Ariba 8.1 connector with ECC 6.0
Hi ,
Is Ariba 8.1 connector compatible with ECC 6.0?
If not what could be a probable solution?
Thanks
Amit
Hi,
latest ITS standalone version was 6.20.
But this can not be used with systems based on 7.0 kernel. Here you should use the integrated ITS.
You can also have look at Notes 905135 and 197746.
Regards
Guido
Similar Messages
-
Hi,
Could any one get me the SAP document for compatibility of Business Connector with ECC.
Their help is highly appreciated.
Regards,
Gopinath Addepalli.hi,
there's no new version/update of BC for ECC
so you can only use the same interfaces
as with R/3 (idoc, RFC)
Regards,
michal -
Business Connector work with ECC 6.0 or have to switch over to PI - Upgrade
Hi
Client want the upgrade their current SAP system from 4.6C to ECC 6.0.
Like to know if Business Connector would work with ECC 6.0 or they have to switch over to PI.
Please Help
Thanksi think BC will work ,
chek the below thread for
what are abaper tasks during upgrade to ECC 6.0
what are abaper tasks during upgrade to ECC 6.0?
pls reward points if helpfull
regards
kummari
Edited by: kummari on Jul 4, 2008 8:05 AM
Edited by: kummari on Jul 4, 2008 8:20 AM -
Calling BAPI from VB with ECC 6.0
I have a Visual Basic 6 application that calls some standard BAPI's in a SAP R/3 system using Frontend 4.6d in order to upload data. It also calls some custom RFC enabled ABAP to download data.
We are upgrading to ECC 6.0 with SAP GUI 7.1.
Can anyone tell me if I can still call BAPI's from VB6 or will I need to upgrade to VB.net? Are there any changes to references in VB that I will need to make?
Thanks!!
Edited by: Jolene Roell on Feb 20, 2009 8:33 AMWell I could never figure out a way to call a BAPI from VB6 with ECC 6. I ended up creating a VB.net dll using the SAP connector to call the BAPIs. I could then call the dll from my existing VB 6 program. That cut down on the recoding that I had to do.
-
Details of SAP. Net Connectors with SAP
Hi,
Does SAp.Net Connector Supports mySAP ECC 5.0 Version are else any additional software or upgrade or any pulgins to be added.
Can any one send me the Flow chart of how to connect SAP.Net connector with SAP, I ment the Process Methodology.
Any suggestions will be much Appreciated.
Thanks & Regds.
RameshHi Ramesh,
U ll find all details for the implementaion of SAP.Net Connector in this link...
http://help.sap.com/saphelp_nw04/helpdata/en/b4/79cb9463b89a41a73e1e2805eb4bf7/frameset.htm
The following link gives u the programmers reference:
http://help.sap.com/saphelp_nw04/helpdata/en/27/3fef6927ad044da62dee1b86d68ec2/frameset.htm
and u can use this link:(esp from page 4)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb4dc990-0201-0010-429a-bf43852a6895
regards,
Manikandan R -
How is the integration with ECC in SRM 7.0??
Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
ThanksSRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish -
Setting up SNP with ECC at a macro level
Hello experts
What are the different scenarios that can be set up with SNP - ECC - SNP with respect to Distribution planning ?
Meaning stock transfers , assuming PPDS will be active and will only be used for creating PPDS planned orders.
We have 10 plants and 34 DC's and regional DC's.
Thank you.
Regards
KKHI KK
This is more an architecture question that has to be addressed at macro level.
Assuming your demand is coming from DP or somewhere outside, a SNP run either SNP Heuristics or CTM or optimizer could be setup to move that demand from DCs to Plants. Then you run the planing runs at each plant in PPDS producing planned orders in short term and SNP run for medium to long term. If you have external procurement, the system creates purchase reqs.
If your plants are sourcing your DCs and then to regional DCs, you may want to run this in 3 stages, first SNP from regional DC to DC, then DC to plant and finally at Plant.
At one of our projects, we separated the SNP runs into Heuristic( where these is no capacity issue) and some into CTM ( where there are more constraints).
Based on the scenario, you may choose to integrate these planed orders, purchase reqs. from SNP/PPDS to ECC and execute there.
You may also run a deployment run from the plants to DCs and not integrate these deployment reqs. with ECC ( as you would not execute them yet), then finally convert these deployment reqs. into STOs/POs and then push these to ECC for execution.
