Areca RAID 1212 PCI Card Drivers ( and possibly others ) not 10.7.4 compatible.

Definatly beware of the Lion 10.7.4 update if your a Areca 1212 ( or other ) RAID card user / owner.
I have a definate issue ... system freeze ... with their current driver.
In contact with them .. awaiting reply.

Yes, It looks like it was the switch and the ethernet ports were the problem. I had them plugged into the HP Procurve switch hoping they would get along, then noticed that the Macpro would not give the ethernet connection an IP without disabling my airport and adding in Ethernet 1 and 2 , then plugged them both into my airport extreme and everyone is dancing!! Thanks for the breadcrumbs to lead my path from my dark thoughs of sledghammers and sparks flying, I was thinking I spent way too much to peice and part this thing together from 4 different sellers on e-bay at about $1050.  The LSI FC PCI Express (125) the two brand new cables in box ($60) 10 500Gb Apple modules plug and play, (575) and the Cabinet loaded with 4 500Gb drives, dual PS, Dual Controllers, Dual Fans shipped for (325) Now that I look at uptime and count in the DROBOs taking a dump on my data when I was treansitioning macs loosing 3500 photos from 10 years, it is a bargan.  it was devistating. Now I feel a lot safer and a new Drobo to backup this set. Two is always better than one... CHEERS BEATLE! Too bad Mountain Lion is not supported, but for professional, who cares if is more "Phone Apps" than a mac mans meat and potatoes...

Similar Messages

  • RAID 5 PCI cards

    Hey all, several years ago I installed a PCI RAID 5 ATA/133 (the drives were 200gig) card in to a G4 500 machine. and now i can't remember what the card was and I don't have access to the machine to double check it. does anyone know a card that will do RAID 5 with large drives?
    Taz

    I had the exact same conundrum about three months ago. After TONS of research, I decided to build my own PC and I am extremely happy I did. The CS5.5 Master Collection runs beautifully and I FINALLY have control over my hardware. You can put whatever Quadro card you want, whatever processor, RAM, and the list goes on...
    And did I mention that I saved loads of money building it myself?
    If you aren't afraid of a little bit if work, you can save a lot of money not having to buy overpriced Apple hardware. Also, with Adobe Cloud, you no longer need to worry about what platform you operate under (Windows 7 is a good operating system).
    Just my two cents. I hope it helps!
    -Keith (a differnet one)

  • Titanium HD PCI-E drivers and DirectX conflict.

    I installed the SB Titanium PCI-E HD in my PC. Then I installed the drivers and software from the attached CD and set the card mode to Entertaiment Mode. I started Foobar2000 and turned on the music. In the Audio Control Panel I went to tabTHX TruStudio PC in order to use the Crystalizer effect. Unfortunately, despite the fact that I turn the Crystalizer I heard absolutely no change in the sound. The same when I turned the surround effect on or the other, no change. I think that THX TruStudio PC does not work. Why? I use Win7 x64 and RCA analog outputs. The second question concerns the option decoder, Dolby Digital Li've and DTS Connect Pack Pack. Will choosing one of these options is the signal decoded with Dolby or DTS? How to configure the card to decode only multi-channel audio and not to process the stereo sound to multi-channel? After removal of the Dolby Digital Li've and DTS Connect Pack Pack can not I use a hardware decoder? I have only the option "Off"

    I bought the Titanium HD and installed the drivers on the disk. THX TruStudio PC would not install. Nor would DTS Connect. They must have shoved a crippled install.exe in my disc :angry: I RMA'd the card and went back to using my old Titanium Fatalty Pro. At least that card works...

  • M-Audio Audiophile 2496 PCI card installed, now computer will not turn off

    I installed Audiophile 2496 card + "live lite 4" software and now my computer will not turn off. It goes through the motions, but than just reboots. I have to hold the start button to kill it. I also have a Firmtek SATA PCI card and a USB 2.0 PCI card. Is there some way to solve this short of pulling the card?

