ARIS 7.1 with MSSQL 2008 Database?
Hello Experts,
Is it possible to install ARIS 7.1 with MSSQL 2008 Database?
In the standard installation guide they have mentioned only about 2005 server. If I see some online communities of Aris (
http://www.ariscommunity.com/users/rahulrajvanshi31/2010-01-28-does-aris-support-windows-server-2008 ) they mention it is possible. But no details are provided in these posts.
Are there anyone here who have tried ARIS 7.1 with MSSQL 2008 Database?
Regards
Vivek
Hi Vivek,
As far as I know for ARIS 7.1, MS SQL 2008 is supported but only up to version R2 Enterprise Edition. MS SQL 2008 R3 is currently not supported.
I hope this helps.
Roland
Similar Messages
-
ARIS 7.1 with MSSQL 2008 Databse ??
Hello Experts,
Is it possible to install ARIS 7.1 with MSSQL 2008 Database?
In the standard installation guide they have mentioned only about 2005 server. If I see some online communities of Aris (
http://www.ariscommunity.com/users/rahulrajvanshi31/2010-01-28-does-aris-support-windows-server-2008 ) they mention it is possible.
Are there anyone here who have tried ARIS 7.1 with MSSQL 2008 Database?
Regards
VivekHi Vivek,
As stated in Solution Manager thread....
ARIS 7.1, MS SQL 2008 is supported but only up to version R2 Enterprise Edition. MS SQL 2008 R3 is currently not supported.
I hope this helps.
Roland -
MSSQL 2008 - Database size getting smaller after EHP upgrade??
Hi All,
Did anyone observe the DB size of MSSQL 2008 after EHP upgrade?
In my two system, after upgraded to EHP5 and EHP2 respectively, the database is getting smaller compare to before upgrade, estimated 5-10gb.
EHP upgrade is unlike DBEXPORT, it shouldn't have any reorganization features and so do MSSQL.
Any idea?
Cheers,
Nicholas Chang> Right after upgrade is smaller and after sgen, db size is bigger than source.
So it's ok.
> As system was upgrade from ECC6 to EHP5 with Central Application, HCM and Finance .... the after upgrade size should bigger than the source even before SGEN. Your kind input is mostly welcome.
If the source system was compiled completely (using SGEN) then you need to compare the sizes of the target system also, otherwise you compare apple with pies.
Another reason may be that index compression was activated:
Note 1459005 - Enabling index compression for SQL Server
You could now upgrade to SQL Server 2008 R2 and apply
Note 1488135 - Database compression for SQL Server
this will save additional space (30 - 50 %).
Markus -
Problem with crystal report that comes with VStudio 2008 Database edition
Hello,
I'm using crystal reports that comes with Visual Studio 2008 Database edition. But I'm having a problem these days. When there are more than 4 pages in the report, the summary field in the pagefooter(usually sum of data in the Details section) show 0 in the first page.It will be displaying in all other pages. I couldnt sort out the problem.I'm binding data to the report from an SQL Server 2005 table.
Thanks in advance.I really appreciate if some one can sort out the problem quickly.Have not heard of the issue, but download SP1 and see if that helps:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
Configuring backup through DB13 on windows system with mssql as database
Hi
I m using ecc 5.0 with mssql database on windows system.
I have to take backup using DB13. wht configuration steps are there to take backup using db13.
plz suggest me the configuration steps.
plz do the needfull.> Actually my client wants to take backup using db13 on disk..as i m new to mssql.i have configured it on oracle database bt i dont know hw to configure it on mssql.so plz do the needful.
The "needful" thing to do now is to read documentation.
Doing backup is a very crucial part of running a SAP installation, it's just not enough to follow a "click-guide" without knowing what is done. I told you a few approaches to start to dig into that but you seem to ignore them.
I'm really not sure why I should repeat here all the steps listed in the online documentation, such as
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/5b/1f2d61f80f4b26a0a4a96c8bb791ec/frameset.htm
which clearly explains how a backup is set up in DB13/DBACOCKPIT...
Markus -
Need help in migrating MSSQL 2008 database to Oracle 11g
Hi everyone,
So, as stated above I want to migrate our apps database from mssql to oracle as it is what the client wants..
I have absolutely no experience working with Oracle.
My computer is running windows 7 32 bit, our DB people installed a 9i client for me to connect to the server and the my SQL Developer just came straight from the site. (So it's the latest release)
I have one "DBA" access to the database I'm trying to migrate to.
I've downloaded the Oracle SQL Developer and have been attempting to "migrate" our database using the migration tool for 3 days now, but to no avail.
