ARES movie session killing my network

If one of my kids starts up an internet ARES P2P movie playing session, my home network (Linksys routers and hubs) gets buried in data. The activity lights are on almost solid. No other network users can get service from the router and all existing network connections time out. No other application(s) behaves like this. Any ideas on how to throttle this ARES session down? Why does the Linksys technology allow one session to eat up all the available network resources?
Thanks in advance for any help.

Hi… Check on which port does this ARES works. Enable QoS on your router and set low priority for this port. So whenever there is any request form any other port on your network, the router will allow that port traffic first and then the traffic for ARES. This may resolve your Issue. Upgrade the firmware if required.

Similar Messages

Are client sessions KILLed or DISCONNECTed, when you shutdown a database?

When we stopped the oracle service, one of the clients got the error: "ORA-00028: your session has been killed" and then
instead of: "ORA-03114: not connected to ORACLE"
it got: "ORA-01012: not logged on"
That means that the connection stood alive.
Similar things happen when you execute "ALTER SYSTEM KILL SESSION" on an inactive connection
(killing connections that are, for example, performing SELECTs at the moment, disconnects them)
The fact that a connection may stay alive after the error "your session has been killed" means that clients that get this error should close the connection themselves.

Hi,
Based on my experience, the notice about restarting Outlook will appear if there is something changed about the mailbox. Thus, I’d like to confirm if users can reconnect to Exchange server after restarting Outlook.
Addintioanlly, this issue also occurs because the IP address of the Client Access Array is being returned to the client instead of the server that is hosting the Public Folders. Observed when Public Folders are mounted on a multirole Exchange 2010
server that is a member of a Client Access Array.
For more information, you can refer to the partition named Same AD site with just one CAS Array in the following article:
http://blogs.technet.com/b/aljackie/archive/2013/11/14/outlook-rpc-end-point-and-pf-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Are movies in the iTunes store un-cut or edited such as The Tudors

Are movies and Tv Shows in the iTunes store un-cut or edited such as The Tudors. I want to but the series but I don't want the edited version.

Any idea when the movies and series become available elsewhere
This has been said here many, many times already, but again, they'll be available if and when the owners of the content - the networks, production companies and movie studios - allow Apple to sell them in Finland and other countries. When, or indeed if, that will happen, no one here knows or can say, though as Zevoneer said, Apple at the time movies were announced said that they hoped to be able to offer movies internationally sometime in 2007. Nothing has been said at all that would lead me to believe that TV shows are likely to be offered outside the US in the forseeable future, though we can hope.
or when I could buy from the US site with a non US credit card?
Unless the content owners all get together and agree to allow cross-border sales, something they don't allow now for any download store, that will never happen.
Sorry, but it's all controlled by the content owners and for the most part completely out of Apple's hands.

Is Killer Network actually Killing My Network?

Hello All,
I have been running into issues this past week after a recent computer build. One of my computers either is having Video Card Issues, or Network Issues.
I have a "Lan Center" that I have built over the years in my basement. Ever since the early Beta Counterstrike days I have always ran more than 1 computer in my household. Most of my friends are broke hippies, but I work in IT and enjoy playing once in a while.
The Game : GTA V for PC
The Problem : When going high speeds in vehicles, or when in big online lobby's. The framerate either drops (I don't know how to monitor FPS on this game as of yet) or my network is dying. On the other two PC's when in a private lobby, I can watch this PC lag in game. It will start off fine, but jump in a Bugatti, and it all goes to hell.
The Hardware :
Computer 1 -
CPU -i7-5820K (No OC)
Video - EVGA GTX 970 (No OC)
Mobo - ASRock X99X
HDD - Samsung 850 Pro 512gb
Ram - Crucial 16GB DDR4
PSU - Corsair AX760
CPU Cooler - Corsair H75
Sound - Creative SB ZxR
Case - NZXT H440
OS - Win 7 64bit Pro
Computer 2 -
MSI GT60 20D-026US Laptop
CPU - i7 4700MQ (No OC)
Video - GTX 780m (No OC)
HDD - Samsung 840 EVO 500gb
Ram - 16GB DDR3
OS - Win 8.1 64bit
Computer 3 -
CPU - i7-4790K (No OC)
Video - Radeon HD7870 (No OC)
Mobo - MSI Z97-GD65
HDD - WD Black 1TB
Ram - Kingston 8GB DDR3
PSU - EVGA 750G2
CPU Cooler - Stock
Case - NZXT H440
OS - Win 7 64bit Pro
Network Equipment -
Connection - Comcast 50/10
Modem - Motorola SB6121
Router - Netgear N750
Troubleshooting : I have already updated all of the drivers for the current hardware. I have already ran ALL windows updates. I have already ran Speccy on the culprit pc (Computer 3). All idle temps are fine, I left it running while running the game and all temps appear to be fine then as well. What I don't understand is the network graph, while in game it shows HUGE spikes and inconsistency. Thinking it could be a network cable, I replaced it with a new one. I just don't understand why this computer would spike and the other two don't. Another possibility is, when building this computer, it was basically a swap from my main computer. I never uninstalled the drivers for my GTX 970, so I guess there is a possibility that that is causing the video issue. All have Killer NIC cards. So stands my question. Is Killer Network, killing my network? Any help would be greatly appreciated. Also, any tips on buffing up my network would be great as well. Thanks in advance!