There are infact so many possibilities based your business need. You may take above as a frame work. Hope this helps. -
Configuring DBAT 9.1.0.5 connector with PostgreSQL database in OIM 11g
Hi,
I am trying to configure the DBAT 9.1.0.5 connector with PostgreSQL database in OIM 11g (11.1.1.5.0), thou' in the connector document the suppot for this postgres is not mentioned.
So, as mentioned for other databases that the JDBC driver has to be copied to $JAVA_HOME/jre/lib/ext, I have also copied the postgres driver to the specific folder but while trying to configure the connector, I am getting the error as 'No suitable driver found'. Following is the stacktrace snippet.
SEVERE: Class/Method: DBFacade/getConnection encounter some problems: No suitable driver found for jdbc:postgres://funereus.stadi.sonera.fi:5432/DEV1_DIGSIG
java.sql.SQLException: No suitable driver found for jdbc:postgres://funereus.stadi.sonera.fi:5432/DEV1_DIGSIG
at java.sql.DriverManager.getConnection(DriverManager.java:602)
at java.sql.DriverManager.getConnection(DriverManager.java:154)
at org.apache.commons.dbcp.DriverManagerConnectionFactory.createConnection(DriverManagerConnectionFactory.java:51)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:840)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:95)
at com.thortech.xl.gc.impl.common.DBFacade.getConnection(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getMetadata(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getDBType(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getSchema(Unknown Source)
at com.thortech.xl.gc.impl.recon.DBReconTransportProvider.detectMetadata(Unknown Source)
at com.thortech.xl.gc.impl.recon.DBReconTransportProvider.getMetadata(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorAction.getGenericAdapter(CreateConnectorAction.java:2202)
at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(CreateConnectorAction.java:1196)
at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(CreateConnectorAction.java:521)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Caused by: java.sql.SQLException: No suitable driver found for jdbc:postgres://funereus.stadi.sonera.fi:5432/DEV1_DIGSIG
at java.sql.DriverManager.getConnection(DriverManager.java:602)
at java.sql.DriverManager.getConnection(DriverManager.java:154)
at org.apache.commons.dbcp.DriverManagerConnectionFactory.createConnection(DriverManagerConnectionFactory.java:51)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:840)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:95)
... 62 more
SEVERE: Class/Method: CreateGenConnectorAction/imageScreen encounter some problems: Provider Exception
java.lang.Exception: Provider Exception
at com.thortech.xl.webclient.actions.CreateConnectorAction.getGenericAdapter(CreateConnectorAction.java:2265)
at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(CreateConnectorAction.java:1196)
at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(CreateConnectorAction.java:521)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
I am using postgresql-8.4-703.jdbc4.jar and Driver class as org.postgresql.Driver
some suggestions on this would be highly appreciated.
Thanks
SidThanks guys for the quick responses.
But I have tried both the options for putting the jar in Third Party and also by uploading using the OOTB utility UploadJar.sh.
But it is giving the same error.
I have tired rebouncing the server and also Purge cached, but no success.
Just to mention again, I have tried with all the last 3 postgres JDBC4 driver available on the site (u mentioned).
So, any other clue?
Thanks in advance. -
I am using the Oracle Internet Directory 11.1.1.5.0 connector with OpenLDAP as my target system.
Every time I run the "LDAP Connector User search Reconciliation", I see the following error for each user.
<Feb 21, 2013 3:54:57 PM EST> <Error> <ORACLE.IAM.CONNECTORS.ICFCOMMON.RECON.SEARCHRECONTASK> <BEA-000000> <oracle.iam.connectors.icfcommon.recon.SearchReconTask : handle : Recon event skipped>
The reconciliation events do get generated in OIM and the reconciliation engine does link the account when a user match is found.
I am wondering what is causing that error to be thrown and whether if performance of the LDAP reconciliation is affected by this error.Any updates i am facing same problem.
thanks in advance -
I need help after a software update, anyone else with similar problem????
Today I went to recharge battery, iTunes pop-up indicated new software version.
I OK's the download and now the phone does not appear to be working. I've tried holding down home key and power switch for 10 seconds.
My display shows pic of a connector with an arrow pointing at the iTunes icon. No other response from phone.http://support.apple.com/kb/TS1538
-
SAP SRM 7.0 with ECC EHP 4 components to execute scenario
Hi All,
I am new to SAP SRM 7.0.Could you please let me know that what are all the components needs to be in place to execute the technical scenarios and business scenarios.I had an hands on experience on SAP SRM 5.0 with ECC 6.0 backend.
