is no problem Tomb Raider at full detiles 60+fps midle earth shadow of mordor the same full detiles and its smooth with high fps and gpu core speed stick to max only in GW2 it shows only when its many ppl in the same place during fight with boss the fps drops so low to 10 and gpu core speed drops too like i say before.The fight looks like in link, during normal play fps 30-80 its strange too.not with graphic card like this.i didnt try this from cd cose i dont have and dont use cd-dvdrom.i will try to get them from cd and check.

  • Having speed drop issue.

    Hi,
    I am having a speed drop issue since about this Saturday, in the night time and I dont see what the problem is?. The connection is being tested with ethernet cable straight to the HH3 and I have nothing else running in the background, no updates on the PC and all consoles are shutdown etc.. does anyone know why this is because I have never had this issue before and you will notice the speed drop downstream of about 2MB missing in the synch speed test, all tests I do I get the same results in the 22.6MB range Downstream and the uploadstream is always the same result at 2.26MB:-
    Please click on pink star to the left and say thanks if I have helped you at all!. Thank you. Home Hub Page- http://bthomehub.home/
    BT Speed test- http://www.speedtest.btwholesale.com/
    Speedtest:-http://diagnostics.bt.com/login/?workflow=Speed
    Net Connect test- http://netalyzr.icsi.berkeley.edu/index.html

    Thanks guys for the replys.
    @sjtp. Yes mate I agree maybe I should not be so concerned about the speed issue seen as though I do have a prity solid good connection for everything, its just a little annoying I am losing over 2MB somewhere, some how.
    @curiousfellow. I have done just that m8ty and found channel 3 seems to be the best for me. I do get upto 300mbps on devices and no drop. I have ran through them all and noted down speeds, traces (bbc.co.uk) and pings to speedtest.net site and channel 3 is doing me justice it seems, its just the over 2MB difference that is bugging me out.
    Can you see though guys, in my test it says 25.3MB to my modem but to my PC using ethernet to my HH3 I am gettting 22.6MB, I am losing quite alot, but why is the big question???, it is really annoying me, its not as though I am using long ethernet cables to connect to my HH3 or to my PC they are just normal length cables, actually also they are Cat 6 not 5 so there top notch ethernet cables, gold as well, I didched the BT ones for better cables!!!!. One time when I was first connected to Infinity, 6 months back I was getting around 27000kbps to my PC but that gradually went down so I went along with that cause others connected to Infinity in my area and I was one of the first houses to connect so I expected a drop but now over time it seems to be gradually getting lower and lower to my frustration!!!.
    Please click on pink star to the left and say thanks if I have helped you at all!. Thank you. Home Hub Page- http://bthomehub.home/
    BT Speed test- http://www.speedtest.btwholesale.com/
    Speedtest:-http://diagnostics.bt.com/login/?workflow=Speed
    Net Connect test- http://netalyzr.icsi.berkeley.edu/index.html

  • Massive speed drop during peak time!!

    Hi, 
    I recently switched over to BT broadband (3/11/2014) and unfortunately I have been having some major issues with download speeds during peak times. Off peak times I usually register download speeds of around 12-14Mbps, which is great, but during peak hours (11:00-14:00 and 18:00-22:00) my download speed drops to anywhere between 0.01-1.0Mbps, even on a wired connection. I fully expect speeds to drop during these hours (even though BT claimed on their website that they wouldn’t) but in no way should they even be this slow surely. The internet is completely unusable when the speeds drop as pages can take several minutes to load and I am currently paying for Netflix and Amazon Prime subscriptions that I simply can’t use because videos or streams will not load, they just constantly buffer! 
    I have been in contact with the online help chat with this issue and they simply recommended that I reset my router, and whilst this temporarily fixed the issue for a few hours, my problem soon returned. Since then I have not touched the router in over 10 days in the hope that the speeds would start to settle, and whilst off-peak times have improved, peak times are no better than before, and in some cases worse. 
    I have been patient and given the router and provider 3 weeks to settle down, but I am seeing absolutely no signs of improvement. As I said, I understand that speeds may drop during peak hours, but as it stands I’m basically losing my internet during this time. I’m starting to wonder what it is I’m paying for. I had no such trouble with my previous provider during peak hours, so I’m not sure why there is suddenly a problem.
    I am using the Home Hub 4, and here are my ADSL Stats and my test results from Sunday evening (23/11/14):
    13:58:12, 23 Nov.  ( 81.290000) DSL noise margin: 5.60 dB upstream, 6.10 dB downstream
    13:58:11, 23 Nov.  ( 80.240000) DSL line rate: 1152 Kbps upstream, 15576 Kbps downstream
    18:55:08, 23 Nov.  ( 81.160000) DSL noise margin: 6.50 dB upstream, 6.10 dB downstream
    18:55:07, 23 Nov.  ( 80.100000) DSL line rate: 1104 Kbps upstream, 15288 Kbps downstream
    After a network test on my xbox one (wired connection) I got the following: 
    7.05pm
    Download speed: 0.34Mbps
    Upload speed: 0.88 Mbps
    7.20pm
    Download speed: 0.05Mbps
    Upload speed: 0.87 Mbps
    Speedtest result:
    I have tried to get a result from the BT Speed checker, but my internet won’t even load it as of around 7-8pm 
    During the week I have been browsing the forums in an attempt to locate a possible solution and I came across this thread in which the original poster describes a problem very similar to mine. It seems that switching their line at the exchange to a less congested one seemed to alleviate the problem?
    https://community.bt.com/t5/ADSL-Copper-Broadband-Speed/Slow-Peak-time-broadband/m-p/1111272/highlig...
    Anyway, hopefully someone can help address and solve these issues as I’m starting to get a bit frustrated and beginning to regret my decision to switch providers. 
    Thanks in advance for any help, 
    Ben
    Solved!
    Go to Solution.

    Is anything showing here for your exchange http://usertools.plus.net/exchanges/mso.php
    http://usertools.plus.net/exchanges/?
    http://btbusiness.custhelp.com/app/service_status
    http://bt.custhelp.com/app/answers/detail/a_id/15036
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • FileSharing Transfer Speed Drops after sharing internet connection

    Hi Folks
    Sometimes, when I copy files via FileSharing,
    the speed drops exactly to the max. upload speed my internet connection has.
    = instead of 12 MB/s I got 600 ~700 KB/s.
    I needed a bit of work to see this connection.
    But after a while, it changes back to normal.
    However, I did share the ethernet-internet-connection from one machine via WiFi (to surf with an iPod Touch).
    Could that initiate this problem? I believe so.
    Internet-Provider is cablecom, switzerland, zurich.
    I use a Zyxel Ethernet Switch to connect  two macs with the cablecom-modem (and together).
    So Idetached the cablecom-modem from the ZyXel Switch and restarted both machines.
    Now, the copy-action via filesharing has the expected full speed. (Just no internet, of course).
    After that I connected the Cablecom-Modem again,
    restarted (PowerOff/On) the ZyXel Switch,
    and tried the same again:
    Now the speed is slow.
    It seems that I really should NOT share the Ethernet Internet Connection with WiFi
    Won't do that anymore because I often copy files from one machine to the other and this slow transfer speed kills me.
    Why is that affecting the connection between two local machines?
    How can I reset this to "normal".
    I hope there is a way to do it in OS X instead of waiting until it sets itself  to "normal" from cablecom's side.
    [ -Despite the fact that I should use a wireless router- ]
    Is there any chance that this is an issue that OS X could resolve?
    Best would probably be: the local connection between two machines should not be affected by the provider in any circumstances.
    BTW: The cablecom-modem gives - via a ZyXel Switch - both computers unique IP's and they are reachable/visible from the internet.
    Greetings from Zurich
    Alain Burki
    If my English is bad
    please forgive me

    I am doing the same thing (have tried it occasionally over the past 6 months or so and cannot install Arch because of it)...sad panda.  The downloads start fast (up to 5MB/s), then when it gets to 49% it slows all the way down until it gives up and moves to the next mirror, repeating and repeating and repeating until finally it shows:
        core is up to date
        error: failed to update extra (download library error)
        error: failed to update community (download library error)
        :: There are 51 members in group base
        :: Repository core
        Enter a selection (default=all): error: failed to prepare transaction (could not find database)
    I've tried commenting out the XferCommand and using wget but that fails even worse.
    Thank you for posting this, I am glad I am not the only one experienceing this.  I was about to give up searching and post too.

  • Speed dropped last week and hasn't recovered...