I am with JLio01 on this. Try the Killer Network driver without the application and see if that fixes the issue.
There is not really any reason that it should lag like that.

Hyper V file transfer kills the network

Dear All,
We have 4 Hyper V VM installations on 2 HP DL 380 G8 servers and have they are connected to HP NSA 2040 SAN Storage through 6 Gbps Fibre channel. The physical machines are clustered.
Out of the 4, 2 are Clustered Hyper V's running Microsoft Dynamics AX 2012 R3 and we have 2 Clustered Hyper V for Database server running MS SQL 2012 R2.
The issue here is that the APP servers are slow in communicating with the DB server. The Hyper V's have a dedicated 4 * 1Gbps interface cards teamed and the packets are getting timed out. But from any other machine in the subnet the communications are proper.
When ever i try to copy a file from the DB server to the APP server using SMB share it kills my network, the copy will happen but after the copy is completed the network comes backup.
Its strange scenario. APP server 2 APP server smb copy is fine, and from DB to DB smb copy is fine but cannot copy between them.
Can anyone please help?
Thanks,
Sriram A Das

Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Hyper-V forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Session kill

Hi
The database users will normally have the serial# and session id and it is possible to kill the database user session using the query
alter system kill session 'serial#,sid'
similarly do the oracle ebs front also application users also have a session or not.do they have a unique database session id and the serial#.is it possible to kill the application user session using the query
alter system kill session 'serial#,sid'
Bcoz i learnt that the application users are entirely different from the database users and they donot have any kind of relation with the database users.Is it true? can we use the same method to kill the application user session which we use to kill the database sesssion?
please reply me

Hi aram;
The database users will normally have the serial# and session id and it is possible to kill the database user session using the query
alter system kill session 'serial#,sid'
similarly do the oracle ebs front also application users also have a session or not.do they have a unique database session id and the serial#.is it possible to kill the application user session using the query
alter system kill session 'serial#,sid'
Bcoz i learnt that the application users are entirely different from the database users and they donot have any kind of relation with the database users.Is it true? can we use the same method to kill the application user session which we use to kill the database sesssion?For session kill firstly i use below query
select s.sid,s.serial#,s.username,s.osuser,p.spid,p.terminal,s.program from v$session s ,v$process p where paddr=addr and spid='PID' (PID here session number)
Than i prefer to use toad(you can use some other) as session browser. Applicaton user and db user session can be kill from here or OS base(kill -9) but firstly you have to understand which process using what in ur enverioment. I suggest check below :
EBS-session started time
Re: session started time
How to find the Culprit
How to find the Culprit?
Hope it helps
Regard
Helios

Chat SSDP Discovery flooding network killing all networking

I am having a huge issue with the latest version of iChat. When I start it up it sends out 10,000 to 20,000 SSDP requests to 239.255.255.250. If I shut down iChat it continues for about a minute then stops and everything is back to normal. Tried changing the ports.
We are using NAT on a Windows 2003 server.
This kills the network and no other network traffic happens.
When I run iChat at home it all works fine, without a problem. It is only when I am in the office.
My office setup is DHCP from a Windows 2003 R2 x64 server and all network traffic is routed through this server via NAT.
It has been working fine in the office for about a year and all three macs worked fine. Now all three have the same issue.
A network sniff with WireShark shows that my mac sends a MDNS query to 224.0.0.251 then to 10.x.x.x which is the server. but the one to the server is designated a malformated packet.
My mac then sends a SSDP request to 10.x.x.x
The server replies with an ICMP packet saying the port it not reachable
My mac then sends out another request to the server
Then it sends out a SSDP request to 239.255.255.250 and continues doing so killing the network.
This is part of the packet trace
Host:239.255.255.250:1900
ST:urn:schemas-upnp-org:service:WANIPConnection:1
Man:"ssdp:discover"