    Hi-
    Do you have the proper driver version installed?
    http://www.macupdate.com/info.php/id/13585

  • Satelllite A100-773 and WIN 7: Card Reader and Fn-Hotkeys not working

    Hi,
    I hope that this question was not asked 100 times before. (I haven't found an answer in this forum)
    Problem:
    Card Reader and FN-Keys are not working, where can i get drivers?
    I installed Win 7 Pro on my Satellite A100-773 Notebook. All works fine and Win 7 has all drivers installed but the FN-Keys and the Card Reader are not working.
    On the Support Homepage is no driver oder anything given for this Notebook with Win 7.
    Can anyone help me with that?
    Tahnks.
    PS: it was not un upgrade version.

    hi at all,
    by now i tried the toshiba value added package for serveral model for win 7 and vista, but before finishing the installation there is an error.
    the card reader is now working with card reader criver for win vista.
    Does no one know how to fix this?!

  • I have 4 charges of the exact same amount on my debit card account and I DID NOT make them. How can I get iTunes to refund my money?

    I tried entering in a new debit card number into my iTunes account yesterday, from my ipod touch. For some reason it was telling me the information I entered does not match my bank account. I tried 3 or 4 times, but to no avail. I figured I would wait until I was at home & do it from my home computer. About 5 minutes after putting my ipod away, I got a call from my bank saying that there are 4 charges of the exact amount that were charged from iTunes just minutes after each other and they wanted to make sure they were not fraudulant. Well they ARE!!! I did NOT authorize any purchases and now I have 4 charges of $34.78 made to my bank account that I didn't make. ITunes only offers online support...ERRRR!!! My bank told me that it is iTunes responsibility to refund the charges. WHAT DO I DO?????????
    Very frustrated...ERICA B

    I just got back from Afghanistan and discovered two fresh charges for $40.00 from itunes on my Visa account. I havent bought anything from I tunes in over a year. And sure as **** not worth $40.00. The Bank rep told me this has been happening a lot and credited my account for the $80.00 worth of unauthorized charges. Also had to have my card cancelled and get a new one. Apple itunes had better get their **** together and aggressively put a stop to this. Or I will. In court, if it happens again. This is happening in their name. I see this all over the place and haven't seen a single statement from Itunes. I'm terminating my relationship with itunes until I see they have satisfactorally addressed this. No one rips me off.

  • I bought a $50.00 dollar Itune card and redeemed my card on Itunes and I went to the apple store to get some music and I was asked for my credit card info and was charged not only on my credit card but on the itunes card as well $ 8.65

    can anyone please tell me how the **** am I suppose to take care an issue on line or my cell phone if no one at the apple store or what ever if all u do is keep getting a machine, my issue is that i bought $50.00 dollar itunes card and then i went to the apple store to redeem my card at witch time i had $50.00 on my account. so i go to itunes to download some music on itunes so i buy the album Blackstreet/ another level For $ 8.65 and was asked for my credit card infor and was charged the same amount of $ 8.65 toi my card.how can I go about getting that money back on my card?

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

  • Can no longer install drivers and touch screen not working anymore

    I have the HP 520-1130ea all in one PC. Its a touchscreen. I have Windows 7 home premiun 64 bit operating system.
    it has been working fine for the last two years and on Friday 11th april, i connected my android tablet (samsung Galaxy tab 7.0) to my pc and it could not install the drivers so my PC could not see the tablet.  Last week this worked ok. I attach my tablet to my pc using a USB cable and transfer files by usb transfer. I dont use any software at all.
    I have tried to reinstall the drivers for the android tablet and i get the error code that the drivers were found but they cant be installed. Access denied.
    I have also tried to restore my pc to the last time everything worked ok which was just a week before the problem started, but the restore has failed on 4 occassions.
    I have now deleted all updates on my PC from last week and i think I have deleted something or failed to allow something to isntall (a box popped up when i restarted the computer after the update delete which I ignored)
    No my touch screen no longer works.
    I plugged in an external hard drive to back up my computer and I also could not install the drivers for that too. this just happened today.
    My printer is connected to my PC and that still works ok.
    I have been battling with this for 4 days now and ploughed the internet for solutions and no hope in sight!
    I have also tried:
    1. installing optional updates. no luck there. also some of the updates failed
    2. giving myself full control on the system 32 folder in windows.
    I am the administrator on the PC.
    HELP PLS!!!

