ARIS - SAP BPM Integration
Hi Experts,
I am new to SAP BPM and ARIS, and was wondering if anyone can help answer this.
If processes are designed using ARIS, how would you import them in NWDS (BPM Process)? Is this the right way to do it? What is the best practice regarding this?
I know there is integration between ARIS and SolMan, but this is with SAP BPM. Any help would be appreciated.
Thanks,
Rahim.
From the wiki posted by Ann Rosenberg
Link: [http://wiki.sdn.sap.com/wiki/display/ModHandbook/ProcessModelingNotations]
It seems there is no way to import BPMN diagram from ARIS to NW BPM. One will have to redraw the models.
Rahim.
Similar Messages
-
BPM Integration Process that correlates 2 messages.
I have an BPM Integration Process defined that collects Deliveries for an Order number and when an Invoice arrives for the same Order number it merges the messages to produce another file that is for a 3rd party.
I correctly receive in the Delivery and the Invoice u2013 I can see them in SXMB_MONI with a checkered flag and they are directed to my BPM. I can see this also in SXMB_MONI_BPE. I can also see the correlation correctly found in both messages. No error is reported by either SXBM.. transaction.
However it does nothing except receive the files u2013 I am expecting a transformation and then the send step to execute.
Start > CollectIDOCBlock > Collect Fork
Fork1
Infinite Loop for Receive Delivery (Start process) and Collect in Container. It uses and activates Correlation OrderNum
Fork2
Receive Invoice uses Correlation OrderNum (it does not activate the correlation)
At the end of the Fork (when Delivery collected and an Invoice is received)
It will then do the Transformation and Send Step.
<End
I have tried various combinations of the correlations and which receive step starts the process. Any ideas ?Yes that did work. Now does somebody know what exactly the FORK parameter number of branches does ?
The SAPHelp is here
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
+You can specify the required number of branches and then define whether the process must run through all branches, or just a particular number of branches+
But it does not explain why you need to have 1 as necessary branches rather than 2. There are 2 branches in the FORK - so why does having 1 as the parameter work and not 2.
In this SAPHelp for Message-Dependent Loop
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
it indicates to me that the parameter should be 2.
BUT the SAP pattern (BpmPatternCollectMessage) I have used as a base for mine has this as 1 and not 2.
Why is 1 the correct value and not 2 ?? -
Hi All,
I am looking for a blog for complete scenario which includes business rules used in BPM,that is ,complete STEP BY STEP blog for BPM integration with BRM.Searched a lot but finding either BPM or BRM or BRM already created without mentioning steps and imported in BPM process.
Can you help me with a complete blog for BPM integration with BRM STEP BY STEP blog?
Thanks in advanceHi,
Please check if the below articles are useful
http://scn.sap.com/thread/3446620
http://scn.sap.com/docs/DOC-47066
http://scn.sap.com/docs/DOC-4588
Regards,
Sriram -
BPM integration with BRM step by step
Hi All,
I am looking for a blog for complete scenario which includes business rules used in BPM,that is ,complete STEP BY STEP blog for BPM integration with BRM.Searched a lot but finding either BPM or BRM or BRM already created without mentioning steps and imported in BPM process.
Can you help me with a complete blog for BPM integration with BRM STEP BY STEP blog?
Thanks in advanceHi,
Please check if the below articles are useful
http://scn.sap.com/thread/3446620
http://scn.sap.com/docs/DOC-47066
http://scn.sap.com/docs/DOC-4588
Regards,
Sriram -
Integrate UIBB in SAP BPM Process
Hi there,
i'd like to integrate a Form UIBB into a SAP BPM Process.
I created already a WD-Chip for the UIBB as described in: Creating a CHIP for a Single UIBB
For the usage of the chip in BPM i need to create at least one inport ("WD ABAP Chip X-SAP-WDY-CHIP/Z_MYCHIP is not supported because it must have exactly one inport (list of inports: [])"). At the Inport Tab in the created WD-Chip i can only select Inport "Resume".
As mentioned in FPM Chip Integration i implemented then the interface "IF_FPM_CHIP_FEEDER" in my feeder class of the Form-UIBB. I read that i have to implement method "IF_FPM_CHIP_FEEDER~CHIP_INIT" and add the inports dynamically.
But my problems are: -1) The method never gets called?
-2) BPM shows that i have to create at least one inport?
Is it correct, that the integration of FPM Screens into BPM is currently not supported, as mentioned in: WD-FPM integration with BPM : View Idea?