So the error I'm encountering is that the migration just stops, and a popup with the message "Migration actions have failed. Check the migration reports for details. : The connection is closed." comes up.
I have no idea where the migration report can be found. As I cannot find it in the reports tab available.
I'm hoping someone here can have the patience and knowledge to get me through this?The migration report is generally created under the "Documents and Settings" folder under application data/sqldeveloper. Key thing is at what stage the failure occurs?. Does it happen immediately after you start the data migration or after a while?.
If the data migration process fails immediately after the start then there might be an issue with permissions on the source/target databases. Probably it is having trouble with disabling constraints on the target database. Because rememeber SQL Developer will disable constraints before it moves data across. My preference is to give DBA privilege to the Oracle user to avoid just cases or you can disable the constraints yourself by using scripts. Check the source/target database date/time format masks. You can set them up in SQL Developer.
If the data migration process fails after a while and you notice that data for some tables is migrated then you may be running into network timeouts or space issues on Oracle etc.
HTH
Regards
Prakash -
Db13 backup error with mssql as database
Hi
While scheduling the backup through db13 i got the following error msg.i mdoing the backup on disk
Task information ***********
Jobname:
SAP CCMS Full DB Backup of DEV,master,msdb [20090825163455]
Taskname: Step1
Type: TSQL
DB-Name: DEV
Lastrun: 20090826 07:00:01
Nextrun: not scheduled
Created: 2009-08-25 16:34:55.
Command: dev.sap_backup_databases
@dblist="DEV,master,msdb",@r3db="DEV",@bdev="db1
3 backup",@unload=0,@verify=0,@jobname= "SAP CCMS
Full DB Backup of DEV,master,msdb [20090825163455]
Descript: SAP CCMS JOB
Task history information ***********
For run: 20090826 07:00:00
Status: 0 (failure) (see DB error log)
Message: 156
Severity: 15
Duration: 0 hours, 0 minutes, 0 seconds
Duration: 0 hours, 0 minutes, 0 seconds
Last msg: Executed as user: NT AUTHORITY\SYSTEM. DBCC execut
ion completed. If DBCC printed error messages, con
tact your system administrator. [SQLSTATE 01000] (
Message 2528) Incorrect syntax near the keyword '
WITH'. [SQLSTATE 42000] (Error 156). The step failed.
i have set the backup device name as db13 backup. is that the problem.
Plz help meHi Pranav,
Could you please tell us what was the issue so that if any body face the issue again then he will get help from this thread.
Regards
Ashok Dalai -
Hello,
I would like to ask you about advice.
We have MSSQL 2008 R2, 32 bit. Memory is 4GB, split into 2GB for Windows and 2GB for applications. Database has recovery model simple because we have replicated data into other servers ( 2 ). Contemporary we work with 2 servers. Max memory for MSSQL is 2048
MB.
We set the backup as follows:
USE MSDB
GO
DECLARE @JMENO_ZALOHY VARCHAR(120)
SELECT @JMENO_ZALOHY = 'E:\backup\BackupSQL\1 Pondeli\DAVOSAM_'+ convert( varchar(2), datepart( hh, getdate() ) ) + '00_DEN_DIFF.bak'
SELECT @JMENO_ZALOHY
BACKUP DATABASE [DAVOSAM]
TO DISK = @JMENO_ZALOHY
WITH INIT, DIFFERENTIAL, CHECKSUM, COMPRESSION
GO
Every second or third day in log there is error message: 'There is insufficient system memory in resource pool 'internal' to run this query' Accurate in time of backup. The error is still repeat, majority in working hours.
Today I have found out, that problem is probably in compression of backup. Because if I removed word: compression, a backup normally runs without error.
Question: Is my hypothesis correct that problem is in backup with compression?
Thank you DavidHello, today evening I have ran backup command bellow. All is OK. Probably MSSQL has cleaned memory. Next attempt I will try in peak next week.
Since time I have removed word compression, in error log is not any error.
I have checked memory as soon as memory gets on top, it is about 1.707 GB the MSSQL writes into log this messgages:
2014-03-14 15:00:04.63 spid89 Memory constraints resulted reduced backup/restore buffer sizes. Proceding with 7 buffers of size 64KB.
2014-03-14 15:00:08.74 Backup Database differential changes were backed up. Database: DAVOSAM, creation date(time): 2014/01/12(22:03:10), pages dumped: 16142, first LSN: 1894063:1673:284,
last LSN: 1894063:1792:1, full backup LSN: 1894053:15340:145, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'E:\backup\BackupSQL\5 Patek\DAVOSAM_1500_DEN_DIFF.bak'}). This is an informational message. No user action is required.
