Argh! Updated ipod 4G software. Worked fine for a day now showing ZERO song

Updated my 4G 40gb iPod and for a day everything was fine. Now iTunes is telling me to restore iPod to factory settings and iPod itself shows 0 songs but still 8 GB left on ipod. What should I do? I had over 4,000 songs on there!

I'm also having problem in here after taking that new update 10.1. My 40 Gb's iPod 2.3 have asked many times to set it for factory settings. So I set it to factory settings and drive that latest updating to it. Then I try to correct it with Drive 10 hard drive program and checked one more time with Disk Utility, but it's still acting odd. In Preferences>Main menu there is such kind of a menu than importing photos. I think that haven't been there earlier and it should not be there, because it's not any Photo iPod. Why to import photos with using it when I can use it like a hard drive and keep thousands of photos there anyway.
There must be something odd in that latest update and I hope to find that earlier update somewhere. Do you happen to have it? If you do can you please send that to me. I have moved mine in trash. I also would be very thankful if someone do have better advises for what to do next.

Similar Messages

  • I updated my OS to 10.10 Yosemite all apps worked fine for two days -now I can't open AI. help.

    I get a window that says "The application “Adobe Illustrator CS5.1” is not open anymore."

    I tried downloading the newer Itunes, it didn't change anything in my Ipod Touch that apple ID still won't work. When I first updated to the 10.6 I was using a very old version of Itunes and it changed a lot in my ipod which I think had something to do with it now messing up.

  • My LG G3 has stopped receiving email from my pop3 road runner account.  It just has an "updating" message.  It worked fine for the first two weeks and nothing now.  Any advice?

    My LG G3 has stopped receiving email from my pop3 road runner account.  It just has an "updating" message.  It worked fine for the first two weeks and nothing now.  Any advice?

    This started about 3 days ago.  I could manually push email through in the last few days but can no longer.  I have deleted the account and re-entered the settings but I get a message that I cannot connect to the server.

  • Mail worked fine for 2 days on Lion and now I've restarted and get spinning ball.  Can't access my mail.  At all. Osx 10.7.1 2.26 Ghz Macpro

    Mail worked fine for 2 days on Lion and now I've restarted and get spinning ball.  Can't access my mail.  At all. Osx 10.7.1 2.26 Ghz Macpro

    The settings seems to be correct...As you were able to ping the ip 192.168.1.2,it should open the setup page..Try to disable the firewall,ant-virus and other security software if any and then,try...Also try to adjust the browser settings on the computer... Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...Now try..
    It should work now...If not then,you have to reset the router and need to reconfigure it again..

  • OK... so now I can pin a tab so it will always be there... so what the heck happen to all my tabs that were pinned? Worked fine for awhile so now what...???????

    OK... so now I can pin a tab so it will always be there... so what the heck happen to all my tabs that were pinned? Worked fine for awhile so now what...???????

    App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data [1] in the file sessionstore.js [2] in the Firefox profile folder [3].
    Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
    * https://support.mozilla.com/kb/Clear+Recent+History
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js
    * [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox
    It is also possible to use:
    * [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
    If you use cleanup software like CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

  • Firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience. I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to s

    firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
    I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to start Firefox, even in safe mode. i have checked with latest antivirus softwere also.. i didn't find any thing suspicious.
    == This happened ==
    Every time Firefox opened
    == after loading firefox 3.6.6 ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

    I was having this problem few days ago,and I have fixed.Try this steps-If you have AVG antivirus so go on firefox>Tools>Add On and Disable AVG safe search and AVG tool bars too.Then restart computer.

  • I'm having an intermittent problem with my midi controllers triggering Mainstage 3. I'm using a PreSonus Firebox audio interface. It's been working fine for months, but now when I first turn on the computer in the morning , I'm not able to trigger Ma

    I’m having an intermittent problem with my midi controllers triggering Mainstage 3.
    I’m using a PreSonus Firebox audio interface.
    It’s been working fine for months, but now when I first turn on the computer in the morning , I’m not able to trigger MainStage from the keyboard.  I tried different midi controllers, different keyboards, different midi cords, and check midi preferences.  The audio interface is working fine and is recogonized, but the midi doesn’twork.  I re-started the computer several times and then finally it miraculously starts working again.
      I’ve been having to this every day now.  Any help or ideas is very much appreciated.

    I Had the same problem with a FireStudio. Try unplugging the FireWire plug and the power plug. Wait for a few seconds, then plug both back in. The light on my FireStudio was flashing blue/red which means "not connecting." I did what I just described, and everything works again. Hope it works for you.

  • My iPhone 4 was run over at work worked fine  for 5 days then got really hot and shut down. I can not get it to power back up. I have photos that were not backed up is there anyway that I can retrieve my photos from the phone?

    MY iPhone 4 was run over at work by a forklift the screen was badly cracked but other than that worked fine for 6 days. Then it got really hot while charging and shut down and will not  power back up. I have photos on this phone that we're not backed up to I cloud is there any way to retrieve my photos from this phone?

    No. You probably should have backed it up while it was working during those 6 days...

  • My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premier

    My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premiere Pro CC.  I am on a PC withe Windows 8.1 and apps are up to date.  Thanks much for any help!!