Some where i read that there are lot of configuration changes when we integrate SRM 7 with ECC EHP 4.Do we need to have PI 7 for executing Centralized contract and plan driven procurement scenario?Please guide me to have some exposure towards higher version.Thank you in advance.
Best Regards,
praveenHello,
You can refer the INSTALLATION AND UPGRADE INFORMATION , Master guides etc maintained at the below mentioned location which will answer all your query's here.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 .
Best Regards,
Rahul -
RFC & Excel VBA with ECC 6.0
I use a routine like this to post movements in R/3 (This is an example for MB1A Transaction) based on information posted on a excel spreadsheet + VBA and seudo-code created with SM35 transaction
Public Sub updateRFC_BDC()
'Set sheet specific variables / constants
j = 0
startRow = 3
colStatus = 1
colMsg = 1
' Cell information on the excel spreadsheet
colMKPF_BLDAT = 2
colMKPF_BUDAT = 3
colMKPF_OIB_BLTIME = 4
colRM07M_BWARTWA = 5
colRM07M_WERKS = 6
colRM07M_LGORT = 7
colXFULL = 8
colRM07M_WVERS3 = 9
colMSEG_MATNR = 10
colMSEG_ERFMG = 11
colMSEG_ERFME = 12
colMSEG_WERKS = 13
colMSEG_LGORT = 14
colMSEG_CHARG = 15
colMSEG_OIHANTYP = 16
colOIB_A08_TDICH = 17
colOIB_A08_TDICHEH = 18
colOIB_A08_MTTMP = 19
colOIB_A08_MTTEH = 20
colOIB_A08_TSTMP = 21
colOIB_A08_TSTEH = 22
colOIB_A08_MCF = 23
colDKACB_FMORE = 24
colCOBL_PRCTR = 25
i = 0
'Set debug mode
If CheckBox1.Value = True Then
DEBUG_MODE = True
Else
DEBUG_MODE = False
End If
'Reset status column
Range(Cells(startRow, colMsg), Cells(60000, colMsg)).Value = ""
'Login to SAP, if it fails, notify user and exit sub
updateStatus "Logging into SAP...", colStatus, 1
If Not login2SAP Then
MsgBox "Login to SAP failed. Remote Function Call NOT performed.", vbInformation, "Login Failed"
updateStatus "", colStatus, 1
Exit Sub
End If
'While the next row is not empty loop through BDC
While Trim(Cells(startRow + i, 2).Value) <> ""
firstTime = True
updateStatus "Processing Row " & (startRow + i), colStatus, 1
' Retrieve the Function object (the Connection object must be set up before Function objects can be created):
Set RfcCallTransaction = Functions.Add("RFC_CALL_TRANSACTION")
'Set the export parameters
RfcCallTransaction.exports("TRANCODE") = "MB1A "
RfcCallTransaction.exports("UPDMODE") = "S"
Set BdcTable = RfcCallTransaction.Tables("BDCTABLE")
'Highlight current row so user knows what is happening
Cells(startRow + i, 2).Select
'Screen SAPMM07M BDC code
add_BDCData BdcTable, "SAPMM07M", "0400", "X", "", ""
add_BDCData BdcTable, "", "", "", "BDC_CURSOR", "RM07M-LGORT"
testForBlank_AddToBDC "MKPF-BLDAT", Cells(startRow + i, colMKPF_BLDAT).Value
testForBlank_AddToBDC "MKPF-BUDAT", Cells(startRow + i, colMKPF_BUDAT).Value
testForBlank_AddToBDC "MKPF-OIB_BLTIME", Cells(startRow + i, colMKPF_OIB_BLTIME).Value
testForBlank_AddToBDC "RM07M-BWARTWA", Cells(startRow + i, colRM07M_BWARTWA).Value
testForBlank_AddToBDC "RM07M-WERKS", Cells(startRow + i, colRM07M_WERKS).Value
testForBlank_AddToBDC "RM07M-LGORT", Cells(startRow + i, colRM07M_LGORT).Value
testForBlank_AddToBDC "XFULL", Cells(startRow + i, colXFULL).Value
testForBlank_AddToBDC "RM07M-WVERS3", Cells(startRow + i, colRM07M_WVERS3).Value
add_BDCData BdcTable, "", "", "", "BDC_OKCODE", "=NPE"
'Screen SAPMM07M BDC code
add_BDCData BdcTable, "SAPMM07M", "0410", "X", "", ""
add_BDCData BdcTable, "", "", "", "BDC_CURSOR", "MSEG-OIHANTYP"
testForBlank_AddToBDC "MSEG-MATNR", Cells(startRow + i, colMSEG_MATNR).Value
testForBlank_AddToBDC "MSEG-ERFMG", Cells(startRow + i, colMSEG_ERFMG).Value