2014-03-14 15:00:12.79 spid72 Memory constraints resulted reduced backup/restore buffer sizes. Proceding with 7 buffers of size 64KB.
2014-03-14 15:00:12.88 Backup Database differential changes were backed up. Database: WEBFORM, creation date(time): 2014/02/01(05:22:47), pages dumped: 209, first LSN: 125436:653:48, last
LSN: 125436:674:1, full backup LSN: 125435:689:36, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'E:\backup\BackupSQL\5 Patek\WEBFORM_1500_DEN_DIFF.bak'}). This is an informational message. No user action is required.
After that the MSSQL reduced memory on 1.692.
USE MSDB
GO
DECLARE @JMENO_ZALOHY VARCHAR(120)
SELECT @JMENO_ZALOHY = 'E:\backup\BackupSQL\6 Sobota\DAVOSAM_'+ convert( varchar(2), datepart( hh, getdate() ) ) + '00_DEN_FULL.bak'
SELECT @JMENO_ZALOHY
BACKUP DATABASE [DAVOSAM]
TO DISK = @JMENO_ZALOHY
WITH INIT, CHECKSUM, COMPRESSION, MAXTRANSFERSIZE=65536
GO
E:\backup\BackupSQL\6 Sobota\DAVOSAM_2100_DEN_FULL.bak
(1 row(s) affected)
Processed 467240 pages for database 'DAVOSAM', file 'DavosAM_Data' on file 1.
Processed 2 pages for database 'DAVOSAM', file 'DavosAM_Log' on file 1.
BACKUP DATABASE successfully processed 467242 pages in 24.596 seconds (148.411 MB/sec).
select * from sys.dm_exec_connections
where net_packet_size > 8192
session_id most_recent_session_id connect_time net_transport protocol_type
protocol_version endpoint_id encrypt_option auth_scheme
node_affinity num_reads num_writes last_read last_write net_packet_size client_net_address
client_tcp_port local_net_address local_tcp_port
connection_id parent_connection_id most_recent_sql_handle
(0 row(s) affected)
SELECT SUM (pages_allocated_count * page_size_in_bytes)/1024 as 'KB Used', mo.type, mc.type
FROM sys.dm_os_memory_objects mo
join sys.dm_os_memory_clerks mc on mo.page_allocator_address=mc.page_allocator_address
GROUP BY mo.type, mc.type, mc.type
ORDER BY 1 DESC;
KB Used type type
29392 MEMOBJ_SORTTABLE MEMORYCLERK_SQLSTORENG
9392 MEMOBJ_SOSNODE MEMORYCLERK_SOSNODE
8472 MEMOBJ_SQLTRACE MEMORYCLERK_SQLGENERAL
5480 MEMOBJ_SECOLMETACACHE USERSTORE_SCHEMAMGR
5280 MEMOBJ_RESOURCE MEMORYCLERK_SQLGENERAL
5008 MEMOBJ_CACHEOBJPERM USERSTORE_OBJPERM
4320 MEMOBJ_SOSSCHEDULER MEMORYCLERK_SOSNODE
2864 MEMOBJ_PERDATABASE MEMORYCLERK_SQLSTORENG
2328 MEMOBJ_SQLCLR_CLR_EE MEMORYCLERK_SQLCLR
2288 MEMOBJ_SESCHEMAMGR USERSTORE_SCHEMAMGR
2080 MEMOBJ_SOSDEADLOCKMONITORRINGBUFFER MEMORYCLERK_SQLSTORENG
2008 MEMOBJ_LOCKBLOCKS OBJECTSTORE_LOCK_MANAGER
1584 MEMOBJ_CACHESTORETOKENPERM USERSTORE_TOKENPERM
1184 MEMOBJ_LOCKOWNERS OBJECTSTORE_LOCK_MANAGER
840 MEMOBJ_SNIPACKETOBJECTSTORE OBJECTSTORE_SNI_PACKET