    Hi Bryan,
    My video i have successfully worked on for seven days now won't open at all.  It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load.  But the only option from the error screen is exit out of Premiere Pro CC.  I am on a PC withe Windows 8.1 and apps are up to date.  Thanks much for any help!!
    Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
    Hope that works for you.
    Kevin

  • Updated my iphone 4 to 7.0.2 yesterday, worked fine for an hour, now phone wont even turn on??? anyone else have this problem?

    I have an iphone 4, updated it to IOS 7.0.2. yesterday, it worked perfectly for a while,  now cannot even turn my fone on...
    anyone else have this problem ??
    thanks

    Hey xxikearnsxx,
    When troubleshooting power issues, the following article provides the most relevant information:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks,
    Matt M.

  • Extend a network worked fine for 2 years, now it doesn't

    Sorry I'm not at home so I've gotta go off bad memory...
    My setup has worked fine for a number of years.  A non-simultaneous dual band Extreme is the main base station.  I have a Express ethernet-ed to the network working without issue.  There's also a newer Extreme farther away that has been wirelessly extending the network without too much issue until now.  Airport Utility pops up now saying the newer Extreme is unable to extend.  All I attempt to do is restart because all my settings seem to have been fine.  Original base set to create with extend checked, and the newer Extreme set to extend with the same ssid, password etc.
    So what's changed if I haven't changed anything?  Newer versions of something?
    Thanks for any input.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • X-FI worked great for one day, now system won't boot up - NMI: Parity Check / Memory Parity Er

    I can get the system to come up in safe mode, but can't get it to come up normally. I installed the card on Saturday and it worked great with no issues (played about 4 hours of WoW with it). The machine booted up fine at least 3 times yesterday. This morning, it won't come up normally at all: BSoD:
    NMI: Parity Check / Memory Parity Error - The System has Halted
    I made a restore point prior to installing the X-FI drivers yesterday, so I am going to go ahead and go back to that point and hope the system comes up. If it does, then there is a serious problem with the X-FI drivers.
    My system is a standard Intel chipset running a Pentium 4, 3.8 Ghz - single core, non-64 bit with 2 Gigs of Ram.
    I will post back on here if I have any luck with the restore point.

    Memory chips are pretty vulnerable these days. The first week I had my PC I tested my memory with memtest and all was fine. A week later, I began getting BSODs, but every time because of a different driver or module. So I retested it and it wasn't OK anymore. Send it back, got a new one. Worked for a month, then same problems! The 3rd time was the good one... The memory lasted, but my Power Supply broke! After replacing everything is fine for a year now... I don't know if there is any connection, but I think my PSU was eating my memory sticks.
    But anyway, I hope your BSOD is just a "statistical" one.

  • Iphoto 09 worked fine for a week  - NOW NOTHING!!

    So I upgraded to Iphoto 09 last week and everything worked fine. This weekend I did the facial recognition process across 40 k photos. It took almost 30 hours but completed the process and yesterday everything seemed to be working just fine.
    Today I get this new message "The Photo library needs to be upgraded to work with this version of Iphoto"
    Then we get a long wait and the message "examining photo library" followed by an excruciatingly long wait and a new message : YOU cant open your current library with this version - you have made changes using a newer version"
    Not true - I am opening the NEWLY loaded version - have checked 5 times or more today
    What can I do to fix this please

    If the Command-Option technique doesn’t work: Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • Colors not showing up in Photoshop. Worked fine the first day, now when I click on a color it comes out in gray tones. Pop up about RAM storage?

    Just downloaded Photoshop and there was a pop up box that mentioned my RAM and something about not enough RAM left for certain 3D features, filters, and image/color graphics(?). I continued. Everything was working fine the first time I went to use it, but the next day I opened the program and could not get any colors to show up. How can I fix this?

    Go to Image>Mode and make sure you color is RGB, not gray scale. Also, a preference reset might help: Ctrl/Cmd+Alt/Opt+Shift as you initiate Photoshop startup.
    Benjamin

  • College requested I install firefox in order to operate within Blackboard. Has been working fine for one week, now unable to use enable HTML button. Getting incompatible browswer message and firefox version unknown. How do I fix?

    Very frustrating - I have done all of the plug-in checks. Everything is up to date. I have re-booted my computer. The college is using Blackboard version CE8.0.5. I am Windows XP. What else do you need to know?

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

Maybe you are looking for

  • How To Install OS on Raid0?

    My system is a bit over two years old now, and has served me well in that time thanks to a lot of advice from this forum.  It's weak link is a Toshiba SSD used for the boot drive, that is not even as fast as a decent HDD.  Yesterday I suffered a seri

  • Bootcamp XP wont recognize my wifi interwebz

    ok i watched about 5 videos explaning detail by detail how to install bootcamp and windows xp, so therefore i did nothing wrong there, i did all that, and then when i reboot and hold the option keys the things come up i select XP and then i go into n

  • Maximum storage space for iTunes

    Is there a maximum number or size for my music library?

  • Audio ouput jack is mono though the speaker balance feature is working.

    I have an Inspiron N5110 laptop running Windows 7 and I've discovered that when playing audio files via the audio jack the sound is mono. This is the case for music, stereo output testing websites and also for the "configure option" sounds in "settin

  • Getting an error when i try to define Report Sever

    Hi, We have installed Oracle Application Server 10gR2 (10.1.2), when i try to define report sever with the below command, rwserver server=rep_fsprod but i am getting the error as The procedure entry point kge_reuse_guard_fr could not be located in th