Hi Ralph
Thanks but no joy.
Some more background information:
When I run iChat at home it all works fine, without a problem. It is only when I am in the office.
My office setup is DHCP from a Windows 2003 R2 x64 server and all network traffic is routed through this server via NAT.
It has been working fine in the office for about a year and all three macs worked fine. Now all three have the same issue.
A network sniff with WireShark shows that my mac sends a MDNS query to 224.0.0.251 then to 10.x.x.x which is the server. but the one to the server is designated a malformated packet.
My mac then sends a SSDP request to 10.x.x.x
The server replies with an ICMP packet saying the port it not reachable
My mac then sends out another request to the server
Then it sends out a SSDP request to 239.255.255.250 and continues doing so killing the network.
This is part of the packet trace
Host:239.255.255.250:1900
ST:urn:schemas-upnp-org:service:WANIPConnection:1
Man:"ssdp:discover"

IChat SSDP Discovery flooding network killing all networking.

I am having a huge issue with the latest version of iChat. When I start it up it sends out 10,000 to 20,000 SSDP requests to 239.255.255.250. If I shut down iChat it continues for about a minute then stops and everything is back to normal. Tried changing the ports.
We are using NAT on a Windows 2003 server.
This kills the network and no other network traffic happens.
This has only just started in the last week.

Hi Ralph
Thanks but no joy.
Some more background information:
When I run iChat at home it all works fine, without a problem. It is only when I am in the office.
My office setup is DHCP from a Windows 2003 R2 x64 server and all network traffic is routed through this server via NAT.
It has been working fine in the office for about a year and all three macs worked fine. Now all three have the same issue.
A network sniff with WireShark shows that my mac sends a MDNS query to 224.0.0.251 then to 10.x.x.x which is the server. but the one to the server is designated a malformated packet.
My mac then sends a SSDP request to 10.x.x.x
The server replies with an ICMP packet saying the port it not reachable
My mac then sends out another request to the server
Then it sends out a SSDP request to 239.255.255.250 and continues doing so killing the network.
This is part of the packet trace
Host:239.255.255.250:1900
ST:urn:schemas-upnp-org:service:WANIPConnection:1
Man:"ssdp:discover"

Itunes 6.0.1.3 is killing my network!

The last time I updated all my podcasts was 12-8-5. I had not run Itunes since then. I fired it up this past weekend and something really strange happened.
It was unable to update any podcasts. Also, my laptop had disconnected from my wireless network. I closed Itunes but my system still was unable to see any wireless network. I rebooted and was able to connect again. I then left the wireless properties open and started Itunes. My wireless connection began to drop in speed over the course of 1 minute from 54 -> 36 -> 24 -> 11 -> 1 -> 0 Mbps when it again disconnected and would not see wireless. I rebooted and started all over again. This time I closed Itunes before it killed the connection and within 1 minute my speed is back up to 54 Mbps.
This is also happening on my hardwired Desktop! As soon as I fire up Itunes, the lights on my switch and router and every AP start flashing like crazy! I am talking about three switches and a wireless bridge. The activity lights on all devices go crazy until I kill Itunes on my desktop. As soon as I do, the activity stops, but I am forced to reboot all my network devices to get the network up again.
No, I am not the only person in the world seeing this behavior. I just listened to Leo Laporte's KFI Tech Guy podcast from the first week of December and a caller was describing the exact same issue:
http://leoville.tv/radio/ShowNotes/Show201#toc3
I have also found another reference to the same thing here:
http://forums.macnn.com/archive/index.php/t-246946.html
And another here:
http://groups.google.com/group/microsoft.public.windowsxp.networkweb/browsethread/thread/12be291b47a65868/04144bc0accb23f8#04144bc0accb23f8
Basically, running Itunes kills my network!
I have turned off all automatic network functions in Itunes, like automatic podcast updates and search for shared music. Turning off search for shared music seems to have solved the need to reboot every network device in my house, but running Itunes still causes the death of my wireless connection on my notebook.
I can only postulate that this MUST be the result of a recent XP update since Itunes was working just fine a few weeks ago. To test this theory, I will be doing a parallel OS install of XP SP2 on my laptop with no additional updates and Itunes the only installed application. I might try doing this in Virtual PC first, but I am not sure I could trust its results.