760 MEMOBJ_SOSDEADLOCKMONITOR MEMORYCLERK_SQLSTORENG
752 MEMOBJ_SESCHEMAMGR_PARTITIONED USERSTORE_SCHEMAMGR
688 MEMOBJ_RESOURCEXACT MEMORYCLERK_SQLSTORENG
616 MEMOBJ_SOSWORKER MEMORYCLERK_SOSNODE
552 MEMOBJ_METADATADB MEMORYCLERK_SQLGENERAL
480 MEMOBJ_SRVPROC MEMORYCLERK_SQLCONNECTIONPOOL
424 MEMOBJ_SQLMGR CACHESTORE_SQLCP
400 MEMOBJ_SBOBJECTPOOLS OBJECTSTORE_SERVICE_BROKER
384 MEMOBJ_SUPERLATCH_BLOCK MEMORYCLERK_SQLSTORENG
384 MEMOBJ_RESOURCEDATASESSION MEMORYCLERK_SQLGENERAL
352 MEMOBJ_SOSSCHEDULERMEMOBJPROXY MEMORYCLERK_SOSNODE
328 MEMOBJ_SBMESSAGEDISPATCHER MEMORYCLERK_SQLSERVICEBROKER
320 MEMOBJ_METADATADB USERSTORE_DBMETADATA
296 MEMOBJ_INDEXSTATSMGR MEMORYCLERK_SQLOPTIMIZER
264 MEMOBJ_LBSSCACHE OBJECTSTORE_LBSS
224 MEMOBJ_XE_ENGINE MEMORYCLERK_XE
216 MEMOBJ_GLOBALPMO MEMORYCLERK_SQLGENERAL
208 MEMOBJ_PROCESSRPC USERSTORE_SXC
200 MEMOBJ_SYSTASKSESSION MEMORYCLERK_SQLCONNECTIONPOOL
200 MEMOBJ_REPLICATION MEMORYCLERK_SQLGENERAL
192 MEMOBJ_SOSSCHEDULERTASK MEMORYCLERK_SOSNODE
176 MEMOBJ_SQLCLRHOSTING MEMORYCLERK_SQLCLR
168 MEMOBJ_SYSTEMROWSET CACHESTORE_SYSTEMROWSET
128 MEMOBJ_RESOURCESUBPROCESSDESCRIPTOR MEMORYCLERK_SQLGENERAL
128 MEMOBJ_CACHESTORESQLCP CACHESTORE_SQLCP
128 MEMOBJ_RESOURCESEINTERNALTLS MEMORYCLERK_SQLSTORENG
120 MEMOBJ_BLOBHANDLEFACTORYMAIN MEMORYCLERK_BHF
120 MEMOBJ_SNI MEMORYCLERK_SNI
88 MEMOBJ_QUERYNOTIFICATON MEMORYCLERK_SQLOPTIMIZER
72 MEMOBJ_HOST MEMORYCLERK_HOST
72 MEMOBJ_INDEXRECMGR MEMORYCLERK_SQLOPTIMIZER
64 MEMOBJ_RULETABLEGLOBAL MEMORYCLERK_SQLGENERAL
56 MEMOBJ_SERVICEBROKER MEMORYCLERK_SQLSERVICEBROKER
56 MEMOBJ_REMOTESESSIONCACHE MEMORYCLERK_SQLGENERAL
56 MEMOBJ_PARSE CACHESTORE_PHDR
48 MEMOBJ_CACHESTOREBROKERTBLACS CACHESTORE_BROKERTBLACS
48 MEMOBJ_APPENDONLYSTORAGEUNITMGR MEMORYCLERK_SQLSTORENG
40 MEMOBJ_SBASBMANAGER MEMORYCLERK_SQLSERVICEBROKER
32 MEMOBJ_OPTINFOMGR MEMORYCLERK_SQLOPTIMIZER
32 MEMOBJ_SBTRANSPORT MEMORYCLERK_SQLSERVICEBROKERTRANSPORT
32 MEMOBJ_CACHESTOREBROKERREADONLY CACHESTORE_BROKERREADONLY
32 MEMOBJ_DIAGNOSTIC MEMORYCLERK_SQLGENERAL
32 MEMOBJ_UCS MEMORYCLERK_SQLSERVICEBROKER
24 MEMOBJ_STACKSTORE CACHESTORE_STACKFRAMES
24 MEMOBJ_CACHESTORESXC USERSTORE_SXC
24 MEMOBJ_FULLTEXTGLOBAL MEMORYCLERK_FULLTEXT
24 MEMOBJ_APPLOCKLVB OBJECTSTORE_LOCK_MANAGER
24 MEMOBJ_FULLTEXTSTOPLIST CACHESTORE_FULLTEXTSTOPLIST
24 MEMOBJ_CONVPRI CACHESTORE_CONVPRI
16 MEMOBJ_SQLCLR_VMSPY MEMORYCLERK_SQLCLR
16 MEMOBJ_VIEWDEFINITIONS MEMORYCLERK_SQLOPTIMIZER
16 MEMOBJ_SBACTIVATIONMANAGER MEMORYCLERK_SQLSERVICEBROKER
16 MEMOBJ_AUDIT_EVENT_BUFFER OBJECTSTORE_SECAUDIT_EVENT_BUFFER
16 MEMOBJ_HASHGENERAL MEMORYCLERK_SQLQUERYEXEC
16 MEMOBJ_SBTIMEREVENTCACHE MEMORYCLERK_SQLSERVICEBROKER