    Hi,
    So my internet speed dropped significantly last week and hasn't recovered. I'm wondering if I need a manual intervention to reset my profile but hopefully someone more ADSL-knowledgeable out there can assist. Note as a professional software engineer I'm reasonably tech savvy, and have taken all the usual steps:
    * Router is now permanently plugged into the test socket, and has been for weeks, ruling out any internal wiring
    * Have tried different routers. I found the HomeHub4 to be unstable (needing to be factory reset regularly) so am currently running with a TP-Link N600 which has been rock solid since powering on weeks ago.
    * Firmware in router up to date, no viruses or spyware on any attached devices
    * Speed checks all the same regardless of device (phone, tablet, laptop) or connection method (wired, wireless 2.4GHz, wireless 5GHz)
    * Router resets made no difference
    * Until I switched to BT a couple of months ago I had rock solid 8 to 10 megs download (definitely starting to wish I hadn't switched from Sky, although they had their own set of issues!). In fact until a week ago BT's speed had been pretty reliable, sometimes as low as 8 megs download, but sometimes up to 14 megs download.
    Here are the stats from the router:
    I have also run various speed tests (including BT and BT wholesale) which all confirm the same results. Ping times around 45ms, download speed 1.95 meg, upload speed 0.75 meg. It has been many years since I have experienced such a low internet download speed, and it is only just capable of streaming low resolution content, HD is definitely off the cards!
    Looking at the router stats that SNR Margin looks high? I'm assuming my low sync rate is due to that? However I can't see anything that has changed physically in my setup in the last week. Could be exchange-side? Also note I did the "quiet line" test by calling 17070 (option 2). No obvious noise, just a very quiet digital hiss (I'll try to get an analogue phone and do the test again). However it sounded pretty clean to my ears.
    Finally samknows tell me my exchange is 1038 metres away and I should expect at least 6.5 meg download.
    So I'm a little bewildered why I'm now having to live with such poor download speed when for at least the last 4 or 5 years I've consistently had at least 6 meg download and usually somewhere between 8 and 10 meg (and as you can see from the router stats it was as high as 14 meg since the router was powered on).
    If I could upgrade to Infinity or Virgin cable I would do so in a heartbeat but sadly neither are in my street. I was hoping that with a few days of stable connection my speed would increase but this hasn't happened. Any assistance or advice on the above would be very much appreciated.
    Cheers,
    Tich
    Solved!
    Go to Solution.

    Hi,
    Many thanks - I had no awareness of "banded" profiles before! Sadly I just did a last-ditch router reset this morning to see if it would assist (before posting here). Previously it had been up for 5+ days with no resets, and a very stable (but slow!) 2 meg download speed. My current connection time is 0 day(s) 01:11:18 so obviously far less than 3 to 5 days. Willing to wait another 3 to 5 days to see if it improves, but I did that last week to no avail (kicking myself for not screen grabbing my uptime prior to resetting this morning now!).
    Is there anything else I should do other than wait another 3 to 5 days and post again confirming a continuation of the problem?
    Cheers,
    Tich

  • Speed drops- can anyone help me please?

    I had a consistent speed of 1 MB when I got Broadband, not marvelous but bearable.  In the past year I have had my speed  drop, go through the process of the idiots with the scripts even though I have told them the same at least 10 times previously, the speed drops to 0.47 MB, they do all the stuff checks then say there is a line problem and my profile needs redoing.  The speed has risen then to 0.7 MB and never again reached 1 MB, but after a few weeks drops to 0.47 again.  I am 99% sure that BT are " robbing Peter to pay Paul" in the area, adding more people to a network using old wires and BT with all their billions of profit won’t spend a bit on adding a bit more sophistication. In answer to my question why am I not getting 1MB, I have had replies like “ it happens”, they have tried to sell me the thing where you pay a monthly fee to look at my computer, ( My computer is well protected and cleaned out daily) and they just treat people like we are at fault.
    So is there anyone who can help me to bypass the stupid scripted people who treat everyone like idiots and get someone to fix the speed, the stress of going through that performance is just too much for me.
     The irony is if I wanted to sign up for BT, the estimated speed available is advertised as 1 MB, are they breaking the trade description?

    Thank youu for taking the time to reply, I reset router a few hours ago in case it made a difference, not that it ever does.
    As requested here is the info:
    ADSL line status
    Connection Information
    Line state
    Connected
    Connection time
    0 days, 04:26:11
    Downstream
    896 Kbps
    Upstream
    448 Kbps
    ADSL Settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    G.992.1 Annex A
    Latency type
    Fast
    Noise margin (Down/Up)
    7.1 dB / 14.0 dB
    Line attenuation (Down/Up)
    69.2 dB / 31.5 dB
    Output power (Down/Up)
    1.3 dBm / 1.1 dBm
    Loss of Framing (Local/Remote)
    0 / 0
    Loss of Signal (Local/Remote)
    0 / 0
    Loss of Power (Local/Remote)
    0 / 0
    FEC Errors (Down/Up)
    0 / 8
    CRC Errors (Down/Up)
    2774 / 131
    HEC Errors (Down/Up)
    2315 / 16
    Error Seconds (Local/Remote)
    994 / 130
    BT speed test has never worked for me, result from elsewhere:

  • Speed problems with new Airport Extreme

    Hi,
    I just bought the latest Airport Extreme, and am using it as my router directly from my internet provider, a hole in the wall, with a normal cable between.
    If I hook the cable right to my computer I get between 500-800 Mbit speed, all the time, rock solid, so my internet connection is very good!
    Now, when I hook it up to my new AE, it works fine most of the time, or let's say 70% of the time. The other 30% the speed drops down to roughly 20-50 Mbit from the normal 250-400 speed when using the AE. Itäs not only that the speed drops, all my streaming devices stop working. I have three wireless speakers and an Apple TV. Normally it all works fine... but suddenly they all stop working, and that is when the router (AE) drops in speed.
    Sometimes I have to plugg the plug on the AE, to restart it, and it works fine agaian, but sometimes ther's nothing to do.
    It feels very strange that you one minute can have 400+ Mbit and then sudenly down to 20, and then back again...without doing anything at all in your apartment with your devices. I run on the 7.7.2 firmware...
    Any clues?

    I've got a similar sounding issue except when it happens to mine, it stays super slow until I reboot the AE. Not just changes some settings and let it update/refresh, I have to power cycle it. My internet connection isn't quite as fast as yours but it still should be a lot faster than what it is when this starts.
    I have a 30Mbit connection. After power cycling the AE, it runs fine for several days. Then at some point, it gets extremely slow. Trying to load any web page takes roughly 30-45 seconds sometimes before it really seems like it starts getting a response from the server and starts downloading the page. I've tried a few pings and the requests continually time out for a while and then it will finally pick up and work.
    I'm not real sure what to do about it. I'm wondering if the newest firmware upgrade has anything to do with it. I didn't see this issue until after updating to 7.7.2. May be completely unrelated but thats the only thing I can think of that has changed lately.

  • Broadband Speed dropped and wont come back

    Hi, I need help and advice please.
    Background info first though, so please bare with me.
    During last July 2011 I was fed up of very low speeds and managed to get a BT engineer out to check the wiring etc... He did a great job by finding a badly insulated cable between myself and the Cabinet in our village. He also changed our master socket to a newer version.
    Over the next few days my broadband speed went from 0.74mb download to 1.95mb download. Fantastic!
    This speed has pretty much been a consistent rarely dropping below 1.7mb and at times has even gone up to my highest recorded of 2.46mb. I thought this was brilliant, I could watch iPlayer no problems and xbox live was even bearable (most of the time).
    The big problem where I live is sometimes we have power cuts. Sometimes lasting hours but mainly just for seconds. Even so it switches the BB router off. (I know, but not my fault)
    When we had the freak snow fall the other month problems started to raise their head. The computers in the household found issues connecting to the router and to resolve this BT BB Helpdesk kept advising me to reset router to enable connection. After connecting new ADSL filters the speed returned but connection issues continued.
    BT supplied me with a brand new home hub 3 which I connected thinking it would give me my 2.4mb speeds again. Oh No. To be fare I think I was getting 1.95mb but I wanted more, as most people would. Why cant I get 2.4mb most of the time I have had for a few months.
    Anyway I contacted BT who were kind enough to send a BT engineer out. He Said to me the Broadband speed is put out at the exchange (4.5km) at 8mb and comes into our village at between 3mb and 4mb. He detected no fault on the lines and spent the next 3 hours renewing 'D' and 'E' I think side of cabling (found this out later). He mentioned the noise was high but did something to lower it. On leaving he said I had 2.5mb and was confidant it would rise to 3mb.
    Great not drastic but should give me 250kbs to 50kbs extra.
    The day he was at my house we had 2 short power cuts followed by another couple some days later. This has not helped I'm sure.
    NOW TO THE ISSUE.
    My download speed since that day has not gone above 1.46mb download and every time I speak to the call centre they tell me my line is only capable of 2mb therefore 1.46mb is within acceptable range.
    I am so tired of explaining that I was capable of receiving 2.4mb some 2 months ago yet now since the new hub 3 and line fiddling I am only capable of a 2mb downstream - 1.46mb DLS.
    I know I have to wait 3 - 10 days but with power cuts its a nightmare, and they are so adamant about my 2mb downstream limit What the hell has happened.
    Here is a link to my recorded (Speedtest.net) data over the past 11 months showing actual proof of receiving 2.46mb:
    http://www.speedtest.net/results.php?sh=19a6b38248773feaa954bcf8e17ae768&ria=0
    And here is my BT speedtester data:
    1. Best Effort Test: -provides background information.
    Download  Speed
    1.38 Mbps
    0 Mbps
    2 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 1.38 Mbps
     For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
     Additional Information:
     Your DSL Connection Rate :2.21 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 1.5 Mbps
    My home Hub data:
    Line state:
    Connected
    Connection time:
    0 day, 17:16:04
    Downstream:
    2,208 Kbps
    Upstream:
    448 Kbps
      ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    9.3 dB / 15.0 dB
    Line attenuation (Down/Up):
    56.5 dB / 31.5 dB
    Output power (Down/Up):
    18.1 dBm / 11.9 dBm
    FEC Events (Down/Up):
    12650 / 48
    CRC Events (Down/Up):
    50 / 17
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    289 / 10
    Error Seconds (Local/Remote):
    0 / 0
    Please Help me I know I've had better than this but all the numbers point to the fact I can no longer have them. Why?
    Many thanks
    Jon
    Solved!
    Go to Solution.

