Ark not working with rar files after unrar upgrade

Today after a #pacman -Syu the package unrar was upgraded from 4.2.4 to 5.0.2. After that, Ark cannot extract .rar archives. Did anyone else experience this problem?
Starting Ark from the command line doesn't show any error. I also tried installing libunrar (which was not needed before and also not installed as dependency) but it made no difference.
Using unrar from the command line works fine, though, so it's just Ark not being able to use it for some reason.

Bogart wrote:Sorry, maybe I should have specified that Ark is the archive extracting tool used by KDE. A graphical frontend for gzip, unrar, etc...
Ahh fair enough. I have no experience with KDE whatsoever, so I'll leave others to help you work through this problem Best of luck!
All the best,
-HG

Similar Messages

Has anyone not working with .dv files had synchronization problems?

Has anyone not working with .dv files had sound synchronization problems? I'm not exactly sure what the alternatives to DV are, but I think one of them is HD.
The reason for asking this question is to help isolate the nature and cause of a very serious flaw in iMovie '11. In the original release of iMovie '11 (version 9.0) there was a small--but serious--synchronization problem. In the 9.01 there is a large synchronization problem. We know of one person who has not experienced the problem, and he is not working with DV files (media). So we want to find out if anyone who is using something other than .dv files is experiencing a lack of synchronization between sound and picture. Knowing the answer to this will help with figuring out where the cause lies. For the initial iMovie '11 release (9.0), you probably would not notice a problem unless you had very long event-clips, e.g., two hours long. Events get this long if you are transferring from analog 8 mm tapes. Even then, it would have to be in scenes in which the connection between event and sound is obvious, e.g., close ups of people talking. It isn't until the 9.01 release that most people would notice anything. All we need to do is establish one case of a synchronization problem in which the person is using something other than DV.
Message was edited by: Paul Bullen

Hopefully, the 9.0.2 release will make my question moot. Zyfert must have posted the announcement of the release just as I was formulating my question. Still, if you have information on the subject, it would be interesting to hear.

Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows

Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows. Any fixes?

Same problem here...

Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

HT202157 My apple TV is not working with light flashing after up date

My apple TV is not working with the light flashing after an up date, what can be done?

same here macbok air 2012 appletv 3 bugs the **** out of me
it just stops randomly after a "while"

Validation Event Handler Not working with Flat File GTC Trusted Recon

We are created Event Handler for checking special characters in Telephone field.Its working fine when the user is created through Admin Console.but the event handler is not triggering while doing GTC Flat File Trusted recon.
Version: OIM 11.1.1.5.0
Can someone please help me out with this.
Thanks
Edited by: 790561 on 17-Feb-2013 09:01
Edited by: 790561 on Feb 17, 2013 9:35 PM
Edited by: 790561 on Feb 18, 2013 12:38 AM

Validation Event handlers will not work with your trusted recon. You can use the GTC Validation provider, it is nothing but the plugins which you can insert with in your source field in GTC. I think you can easily get the steps for how to create a custom GTC Providers.
Edited by: iam37 on Feb 16, 2013 4:09 PM

Import via Drag & Drop not working with LR CC (after Update from 5.7)

I always imported my pictures by just dragging them in the Windows Explorer and dropping them to the Lightroom Gallery tab.
This does not work with LR CC anymore.
The longer way via "Import" works fine.
Any suggestions?

With Gallery i meant Library, my mistake (wrong translation, i am using the german version).
What works with your setup doesn't work with mine.
I attached a screenshot:
As you can see (cursor) i can't import the file from the file explorer on the right.
(The file is not already in the catalogue and i am in the library tab grid view mode).
Using Windows 7 x64 prof Service Pack 1

Mouse not working with Boot Camp after 10.5.7 update

I upgraded to 10.5.7 recently, and now my mouse doesn't work on Boot Camp. It doesn't seem to register, and I can't move the pointer. I tried this with two mice that worked just fine on the Mac OSX side. Any ideas? Has anybody else noticed this?