16 MEMOBJ_ASYNCHSTATS MEMORYCLERK_SQLGENERAL
16 MEMOBJ_BADPAGELIST MEMORYCLERK_SQLUTILITIES
16 MEMOBJ_QSCANSORTNEW MEMORYCLERK_SQLQUERYEXEC
16 MEMOBJ_SCTCLEANUP MEMORYCLERK_SQLGENERAL
16 MEMOBJ_XP MEMORYCLERK_SQLXP
8 MEMOBJ_SECURITY MEMORYCLERK_SQLGENERAL
8 MEMOBJ_CACHESTOREBROKERRSB CACHESTORE_BROKERRSB
8 MEMOBJ_EXCHANGEXID MEMORYCLERK_SQLGENERAL
8 MEMOBJ_CACHESTOREVENT CACHESTORE_EVENTS
8 MEMOBJ_CACHESTOREXPROC CACHESTORE_XPROC
8 MEMOBJ_DBMIRRORING MEMORYCLERK_SQLUTILITIES
8 MEMOBJ_SERVICEBROKERTRANSOBJ CACHESTORE_BROKERTO
8 MEMOBJ_CACHESTOREOBJCP CACHESTORE_OBJCP
8 MEMOBJ_CACHESTOREXMLDBELEMENT CACHESTORE_XMLDBELEMENT
8 MEMOBJ_ENTITYVERSIONINFO MEMORYCLERK_SQLSTORENG
8 MEMOBJ_AUDIT_MGR MEMORYCLERK_SQLGENERAL
8 MEMOBJ_EXCHANGEPORTS MEMORYCLERK_SQLGENERAL
8 MEMOBJ_DEADLOCKXML MEMORYCLERK_SQLSTORENG
8 MEMOBJ_CACHESTORETEMPTABLE CACHESTORE_TEMPTABLES
8 MEMOBJ_HTTPSNICONTROLLER MEMORYCLERK_SQLHTTP
8 MEMOBJ_CACHESTOREVIEWDEFINITIONS CACHESTORE_VIEWDEFINITIONS
8 MEMOBJ_CACHESTOREPHDR CACHESTORE_PHDR
8 MEMOBJ_CACHESTOREXMLDBTYPE CACHESTORE_XMLDBTYPE
8 MEMOBJ_CACHESTORE_BROKERUSERCERTLOOKUP CACHESTORE_BROKERUSERCERTLOOKUP
8 MEMOBJ_EVENTSUBSYSTEM MEMORYCLERK_SQLGENERAL
8 MEMOBJ_CACHESTOREBROKERDSH CACHESTORE_BROKERDSH
8 MEMOBJ_SOSDEADLOCKMONITORXMLREPORT MEMORYCLERK_SQLSTORENG
8 MEMOBJ_CACHESTOREXMLDBATTRIBUTE CACHESTORE_XMLDBATTRIBUTE
8 MEMOBJ_CACHESTOREBROKERKEK CACHESTORE_BROKERKEK
8 MEMOBJ_QPMEMGRANTINFO MEMORYCLERK_SQLQUERYEXEC
8 MEMOBJ_CACHESTOREQNOTIFMGR CACHESTORE_NOTIF
(101 row(s) affected)
David -
Their original SQL Server was 2008, with SP unknown, but installed on D: and C: drives. The power spike corrupted their O/S on the C:
drive and someone reinstalled both the O/S and the SQL Server, which is now SQL 2008, SP4. They have intact files for all system databases, both .mdb and .ldf. Is there some way they can reconnect with the user databases using the intact copies
of the previous system databases? I have heard that if the SQL Server is stopped, previous Master and Msdb .mdb and .ldf files moved into place and the server restarted, that any previous user database .mdb and .ldf files can be accessed by the SQL server.
Is this the case, or are there details missing?Hello! try this steps
1 Open your SQL Server Management Studio console. This application shortcut is available in the SQL Server directory in the Windows Start button.
2 Enter the system administrator user name and password. SQL Server's administrator user name is "sa." This account is required for privileges to restore the database. If your restoring on a host provider server, use the administrator user name
and password they supplied for your account.