    Hi JONNYYOUNG,
    I'm not educated enough to help but it mat reassure you, as it did me, to know your circumstances are not unique.
    Your story sounds very simialr to my experiende last November, speeds and line length being very similar.  An engineer said there was noise on my line so he switched me to another pair.  Did the engineer do that for you too ? Net result my speed dropped from ~2.3 to ~1.4Mbps. 
    Fortunately a 21CN upgrade at my excahnge has brought my speed back up to ~2.4Mbps.
    I'm sure imjolly, john46 and maybe a mod if you need it will sort you out as well as they did me.
    Good luck,
    dfenceman 
    Best regards,
    dfenceman

  • Wireless speed dropping to 5.5Mbps

    Hi Folks,
    I like the ArchLinux distribution and have enjoyed it for a few years now.
    But recently I noticed my wifi speed dropping like crazy, I reinstalled my router (DD-WRT) but that didn't fix anything.
    So I tried something else, I booted to Windows and I found that I had normal speeds (54Mbps) during the span of an hour.
    Afterwards I rebooted back to linux, and the speed immediately dropped to 5.5Mbps
    This started about 1 or 2 weeks back, I'm guessing after some pacman update..
    Are there any regression or new bugs known which affect my performance?
    lspci:
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
    00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
    00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)
    02:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 02)
    10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    18:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
    lsmod | grep iw :
    iwl3945 66405 0
    iwl_legacy 45666 1 iwl3945
    mac80211 189758 2 iwl3945,iwl_legacy
    cfg80211 126962 3 iwl3945,iwl_legacy,mac80211
    lsmod:
    Module Size Used by
    cryptd 6901 0
    aes_i586 6948 1
    aes_generic 25678 1 aes_i586
    coretemp 4374 0
    btusb 9897 0
    bluetooth 115465 1 btusb
    arc4 1094 2
    ecb 1645 2
    iwl3945 66405 0
    i915 557262 3
    snd_hda_codec_analog 62068 1
    iwl_legacy 45666 1 iwl3945
    snd_hda_intel 19261 3
    snd_hda_codec 66793 2 snd_hda_codec_analog,snd_hda_intel
    mac80211 189758 2 iwl3945,iwl_legacy
    drm_kms_helper 24245 1 i915
    snd_hwdep 4919 1 snd_hda_codec
    pcmcia 31566 0
    drm 147653 4 i915,drm_kms_helper
    snd_pcm 60311 2 snd_hda_intel,snd_hda_codec
    joydev 7535 0
    tpm_infineon 6770 0
    cfg80211 126962 3 iwl3945,iwl_legacy,mac80211
    psmouse 55927 0
    sg 21022 0
    uhci_hcd 19344 0
    intel_agp 8664 1 i915
    ehci_hcd 34847 0
    ppdev 4822 0
    firewire_ohci 25683 0
    snd_timer 15542 1 snd_pcm
    tg3 113936 0
    i2c_algo_bit 4431 1 i915
    parport_pc 27902 0
    firewire_core 43390 1 firewire_ohci
    iTCO_wdt 10333 0
    snd 43527 12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    intel_gtt 11417 3 i915,intel_agp
    usbcore 119004 4 btusb,uhci_hcd,ehci_hcd
    parport 26107 2 ppdev,parport_pc
    agpgart 22160 3 drm,intel_agp,intel_gtt
    yenta_socket 18846 0
    soundcore 5018 1 snd
    snd_page_alloc 5909 2 snd_hda_intel,snd_pcm
    crc_itu_t 1077 1 firewire_core
    evdev 7310 13
    i2c_core 16665 4 i915,drm_kms_helper,drm,i2c_algo_bit
    pcmcia_rsrc 8816 1 yenta_socket
    iTCO_vendor_support 1553 1 iTCO_wdt
    pcmcia_core 10154 3 pcmcia,yenta_socket,pcmcia_rsrc
    libphy 14053 1 tg3
    hp_accel 12892 0
    lis3lv02d 8712 1 hp_accel
    serio_raw 3430 0
    pcspkr 1415 0
    thermal 6603 0
    hp_wmi 6602 0
    container 1937 0
    input_polldev 2446 1 lis3lv02d
    sparse_keymap 2636 1 hp_wmi
    fan 1910 0
    rfkill 12510 3 bluetooth,cfg80211,hp_wmi
    tpm_tis 6389 0
    tpm 10037 2 tpm_infineon,tpm_tis
    tpm_bios 4237 1 tpm
    video 9852 1 i915
    wmi 7367 1 hp_wmi
    battery 8905 0
    ac 2545 0
    button 3654 1 i915
    cpufreq_powersave 714 0
    cpufreq_conservative 4325 2
    cpufreq_ondemand 5064 0
    acpi_cpufreq 5053 1
    freq_table 2055 2 cpufreq_ondemand,acpi_cpufreq
    processor 21884 3 acpi_cpufreq
    mperf 1035 1 acpi_cpufreq
    vboxdrv 177483 0
    fuse 58669 3
    ext4 334626 3
    mbcache 4321 1 ext4
    jbd2 59098 1 ext4
    crc16 1077 2 bluetooth,ext4
    sd_mod 25515 5
    sr_mod 12956 0
    cdrom 31341 1 sr_mod
    ahci 18093 5
    pata_acpi 2396 0
    libahci 16581 1 ahci
    ata_piix 18569 0
    libata 154349 4 ahci,pata_acpi,libahci,ata_piix
    scsi_mod 110670 4 sg,sd_mod,sr_mod,libata
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 7 05:49:02 UTC 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf7b0000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf7b0000 - 00000000bf7c5400 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf7c5400 - 00000000bf7e7fb8 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf7e7fb8 - 00000000c0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Hewlett-Packard HP Compaq 6710b (GR680ET#ABH)/30C0, BIOS 68DDU Ver. F.10 01/11/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0xbf7b0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable
    [ 0.000000] 3 base 0FEDA0000 mask FFFFE0000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7fe38000 - 7fff0000
    [ 0.000000] Allocated new RAMDISK: 37646000 - 377fd9b5
    [ 0.000000] Move RAMDISK from 000000007fe38000 - 000000007ffef9b4 to 37646000 - 377fd9b4
    [ 0.000000] ACPI: RSDP 000f7150 00024 (v02 HP )
    [ 0.000000] ACPI: XSDT bf7c81cc 00084 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: FACP bf7c8084 000F4 (v04 HP 30C0 00000003 HP 00000001)
    [ 0.000000] ACPI: DSDT bf7c84d8 1313E (v01 HP nc75xx 00010000 MSFT 03000001)
    [ 0.000000] ACPI: FACS bf7e7d80 00040
    [ 0.000000] ACPI: SLIC bf7c8250 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: HPET bf7c83c8 00038 (v01 HP 30C0 00000001 HP 00000001)
    [ 0.000000] ACPI: APIC bf7c8400 00068 (v01 HP 30C0 00000001 HP 00000001)
    [ 0.000000] ACPI: MCFG bf7c8468 0003C (v01 HP 30C0 00000001 HP 00000001)
    [ 0.000000] ACPI: TCPA bf7c84a4 00032 (v02 HP 30C0 00000001 HP 00000001)
    [ 0.000000] ACPI: SSDT bf7db616 00059 (v01 HP HPQNLP 00000001 MSFT 03000001)
    [ 0.000000] ACPI: SSDT bf7db66f 00328 (v01 HP HPQSAT 00000001 MSFT 03000001)
    [ 0.000000] ACPI: SSDT bf7db997 0017D (v01 HP HPQMRM 00000001 MSFT 03000001)
    [ 0.000000] ACPI: SSDT bf7dc4da 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
    [ 0.000000] ACPI: SSDT bf7dc739 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
    [ 0.000000] ACPI: SSDT bf7dc7df 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 2175MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x000bf7b0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000bf7b0
    [ 0.000000] On node 0 totalpages: 784191
    [ 0.000000] free_area_init_node: node 0, pgdat c14a3980, node_mem_map f5e55200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 4352 pages used for memmap
    [ 0.000000] HighMem zone: 552626 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5800000 s27648 r0 d21504 u2097152
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u2097152 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778063
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/d923fdbe-d6a8-4d2b-ab88-c36fcf8609bd resume=/dev/disk/by-uuid/1bdc571f-0c58-4972-91ba-3dddae8434d6 ro i915.modeset=1
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 12548608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf7b0)
    [ 0.000000] Memory: 3091000k/3137216k available (3380k kernel code, 45764k reserved, 1394k data, 524k init, 2227912k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14aa000 - 0xc152d000 ( 524 kB)
    [ 0.000000] .data : 0xc134d1bf - 0xc14a9c00 (1394 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134d1bf (3380 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f480c000 soft=f480e000
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1995.171 MHz processor.
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.60 BogoMIPS (lpj=6650570)
    [ 0.003456] pid_max: default: 32768 minimum: 301
    [ 0.003553] Security Framework initialized
    [ 0.003616] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003695] Mount-cache hash table entries: 512
    [ 0.003948] Initializing cgroup subsys ns
    [ 0.006672] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.006747] Initializing cgroup subsys cpuacct
    [ 0.006816] Initializing cgroup subsys memory
    [ 0.006883] Initializing cgroup subsys devices
    [ 0.006942] Initializing cgroup subsys freezer
    [ 0.007001] Initializing cgroup subsys net_cls
    [ 0.007060] Initializing cgroup subsys blkio
    [ 0.007154] CPU: Physical Processor ID: 0
    [ 0.007213] CPU: Processor Core ID: 0
    [ 0.007272] mce: CPU supports 6 MCE banks
    [ 0.007335] CPU0: Thermal monitoring handled by SMI
    [ 0.007339] using mwait in idle threads.
    [ 0.008424] ACPI: Core revision 20110316
    [ 0.016678] ftrace: allocating 15225 entries in 30 pages
    [ 0.020043] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.020444] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056096] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
    [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.056663] PEBS disabled due to CPU errata.
    [ 0.056663] ... version: 2
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 2
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 000000007fffffff
    [ 0.056663] ... fixed-purpose events: 3
    [ 0.056663] ... event mask: 0000000700000003
    [ 0.073434] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100007] CPU 1 irqstacks, hard=f48c8000 soft=f48ca000
    [ 0.100009] Booting Node 0, Processors #1 Ok.
    [ 0.100111] smpboot cpu 1: start_ip = 9b000
    [ 0.006666] Initializing CPU#1
    [ 0.006666] CPU1: Thermal monitoring handled by SMI
    [ 0.196682] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.203325] Brought up 2 CPUs
    [ 0.203383] Total of 2 processors activated (7983.85 BogoMIPS).
    [ 0.204342] devtmpfs: initialized
    [ 0.204342] PM: Registering ACPI NVS region at bf7c5400 (142264 bytes)
    [ 0.204342] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
    [ 0.204576] print_constraints: dummy:
    [ 0.204692] NET: Registered protocol family 16
    [ 0.204864] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.204937] ACPI: bus type pci registered
    [ 0.205089] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.205165] PCI: not using MMCONFIG
    [ 0.207646] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
    [ 0.207708] PCI: Using configuration type 1 for base access