I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

Airprint not working with HP printer after updating to IOS5

Hi,
I have an HP airprint printer (photosmart B210) that worked fine with my ipad2 and iphone 4 all running ios 4.
Now I have a iphone 4s as well as the iphone 4 and ipad. After upgrading to ios 5, I can no longer airprint from any of my ios devices.
I have tried turing everything off anf back on (including time capsule router, printer, ios devices).
I can see the printer from ios but the job just sits waiting to print. I have managed to print one document after trying multiple times.
Anyone having this issue?
Thanks

BattleAngelita,
Welcome to the HP Forum.
The fact that the SimplePass program is asking your for your Master Windows Password means the program survived the upgrade process to Windows 8.1 -- sort of.
You may want to start with the following:
Create a Restore Point >> Create a Restore Point – Win7 OR Create a restore point Win8
Close all your programs and Shut down the computer
Disconnect everything (little Unifier for the keyboard / external mouse can stay)
Perform the Hard Reset for your notebook
Boot the computer and log in
Check to see is SimplePass has sorted itself.
==========================================================================
You may want to try to Update your SimplePass program to the latest version in the version 6.x series.
Before you do that, read and follow the instructions to Export your Webcards to your .tsd file. Regardless of whether the website logins are working right now; you do need this backup in case you lose your HP SimplePass program (through complete removal / reinstallation or though corruption).
Next, consider updating the HP SimplePass program to the latest of the version 6 series. If you are already running the latest version, consider the other options in the guide, including the "Repair SimplePass" procedure.
Open the file > Click on Download > Click “Open in Adobe Reader”
Simple Instructions to Upgrade HP SimplePass
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

Imessage not working with Apple ID after Mountain Lion (neither on iPhone anymore)

Hi,
Ive been searching on the net for 2 days in a row hours and hours and decided to place the question here.
Since updating to Mountain Lion iMessage doesn't recognize my Apple ID anymore, it was working good on the beta.
When i try to login it says Apple ID and/or Password incorrect. It works fine on the store and iCloud.
I've tried changing the DNS to 8.8.8.8, did the keychain tricks with deleting the acounts and resetting, tried booting in Safe mode, tried killing the agent in activity monitor and tried deleting the all the iMessage/Agent/iChat files in the preferences directory. I also re installed the Mountain lion update, no go.
I tried everything on every topic i could find.
Also iMessage isnt working on my iPhone either anymore, it does send to my phone number but not to my Apple ID email anymore, when i try to login with apple id it says it cannot connect as well.
Since it isnt working on my iphone and my macbook, i reckon it has something to do with my Apple ID, but i find it weird that it just happened after the update. Ive been using this ID for 3.5 years withouth problems, it's also verifeid.
Anyone help?
Thanks in advance
Etienne.

HI,
It should read
Uploaded with Skitch!
10:07 PM Tuesday; October 9, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

IPhone 3G does not work with car integration after 2.2 update

I just upgraded my iPhone 3G with the new 2.2 software update and now it doesn't work with my car integration. Very frustrating... I have a 2009 Honda Civic that has a USB interface. Before the update I was able to charge and play music through the USB interface. In addition, I could also control the music through the stereo. After the update, it says not compatible and it doesn't even charge the phone anymore. Doesn't anyone have the same problem or know how to fix it? Street view is cool but i will definitely revert back to 2.1 if I can't fix this...

I am having the same problem here After updating to 2.2 the iPhone has stopped working in the car. The stereo just simply refuses to see it. The car in question is a brand new 2009 VW Polo Match, which I know is not as fault as tried it with a iPod nano and worked fine.
Is reinstalling the firmware only solution to this? Do we know the cause yet?

