Argggg ,DKU-2 driver installed but cannot locate d...

can anyone tell me what im doing wrong ,i have started from scratch so many times now.
I am on 98SE ,phone is 6230 ,the cable is a DKU-2 for USB connection.
The cable driver install o.k as far as i can see but when i plug device into port it goes to install wizard and cannot find the driver.
There seems to be no connection between the driver and phone.
My wife is going to murder me ,ive been on this computer for 2 days !!!.

i am getting no wireless communication devices being created after downloading the cable driver.
After downloaded and plug cable and phone in it goes through installwizard telling me no drivers could be found.
Has anyone had success sorting this issue ?

Similar Messages

  • ITunes successfully installed, but cannot locate iTunes anywhere.

    Please help. Tried uninstalling and re-installing all Apple-related applications several times. Also deleted all folders prior to reinstalling. After running iTunesSetup, it says iTunes is successfully installed, but there is no tick box to open iTunes after installation. Also, there are no error messages and I can't locate iTunes anywhere. Looked at other discussions, but they don't seem to apply. Hope someone can help. Thanks!

    Hello,
    Have you tried running MSconfig on your computer, this is what I have done in the past to rectify the issue:
    http://docs.info.apple.com/article.html?artnum=302538
    Also you may want to check this out:
    http://docs.info.apple.com/article.html?artnum=302775
    There are lots of links off the bottom of the last article which will certainly help.
    Hope this helps you,
    Ms D.

  • Installed, but cannot get Firefox to run. When I try, it crashes. Report contents give adapterdevice id - 0x0a3c and adaptervendorid - 0x10de

    Installed, but cannot get Firefox to run. When I try, it crashes. Report contents give adapterdevice id - 0x0a3c and adaptervendorid - 0x10de
    Have tried to uninstall and reinstall.

    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!

  • Hello I have Adobe Flash Player installed but cannot enable it.

    Hello I have Adobe Flash Player installed but cannot enable it.

    NPAPI is installed on my Mac but I cannot enable it - is there a customer service number for Adobe I can call

  • I have win xp version 202 service pack 3 had printer laserjet1010 installed but cannot install it an

    i have win xp version 202 service pack 3 had printer laserjet1010 installed but cannot install it again as error message is
    the installation file for this device is missing anecessary entry.this may be because the INF file was written for win95 or later

    helhaj,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit

    need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit

    When you contacted the modem manufaturer what did they have to say?

  • I HAVE ADOBE READER INSTALLED BUT CANNOT OPEN PDF FILES ON THE INTERNET

    i HAVE ADOBE READER INSTALLED BUT CANNOT OPEN PDF FILES ON THE INTERNET

    This could be the problem/solution: http://support.microsoft.com/kb/2716529

  • I have windows 8.1 operating system and I purchased and downloaded the Acrobat Professional XI. I am able to see the download but cannot locate how to pin it to my taskbar.

    I have windows 8.1 operating system and I purchased and downloaded the Acrobat Professional XI. I am able to see the download but cannot locate how to pin it to my taskbar.

    Hello,
    Please refer to following article:
    http://windows.microsoft.com/en-us/windows7/pin-a-program-to-the-taskbar
    Regards,
    Anoop

  • I have a Canon MP990 and i keep getting an eror code.  I have searched for a driver update but cannot seem to find one- Any ideas please?

    I have a Canon MP990 and I keep getting a communication error code 306A.  I have tried the usual turning everything off and starting again all to no avail.  I have searched for a driver update but cannot seem to find one- Any ideas please?

    Hi Peter!
    I'm sorry to read that you are having issues with your Sync account.
    Your best bet is to follow the steps described in this blogposts and open a bug:
    https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/
    After that, if you don't want to user Sync in your computer, you can stop it with this simple steps:
    * At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options.
    * Once the options window opens, click on the Sync tab.
    * At the bottom of the Sync tab click on '''Deactivate this Device''' link

  • I cannot transfer movies on my iphone 4s eventhought its mp4 format. it say 1 item could not be sync see itunes for more information. Tried to look for the reset warning on itunes 11.0 but cannot locate it. Help please

    i cannot transfer movies on my iphone 4s eventhought its mp4 format. it say 1 item could not be sync see itunes for more information. Tried to look for the reset warning on itunes 11.0 but cannot locate it. Help please

    Hello eLZhi,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article provides the most relevant information to your question:
    iOS: 'Not enough free space' alert when trying to sync
    http://support.apple.com/kb/TS1503
    Thanks,
    Matt M.