    [ 0.208277] bio: create slab <bio-0> at 0
    [ 0.210299] ACPI: EC: Look up EC in DSDT
    [ 0.253363] ACPI: SSDT bf7dbbdc 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
    [ 0.253972] ACPI: Dynamic OEM Table Load:
    [ 0.254117] ACPI: SSDT (null) 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
    [ 0.254418] ACPI: SSDT bf7dbee0 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
    [ 0.255665] ACPI: Dynamic OEM Table Load:
    [ 0.255810] ACPI: SSDT (null) 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
    [ 0.256209] ACPI: SSDT bf7dbb14 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
    [ 0.256814] ACPI: Dynamic OEM Table Load:
    [ 0.256959] ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
    [ 0.257214] ACPI: SSDT bf7dbe5b 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
    [ 0.257803] ACPI: Dynamic OEM Table Load:
    [ 0.257949] ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
    [ 0.290050] ACPI: Interpreter enabled
    [ 0.290115] ACPI: (supports S0 S3 S4 S5)
    [ 0.290361] ACPI: Using IOAPIC for interrupt routing
    [ 0.290441] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.291123] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
    [ 0.291198] PCI: Using MMCONFIG for extended config space
    [ 0.294937] ACPI: Power Resource [C27F] (on)
    [ 0.295774] ACPI: Power Resource [C29B] (on)
    [ 0.299470] ACPI: Power Resource [C1C5] (off)
    [ 0.301813] ACPI: Power Resource [C3BC] (off)
    [ 0.301942] ACPI: Power Resource [C3BD] (off)
    [ 0.302067] ACPI: Power Resource [C3BE] (off)
    [ 0.302193] ACPI: Power Resource [C3BF] (off)
    [ 0.302318] ACPI: Power Resource [C3C0] (off)
    [ 0.303130] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 0.303481] ACPI: No dock devices found.
    [ 0.303540] HEST: Table not found.
    [ 0.303600] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.306875] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
    [ 0.313394] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.313457] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.313520] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.313593] pci_root PNP0A08:00: host bridge window [mem 0xbf800000-0xfedfffff]
    [ 0.313666] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
    [ 0.313739] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.313824] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
    [ 0.313871] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
    [ 0.313886] pci 0000:00:02.0: reg 10: [mem 0xe4600000-0xe46fffff 64bit]
    [ 0.313896] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.313903] pci 0000:00:02.0: reg 20: [io 0x4000-0x4007]
    [ 0.313938] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
    [ 0.313951] pci 0000:00:02.1: reg 10: [mem 0xe4700000-0xe47fffff 64bit]
    [ 0.314042] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [ 0.314102] pci 0000:00:1a.0: reg 20: [io 0x4020-0x403f]
    [ 0.314144] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [ 0.314204] pci 0000:00:1a.1: reg 20: [io 0x4040-0x405f]
    [ 0.314261] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [ 0.314287] pci 0000:00:1a.7: reg 10: [mem 0xe4800000-0xe48003ff]
    [ 0.314382] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.314388] pci 0000:00:1a.7: PME# disabled
    [ 0.314418] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [ 0.314442] pci 0000:00:1b.0: reg 10: [mem 0xe4804000-0xe4807fff 64bit]
    [ 0.314531] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.314536] pci 0000:00:1b.0: PME# disabled
    [ 0.314566] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [ 0.314655] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.314660] pci 0000:00:1c.0: PME# disabled
    [ 0.314693] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
    [ 0.314785] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.314790] pci 0000:00:1c.1: PME# disabled
    [ 0.314823] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
    [ 0.314915] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.314920] pci 0000:00:1c.2: PME# disabled
    [ 0.314954] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
    [ 0.315045] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.315050] pci 0000:00:1c.4: PME# disabled
    [ 0.315083] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [ 0.315143] pci 0000:00:1d.0: reg 20: [io 0x4060-0x407f]
    [ 0.315185] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [ 0.315244] pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f]
    [ 0.315286] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [ 0.315345] pci 0000:00:1d.2: reg 20: [io 0x40a0-0x40bf]
    [ 0.315401] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [ 0.315427] pci 0000:00:1d.7: reg 10: [mem 0xe4808000-0xe48083ff]
    [ 0.315521] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.315527] pci 0000:00:1d.7: PME# disabled
    [ 0.315554] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.315645] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
    [ 0.315763] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.315841] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
    [ 0.315907] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
    [ 0.315986] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
    [ 0.316100] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
    [ 0.316118] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.316131] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.316144] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.316157] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.316170] pci 0000:00:1f.1: reg 20: [io 0x40c0-0x40cf]
    [ 0.316225] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
    [ 0.316253] pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7]
    [ 0.316266] pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7]
    [ 0.316279] pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377]
    [ 0.316292] pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577]
    [ 0.316304] pci 0000:00:1f.2: reg 20: [io 0x4100-0x411f]
    [ 0.316317] pci 0000:00:1f.2: reg 24: [mem 0xe4809000-0xe48097ff]
    [ 0.316368] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.316373] pci 0000:00:1f.2: PME# disabled
    [ 0.316459] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
    [ 0.316523] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.316529] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.316538] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.316706] pci 0000:10:00.0: [8086:4222] type 0 class 0x000280
    [ 0.316763] pci 0000:10:00.0: reg 10: [mem 0xe4100000-0xe4100fff]
    [ 0.317108] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
    [ 0.317121] pci 0000:10:00.0: PME# disabled
    [ 0.317225] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
    [ 0.317289] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.317295] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
    [ 0.317303] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.317441] pci 0000:18:00.0: [14e4:1693] type 0 class 0x000200
    [ 0.317474] pci 0000:18:00.0: reg 10: [mem 0xe4000000-0xe400ffff 64bit]
    [ 0.317618] pci 0000:18:00.0: PME# supported from D3hot D3cold
    [ 0.317624] pci 0000:18:00.0: PME# disabled
    [ 0.317669] pci 0000:00:1c.2: PCI bridge to [bus 18-18]
    [ 0.317733] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.317739] pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff]
    [ 0.317747] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.317813] pci 0000:00:1c.4: PCI bridge to [bus 28-28]
    [ 0.317876] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
    [ 0.317882] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
    [ 0.317890] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.317950] pci 0000:02:04.0: [1180:0476] type 2 class 0x000607
    [ 0.317980] pci 0000:02:04.0: reg 10: [mem 0xe4200000-0xe4200fff]
    [ 0.318011] pci 0000:02:04.0: supports D1 D2
    [ 0.318014] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.318020] pci 0000:02:04.0: PME# disabled
    [ 0.318049] pci 0000:02:04.1: [1180:0832] type 0 class 0x000c00
    [ 0.318077] pci 0000:02:04.1: reg 10: [mem 0xe4201000-0xe42017ff]
    [ 0.318189] pci 0000:02:04.1: supports D1 D2
    [ 0.318191] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.318197] pci 0000:02:04.1: PME# disabled
    [ 0.318276] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
    [ 0.318342] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.318348] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff]
    [ 0.318357] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.318360] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.318362] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.318365] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.318368] pci 0000:00:1e.0: bridge window [mem 0xbf800000-0xfedfffff] (subtractive decode)
    [ 0.318371] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
    [ 0.318373] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.318431] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
    [ 0.318540] pci_bus 0000:00: on NUMA node 0
    [ 0.318544] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
    [ 0.318789] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
    [ 0.318876] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
    [ 0.318931] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
    [ 0.318991] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
    [ 0.319052] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
    [ 0.319149] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.319210] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.337338] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5
    [ 0.337702] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
    [ 0.338019] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
    [ 0.338329] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled.
    [ 0.338733] ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
    [ 0.339050] ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
    [ 0.339358] ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled.
    [ 0.339713] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20110316/pci_link-184)
    [ 0.339986] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.340072] vgaarb: loaded
    [ 0.340231] PCI: Using ACPI for IRQ routing
    [ 0.341816] PCI: pci_cache_line_size set to 64 bytes
    [ 0.341936] Expanded resource reserved due to conflict with PCI Bus 0000:00