Do i have to create separate WDA(non FPM)-Screens to get it into BPM?
Hope you can help me out.
Thanks and Best Regards,
MichaelHi there,
i'd like to integrate a Form UIBB into a SAP BPM Process.
I created already a WD-Chip for the UIBB as described in: Creating a CHIP for a Single UIBB
For the usage of the chip in BPM i need to create at least one inport ("WD ABAP Chip X-SAP-WDY-CHIP/Z_MYCHIP is not supported because it must have exactly one inport (list of inports: [])"). At the Inport Tab in the created WD-Chip i can only select Inport "Resume".
As mentioned in FPM Chip Integration i implemented then the interface "IF_FPM_CHIP_FEEDER" in my feeder class of the Form-UIBB. I read that i have to implement method "IF_FPM_CHIP_FEEDER~CHIP_INIT" and add the inports dynamically.
But my problems are: -1) The method never gets called?
-2) BPM shows that i have to create at least one inport?
Is it correct, that the integration of FPM Screens into BPM is currently not supported, as mentioned in: WD-FPM integration with BPM : View Idea?
Do i have to create separate WDA(non FPM)-Screens to get it into BPM?
Hope you can help me out.
Thanks and Best Regards,
Michael -
Exception in SAP Application Integrator occured: Unable to process templat
Hi,
We are trying to execute a BI report in portal through BEx web and we are getting the below error
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to process template '<System.Access.WAS.protocol>://<System.Access.WAS.hostname><BWLauncherComponent[PORTAL_URL]>;jsessionid=<Request.JSessionID>?sap-ext-sid=<ESID[url_ENCODE]>&Language=<Request.Language>&theme=<LAF.Theme[url_ENCODE]>&sap-lafversions=<LAF.AllVersions[url_ENCODE]>&<Authentication>&<Report>&<BusinessParameters>', because 'Report' is an invalid terminal property of the Root context.
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:123)
at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
I have tested the connection in the system and also checked the webas name and host details in the system. they look fine.
please help me with your inputs.
Thanks.
Kind Regards,
Priyanka.This could be the problem . In your portal , copy the pcd path of a folder under which you would like to place this report and paste it in the bex analyser while publishing (pcd link) , see if this helps . A few more points .
1) You can also publish these queries as reports in portal using Bex Query designer - there will be an option to publish in portal . You will see it depending upon the version of designer. If you are able to see that option , selecting the pcd location would require you to have content admin role in portal .
2) Manually create iviews in portal (BI Reports) using the query string given to you by your BI folks . You can create either Bex 3.X or 7.0 depending upon the query string .
Regards
Mayank -
Question on BPM Integration Process
Hello Experts,
I am following this BPM article which is very similar to what I want to do.
We are using PI 7.1 without EP1.
I have an XML to IDoc scenario where my XML's external definition resides in a seperate SCV (SCV1) and my imported IDoc resides in a seperate SCV (SCV2). We did this to follow the Sender-Mapper-Receiver model. We have a different SCV for Mapping which holds MM and OM (SCV3). Now, I have my Abstract Service Interfaces for external definition in SCV1 and abstract interface for IDoc in SCV2. And, Integration Process in SCV1 (no good reason). But, now I am not able to access SCV2 abstract interfaces (IDoc abs) in my Integration Process since it sits in SCV1. I am thinking if I have to crate my external definitions, idoc, abstract service interfaces, MM, OM and Ingtration Process in one SCV instead of having them in three different SCVs. I was trying to follow sender-mapper-reciever model but seems like for BPM you need to have all your stuff in one SCV. Please help if you know how to resolve this issue wiithout getting rid of sender-mapper-receiver concept.
Thank you in advance for your help.
- MayurThanks Jose. I think creating dependencies is a away to go. I also found this this where Stefan suggested same thing.
So, now Sender (SCV1) and Receiver (SCV3) have been added under Mapper (SCV2)'s dependencies list and I will have my BPM Integration Process in the SCV2 which will give me access to both sender and receiver abstract service interfaces.