  • Just downloaded lion in says its installed but cannot find it but its paid for by wizz

    just downloaded lion in says its installed but cannot find it but its paid for by wizz

    Look in the Dock or the Applications folder for an installer for Lion.  Then run it.

  • I have downloaded words with friends on my imac but cannot locate it. Can anyone help?

    I have downloaded the Words with Friends app on my imac but cannot locate it. Can anyone help please?

    Check your Downloads folder for file possibly ending .dmg. If it's not there, and you use Safari check in its Preferences>General panel to see where downloads are directed to. If you use another browser check its preferences to see where downloads should go.

  • Adobe Air installed but cannot be found/opened on Macbook

    Hi,
    I have installed Adobe Air on to my Macbook Air (10.8.5) several times. When I first bought my laptop, Adobe air was working fine. Each time it I install the application, it says that adobe air has been installed but I cannot locate the application on my laptop to open it.  I currently have adobe reader 9.5.5. I have tried to uninstall adobe air and re-install it but that has not helped.
    Please help!
    Thank you!!

    Hi, Since Pat may not be on the Forum until later, perhaps I can clear up Flash Player. Some terms are confusing, I'll admit.
    The System32 location that Pat posted is where the Flash Player Files are Installed and listed. In IE, there is an ActiveX Control, the Shockwave Flash Object that is Installed and this works with the Flash files. All Flash content and videos must have the Flash files and the  ActiveX Control for those to work.
    Since you use Vista, Flash Player should be listed in Control Panel, Add/Remove or Programs & Features. I use XP so it is in my Add/Remove.
    When Flash Player is correctly Installed per above, then any Flash Content and Videos can be viewed. I don't understand the Hard Drive mention. Unless they have downloaded Videos, perhaps that is what you mean. If not, then I don't know.
    Pat would know:-)
    Hope this helps,
    eidnolb

  • SetupApi.dev.log error message on driver install, but driver runs fine anyway... why?

    Hello,
    I am trying to run down the cause of the following warning/error message I see in my SetupApi.Dev.log file after I install a commercially signed driver.
    !    sig:           Verifying file against specific (valid) catalog failed! (0x800b0109)
    !    sig:           Error 0x800b0109: A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider.
    I see this error against all the files in the driver package, but the driver operation has so far been just fine.
    I have checked the certificate chain for the driver (there are 3 certificates in the chain: a root, an intermediate, and the code signing certificate I purchased, all from Verisign/Symantec), and compared the root and intermediate certificates against ones
    that are already installed on the machine where I installed the driver.
    Using the MMC, I can see:
     - the root certificate is located at:         Console Root->Certificates-Current User->Trusted Root Certification Authorities->Certificate
     - the intermediate certificate is located at: Console Root->Certificates-Current User->Intermediate Certification Authorities->Certificate
     - the code signing certificate is located at: Console Root->Certificates-Current User->Trusted Publishers->Certificates
    This all seems to make sense to me for as much as I've been able to research from the MSDN, so would there be some reason why this message shows up, yet the driver seems to install and operate correctly anyway?
    I am using VS 2012 Pro on top of Windows 7 (x64) Pro SP1 to perform the driver build and code signing.
    Thanks much in advance for reading this, and for any insight/advice you might have about this.
    Geoff