OK,
I just installed Itunes 6.0.1.3 on a fresh install of XP SP2 in Virtual PC.
Simply starting Itunes, No subscriptionsn no podcasts to update, and the same results.
Within 1 minute, the network connection on the VPC was dead and reported limited or no connectivity. Before it died, the wireless on my laptop began to decrease in speed. As soon as the network connection in VPC died, it began rising again. As with my desktop, my network devices activity lights lit up almost solid! The ethernet bridge that connects my ReplayTV to the network went solid on activity and my Replay was knocked off the network. It would appear the 6.0.1.3 is spewing a bunch of garbage on the network to the point that it is killing all my devices.
Whenever Itunes is open on any system on the network (In its default config), ALL devices lose network connectivity.
Now I will try an older version on the virtual PC and see what happens..
Stephen TN

How can i see which devices are connected to my wireless network?

how can i see which devices are connected to my wireless network?

Login to your router and view the DHCP clients.

Why are my devices finding two networks with the same name in my house?

I have Verizon FIOS (Actiontech router) connected with an ethernet cable to my Airport Express. Everything works beautifully through all three levels of my house...except... there are seemingly two networks in the house...a 192.X network (I think that is the Actiontech router), and a 10.X network (I think that must be the airport express)...
Here is the problem...
My devices (MACS, i-PADS, wireless printers) sometimes connect to the 192.X network (usually on channel 11) and sometimes they connect to the 10.X network (usually on channel 1). If the computers & i-PADS are not on the same network as the printers, then I can't print because the computer can't find the printer.
With the printers, every time the power goes out it's a crapshoot to see which network they reconnect to...and I have not found a way to manually choose a network since both networks have the same name and password (and I think they have to be set up that way in order for the Airport Express to work properly with the Verizon router.
Any help would be much appreciated.
Thank you.

OK, thanks. Did you see the message I posted right after your previous reply? I'm copying it here. Would choosing option two below, "join a wireless network" vs. "create a wireless network" be similar (or the same) as running in bridge mode? Thanks.
Tried a different MAC in my house using Lion instead of Mavericks and was able to open a version of Airport Utility. I couldn't find the tabs as in your picture; however, I did find a box that says, "This airport express is set up to create a wireless network." Three options are then listed as follows:
1- create a wireless network (the one that is checked)
2- join a wireless network
3- disable wireless and connect to a computer or network using Ethernet
If I choose option two above, would that solve the problem?
Thanks.

How to I get my Canon MX700 to scan to my new iMAC top? Currently the Canon will print from the iMAC. They are on a wireless home network. The Canon use to scan to the PC using software called MP or Navigator.

How do I get my Canon MX700 to scan to my new iMAC top? Currently the Canon will print from the iMAC. They are on a wireless home network. The Canon use to scan to the PC using software called MP Navigator.

Did you try scanning using Image Capture?
Otherwise, check the Canon website for updated software.

I just upgraded to mountain lion. I am unable to use airplay mirroring through my apple tv. They are both on the same network. It says a airplay icon should appear in the menu bar but it isn't there. What am I missing here?

I just upgraded to mountain lion. I am unable to use airplay mirroring through my apple tv. They are both on the same network. It says a airplay icon should appear in the menu bar but it isn't there. What am I missing here?

http://www.apple.com/osx/specs/

Are .mov files usable in PE 13? If not, can PE 13 convert them to a usable format? Will the result be usable in a slide show created with Photoshop Elements 13?

Are .mov files usable in PE 13? If not, can PE 13 convert them to a usable format? Will the result be usable in a slide show created with Photoshop Elements 13?

jayarl
Please do not duplicate thread. It gets confusing for you as well as for those trying to respond to your question.
I have replied to your question in your other thread.
https://forums.adobe.com/thread/1662961
Please continue the discussions there.
A moderator will probably delete or close one of the duplicates as soon as seen.
Just a note...Photoshop Elements 13 and Premiere Elements 13 are standalone products. Each comes with the
Elements Organizer 13. When both are on the same computer, they share the same Elements Organizer 13.
ATR

HT5706 I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any help?

I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?

Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer.

ARES movie session killing my network

Similar Messages

Maybe you are looking for