Full-Text search is not working with PDF files - SQL Server 2012 64 bit

Hi,
We are in the process of storing PDF files in SQL Server 2012 with Full-Text search capability.
I followed the steps as below and it works fine with word document but not for PDF files. I tried with PDF ifiler 11 & 9 and both are unsuccessful.
Server/DB Level Settings:
1)
Enable FileStream
2)
Install Full-Text
then restart
3)
Use [specific db]
alter
database [db name]
add
filegroup Files
contains filestream;
alter
database [db name]
add
file (
name = N'Files',
filename =
N'D:\SQL\DATA') to
filegroup [Files];
3)
Database level
Settings:
FileStream:
FileStream
Directory name:
[Set the name]
FileStream
non-transacted
Access: [set Appropriate]
3a)
Add a
datafile to DB
with filestreamdata
filetype.
4)
Share D:\SQL\DATA
directory and
add specific accounts
with read/write
access
5)
Give bulkadmin
access to those
specific accounts
at server
level
6)
From the
page (link)
download and
install the *.pdf
IFilter for
FTS. Link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5542
7)
To the
PATH global system
variable add
path to the
catalog,
where you installed
the plugin.
Default for
this version is:
C:\Program
Files\Adobe\Adobe
PDF iFilter 9
for 64-bit
platforms\bin
8)
From the
page (link)
download a
FilterPackx64.exe
and install
it. Link:
http://www.microsoft.com/en-us/download/confirmation.aspx?id=20109
9)
Now from
SSMS execute the following
procedures:
-sp_fulltext_service
'load_os_resources',1
-sp_fulltext_service
'verify_signature', 0
EXEC
sp_fulltext_service
'update_languages';
-- update language list
EXEC
sp_fulltext_service
'restart_all_fdhosts';
-- restart daemon
reconfigure
with override;
10)
Restart the
server
11)
select document_type,
path from
sys.fulltext_document_types
where document_type
= '.pdf'
-select
document_type,
path from sys.fulltext_document_types
where document_type
= '.docx'
12) Results are OK.
Following is my Table /Index/ catalog script:
CREATE
TABLE dbo.DocumentFilesTest
DocumentId INT
IDENTITY(1,1)
NOT NULL
PRIMARY KEY,
AddDate datetime
NOT NULL,
Name nvarchar(50)
NOT NULL,
Extension nvarchar(10)
NOT NULL,
Description nvarchar(1000)
NULL,
FileStream_Id UNIQUEIDENTIFIER
ROWGUIDCOL NOT
NULL UNIQUE DEFAULT
NEWSEQUENTIALID(),
FileSource varbinary(MAX)
FILESTREAM DEFAULT(0x)
go
--Add default add date for document
ALTER
TABLE dbo.DocumentFilesTest
ADD CONSTRAINT
DF_DocumentFilesTest_AddDate
DEFAULT sysdatetime()
FOR AddDate
EXEC
sp_fulltext_database
'enable'
GO
IF
NOT EXISTS
(SELECT
TOP 1 1 FROM sys.fulltext_catalogs
WHERE name
= 'Ducuments_Catalog_test')
BEGIN
EXEC sp_fulltext_catalog
'Ducuments_Catalog_test',
'create',
'D:\SQL\PDFBlob';
END
--EXEC sp_fulltext_catalog 'Ducuments_Catalog_test', 'drop'
DECLARE
@indexName nvarchar(255)
= (SELECT
Top 1 i.Name
from sys.indexes
i
Join sys.tables
t on
i.object_id
= t.object_id
WHERE t.Name
= 'DocumentFilesTest'
AND i.type_desc
= 'CLUSTERED')
PRINT @indexName
EXEC
sp_fulltext_table
'DocumentFilesTest',
'create',
'Ducuments_Catalog_test',
@indexName
EXEC
sp_fulltext_column
'DocumentFilesTest',
'FileSource',
'add', 0,
'Extension'
EXEC
sp_fulltext_table
'DocumentFilesTest',
'activate'
EXEC
sp_fulltext_catalog
'Ducuments_Catalog_test',
'start_full'
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
ENABLE
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
SET CHANGE_TRACKING
= AUTO
ALTER
FULLTEXT CATALOG
Ducuments_Catalog_test REBUILD
WITH ACCENT_SENSITIVITY=OFF;
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'pdf'
'BOL12006553.pdf'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\BOL12006553.pdf',
SINGLE_BLOB)
AS BLOB;
GO
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'docx'
'test.docx'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\test.docx',
SINGLE_BLOB)
AS Document;
GO
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'BILL')
Returns nothing. it should come from PDF file
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'TEST')
Returns from word document as follows:
2           2014-06-04 10:11:41.393            test.docx docx
NULL   [BINARY Value] [Binary Value]
Any help is appreciated. Its been a long wait.
Thanks,
Vel
Vel Thavasi