    Hi Pavel, Jason, and Bryan,
    I apologize for not getting back to this sooner, I got side tracked with a different task for a few days...
    I really appreciate your looking at my problem.
    I did some more digging and contacted VeriSign/Symantec for some assistance and learned
    I had a few things set up improperly with respect to my code signing certificate.
    VeriSign pointed me to a few links to straighten out my code signing certificate's chain of trust on
    my code-signing machine, and then they also pointed me to a couple links similar to the one
    Bryan provided here for the cross-signing certificate I needed.
    The links are provided below for reference (in case somebody else can make some use of them too)
    1. Disable root cert, so my certificate's signing chain of trust shows up:
     https://knowledge.verisign.com/support/code-signing-support/index?page=content&id=SO16958&actp=search&viewlocale=en_US
    2. Get the correct intermediate certs insalled:
     https://knowledge.verisign.com/support/code-signing-support/index?page=content&id=AR1739&actp=search&viewlocale=en_US
    3. Get the correct X-signing cert from MSFT (same dert as the one Bryan provided in his link):
     https://knowledge.verisign.com/support/code-signing-support/index?page=content&id=SO16763&actp=search&viewlocale=en_US
     https://knowledge.verisign.com/support/code-signing-support/index?page=content&id=SO5820&actp=search&viewlocale=en_US
    I'm building/signing this for Release, on a Windows 7 x64 platform. I am doing this using the
    Windows 8 WDK and VS 2012 Professional. It's a nice combination, as it automates the driver
    signing process.
    My driver is a package of files, and is signed with a CAT file.
    I wanted to be sure the files were signed correctly, so I ran "signtool" over each file in the package
    to verify the signing is correct. I've included the output from one of the files here. Save the filename,
    the output is identical for each file in the package.
    The signing certificate chain shown below matches my code-signing certificate chain when I examine it
    using the MMC-certificate snap-in.
    The cross certificate chain shown below is identical to the output from the VS 2012 IDE. Note the MFST X-signing
    certificate is in this chain from step 3 above, it's the second one from the top in the chain.
    ============================================
    output from signtool verification of package
    ============================================
    C:\Users\Me\Desktop\Driver\Package>signtool verify /v /kp /c mydriver.cat fileA.bin
    Verifying: fileA.bin
    File is signed in catalog: mydriver.cat
    Hash of file (sha1): nnnnnnnnnnnnnnnnnnnnnnnnnnnn
    Signing Certificate Chain:
        Issued to: Class 3 Public Primary Certification Authority
        Issued by: Class 3 Public Primary Certification Authority
        Expires:   Wed Aug 02 17:59:59 2028
        SHA1 hash: A1DB6393916F17E4185509400415C70240B0AE6B
            Issued to: VeriSign Class 3 Public Primary Certification Authority - G5
            Issued by: Class 3 Public Primary Certification Authority
            Expires:   Sun Nov 07 17:59:59 2021
            SHA1 hash: 32F30882622B87CF8856C63DB873DF0853B4DD27
                Issued to: VeriSign Class 3 Code Signing 2010 CA
                Issued by: VeriSign Class 3 Public Primary Certification Authority - G5
                Expires:   Fri Feb 07 17:59:59 2020
                SHA1 hash: 495847A93187CFB8C71F840CB7B41497AD95C64F
                    Issued to: My Company
                    Issued by: VeriSign Class 3 Code Signing 2010 CA
                    Expires:   Thu Jan 15 17:59:59 2015
                    SHA1 hash: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    The signature is timestamped: Tue Mar 05 15:25:53 2013
    Timestamp Verified by:
        Issued to: Thawte Timestamping CA
        Issued by: Thawte Timestamping CA
        Expires:   Thu Dec 31 17:59:59 2020
        SHA1 hash: BE36A4562FB2EE05DBB3D32323ADF445084ED656
            Issued to: Symantec Time Stamping Services CA - G2
            Issued by: Thawte Timestamping CA
            Expires:   Wed Dec 30 17:59:59 2020
            SHA1 hash: 6C07453FFDDA08B83707C09B82FB3D15F35336B1
                Issued to: Symantec Time Stamping Services Signer - G4
                Issued by: Symantec Time Stamping Services CA - G2
                Expires:   Tue Dec 29 17:59:59 2020
                SHA1 hash: 65439929B67973EB192D6FF243E6767ADF0834E4
    Cross Certificate Chain:
        Issued to: Microsoft Code Verification Root
        Issued by: Microsoft Code Verification Root
        Expires:   Sat Nov 01 07:54:03 2025
        SHA1 hash: 8FBE4D070EF8AB1BCCAF2A9D5CCAE7282A2C66B3
            Issued to: VeriSign Class 3 Public Primary Certification Authority - G5
            Issued by: Microsoft Code Verification Root
            Expires:   Mon Feb 22 13:35:17 2021
            SHA1 hash: 57534CCC33914C41F70E2CBB2103A1DB18817D8B
                Issued to: VeriSign Class 3 Code Signing 2010 CA
                Issued by: VeriSign Class 3 Public Primary Certification Authority - G5
                Expires:   Fri Feb 07 17:59:59 2020
                SHA1 hash: 495847A93187CFB8C71F840CB7B41497AD95C64F
                    Issued to: MyCompany
                    Issued by: VeriSign Class 3 Code Signing 2010 CA
                    Expires:   Thu Jan 15 17:59:59 2015
                    SHA1 hash: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    Successfully verified: fileA.bin
    Number of files successfully Verified: 1
    Number of warnings: 0
    Number of errors: 0
    =========================================
    As best as I can tell, this follows the kernel mode signing walkthrough doc, and assuming
    VS 2012 is doing the signing correctly, the driver package should have been signed correctly.
    The problem is, I still see the same error on the target machine.
    I've tried manually installing the code signing certificate in the target's Trusted Publisher Store,
    prior to installing the driver, but this does not keep the error from showing up.
    I honestly have no clue why. If the driver package files check out OK with the signtool on the signing
    machine, I'm at a loss for why the error shows up on the machine where I'm installing the driver.
    One other thing that is different is the code signing certificate's certification path When I insepct
    it on the target machine. It appears to have a different Root and (only one) intermediate certificate.
    The Verisign folks said this is "OK" because different machines have different certificates. I'm not
    sure I'm buying this statement. Does it make sense to you guys?
    The folks at VeriSign also told me I do not need ANY of the certificates used in signing the driver to
    be installed on the target machine. Does this make sense to you guys? I'm a little skeptical about
    that assumption too, but I haven't found any information on line to confirm or negate it.
    I'm really no further along in determining why I'm getting this error on my target machines.
    Does anything here look out of place to you?
    I'm half tempted to manually sign the driver package to is there's something going on inside the VS 2012
    IDE that could be causing this.
    Again, thanks for taking your time to read this.
    Geoff