Re: Software Component Dependencies PI 7.1
Thanks,
Mayur -
Rfc Jco communication channel error in BPM integration process
Hi,
when we are processing the records some records are processed succussfully some records does not in integration process view. when we restart the workflow we can able to process the error messages succussfully.
but here not understanding how to reprocesse automatically error messages in the BPM integration process level.
thanks and regads,
krushi.Hi
re-submission of messages after corrections that were failed
Reconciliation of Messages in BPM
Reconciliation of Messages in BPM Contd. - Restart Workflow -
How to use objects from other SWCs in my BPM Integration Scenario
Dear all,
I am experiencing some difficulties with the following. I have created a BPM Integration Scenario in a SWC. It contains a tranformation step in which a message from that SWC is split and mapped to two IDOCs. These IDOCs are imported in anothern SWC which I use for common objects. I have created Abstract Message Interfaces based on these IDOCs in this "COMMON" SWC, but the probIem is that I cannot use them in my scenario in the other SWC. Even though I have a usage dependency (Installation Time) created to the "COMMON" SWC.
Any suggestions would be much appreciated!!
Thanks in advance.
Will happily provide points for good answers.
AukeThus, I would have to copy/import all objects to the same SWC?
Or create a separate SWC for BPM Integration scenarios?
I have tried to create the Abstract Message Interface in the SWC and reference it to the IDOC structure in the "COMMON" SWC. This results in a reference to an invalid object during activation. Even though the defined usage dependency.
What's the standard solution?
Cheers,
Auke
Message was edited by:
A. Schotanus -
In SAP BPM, can we priotirize the process at runtime to hold one process and allow my critical process to run first and the other next.
Thanks
Prabhakar
Edited by: VenkataPrabhakar Teegavarapu on Jul 19, 2011 12:09 PMHere is the API link:
http://help.sap.com/saphelp_nw73/helpdata/en/24/6a325944854629adcfd73c2cc0fa60/frameset.htm
But we can only read the current priority using the API, we cannot change the priority.
TaskInstanceManager taskInstanceManager = BPMFactory.getTaskInstanceManager();
Set<TaskAbstract> myTasks = taskInstanceManager.getMyTaskAbstracts(statuses);
Priority taskPrio = myTasks.getPriority()
Thanks
Abhilash
Edited by: Abhilash Gampa on Aug 2, 2011 10:52 AM -
Notes and Attachment in SAP BPM
Hi,
In SAP BPM, the users that are completing a task can add some notes or attachment. These items will be visible by the other users who will execute the next tasks. However, when the process is complete, I'm not able via the SAP NWA to retrieve the attachment or view the notes that have been inputted during the execution of the process.
Does somebody know how to view this information once the process is completed?
Thanks
MartinHi Martin,
You might have some access issues.
In a nutshell:
Prerequisites
You have administrator rights for the portal content, that is, the content administrator portal role is assigned to you.
Procedure
1. Log in your portal as a content administrator.
2. Choose the Content Administration tab page.
The portal content catalogue is displayed.
3. In the portal content catalogue, choose Portal Content ® Content Provided by SAP ® End User Content ® Standard Portal Users ® Pages ® Universal Worklist ® Universal Worklist.
Alternatively you can search for pcd:portal_content/com.sap.pct/every_user/general/pages/com.sap.km.pages/com.sap.netweaver.bc.uwl.uwl_page.
4. In the context menu of Process List Viewer, choose Open ® Related Links.
5. In the portal content catalogue, choose Portal Content ® Content Provided by SAP ® End User Content ® BPEM ® Pages ® Process List Viewer.
Alternatively, you can search for pcd:portal_content/com.sap.pct/every_user/com.sap.bpem/com.sap.bpem.pages/com.sap.bpem.ProcessListViewer.
6. In the context menu of Process List Viewer, choose Open ® Related Links.
7. Confirm the Add Related Link dialog box with OK.
8. Save your settings.
Next time when you open your universal worklist (Home ® Work), in the left hand panel under Related Links the Process List Viewer is displayed.
Hope this helps,
David -
Hello All,
We need to integrate SAP with Autocad. But don't have clear idea in configuration part.
For that we are using following interfaces:
SAP GUI 7.20
Autocad 2010
Cideon 6.0 ( Middle ware sw from SAP acts like interface between SAP and Autocad)
Can anyone please help me configuring SAP CAD Integration.
Thanks in advance
Uday.Hi Uday,
You have posted this message in the CRM Mobile Sales section.
Provide me more details of your system so I can redirect you to the proper forum.
Thanks,
Gervase -
SAP Portal Integration with InfoView
Hi Experts,
I have successfully configured SAP Portal Integration with InfoView using the following steps provided by Ingo:
- set the system that you want to be authenticated against as the DEFAULT system in the options of the SAP authentication.