testForBlank_AddToBDC "MSEG-ERFME", Cells(startRow + i, colMSEG_ERFME).Value
testForBlank_AddToBDC "MSEG-WERKS", Cells(startRow + i, colMSEG_WERKS).Value
testForBlank_AddToBDC "MSEG-LGORT", Cells(startRow + i, colMSEG_LGORT).Value
testForBlank_AddToBDC "MSEG-CHARG", Cells(startRow + i, colMSEG_CHARG).Value
testForBlank_AddToBDC "MSEG-OIHANTYP", Cells(startRow + i, colMSEG_OIHANTYP).Value
add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPMM07M 2400BLOCK1"
add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPMM07M 2400BLOCK2"
add_BDCData BdcTable, "", "", "", "BDC_OKCODE", "/00"
'Screen SAPLOIB_QCI BDC code
add_BDCData BdcTable, "SAPLOIB_QCI", "0500", "X", "", ""
add_BDCData BdcTable, "", "", "", "BDC_CURSOR", "OIB_A08-TDICH"
testForBlank_AddToBDC "OIB_A08-TDICH", Cells(startRow + i, colOIB_A08_TDICH).Value
testForBlank_AddToBDC "OIB_A08-TDICHEH", Cells(startRow + i, colOIB_A08_TDICHEH).Value
testForBlank_AddToBDC "OIB_A08-MTTMP", Cells(startRow + i, colOIB_A08_MTTMP).Value
testForBlank_AddToBDC "OIB_A08-MTTEH", Cells(startRow + i, colOIB_A08_MTTEH).Value
testForBlank_AddToBDC "OIB_A08-TSTMP", Cells(startRow + i, colOIB_A08_TSTMP).Value
testForBlank_AddToBDC "OIB_A08-TSTEH", Cells(startRow + i, colOIB_A08_TSTEH).Value
testForBlank_AddToBDC "OIB_A08-MCF", Cells(startRow + i, colOIB_A08_MCF).Value
add_BDCData BdcTable, "", "", "", "BDC_OKCODE", "=CONT"
'Screen SAPMM07M BDC code
add_BDCData BdcTable, "SAPMM07M", "0410", "X", "", ""
add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPLKACB 0001BLOCK"
testForBlank_AddToBDC "DKACB-FMORE", Cells(startRow + i, colDKACB_FMORE).Value
'Screen SAPLKACB BDC code
add_BDCData BdcTable, "SAPLKACB", "0002", "X", "", ""
add_BDCData BdcTable, "", "", "", "BDC_CURSOR", "COBL-AUFNR"
testForBlank_AddToBDC "COBL-PRCTR", Cells(startRow + i, colCOBL_PRCTR).Value
add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPLKACB 9999BLOCK1"
add_BDCData BdcTable, "", "", "", "BDC_OKCODE", "=ENTE"
'Screen SAPMM07M BDC code
add_BDCData BdcTable, "SAPMM07M", "0410", "X", "", ""
add_BDCData BdcTable, "", "", "", "BDC_CURSOR", "MSEG-ERFMG"
testForBlank_AddToBDC "MSEG-ERFMG", Cells(startRow + i, colMSEG_ERFMG).Value
add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPMM07M 2400BLOCK1"
add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPMM07M 2400BLOCK2"
add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPLKACB 0001BLOCK"
testForBlank_AddToBDC "DKACB-FMORE", Cells(startRow + i, colDKACB_FMORE).Value
add_BDCData BdcTable, "", "", "", "BDC_OKCODE", "=BU"
'Screen SAPLKACB BDC code
add_BDCData BdcTable, "SAPLKACB", "0002", "X", "", ""
add_BDCData BdcTable, "", "", "", "BDC_CURSOR", "COBL-AUFNR"
testForBlank_AddToBDC "COBL-PRCTR", Cells(startRow + i, colCOBL_PRCTR).Value
add_BDCData BdcTable, "", "", "", "BDC_SUBSCR", "SAPLKACB 9999BLOCK1"
add_BDCData BdcTable, "", "", "", "BDC_OKCODE", "=ENTE"
add_BDCData BdcTable, "TCDEMB1A ", "", "", "", ""
firstTime = False
' Call the function (if the result is false, then display a message):
If RfcCallTransaction.CALL = True Then
Set Messages = RfcCallTransaction.imports("MESSG")
If DEBUG_MODE Then
printBDCTable (startRow + i)
End If
Cells(startRow + i, colMsg).Value = Messages.Value("MSGTX")
Else
MsgBox " Call Failed! error: " + RfcCallTransaction.Exception
updateStatus "Error!", colStatus, 1
End If
i = i + 1
j = 0
Messages.Value("MSGTX") = ""
Wend
logOffSAP
If DEBUG_MODE Then
MsgBox "BDC file written to : " & DEBUG_FILE
End If
updateStatus "Processing Done. Logged off of SAP", colStatus, 1
End Sub
Now I'm trying to use this routine for ECC 6.0, but it looks like the export parameter changed and it is not working.