    [ 0.342000] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.342003] reserve RAM buffer: 00000000bf7b0000 - 00000000bfffffff
    [ 0.342124] NetLabel: Initializing
    [ 0.342182] NetLabel: domain hash size = 128
    [ 0.342241] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.342313] NetLabel: unlabeled traffic allowed by default
    [ 0.342386] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.342454] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.342687] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.359996] Switching to clocksource hpet
    [ 0.363130] Switched to NOHz mode on CPU #0
    [ 0.363227] Switched to NOHz mode on CPU #1
    [ 0.367148] pnp: PnP ACPI init
    [ 0.367232] ACPI: bus type pnp registered
    [ 0.367404] pnp 00:00: [mem 0x00000000-0x0009ffff]
    [ 0.367407] pnp 00:00: [mem 0x000e0000-0x000fffff]
    [ 0.367409] pnp 00:00: [mem 0x00100000-0xbf7fffff]
    [ 0.367477] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.367541] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.367605] system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved
    [ 0.367670] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.370899] pnp 00:01: [bus 00-ff]
    [ 0.370902] pnp 00:01: [io 0x0cf8-0x0cff]
    [ 0.370905] pnp 00:01: [io 0x0000-0x0cf7 window]
    [ 0.370907] pnp 00:01: [io 0x0d00-0xffff window]
    [ 0.370910] pnp 00:01: [mem 0x000a0000-0x000bffff window]
    [ 0.370912] pnp 00:01: [mem 0xbf800000-0xfedfffff window]
    [ 0.370915] pnp 00:01: [mem 0xfee01000-0xffffffff window]
    [ 0.370917] pnp 00:01: [mem 0x000d0000-0x000dffff window]
    [ 0.371021] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.371604] pnp 00:02: [io 0x0378-0x037f]
    [ 0.371607] pnp 00:02: [io 0x0778-0x077a]
    [ 0.371619] pnp 00:02: [irq 7]
    [ 0.371622] pnp 00:02: [dma 1]
    [ 0.371722] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.371803] pnp 00:03: [io 0x0560-0x056f]
    [ 0.371806] pnp 00:03: [io 0x0570-0x057f]
    [ 0.371808] pnp 00:03: [mem 0xfed40000-0xfed44fff]
    [ 0.371843] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
    [ 0.371854] pnp 00:04: [io 0x00f0-0x00ff]
    [ 0.371860] pnp 00:04: [irq 13]
    [ 0.371893] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.371905] pnp 00:05: [io 0x0000-0x000f]
    [ 0.371908] pnp 00:05: [io 0x0080-0x008f]
    [ 0.371910] pnp 00:05: [io 0x00c0-0x00df]
    [ 0.371912] pnp 00:05: [dma 4]
    [ 0.371945] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.371954] pnp 00:06: [io 0x0061]
    [ 0.371988] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.371998] pnp 00:07: [io 0x0070-0x0071]
    [ 0.372000] pnp 00:07: [io 0x0072-0x0073]
    [ 0.372006] pnp 00:07: [irq 8]
    [ 0.372045] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.372112] pnp 00:08: [mem 0xfed00000-0xfed003ff]
    [ 0.372148] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.372159] pnp 00:09: [io 0x0060]
    [ 0.372161] pnp 00:09: [io 0x0064]
    [ 0.372167] pnp 00:09: [irq 1]
    [ 0.372202] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.372215] pnp 00:0a: [irq 12]
    [ 0.372255] pnp 00:0a: Plug and Play ACPI device, IDs SYN0134 SYN0100 SYN0002 PNP0f13 (active)
    [ 0.372387] pnp 00:0b: [io 0x0010-0x001f]
    [ 0.372390] pnp 00:0b: [io 0x0024-0x003f]
    [ 0.372392] pnp 00:0b: [io 0x004e-0x004f]
    [ 0.372394] pnp 00:0b: [io 0x0050-0x0053]
    [ 0.372396] pnp 00:0b: [io 0x0063]
    [ 0.372398] pnp 00:0b: [io 0x0065]
    [ 0.372400] pnp 00:0b: [io 0x0067]
    [ 0.372402] pnp 00:0b: [io 0x0074-0x0077]
    [ 0.372404] pnp 00:0b: [io 0x0090-0x009f]
    [ 0.372406] pnp 00:0b: [io 0x00a4-0x00bd]
    [ 0.372408] pnp 00:0b: [io 0x0500-0x055f]
    [ 0.372411] pnp 00:0b: [io 0x0800-0x080f]
    [ 0.372413] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
    [ 0.372415] pnp 00:0b: [mem 0xfff00000-0xffffffff]
    [ 0.372486] system 00:0b: [io 0x0500-0x055f] has been reserved
    [ 0.372549] system 00:0b: [io 0x0800-0x080f] has been reserved
    [ 0.372611] system 00:0b: [mem 0xffb00000-0xffbfffff] has been reserved
    [ 0.372674] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
    [ 0.372737] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.373400] pnp 00:0c: [irq 23]
    [ 0.373462] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 0.373485] pnp 00:0d: [io 0x04d0-0x04d1]
    [ 0.373487] pnp 00:0d: [io 0x1000-0x107f]
    [ 0.373490] pnp 00:0d: [io 0x1100-0x113f]
    [ 0.373492] pnp 00:0d: [io 0x1200-0x121f]
    [ 0.373494] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
    [ 0.373497] pnp 00:0d: [mem 0xfec00000-0xfec000ff]
    [ 0.373499] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
    [ 0.373501] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
    [ 0.373503] pnp 00:0d: [mem 0xfed90000-0xfed99fff]
    [ 0.373589] system 00:0d: [io 0x04d0-0x04d1] has been reserved
    [ 0.373651] system 00:0d: [io 0x1000-0x107f] has been reserved
    [ 0.373713] system 00:0d: [io 0x1100-0x113f] has been reserved
    [ 0.373775] system 00:0d: [io 0x1200-0x121f] has been reserved
    [ 0.373837] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.373900] system 00:0d: [mem 0xfec00000-0xfec000ff] could not be reserved
    [ 0.373964] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.374027] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.374090] system 00:0d: [mem 0xfed90000-0xfed99fff] has been reserved
    [ 0.374153] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.375020] pnp 00:0e: [mem 0x000cee00-0x000cffff]
    [ 0.375024] pnp 00:0e: [mem 0xfeda0000-0xfedbffff]
    [ 0.375026] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
    [ 0.375112] system 00:0e: [mem 0x000cee00-0x000cffff] has been reserved
    [ 0.375176] system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
    [ 0.375238] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.375302] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.375317] pnp: PnP ACPI: found 15 devices
    [ 0.375376] ACPI: ACPI bus type pnp unregistered
    [ 0.411992] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
    [ 0.412067] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.412130] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc4000000-0xc41fffff 64bit pref]
    [ 0.412205] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc4200000-0xc43fffff 64bit pref]
    [ 0.412279] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
    [ 0.412342] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc4400000-0xc45fffff 64bit pref]
    [ 0.412417] pci 0000:00:1c.1: BAR 13: assigned [io 0x7000-0x7fff]
    [ 0.412479] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
    [ 0.412540] pci 0000:00:1c.0: bridge window [io disabled]
    [ 0.412604] pci 0000:00:1c.0: bridge window [mem disabled]
    [ 0.412667] pci 0000:00:1c.0: bridge window [mem pref disabled]
    [ 0.412734] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
    [ 0.412796] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff]
    [ 0.412862] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
    [ 0.412928] pci 0000:00:1c.1: bridge window [mem 0xc4400000-0xc45fffff 64bit pref]
    [ 0.413007] pci 0000:00:1c.2: PCI bridge to [bus 18-18]
    [ 0.413069] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
    [ 0.413135] pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff]
    [ 0.413200] pci 0000:00:1c.2: bridge window [mem 0xc4200000-0xc43fffff 64bit pref]
    [ 0.413280] pci 0000:00:1c.4: PCI bridge to [bus 28-28]
    [ 0.413353] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
    [ 0.413419] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
    [ 0.413484] pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xc41fffff 64bit pref]
    [ 0.413565] pci 0000:02:04.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
    [ 0.413639] pci 0000:02:04.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
    [ 0.413702] pci 0000:02:04.0: BAR 13: assigned [io 0x5000-0x50ff]
    [ 0.413763] pci 0000:02:04.0: BAR 14: assigned [io 0x5400-0x54ff]
    [ 0.413825] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
    [ 0.413886] pci 0000:02:04.0: bridge window [io 0x5000-0x50ff]
    [ 0.413952] pci 0000:02:04.0: bridge window [io 0x5400-0x54ff]
    [ 0.414017] pci 0000:02:04.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
    [ 0.414093] pci 0000:02:04.0: bridge window [mem 0xc8000000-0xcbffffff]
    [ 0.414159] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
    [ 0.414221] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
    [ 0.414287] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff]
    [ 0.414353] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
    [ 0.414442] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.414508] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.414518] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.414583] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.414593] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.414658] pci 0000:00:1c.2: setting latency timer to 64
    [ 0.414666] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.414732] pci 0000:00:1c.4: setting latency timer to 64
    [ 0.414741] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.414751] pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.414818] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.414821] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.414823] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.414826] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xfedfffff]
    [ 0.414828] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
    [ 0.414831] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff]
    [ 0.414834] pci_bus 0000:10: resource 0 [io 0x7000-0x7fff]
    [ 0.414836] pci_bus 0000:10: resource 1 [mem 0xe4100000-0xe41fffff]
    [ 0.414839] pci_bus 0000:10: resource 2 [mem 0xc4400000-0xc45fffff 64bit pref]
    [ 0.414842] pci_bus 0000:18: resource 0 [io 0x6000-0x6fff]
    [ 0.414844] pci_bus 0000:18: resource 1 [mem 0xe4000000-0xe40fffff]
    [ 0.414847] pci_bus 0000:18: resource 2 [mem 0xc4200000-0xc43fffff 64bit pref]
    [ 0.414849] pci_bus 0000:28: resource 0 [io 0x2000-0x3fff]
    [ 0.414852] pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff]
    [ 0.414855] pci_bus 0000:28: resource 2 [mem 0xc4000000-0xc41fffff 64bit pref]
    [ 0.414857] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
    [ 0.414860] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe45fffff]
    [ 0.414862] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc3ffffff pref]
    [ 0.414865] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
