Argh can't get the driver to work!!!!!!!!!!

I've been working on this for the past 5 hours and I'm on the verge of playing base ball with the zen. I have a Zen Xtra. I tried loading the Play For Sure Firmware but the thing jammed. So I stopped and my player rebooted into the Rescue mode. I tried "Reload Os" and I tried to update the firmware. But the thing wont connect. Windows XP SP2 sees it but says it cannot install the driver. I installed all three drivers on the CD then installed the update from Creative...nothing. It won't install the driver...it keeps saying it's not connected?Now my player is OS less and I can't put a new one in... Why?Please help I'm really really desperateMessage Edited by Prosis on 2-05-20060:27 AM

Try sliding the words instead of tapping them.

Similar Messages

Can't get the software to work with Audigy 2

Hi, I have had my Audigy 2 ZS going on a year now and haven't had any problems. I recently made a clean install of Windows XP and upgraded to SP2 and all that. Now, I can get sound out of the card but can't get the software to work at all; cannot get the volume slider bar to appear when I click the icon (it appears in the task bar though and I get a small gray square where the slider should appear), the surround mixer does not show when I double click the volume icon, EAX conxole is a no go, get an empty error box when I try to start the Equaliser.
I have tried everything from simple re-install to clean sweep to praying to the pagan gods. I have alsoo tried updating the drivers of course.
I run XP on an Intel MoBo (on-boeard sound deactivated), 52RAM, ATI 9700 ALL-IN-WONDER.
DOES THE CREATIVE SOFTWARE DEPEND ON ANY WEIRD LITTLE WINDOWS SERVICE OR SETTING THAT I MIGHT HAVE CHANGED DURING SETUP?
This is quite infuriating as any idea I come up with takes up a lot of time in installation, uninstallation and clean up. It worked before, why not now?
Thanks in advance. dentore

Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
CAT I hope you fix your sound card. Good luck.

Satellite A210-11P - can't get the Camera to work

Hey
i have the Satellite A210-11P and i just can't get the Camera to work on it,
it will yurn on for two seconds and then shut itself off and 'No Preview' Appears.
Any help on this would be greatly appreciated.
Kris

Hi,
Have you tried you to reinstall/update it? Download camera assistant from [Toshiba driver page|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] Remove the previous one and restart the laptop. Then, install downloaded one

Where can I get the driver for my HP DE8A4L external USB CD/DVD drive?

Where can I get the driver for my HP DE8A4L external USB CD/DVD drive?
On the label it says, Model HSTNN-PD06-91
and
HP PN: 518819-001 Rev.B
I've had my Mini 110-1000 running our music system for a couple of years, no complaints. When I wanted a CD/DVD drive, I purchased a DE8A4L external USB drive directly from HP. It didn't come with a driver disc. When I plug it in, the USB subsystem does not enable it. Device Manager shows a yellow exclamation point, saying, "Windows cannot load the device driver for this hardware..." It is running Windows XP Home Edition SP3.
What gives with this device?

Following up on tactic 2) above, I upgraded the BIOS from version F07 to the latest version available on the HP download site, version F19. This went well, but unfortunately the system still does not recognize the device.
When I try to Device Manager, and select the DE8A4L DVD device, and try "search for a device driver", it says it cannot find a better match for the driver already installed.
This Mini 110-1000 only came with 1 Gb RAM, and Windows XP Home. Is one of these a critical limitation for running an external USB DVD drive?

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

do u have your ipad doing airplay because that could happen

I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn ato downloads it defaults back to off, can anyone help?

I have just got a iPhone 4s and I can't get the iCloud to work, everytime I turn on auto downloads it defaults back to off, can anyone help?

Welcome to the Apple Community.
Check you are logged into your store account properly (settings > store). Also check there are no restrictions set that might be causing this (settings > general > restrictions)

I want to pair my iPad mini with my win7. how can i get the driver?

i want to pair my iPad mini with my win7. how can i get the driver?

Pair it for what purpose? If you mean over Bluetooth only certain things are supported for Bluetooth on the iPad.
You can read more here.
http://support.apple.com/kb/HT3647

I have just won an iphone 3gs in a raffle but when i put in my sim it tells me that it is not supported how can i get the iphone to work

I have just won an iphone 3gs in a raffle but when i put in my sim it tells me that it is not supported how can i get the iphone to work?

In that case the procedure assuming it is a PAYG phone is to get an o2 PAYG sim, put £20 on it and then make a few calls making sure you leave £15 on the sim to pay for the unlock. Then there is an online unlock request form on the o2 site just fill this in. It takes between 1-14 days and you get a message from o2 telling you how to complete the official unlock through iTunes.
I got my o2 unlock in nov 09 so this is not just opinion.

How can i get the speakers to work properly? they have a lot of static and scratchiness from them

how can i get the speakers to work properly, they have a lot of static and scratchiness coming from them?

I found my answer in this thread:
https://discussions.apple.com/message/16646999#16646999

How can i get the SSO to work successfully?

How can i get the SSO to work successfully? I followed the note for configuring infoview with ad sso using kerveros & .net.
Adding the AD group into the win ad authentication configuration page creates the user group but the members of the group aren't being pulled in when I go to the group and select / query the users tab

Bart,
By default the setting for update options on the Windows AD tab of authentication does not actually create the aliases until the user attempts to login the first time. We set it this way to prevent a huge group of alias's being created when the administrator sets up Windows AD and also so that only user aliases for users actually using the system get created. You can change this behaviour though if you like. Simply change the radio button option to 'New Aliases will be added and new users will be created' this will create the accounts for you when you hit the update button. If you have a large group your adding I would wait until and afterhours time when you have less activity as this will impact CMS performance while it creates all the accounts.

I disconnected my Ipod classic from a receiver in "user" mode and now I can't get the Ipod to work via USB in my car or receiver. HELP!!

I disconnected my Ipod classic from a receiver in "user" mode and now I can't get the Ipod to work via USB in my car or receiver. HELP!!

See the following for how much you will have to pay for the exchange.
Apple - Support - iPod - Repair pricing

After update to OS4.2.1 I can not get the ringer to work for incoming calls

after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

HT4623 iPad 3 how can l gets the SIM card works With iPad 3

As all we know its christmas time l just received the gift for iPad 3 & l notice that it need SIM card for me to use as the phone & data,how can l gets the SIM card works With iPad 3

Remember am in South Africa & we got few carrier nets am in MTN provide & I c my sim looks so big to fit on my iPad

TS3274 How can I get the volume to work?

We have an iPad but can't get the volume to work?

Alright now if you are talking about issues using Safari, here a few things that you can try.
1. Quit Safari completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. Clear Safari. Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

I can't get the arsenalplayer to work on my mac

I can't get the "arsenalplayer" to work on my macbook pro.

adamfromaltrincham wrote:
snip
Feeling confident about the new season, without Modric?
snip
Ouch
I now live far from the UK so it's all vicarious, nobody over here knows who Arsenal or the Spurs are, but they all know Man Utd.
Try Firefox

Argh can't get the driver to work!!!!!!!!!!

Similar Messages

Maybe you are looking for