    Hi compnewbie,
    Welcome to the HP Forums!
    Thank you very much for your thorough post and detailed steps! I see that you are not being able to install drivers, and I would be happy to assist you!
    The first suggestion I will make is to boot your computer in Safe Mode. To do this, please follow this document on Windows 7 Safe Mode. No extra software will be loaded, which will make this driver issue easier to troubleshoot. In Safe Mode, try to connect your external drive.
    If you still cannot connect your external drive (or any other USB device), I recommend following this resource on Testing for Hardware Failures (Windows 7). This should help diagnose any potential hardware problems with the computer.
    If you are not able to detect any hardware problems on your computer, please follow this document on Restore files from a backup.
    Please re-post with the results of your troubleshooting, and I will diligently follow up with you!
    Best regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Installed Windows & 32 Bit But Drivers and USB ports NOT WORKING.

    I bugh an HP Pavillion TS 14 Notebook that came preinstall with Windows 8.1 64 bit which I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and the 2 uSB ports where I plug my mouse and other SB hardware in no longer work. 
    I did a back up of the SW Set up file that has all of the HP dvers for my laptop but both the network and video divers won't install. And When I try to install the drives I get the eror message saying they are not compatible with this version of Windows.
    I have loked on the HP website under my laptop model which s as above but HP don't do drivers for Windows 7 32 for my laptop. And I have looked on both the Realteck website for both the Realteck ethnet and Realteck wireless network drivers but none of them work or install on my operating system. The video drivers Intel don't work either. So I am really stuck a I cannot go back to Windows 8.1 as though that 32 bit Windows 7 would work on my laptop but most of my drivers are not compatible with the operating sytem And I don't want to install 64 bit Windows as I like 32 bit.
    The drivers that are not working on Windows 7 32 bit are:
    Realteck RTL8188EE 802-11b/gn witeless lan
    Realteck ethnet die and
    Intel High definition graphcs driver 
    Which don't work at all on Windows 7 32 bit as they are 64 bit only drivers.
    So can you please post me a link bth the network and Intel graphics drvers that work with my laptop. As I have tried lots of different Realteck and raphics drivers for Window 7 but NONE of them work on my system. And None of my USB ports are working either. So how do I solve this problem?
    This question was solved.
    View Solution.

    Hi:
    Should be no problem to get W7 32 bit to work on that model.
    Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
    Your model uses the Intel HD graphics driver only.
    The first driver you have to install is the Intel chipset installation utility and then reboot.
    http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
    Audio:  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
    If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

  • Drivers and Software will not work on new hard drive

    Hello:
    Pavilion DV7-4270us
    Windows 7 64 bit
    I installed new 500 GB hard drive into the above referenced notebook, as previously installed 640 GB hard drive from factory began to fail.
    I have downloaded drivers and software for HP Media Smart, HP Simple Pass Fingerprint Reader, and HP Power Manager from HP Download page, and none of these work.
    HP Support Assistant was downloaded and it works, however it says no updates needed.
    Is this because I installed a hard drive not purchased from HP?
    Thank you for any help you could provide.

    No the laptop does not care where you bought the hard drive. Do you have any devices that are not working right in the Device Manager?

  • HT4191 I was sincronizing my iPad by using the INFO Section by: Other Sync notes with Outlook Advanced Notes. The result was a huge problem, because it erased the notes in my iPad and added other notes of my commpuerte into my iPad. What can I do to?

    I was sincronizing my iPad by using the INFO Section in iTunes when my iPad was connected by: Info>> Other >> Sync notes with Outlook >> Advanced >> Notes.
    What I wanted to do, is pass the notes in my iPad to my computer (Outlook) in order to have a backup of that information. Nevertheless, what the sincronization did was eliminate all the notes that I had in my iPad and incorporate new notes from my computer.
    Is there any way to restore my old notes? Is there a "trash" in iTunes were I can find that set of notes?
    I do not think I have a backup of my iPad, therefore I cannot use that option. Does any one have any solution for my problem??? I would really appreciate some help.