    [ 0.414867] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
    [ 0.414870] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.414872] pci_bus 0000:02: resource 7 [mem 0xbf800000-0xfedfffff]
    [ 0.414875] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
    [ 0.414877] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff]
    [ 0.414880] pci_bus 0000:03: resource 0 [io 0x5000-0x50ff]
    [ 0.414882] pci_bus 0000:03: resource 1 [io 0x5400-0x54ff]
    [ 0.414885] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc3ffffff pref]
    [ 0.414887] pci_bus 0000:03: resource 3 [mem 0xc8000000-0xcbffffff]
    [ 0.414935] NET: Registered protocol family 2
    [ 0.415062] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.415368] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.415894] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.416143] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.416205] TCP reno registered
    [ 0.416264] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.416330] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.416507] NET: Registered protocol family 1
    [ 0.416583] pci 0000:00:02.0: Boot video device
    [ 0.416785] PCI: CLS 64 bytes, default 64
    [ 0.416838] Unpacking initramfs...
    [ 0.451007] Freeing initrd memory: 1760k freed
    [ 0.452054] apm: BIOS not found.
    [ 0.452259] audit: initializing netlink socket (disabled)
    [ 0.452332] type=2000 audit(1308999272.449:1): initialized
    [ 0.452758] highmem bounce pool size: 64 pages
    [ 0.452821] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.455200] VFS: Disk quotas dquot_6.5.2
    [ 0.455344] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.455524] msgmni has been set to 1689
    [ 0.455791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.456544] io scheduler noop registered
    [ 0.456604] io scheduler deadline registered
    [ 0.456686] io scheduler cfq registered (default)
    [ 0.456882] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.456945] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.457031] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 0.457087] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.457173] pcieport 0000:00:1c.2: setting latency timer to 64
    [ 0.457229] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.457316] pcieport 0000:00:1c.4: setting latency timer to 64
    [ 0.457371] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
    [ 0.457576] intel_idle: MWAIT substates: 0x22220
    [ 0.457578] intel_idle: does not run on family 6 model 15
    [ 0.457584] ERST: Table is not found!
    [ 0.457656] isapnp: Scanning for PnP cards...
    [ 0.814935] isapnp: No Plug & Play device found
    [ 0.815057] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.017338] i8042: PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
    [ 1.019024] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.019854] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.019947] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.020050] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.020136] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.020222] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.020375] mousedev: PS/2 mouse device common for all mice
    [ 1.020520] rtc_cmos 00:07: RTC can wake from S4
    [ 1.041983] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.043462] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [ 1.043553] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.043640] cpuidle: using governor ladder
    [ 1.043698] cpuidle: using governor menu
    [ 1.044008] TCP cubic registered
    [ 1.044067] NET: Registered protocol family 17
    [ 1.044133] Registering the dns_resolver key type
    [ 1.044208] Using IPI No-Shortcut mode
    [ 1.044349] PM: Checking hibernation image partition /dev/disk/by-uuid/1bdc571f-0c58-4972-91ba-3dddae8434d6
    [ 1.054023] PM: Hibernation image not present or could not be loaded.
    [ 1.054029] registered taskstats version 1
    [ 1.054676] rtc_cmos 00:07: setting system clock to 2011-06-25 10:54:34 UTC (1308999274)
    [ 1.054790] Initializing network drop monitor service
    [ 1.054922] Freeing unused kernel memory: 524k freed
    [ 1.055268] Write protecting the kernel text: 3384k
    [ 1.055352] Write protecting the kernel read-only data: 1032k
    [ 1.071412] udevd[68]: starting version 171
    [ 1.187956] SCSI subsystem initialized
    [ 1.210300] libata version 3.00 loaded.
    [ 1.213463] ata_piix 0000:00:1f.1: version 2.13
    [ 1.213484] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.213591] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.213968] scsi0 : ata_piix
    [ 1.214128] scsi1 : ata_piix
    [ 1.214568] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
    [ 1.214632] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
    [ 1.214903] ata2: port disabled. ignoring.
    [ 1.373683] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2
    [ 1.386897] ata1.00: configured for MWDMA2
    [ 1.392272] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WC05 PQ: 0 ANSI: 5
    [ 1.398036] ahci 0000:00:1f.2: version 3.0
    [ 1.398053] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.398174] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.398216] ahci: SSS flag set, parallel bus scan disabled
    [ 1.398301] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
    [ 1.398376] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
    [ 1.398453] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.398893] scsi2 : ahci
    [ 1.399132] scsi3 : ahci
    [ 1.399311] scsi4 : ahci
    [ 1.399475] ata3: SATA max UDMA/133 abar m2048@0xe4809000 port 0xe4809100 irq 44
    [ 1.399551] ata4: DUMMY
    [ 1.399608] ata5: DUMMY
    [ 1.453359] Refined TSC clocksource calibration: 1994.999 MHz.
    [ 1.453425] Switching to clocksource tsc
    [ 1.716689] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.718502] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.718578] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.718690] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
    [ 1.718695] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.719204] ata3.00: ATA-7: TOSHIBA MK1237GSX, DL132C, max UDMA/100
    [ 1.719267] ata3.00: 234441648 sectors, multi 16: LBA48
    [ 1.721104] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.721179] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.721289] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
    [ 1.721293] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.721801] ata3.00: configured for UDMA/100
    [ 1.721984] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5
    [ 1.731236] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.731315] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.731598] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 1.731702] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.731837] sd 2:0:0:0: [sda] Write Protect is off
    [ 1.731902] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.731926] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.845493] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
    [ 1.846050] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.761814] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.051896] udevd[281]: starting version 171
    [ 5.377558] fuse init (API version 7.16)
    [ 5.559732] vboxdrv: Found 2 processor cores.
    [ 5.559807] vboxdrv: fAsync=0 offMin=0x1d6 offMax=0x15ae
    [ 5.559854] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 5.559857] vboxdrv: Successfully loaded version 4.0.8 (interface 0x00180000).
    [ 5.781012] ACPI: acpi_idle registered with cpuidle
    [ 5.786645] Monitor-Mwait will be used to enter C-1 state
    [ 5.786678] Monitor-Mwait will be used to enter C-2 state
    [ 5.786684] Marking TSC unstable due to TSC halts in idle
    [ 5.786717] Switching to clocksource hpet
    [ 6.051738] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
    [ 6.051745] ACPI: Sleep Button [C2BF]
    [ 6.051804] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 6.051865] ACPI: Lid Switch [C153]
    [ 6.051938] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 6.051942] ACPI: Power Button [PWRF]
    [ 6.057265] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.066477] ACPI: AC Adapter [C239] (on-line)
    [ 6.114690] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.114702] ACPI: Battery Slot [C23B] (battery present)
    [ 6.114779] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.114785] ACPI: Battery Slot [C23A] (battery absent)
    [ 6.115381] wmi: Mapper loaded
    [ 6.172603] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
    [ 6.265090] ACPI: Fan [C3C1] (off)
    [ 6.265157] ACPI: Fan [C3C2] (off)
    [ 6.265220] ACPI: Fan [C3C3] (off)
    [ 6.265284] ACPI: Fan [C3C4] (off)
    [ 6.265348] ACPI: Fan [C3C5] (off)
    [ 6.379163] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 6.397190] input: HP WMI hotkeys as /devices/virtual/input/input5
    [ 6.463770] hp_accel: hardware type NC6710x found
    [ 6.513243] iTCO_vendor_support: vendor-support=0
    [ 6.570412] lis3lv02d: 12 bits sensor found
    [ 6.580235] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.580238] ACPI: Thermal Zone [TZ3] (41 C)
    [ 6.803030] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30c0]
    [ 6.831034] Linux agpgart interface v0.103
    [ 6.886604] usbcore: registered new interface driver usbfs
    [ 6.886833] usbcore: registered new interface driver hub
    [ 6.890217] usbcore: registered new device driver usb
    [ 6.901294] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 6.901393] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    [ 6.901464] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.926164] tg3.c:v3.117 (January 25, 2011)
    [ 6.926184] tg3 0000:18:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 6.926195] tg3 0000:18:00.0: setting latency timer to 64
    [ 6.930903] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cb8, PCI irq 16
    [ 6.930908] yenta_cardbus 0000:02:04.0: Socket status: 30000006
    [ 6.930913] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
    [ 6.930922] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff]
    [ 6.930926] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff
    [ 6.938390] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe4200000-0xe45fffff]
    [ 6.938393] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe45fffff: excluding 0xe4200000-0xe423ffff
    [ 6.938409] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref]