  • I uploades photos from my camera but cannot locate them

    I uploaded photos to iphoto from my camera but I cannot locate them. thought it might be a bad cord so i used a good cord with another set of photos and I cannot locate them either.  Unfortunately I deleted them from my camera. I've been having trouble with my library.  Events moving around for some reason.  Could I have too many photos?  I have 63,000 but still plenty of room on my hard drive.  Help please

    Are they not in the Last Import smart album at the left?  Try sorting the Events by Date - Descending so that the last imports will be at the top of the screen.  See if you can find them near or at the top.
    Note:  always make sure the uploading of photo was successful before deleting the photos from the camera by reformatting the memory card with the camera.   A much safer work flow.
    OT

Maybe you are looking for

  • FI-AR-CR: Adding new custom field to FD32

    Hi, We need to add a custom field to FD31/FD32/FD33 transaction that is going to be feed by another develpment that we have. I searched in customizing but no luck. I found some info that i need to do one (or both) steps: 1) Add a screen field to the 

  • Photo losing color/contrast when using "save as" to save it.

    When I first started using CS6 I would edit my photos and when I used "save as" to save my photos then open them in a different photo viewer they would have lost a lot of color and contrast. When I reopened them in CS6 they still had no color. This i

  • Saving space on your Hard drive & I tunes

    HI I am new to the Ipod. Is it possible to load your songs into Itunes on your comnputer. Them upload them to the Ipod. Then deleate them from your hard drive on your computer ??? When the next time you conect your ipod to the computer will the uploa

  • New folders being created... Not by me

    How can I stop iTunes from automatically changing the way I organize my folders. For example, I ripped a Johnny Cash greatest hits CD. I edited the songs in the folder and on iTunes to only say Johnny Cash as the artist, instead of Johnny Cash w/ Jun

  • QN - partner

    hello, What is the importance of coordinator in Notification Partner function the person who creates notification will become coordinator or he / she has to manually enter the other person. If automatic QN creation based on inspection result rejeccte