    Not as yet, and the proper answer is for Microsfot to update O2011 for iCloud, they have a statement noting that iCloud is not supported (Mail is) but no timetable for a fix.

  • PCI cards, iMac and Final Cut Express HD

    I recently bought Final Cut Express HD for my iMac and I was pretty sure that i met all the requirements. It will not install and keeps crashing on my computer. I need some help. I look under my mac hardware and I have listed under graphics ATY,RadeonX1600 and quartz extreme is supported. There is also under Bus: PCIe. Final Cut Express HD requires an AGP or PCI Express graphics card compatible with Quartz Extreme. I do not know this technical stuff. I need help please. 1. Does my computer match this already? 2. if not what do i need to get to make this work?
    My iMac is an early 2006 one of the first intel core computers with a 1.83ghz if that helps at all.
    Thanks,
    Bridget

    How much RAM you got in that puppy? I'm not sure if the first Intel Macs came w/ 512 RAM but if they did you might need to upgrade in order for it to run properly. I would make sure you had at least a gig and try the re-installation techniques as suggested. Tiger by itself needs at least 512 and Final Cut requires the same so RAM might very well be the issue. I personally re-install from the OS up when I get a new version of software and this is especially true when upgrading from a PPC to Universal app. and I do this all after zeroing out and refomatting the drive if it hasn't been done yet (when I first received the computer).

  • Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, Photoshop CC won't read the card drivers and says I need to reinstall them and disabled 3D funtions as a result. Anyone else with this issue?

       Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, I upgraded to Adobe CC and Photoshop CC disabled some filters and 3D functionality. The preference panel for Performance/Graphics Card in Photoshop CC is greyed out and inaccessible and shows this message -
    "Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
       I still have Photoshop CS6 installed and it still works perfectly. Anyone else with this issue? Is there a driver update for this compatable with my setup?
    OS 10.7.5
    Mac Pro 1,1
    20gb ram
    ATI Radeon HD 5770 Graphics Card
    30" Apple Cinema HD display

    after going round with this Adobe was able to find the fix....opened the "show content" folder for the application Photoshop CC (control click on the application folder) and navigate to the sniffer file and rename it by putting a tilda ~ in front of the name..." ~sniffer ", close and open PhotoshopCC...and voila, problem solved... Thankyou Adobe support

  • E5 memory card images and videos are not visible i...

    am using nokia e5,it was working all well but few days before i tranferred files from laptop to my cell(images) using Mass Storage option by data cable.soon after that images and videos saved in memory card is not visible on phone.test mesgs and music files are visible but phone isnt showing my images and video files which ive recievd through bluetooth and saved in memory card.why is this so???plzzz help me am in mess cant help it

    Hi saaraaz,
    Welcome to the forum! I tried to transfer pictures via bluetooth and they were saved to gallery like they should. Please try the following actions and between them test if it works.
    Firstly please make a back up with Nokia Suite. Then type in *#7780# = soft reset, no data lost.
    If it's still the same, type in *#7370# = hard reset, the phone memory will be wiped. Restore back up. You can also try to make the back up without settings and then format and restore.
    Reinstall the software. The process is the same when updating, but at the end select "reinstall". 
    Hope you get the device working again, please let me know if this is not the case.
    Jampe
    If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

  • HP dm1z drivers and software downloads not working

    Hello folks
    I am trying to download the software and drivers for my dm1z from http://gkz1.co/nYEsZ1 (short URL for the official HP page), but none of the links work. They all point to ftp://ftp.hp.com/pub/softpaq/sp52501-53000/ but it seems the folder doesn't exist in the ftp server?
    Cheers 

    Actually, never mind. I am replacing the original HDD with a SSD, and found the drivers folder in the HDD, so installing from there.
    Thanks...

Maybe you are looking for