    [ 6.938412] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc3ffffff: excluding 0xc0000000-0xc3ffffff
    [ 6.963502] firewire_ohci 0000:02:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 6.990831] ppdev: user-space parallel port driver
    [ 6.995198] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 6.995231] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 6.995250] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 6.995254] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 6.995285] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 7.000019] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    [ 7.006712] ehci_hcd 0000:00:1a.7: debug port 1
    [ 7.011560] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 7.011583] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4800000
    [ 7.023711] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 7.023894] hub 1-0:1.0: USB hub found
    [ 7.023900] hub 1-0:1.0: 4 ports detected
    [ 7.024015] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 7.024029] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 7.024034] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 7.024044] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 7.024158] firewire_ohci: Added fw-ohci device 0000:02:04.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    [ 7.033900] uhci_hcd: USB Universal Host Controller Interface driver
    [ 7.037377] ehci_hcd 0000:00:1d.7: debug port 1
    [ 7.041256] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 7.041277] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4808000
    [ 7.053398] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 7.053920] hub 2-0:1.0: USB hub found
    [ 7.053926] hub 2-0:1.0: 6 ports detected
    [ 7.054087] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    [ 7.054200] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    [ 7.054704] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [ 7.055143] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 7.055302] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.055312] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 7.055317] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 7.055329] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 7.060031] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    [ 7.063576] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020
    [ 7.063770] hub 3-0:1.0: USB hub found
    [ 7.063775] hub 3-0:1.0: 2 ports detected
    [ 7.063872] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 7.063881] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 7.063886] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 7.063894] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 7.073405] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040
    [ 7.073562] hub 4-0:1.0: USB hub found
    [ 7.073566] hub 4-0:1.0: 2 ports detected
    [ 7.073657] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 7.073665] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 7.073671] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 7.073679] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 7.083408] parport_pc 00:02: reported by Plug and Play ACPI
    [ 7.083486] parport0: PC-style at 0x378 (0x778), irq 7
    [ 7.083667] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
    [ 7.083832] hub 5-0:1.0: USB hub found
    [ 7.083837] hub 5-0:1.0: 2 ports detected
    [ 7.083930] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 7.083938] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 7.083942] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 7.083951] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 7.084066] , dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    [ 7.094562] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [ 7.094640] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [ 7.096796] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
    [ 7.096914] Registered led device: hp::hddprotect
    [ 7.096935] hp_accel: driver loaded
    [ 7.097080] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
    [ 7.097249] hub 6-0:1.0: USB hub found
    [ 7.097254] hub 6-0:1.0: 2 ports detected
    [ 7.097349] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 7.097362] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 7.097366] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 7.097374] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 7.112415] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
    [ 7.112609] hub 7-0:1.0: USB hub found
    [ 7.112614] hub 7-0:1.0: 2 ports detected
    [ 7.120662] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    [ 7.121675] tg3 0000:18:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1c:c4:c6:6f:ad
    [ 7.121680] tg3 0000:18:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    [ 7.121684] tg3 0000:18:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [ 7.121687] tg3 0000:18:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    [ 7.208882] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.380385] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
    [ 7.382688] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
    [ 7.383693] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
    [ 7.384516] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
    [ 7.385421] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
    [ 7.385491] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
    [ 7.385557] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
    [ 7.385625] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    [ 7.510546] thermal LNXTHERM:01: registered as thermal_zone1
    [ 7.510549] ACPI: Thermal Zone [TZ4] (23 C)
    [ 7.526773] firewire_core: created device fw0: GUID 00023f99299d0810, S400
    [ 7.532557] [drm] Initialized drm 1.1.0 20060810
    [ 7.582098] thermal LNXTHERM:02: registered as thermal_zone2
    [ 7.582101] ACPI: Thermal Zone [TZ5] (22 C)
    [ 7.600111] thermal LNXTHERM:03: registered as thermal_zone3
    [ 7.600115] ACPI: Thermal Zone [TZ0] (51 C)
    [ 7.603276] thermal LNXTHERM:04: registered as thermal_zone4
    [ 7.603279] ACPI: Thermal Zone [TZ1] (49 C)
    [ 7.670060] usb 3-1: new full speed USB device number 2 using uhci_hcd
    [ 7.733614] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
    [ 7.733621] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
    [ 7.733637] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.733698] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 7.733729] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 7.856415] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
    [ 7.856421] serio: Synaptics pass-through port at isa0060/serio4/input0
    [ 7.897114] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
    [ 7.911295] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 7.948997] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.949004] i915 0000:00:02.0: setting latency timer to 64
    [ 7.962188] i915 0000:00:02.0: irq 46 for MSI/MSI-X
    [ 7.962194] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 7.962196] [drm] Driver supports precise vblank timestamp query.
    [ 8.070059] usb 5-2: new full speed USB device number 2 using uhci_hcd
    [ 8.090218] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 8.090555] [drm] initialized overlay support
    [ 8.104983] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
    [ 8.104986] iwl3945: Copyright(c) 2003-2011 Intel Corporation
    [ 8.105051] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 8.105066] iwl3945 0000:10:00.0: setting latency timer to 64
    [ 8.160258] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
    [ 8.160262] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
    [ 8.160407] iwl3945 0000:10:00.0: irq 47 for MSI/MSI-X
    [ 8.160646] Registered led device: phy0-led
    [ 8.253535] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
    [ 8.476535] fbcon: inteldrmfb (fb0) is primary device
    [ 8.521567] Console: switching to colour frame buffer device 160x50
    [ 8.525923] fb0: inteldrmfb frame buffer device
    [ 8.525925] drm: registered panic notifier
    [ 8.526564] cfg80211: World regulatory domain updated:
    [ 8.526567] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 8.526570] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 8.526573] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 8.526576] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 8.526578] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 8.526581] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 8.527338] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20110316/exoparg2-418)
    [ 8.527351] ACPI Error: Method parse/execution failed [\_SB_.C003.C098._DOD] (Node f4833588), AE_AML_PACKAGE_LIMIT (20110316/psparse-536)
    [ 8.527361] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20110316/video-1148)
    [ 8.528072] acpi device:01: registered as cooling_device7
    [ 8.528588] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
    [ 8.528684] ACPI: Video Device [C098] (multi-head: yes rom: no post: no)
    [ 8.529162] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 9.024454] cfg80211: Calling CRDA for country: NL
    [ 9.027257] Bluetooth: Core ver 2.16
    [ 9.027284] NET: Registered protocol family 31
    [ 9.027286] Bluetooth: HCI device and connection manager initialized
    [ 9.027289] Bluetooth: HCI socket layer initialized
    [ 9.027291] Bluetooth: L2CAP socket layer initialized
    [ 9.028560] Bluetooth: SCO socket layer initialized
    [ 9.032087] cfg80211: Regulatory domain changed to country: NL
    [ 9.032091] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 9.032253] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 9.032256] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 9.032258] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 9.032261] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    [ 9.074179] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 9.074571] usbcore: registered new interface driver btusb
    [ 10.265890] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 10.367394] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.429791] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.622332] Adding 3421840k swap on /dev/sda2. Priority:-1 extents:1 across:3421840k
    [ 15.937897] coretemp coretemp.0: TjMax is assumed as 100 C!
    [ 15.937979] coretemp coretemp.1: TjMax is assumed as 100 C!
    [ 21.256096] iwl3945 0000:10:00.0: load