3 Right-click your database name and select "Attach." In the new window that opens, click the "Add" button to open a dialog box.
4 Select your MDF file and press the "Ok" button. It may take several minutes to restore the database if it is a large file. Once the process is finished, browse your tables to verify the data. The database is now restored.
If nothing helped try to use:
https://www.youtube.com/watch?v=1cbOYdvBW2c -
How to Re org the SQL 2008 database to have equal size data files
Hello everyone -
I have I/O issue with our production system (SAP ECC 6.0 on Windows 2008 and MSSQL 2008).
Following are my I/0 stats in DB02 (since DB Start)
ECPDATA1 E: Data 25.779 28.053 4.689 1,056.68 36.297 23.326 2.515 45.301 14.43
ECPDATA2 E: Data 23.143 24.979 4.68 593.297 17.971 12.448 1.238 47.663 14.518
ECPDATA3 G: Data 9.17 9.807 3.477 1,018.69 36.144 21.938 2.457 46.434 14.712
ECPDATA4 F: Data 10.985 11.788 2.69 148.512 4.777 3.248 0.314 45.722 15.201
ECPDATA5 F: Data 14.746 16.164 2.676 162.39 6.693 3.679 0.432 44.139 15.491
ECPLOG1 D: Log 5.337 27.081 4.916 26.962 26.264 0.037 1.919 726.928 13.688
ECPLOG2 F: Log 0.755 17.582 0.487 35.472 35.161 0.042 2.637 845.998 13.334
The fourth column is ms/op which is very high and also asymmetrical for all the data files.
Also, The data files are not of equal size
ECPDATA1 106,173
ECPDATA2 59,588
ECPDATA3 105,036
ECPDATA4 14,992
ECPDATA5 16,491
ECPLOG1 1,025
ECPLOG2 3,199
So ECPdata1 and ECPdata3 are about 105 GB while #4 and #5 are 14 GB and 16 GB each. As per SQL best practices, all the Data files should be of equal size to get the best performance.
How do I make the data files with equal sizes ?
Your help is very much appreciated.
Thank you
-TSBHi dudes!
The key here is that you manually grow your datafiles before the autogrown mechanism comes to play; in fact, SAP recommends setting the autogrow just to avoid the hypothetical case that should never arrive in which the DB administrator forgot about the database size and it ran out of space.
Otherwise, if you properly monitor and manage your DB you should always grant that at least 30% (to say) of free space is allocated in your datafiles. If you do so, the SQL Server engine should do the rest, as it follows a proportional filling strategy as you can read in SAP note 1238993.
In case your database is not still proportional, my advise is that you just manually grow the datafiles so that all them are the same size, and so SQL Server will do the rest. If you however need to addresss that immediately, you will need to reorganize your database, which is not just more sensitive and complicate, but also which involves some I/O intensive operations (check SAP note 159316).
Cheers!!
--Jesú -
Migration SAP SolMan 7.1 MSSQL 2008 R2 Enterprise Edition to MSSQL Standard Edition
Hello,
I try to migrate a SAP SolMan 7.1 on Windows MSSQL 2008 R2 ENTERPRISE EDITION to
MSSQL 2008 R2 STANDARD EDITION.
In the source system (MSSQL 2008 R2 ENTERPRISE EDITION) there is "table compression" and
"partitioning" active.
the MSSQL STANDARD EDITION doesn`t support these two features.
So a normal DB backup on the source system and restore in the destination system is not possible.
But the tables compression I can deactivte by the SQL script
SELECT DISTINCT ‘ALTER TABLE [' + SCHEMA_NAME(schema_id) + '].[' + NAME + '] REBUILD PARTITION = ALL WITH (DATA_COMPRESSION = NONE);’
FROM sys.partitions p
join sys.objects o
on p.object_id = o.object_id
WHERE o.TYPE = ‘u’
and data_compression_desc != ‘NONE’
UNION
SELECT ‘ALTER INDEX ALL ON [' + SCHEMA_NAME(schema_id) + '].[' + NAME + '] REBUILD PARTITION = ALL WITH (DATA_COMPRESSION = NONE);’
FROM sys.partitions p
join sys.objects o
on p.object_id = o.object_id
WHERE o.TYPE = ‘u’
and data_compression_desc != ‘NONE’
is there a way to undo or deactivate the the SQL table partitioning without any data lost ?
Or is there a other way to migrate a SAP SolMan 7.1 form MSSQL 2008 R2 ENTERPRISE EDITION to MSSQL 2008 R2 STANDARD EDITION ?