- go to the webapps folder of your app server and navigate to the InfOView folder
For the Java version of InfoView (Windows environment) you need to edit the file web.xml, which is located (assuming Tomcat as application server) in the directory \Program Files\Business Objects\Tomcat55\webapps\InfoViewApp\WEB-INF for the actual deployment.
In addition you can make the change to the file in the folder <INSTALLDIR>\BusinessObjects Enterprise12.0\warfiles\WebApps\InfoViewApp\WEB-INF. The files in the second locations are being used when you redeploy the web applications with a tool like wdeploy. You need to change the following values
authentication.default = secSAPR3
siteminder.enabled = False
sso.enabled = True
Then I have created URLiView to InfoView login page, when the user click on the link, BOBJ will use the DEFAULT system to authenticate user.
However, there is a new requirement for users who exist in another SAP system to SSO into InfoView too. My question is whether we can specify in URLiView url or other configuration to select which SAP System to authenticate user on?
I would like to create Role A and Role B in Portal and each will display different URLiView that will authenticate user against different SAP System if possible.
Appreciate your advise.
Regards,
MedyHi Ingo,
Thank you for your reply.
We are trying to create an URLiView to the logon page of InfoView: http://<BOBJ Server>/InfoViewApp/logon.jsp that will bring the user to InfoView home if SSO passed instead of OpenDocument URL.
I have tried to add URL parameters to the URLiView (http://<BOBJ Server>//InfoViewApp/logon.jsp?SAP_SYSID=DCD&SAP_CLIENT=200), but InfoView is still using the default system in CMC to authenticate user.
Please advise.
Best Regards,
Medy
Edited by: Medy henry on Apr 29, 2010 4:00 AM -
Business Objects and SAP BI Integrated Planning
Hi,
Not too sure if this is in the correct forum...but I have question.
Is there a way to use the integrated planning functionality with a Business Objects Front end tool? As I understand BEx will at some stage will not be supported...so I guess there must be a tool. If so which one?
Thanks,
LeoHi Leo,
The Business Objects << SAP Solutions Integration Kit >> enables Web Intelligence, Yoyager, and Crystal reporting on the following SAP sources:
1. SAP BW (Infoset, BW Query, BW MDX and ODS)
2. SAP R3 / mySAP ERP (transparent tables, pool tables, cluster tables, views, ABAP functions and ABAP data clusters)
& Also web portal integration to:
3. SAP Enterprise Portal (SAP's Knowledge Management - Repository Framework Interface, iViews etc)
So.. if you can consolidate your planning data into a cube datatarget, you might be in with a chance!
I hope this helps.
Regards,
Henry -
Business Objects and SAP BI Integrated Planning material
hi
guys
i am looking for Business Objects and SAP BI Integrated Planning any material site plz send me
regards
sureshHi ,
Please find these blogs by Ingo. This should help you.
BusinessObjects and SAP - Installation and Configuration Part 1 of 4
Install Part #1
BusinessObjects and SAP - Installation and Configuration Part 2 of 4
Install Part #2
BusinessObjects and SAP - Installation and Configuration Part 3 of 4
Install Part #3
BusinessObjects and SAP - Installation and Configuration Part 4 of 4
Install Part #4
BusinessObjects and SAP - Configure SAP Authentication
SAP Authentication
BusinessObjects Integration with SAP NetWeaver BI - Technical Material
Thanks,
Gopi
Maybe you are looking for
-
I would just like to understand why there a two thin red vertical lines on the screen I suspect I need to bring into an apple store for diagnostics but is anyone aware of the likely cause? thanks v much!
-
Nls_lang for psp with Traditional Chinese
I have two Oracle environments: 1. Oracle 817 on Windows 2000 (eng) with Traditional Chinese as default locale, and 2. Oracle 816 on Solaris with Oracle 9iAS portal. in both environment, I wanted to create a simple page as follows: <html> <head> <tit
-
Search a Directory Tree For a Directory
Hello All, Alright, the backround first. I am working on a system for managing photos for cases. So, the top photos dir has 5 dirs represnting the years. In each of those, are months, in those are days, and in the days there are dir named for the cas
-
How do I get Elements 10 to operate from C: but store data on D:?
My new computer is equipped with an SSD for programs and a 1TB disk for data. How do I configure Elements so it can run from the SSD (C:) but store my picture data on the D: drive?
-
Drill down on Hierarchy with Text and Key
Hello Experts, I have created WebI report on top of Bex Query. I have hierarchy, by default report will show Level1 for hierarchy and then User can drill down to lower levels, but I want to show Key for that hierarchy as well next to hierarchy. For