    The solution which is working for me is the following.
    Create the following file:
    /etc/modprobe.d/iwl3945.conf
    And put the following in it:
    options iwl3945 disable_hw_scan=0
    Of course the file name in modprobe.d can be different but must end with .conf
    via: http://ubuntuforums.org/showthread.php?t=1837729

  • BT Infinity evening and weekend speed drops

    Hi,
    I have a BT Business Hub 5 and Infinity package.
    My connection during the working week in the day is usually around: 
    27.95MB/s down, 4.63Mb/s up and a ping of around 20ms.
    Often in the evenings and on weekends the speed drops to around:
    1.5MB/s down, 4.5Mb/s up and a ping of anywhere between 20ms and 60ms
    I called up BT Business suport and raised a ticket to only have an email the next day stating your issue has been resolved, however it has not been resolved. Obviously they done a test in week day during the day when it is usually fine and not in the evening or on the weekend.
    Basically my old 8Mb package from BT was often faster in the evenings and on weekends, with a typical connection of:
    3.5 to 5Mbps down and a 0.35Mbs up, ping times were between 20ms and 120ms)
    This translates to if I was on my old 8Mb package from BT I could download at around 720Kbs max during the evenings and weekends instead of 160Kbs.
    Anyone actually got BT to solve this? I've read a lot of posts so far where people are just writing letters of complaint and contacting the ombidsman.
    Is there is a resolution to this?
    Thanks
    D

    As a business user you need to post here. https://business.forums.bt.com
    This is a residential forum
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Broadband speeds dropped

    I'm sorry if this has been posted before but it could of taken a while to find a thread on exactly the same subject as mine
    I got BT Broadband, Option 3 last month. When I signed up I was told I could get upto 7.5MB download speeds and for the last month I have been getting speeds of around 5 - 6.9MB which I was very happy about but over the last few days I have seen my speed drop to around 1.7 - 1.9MB and in 1 case as low as 0.7MB.
    My phone still works so I don't think there is a problem with my phone line, I don't believe there is a problem with my router but just so you know I have the HomeHub 2.0
    . I recently did a speed test on the BT website and it claims I can get upto 8MB which is 0.5 more than a month ago so is it possible that the exchange has had some work done on it and it will just take a few days for things to get back to normal? I would appreciate any help that you could give me

    Download speedachieved during the test was - 1313 Kbps
     For your connection, the acceptable range of speeds is 400-2000 Kbps.
     Additional Information:
     Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 2000 Kbps
    ADSL line status
    Connection Information
    Line state
    Connected
    Connection time
    0 days, 14:08:16
    Downstream
    8,128 Kbps
    Upstream
    448 Kbps
    ADSL Settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    G.992.1 Annex A
    Latency type
    Interleaved
    Noise margin (Down/Up)
    12.6 dB / 25.0 dB
    Line attenuation (Down/Up)
    14.6 dB / 6.0 dB
    Output power (Down/Up)
    15.3 dBm / 1.8 dBm
    Loss of Framing (Local/Remote)
    0 / 0
    Loss of Signal (Local/Remote)
    0 / 0
    Loss of Power (Local/Remote)
    0 / 0
    FEC Errors (Down/Up)
    2126 / 0
    CRC Errors (Down/Up)
    2 / 0
    HEC Errors (Down/Up)
    59 / 0
    Error Seconds (Local/Remote)
    2 / 0

  • Upgraded from HH3 to HH5 and Speed Dropped Straigh...

    Hello All,
    I did a very foolish thing earlier in the week. I ordered a Home Hub 5 to replace my Hub 3. I installed it today and immediately the download speed dropped from an average 71megs (+BT WiFi Allowance) to 61megs. I spoke to online support and they basically told me I was only guaranteed about 55meg. Now, I have been getting 71 for more than a year - completely constant. No problems, very little variation. BT Wholesale Speedtest shows my download speed has dropped to 61.00 and my profile is set to 62.28. The slowdown is quite noticable in use. I presume the changeover has caused my line to be re-profiled which, naively, I didn't expect to happen as I was only changing the hub. My hub stats are shown below. Any help would be most appreciated. I have to say though that I should have followed the expression 'If it ain't broke don't fix it' and left things well alone!
    Best wishes and kind regards,
    Roy Bennett
    1. Product name:
    BT Home Hub
    2. Serial number:
    xxxxxxxxxxxxxxxxxxxx
    3. Firmware version:
    Software version 4.7.5.1.83.8.173.1.4 (Type A) Last updated Unknown
    4. Board version:
    BT Hub 5A
    5. VDSL uptime:
    0 days, 23:27:55
    6. Data rate:
    20000 / 64340
    7. Maximum data rate:
    22363 / 74404
    8. Noise margin:
    6.4 / 6.6
    9. Line attenuation:
    0.0 / 18.0
    10. Signal attenuation:
    0.0 / 18.0
    11. Data sent/received:
    162.8 MB / 1.5 GB
    12. Broadband username:
    [email protected]
    13. BT Wi-fi:
    Yes

    I have an update........ after several calls to India I finally found a level 2 Tech that seemed to know what he was doing, very helpful well spoken guy called Sanjeev (pobably never get him again).
    I told him that my HH5 drops out and is very unstable and I should get 75meg but was fluctuation between 6 and 32meg on wi fi.I told him I hve reverted back to my old Huib 3 and Router setrup and both him and an engineer that visited me said that ws a good move. He told me to do the following:
    Go into the hub and change the channel to 11 
    turn all media off that was connecting to the wi fi, from mobiles to laptops and iPads and even the Youview box
    unplug the Router then the HH3 and leave off
    he then resent the line to clear as he said "static/cache on the line and anything holding memory"
    a few minutes later he came back and said to start up the white Router untill the power and DSL lights were on and steady
    turn the HH3 back on and wiait for the 3 blue lights
    fire up my wireless laptop and go to Speedtest.net and check the speed and consistancey
    The result.......... back up to 36meg wifi which is what it used to be in my conservatory and steady as a rock. I get steady 75meg wired and I expect about 50% loss for the distance away through wi fi.
    I am now getting a £33 refund for my trouble and am now trying to arrange for the refund of my HH5 which I have told them is "Not fit for purpose" and asked for my contract to be reverted to before I upgraded.  Watch this spce for update
    Phew!

  • BT Infinity speed dropped from 77mb to 64mb

    Hi there I recently got BT Infinity 2. Which was brilliant for the first two weeks with a constant 77mb IP Profile. But sometime last week (possibly related to the wind and snow?) It just done an insant drop to 64mb and has stuck there ever since. Is there anything I can do to get my speed back up. Or do I have too wait 2-3 weeks for DLM to reset it automatically?
    Before:
    After:
    1. Product name:
    BT Home Hub
    2. Serial number:
    +068543+NQ42955553
    3. Firmware version:
    Software version 4.7.5.1.83.8.173.1.6 (Type A) Last updated Unknown
    4. Board version:
    BT Hub 5A
    5. VDSL uptime:
    0 days, 00:52:01
    6. Data rate:
    18771 / 65605
    7. Maximum data rate:
    18748 / 65502
    8. Noise margin:
    5.9 / 6.2
    9. Line attenuation:
    0.0 / 17.7
    10. Signal attenuation:
    0.0 / 17.4
    Unfortunately I dont have an IP profile screenshot before the speed drop but it was 77mb.
    Thanks

    can you post the estimates from the dslchecker
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for