Hello,
Did you check the fulltext log files for more details about the errors. If the filter isn’t working, there should be errors in the error log file.
The following thread is about similar issue, please refer to:
http://social.msdn.microsoft.com/forums/sqlserver/en-US/69535dbc-c7ef-402d-a347-d3d3e4860d72/sql-server-2008-64bit-fulltext-indexing-pdf-not-working-cant-find-ifilter
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Screen sharing not working with eMac lab after 3.2 update

Screen sharing no longer functions after applying the 3.2 update in our eMac labs running 10.4.10 and PPC processors. However, it still functions in our iMac labs running 10.4.10 Intel processors. Before update, I was able to screen share with all the computers in the lab. After the update, I am only able to share with one single computer at a time. Not very useful anymore for teachers to use for demonstrating purposes at our school. It definately had something to do with the update since it was working moments before the update. Please help before I have to call Apple regarding this issue. Again, it only seems to affect screen sharing across PPC eMac computers, not Intel based computers.

Through much testing at our schools, we determined that the problem lies with the update and the admin machine running ARD. If the admin machine is less than a G5 (doesn't matter if it is intel or PPC), ARD will not screen share with multiple computers (more than 3 machines) at a time. If you have a G5 admin machine, you probably will not experience this problem. Apple has yet to contact our district regarding any options for fixing the problem. We are currently in the process of shuffling computers to make sure there is a G5 admin machine in every lab to run ARD. However, I still think Apple needs to recognize this as a problem with their update. Screen sharing is a great tool for teaching class and it is too bad that with the current 3.2 update, it breaks the ability to use it with "older" G4 macs. Hence, that is why your eMac screen sharing is not working anymore. I can only hope for a prompt update to ARD to remedy this situation.

DW9 (CS3) split view not work with ASP files?

I just installed and ran DW CS3 (ver 9.0 bulid 3481) -- I use
"coder" view for the screen layout. I like the split-view style
since I code inline HTML with my ASP and ASPX code. However, the
new version has the split-screen view button grayed out. How do I
enable split view when I edit files that are not just ending in
"htm" or "html" extensions? If the Adobe programmers made an
ASSumption then they need to issue a patch and remove it pronto. I
do not want someone else making decisions on how I do my work...I
get enough of that from Microsoft already, I do not need it from my
tools also. Please forward this to the developers if there is no
way to change my preferences, otherwise please tell me how to edit
a config file or hex-edit the executable to get this funtionality
back. TIA!

I still can't figure out why the split view or design view is
grayed out and not accessible when editing files with an .asp or
.aspx extension and it is driving me crazy! I called the support
line and got someone in India who didn't understand my problem. 30
minutes later I finally got her to agree to transfer me to
secondary support but they were busy and she promised me they would
call the next day. That was over a week ago. I didn't even get a
voicemail, even though I stayed by my phone the whole day. I see
that support for DW under Adobe is no better than it was under
Macromedia...how sad. Microsoft Expression Web is looking better
and better every day....... :(

Flash Preloader Not Working with Local Files?

Hello all,
I have created a digital resumé using a Flash
presentation. The presentation links to several SWF files that are
rather large. I have designed and implemented preloaders for the
files.
My intent is to burn the whole product to CD for
distribution. The problem I am having is that my Flash preloaders
work perfectly in FireFox; I click the button in the main
presentation and the preloader comes up in the target screen,
followed by the SWF.
However, the preloaders do not work at all in IE, which
leaves a black pane with nothing in it and causes the user to click
the button several times trying to figure out why nothing is
happening.
The Flash presentation that is being displayed is embedded in
a HTML document. The user clicks a button to load a SWF to a
separate screen; the preloader runs until the file is loaded.
Any help you could provide is appreciated.

I have attached the actionscript for the data connection. The
odd thing about this issue is some of the data is being displayed
from the webservice call and then some is not. The drop down list
is not being populated but I am getting some text in a textarea
that is on the form. My datasource is a SQL Server database and in
ColdFusion administrator, I used the actual machine name to point
to the datasource because it is directly linked to my web server.
This configuration is the one giving me problems. If I change the
datasource to my test SQL Server (server.somewhere.com) it works
fine. Does this help any?

Ark not working with rar files after unrar upgrade

Similar Messages

Maybe you are looking for