Best regards
A. MooreHi Moore
Could you refer the SAP Note for MS Sql Version supports
1076022 - Release planning for Microsoft SQL Server 2008 (R2)
and MS SQL table compression & decompression SAP Note
1488135 - Database compression for SQL Server
BR
SS -
Create Master Repository With MSSQL 2005
Hi,
I try to create a new Master repository with MSSQL 2005 but the connection to the database doesn't work.
I create a database named db_snpm for the master database and a database named db_snpw for the work db as oracledi_setup.pdf said.
I create a user/password snpm/password for db_snpm and snpw/password for db_snpw.
There are db_owner.
My driver connection : com.microsoft.sqlserver.jdbc.SQLServerDriver
My Url : jdbc:sqlserver://localhost:1433;selectMethod=cursor;databaseName=db_snpm;integratedSecurity=false
User : snpm
Password : password
When I try the connection, I've got the following error "com.sunopsis.sql.c: com/microsoft/sqlserver/jdbc/SQLServerDriver "
I had created a SQL SERVER DataServer in the topology Manager with the same driver and url and the connection work fine. I used it in some interface.
Any help would be great.
Thanks
Jerome
Edited by: user12010673 on 14 oct. 2009 02:00Creation of ODI master repository is limited to few relational databases only. Check certification matrix for ODI 11g
Oracle 10.2.0.4+
Oracle 11.1.0.7+
Oracle 11.2.0.1+
Microsoft SQL Server 2005
Microsoft SQL Server 2008
IBM DB2/UDB 9.7 and later FixPaks
IBM DB2/400 (V5R4+)
Hypersonic SQL 1.7.3+
Sybase AS Enterprise 15.0.x
thanks -
Upgrading R / 3 4.7 system to ECC6.0 with EHP4 along with windows 2008
Hi All,
I am looking for your feedback about the plan for upgrading our Landscape to ECC 6. with EHP4 from R/34.7E.
Current Environment: R/3 4.7X110 with SQL 2000 in 32 bit windows 2003
Planning to upgrade to the level of : ECC6.0 with EHP4 64 bit windows 2008, SQL 2005 Database
Based on the previous experience in upgrade I have planned in the following ways.
Since my basis component is in the level of 63, its possible for me to restore the SQL 2000 database in SQL 2005 (Using System copy tool )
Step 1: Migration of OS / DB using system copy tool (R/3 4.7 with SQL 2005 in 64 bit Windows 2003 ), Then will leave the system for testing for some period and after the confirmation, planned to start the upgrade
Step 2: By meeting all the prerequisites, Planned to upgrade to ECC6.0 with EHP4 on the OS / DB upgraded system.
Step 3: Once the upgrade completed / With the confirmation from the functional and technical consultants, I planned to upgrade the windows 2003 to windows 2008 using system copy tool.
Note: I am not using SQL 2008 - Project decision.
The above mentioned plan is the only way(proper way) for doing such activities or is there any other way to shorten the project.
I should not ask the below question (Even after reading PAM and SAP note 1054740), But kindly regret me for asking this one, out of own curiosity, i am asking the below one.
1. Is there any possible to install SAP R / 3 4.7 in windows 2008 with 2005 (This will help me to shorten the project). I am completely aware that SAP wont support R/3 4.7 with windows 2008, if its not at all possible is there any other work around for me to shorten? Let me know your suggestions and thoughts
Your valuable inputs will help me to proceed further with the plans (I surfed the SDN and read master guides already) . I really want to make sure , the way which i am going is the right one.
Thanks and Regards
Vijay KumarHi Jitendra,
Hope you should check the PAM again , Its supported for sure and also for upgrading to EHP4 - SQL 2005 is the Prerequiste.
Hi Abhi and Others,
Thanks for all your support.
I have successfully completed the project for my landscape and it was a great success too.
As you all said, since I had the hardware availability and time frame as well. Hence, I have tried both the possibilities.
Note :I would prefer and stick with the SAP proposed and supported way and even for my project I have followed the same. So I would recommend to stick with SAP supported one.
But for the own technical interest I have tried the other option as well which is not supported by SAP and also faced some typical issues as well / but solved on my own with some tricks and other activities. So, this option is also possible but highly risked one and of course(more importantly) which is not supported by SAP. So, i would recommend to go with the SAP recommended way.
Thanks for everyone and I am closing the thread
Regards
Vijay -
How to restore SQL Server 2008 database to SQL Server Express 2012
How to restore SQL Server 2008 database to SQL Server Express 2012.