Could you please help me to debug this routine to make it work with ECC 6.0
ThanksDear Javier Cantini,
Welcome to SCN.
Post your queries in relevant forum. Your query is technical in nature and should be posted in ABAP forums. Moving your thread to ABAP, General forum.
Regards,
Naveen -
Central contract in SRM 7.0 with ECC 6.0
Hi
We are using SRM 7.0 with ECC 6.0
When we create contract in SRM 7.0 & Trying to distribute to Backend as Contract, It is showing error in BBP_PD as below
HEADER I1015 Awaiting Approval
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1141 Released
HEADER I1180 Document Completed
HEADER I1193 In Distribution
HEADER I1195 Distribution Incorrect
0000000001 I1143 Item is Active
Badi BBP_DETERMINE_LOGSY is activated to define backend system
No IDOC is also generated.
No errors in MOnitor also
Not sure what is message type needs to define & what else is needed
Regards,
NNKHI
Need to do following
1. Keep conidtion types in ECC & SRM same for contract.
2. Also Add message types BLAORD & COND_A manually in ECC in WE20.
Then only it works
Regards,
NNK -
List of modules with ECC 6.0
I am looking for information on different module and engine in SAP from licensing perspective , like Netweaver comes wih ECC 6.0. What about Open Hub ? Can anyone kindly provide list of module and what comes with what and how it is set up?
Licensing is what your contract states. Just because Netweaver comes with ECC 6.0 that does not mean you are licensed to use netweaver components like enterprise portal, MDM, BI etc. ECC 6.0 requires only web application server to run and perhaps other basis components, but other pieces of Netweaver are not automatically available to you. Look at something like this to help you with modules of SAP ECC 6 http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
Click on logistics and modules are listed
Mike -
SAP XI 2 BI Integration with ECC 6.0
Dear all,
we are planning to do XI integration between ECC 6.0 to BI
1) How to Get the BI Standard data from ECC 6.0?
2)We are planning to integrate Standard BI reports with ECC 6 0 through XI.
Please sugget the scenario for integration between ECC 6.0 to BI through SAP XI.
Thanks In Advance.
MaheshHi Mahesh,
Please go thru these links
To push data from BW to XI, please check
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20push%20data%20into%20bw%20from%20xi.pdf
To send data from XI to BW please check
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/integrate%20bw%20via%20xi.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
XI-BI Integration unsing RFC
Pushing data from BI to XI using RFC Adapter
https://forums.sdn.sap.com/click.jspa?searchID=17734474&messageID=5878682
Thanks,
Shweta
Maybe you are looking for
-
Hi All, in both ESRepository and Integration Directory we can define more detailed authorization that restrict access to design and configuration objects. [Documentation from SAP|http://help.sap.com/saphelp_nwpi71/helpdata/en/f7/c2953fc405330ee100000
-
Groupwise Messenger Installatio Failed
Good day everybody, I have a problem about the installation of Groupwise Messenger on our server running sles 9. I dont know what do and I appreciate any help from you. Here is the summary of the installation: Summary Tree: ISP Context: o=suse System
-
Power Management Driver wont install - SL500, Windows 7
Hi All, I've been trying to get my blue Fn keys to work on my recently purchased SL500. Volume and screen brightness keys work (but no on-screen display), however Fn+F3 & F5 do nothing, same with the blue ThinkVantage button. I've installed the dri
-
Pre acting up after updating to 1.4
Updated to webOs 1.4 last night but froze during the process, after restarting it and went thru with the update went to the camera icon to try it out but didn't do nothing but a blank screen, went to my music and wouldn't play nothing, also when I ge
-
"Connection failed" message when loading classic app
Hi. Hope this is the right forum. It think so, as follows: I have one Classic app on my computer that I must use for work, two or three times each month (its a great time billing program). Since going to 10.4.6 (Combo update) a few weeks ago, wheneve