I BACKED UP a SQL Server 2008 database from work, which runs the enterprise version of 2008, and I tried to RESTORE it to my new 64-Bit home PC which is running the new SQL Server Express 2012 64-Bit (Advanced Edition).
But if fails. I get the following message text.
Can anyone help me please. I thought restoring a 2008 database to the later version 2012 would be possible.
Here is the error message. Thanks.
TITLE: Microsoft SQL Server Management Studio
Restore of database failed. (Microsoft.SqlServer.Management.RelationalEngineTasks)
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The database was backed up on a server running version 8.00.2039. That version is incompatible with this server, which is running version 11.00.3128. Either restore the database on a server that supports the backup, or use a
backup that is compatible with this server. (Microsoft.SqlServer.SmoExtended)ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The database was backed up on a server running version 8.00.2039. That version is incompatible with this server, which is running version 11.00.3128. Either restore the database on a server that supports the
backup, or use a backup that is compatible with this server. (Microsoft.SqlServer.SmoExtended)
Are you sure your database is SQL server 2008 from error message it seems your SQL server version is 2000.I guess you have multiple versions of SQL server.
AFAIK you cannot restore backup of SQL server 2000 to 2012 directly .Restore it first to SQL 2008/2008R2 or 2005 then take backup again of new database created and then you would be able to restore it on 2012.Its kind of intermediate way
Also make sure your DB size is less than 10 G as max DB size supported by Express edition is 10 G and if your DB size is more than 10 G restore will fail.
You are also trying to restore enterprise DB backup on express edition so you will loose enterprise features on express edition
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
[solved] Build of php package with mssql support - checking my process
Since the straight 'php' package doesn't support mssql, I'm in the process of trying to build and install an updated copy that has that switch turned on. The information I've seen out there seems pretty straight forward, but my results are odd, so I'm checking my work here...
I did an abs to pull down the tree (had to use abs -t), created an abs directory under my root home dir, then copied the extra/php branch to /root/abs/php
Edit the PKGBUILD adding the line
--with-mssql \
to the end (line 130) of the list of phpextensions= that is later used in the ./configure line of PKGBUILD. Then from the same directory, run makepkg --asroot -f
then remove the old php with pacman -Rd php
then install the new php with pacman -U ./php-5.3.2-6-i686.pkg.tar.xz
Then modify my php.ini for mssql support
and then get the wierd results:
- php reports it does not have mssql support. phpinfo() shows the ./configure command line and the --with-mssql piece is not there.
- a php -m reports "PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mssql.so' - /usr/lib/php/modules/mssql.so: cannot open shared object file: No such file or directory in Unknown on line 0
A search for mssql.so comes up empty on the system. I am not sure why it isn't there, but I wanted to make sure I was doing the above steps first before running down the php code specific rabbit hole trying to find mssql.so in case it is under a different name in the source and then compiled out to be mssql.so in the end result.
(note - I have freetds on the system along with it's source files from the package, and no mssql.so in there either)
Thanks,
-Jeff
Last edited by jethro (2010-09-22 19:33:55)Did all that, no real errors, only a few warnings, but did figure out what was going on and will put it here in case anyone searches on this and is in the same boat. In search of mssql.so I found this web page http://howtogetitworking.com/2008/02/26 … p-on-unix/ which talks about needing to build the mssql.so file yourself. Specifically, going into src//ext/mssql/ then
# cd /uploaded_path/mssql/
# phpize
# ./configure
# make
# make install
and suddenly I have mssql.so, restart apache and I have mssql support. I wasn't expecting to have to compile a subsection of php after doing a package build with the switches I wanted, but I guess that's what I had to do.
Thanks,
-Jeff
Maybe you are looking for
-
Ipod shuffle Wont play.. Seems like a battery issue
Guys ... can anyone help with this My shuffle just stopped playing. Looks like the battery is dead. The lead indicator has no light when depressed. i have charged it via USB port and alos power adapter. The front status light shows green [ having bee
-
The finder used to make difference between Illustrator ans Photoshop .eps files except sometomes when these files came from a Windows PC, but now it doesn't work anymore and all .eps files are considereds as Photoshop .eps files. How can I revert to
-
HT204053 How do I join two Apple ID purchases into One?
How do I join two Apple ID purchases into One?
-
How can i clean up my mac book pro easily
tell me an easy way to clean up my mac book pro
-
Problem Installing JWSDP 1.6 on OS X Tiger
Hello again, I downloaded the JWSDP (Java Web Services Developer Pack) 1.6 from Sun and ran the Unix shell script file... The InstallShield Wizard launched and when the screen for "Select a Web Container" appeared, I copied and pasted this particular