ArkVPN always fails to connect VPN

I have bought a subscribtion in ArkVPN. The transaction went well, so no payment problems can be.
However the program cannot connect to any server! When I look which server should I connect it sais 0ms to my location.
The developers website cannot be opened, may be it is blocked in China. I don't have any other VPN.
It would be nice if somebody could tell me how to solve a problem and connect to VPN using my ArkVPN program and my subscribtion in it.
or if somebody knows the developers email, that would be helpful too.
Help me please, I need a VPN, and I want to start getting advantage of my payment. By the way the program worked well for free before I the subscribtion.

If Oracle reports error about Net8 configuration, that means -
you're trying to use "thick" JDBC driver, though usual way
is to use "thin" driver instead. You have to make corrections
in your connect url like:
"jdbc:oracle:thin:@<host>:<port>:<sid>"
^^^^
look here-----|
Hope this will help
Paul

Similar Messages

BIPCatalogUtil extraction always fails with "Connection timed out"

BIPCatalogUtil extraction always fails with "Connection timed out".
Any suggestions on what could be the issue?

One thought was that perhaps it was timing out going out some unused port (e.g., the Airport port), but a list shows only the Ethernet port is enabled:
admin$ sudo networksetup -listallnetworkservices
An asterisk (*) denotes that a network service is disabled.
Built-in Ethernet
*AirPort
*Built-in FireWire
*Bluetooth

Sync always fails to connect to server with no reason

On two of my computers (both Macs running 10.6.7, one a MacBook Air and one an older iMac), Sync fails, saying "failed to connect to server"
When I try again (and again, and again...) it results in the same message. It has synced successfully in the past, but has not in more than a week.
I can't figure out how to get it to sync or even how to get more information about the issue.
Any help, ideas or suggestions - including questions clarifying or detailing the issue - are welcome.
Thank you!!

If Oracle reports error about Net8 configuration, that means -
you're trying to use "thick" JDBC driver, though usual way
is to use "thin" driver instead. You have to make corrections
in your connect url like:
"jdbc:oracle:thin:@<host>:<port>:<sid>"
^^^^
look here-----|
Hope this will help
Paul

Why always fails to connect to Oracle 8.1.5.0

I try to connect to database server yesterday, but Net8 easyconfig frequently give me the message:"...ORACLE not available, there may be an error in the fields entered,or the server may not be ready for a connection." while i am testing connection.
I am urgent to get a answer from an expert what's wrong with it, i think the configuring value is not wrong and easy. Actually i had succeed in connecting it before, but it failed again now.
I am really crazy to this problem.

If Oracle reports error about Net8 configuration, that means -
you're trying to use "thick" JDBC driver, though usual way
is to use "thin" driver instead. You have to make corrections
in your connect url like:
"jdbc:oracle:thin:@<host>:<port>:<sid>"
^^^^
look here-----|
Hope this will help
Paul

Apple TV fails to connect to WPA-protected wireless network

Tried different settings and it always fails to connect. It does display a code of -3 ... does anybody know what that code means?
If I disable WPA in my wireless router, and remove the WPA key configuration from my Apple TV, than the connection succeeds and I have done that for brief periods of time but cannot keep it that way.
Any insights?

BTW, my wireless router is configured for WPA Personal (no Radius), Pre-shared-key, TKIP (AES does not seem to be an option).

Im trying to install new version of itunes in my macbook but its always failed .i can download but cannot install says to contact with software manufacturer assistance....please solve my problem because of this i couldnt connect my iphone to my mac.....

im trying to install new version of itunes in my macbook but always failed.i can download it but failed to install and always says to contact with software manufacturer for assistance...please heblp me i couldn’t connect my iphone to iktunes..please coz in my mac their is old version of i tunes.....

Welcome to the Apple Support Communities
See if your computer is supported > http://support.apple.com/kb/sp575 Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, go to  > Software Update and update to the latest version.
If your computer is compatible, you can use Mountain Lion. Open App Store and purchase Mountain Lion. Check if your programs are supported > http://www.roaringapps.com

VPN fails to connect

Does anyone know if the VPN option works? It is under setting, wireless network, VPN settings. I have a PPTP connection that works fine from my desktop but "fails to connect to server" when tried on my phone.

Sorry to say that showing the scrreen shots does not make it work. The bottom line is the the ROM supplied by Verizon/Samsung/Google - whoever you want to blame does not support VPN connections.
Here is a log and one VPN vendors answer.
11-18 21:27:41.648 E/VpnService(7616)onError()
11-18 21:27:41.648 E/VpnService(7616)java.io.IOException: Connecting timed out
11-18 21:27:41.648 E/VpnService(7616)at com.android.server.vpn.VpnService.waitUntilConnectedOrTimedout(VpnService.java:206)
11-18 21:27:41.648 E/VpnService(7616)at com.android.server.vpn.VpnService.onConnect(VpnService.java:136)
11-18 21:27:41.648 E/VpnService(7616)at com.android.server.vpn.VpnServiceBinder$2.run(VpnServiceBinder.java:108)
11-18 21:27:41.648 E/VpnService(7616)at java.lang.Thread.run(Thread.java:1096)
11-18 21:27:41.728 I/VpnService(7616)disconnecting VPN...
11-18 21:27:41.793 D/VpnActor(7580)vpn disconnecting!
We think the reason behind this error is that, either your phone not support VPN or the ROM u r using have VPN problem.( from my own experience, I think it's the ROM problem)

HT6162 Hi guys, I downloaded this new iOS7.1 but it always fails to install. It says I am not connected to the Internet while I have all the network and second excuse it gives is that the software update is currently unavailable. Please help.

Hi guys, I downloaded this new iOS7.1 but it always fails to install. It says I am not connected to the Internet while I have all the network and second excuse it gives is that the software update is currently unavailable. Please help.

Hi Romantilizer,
Hook your phone up to iTunes on the computer you sync with and do your update from there. This is a robust iOS release, and doing it OTA is not always successful. I tried on my iPhone a couple of times, and it aborted the update twice. Did it via the Mac, and it was fine.
It takes a bit of time, so hook it up, make sure it is updating your phone, and then find something else to do for a couple of hours.
Cheers,
GB

HT201407 i cannot activate my iphone 3Gs i tried many times using wifi and connect. to itunes but activtion is always failed

Hi, i cannot activate my iphone 3Gs i tried many times using wifi and connect. to itunes but activtion is always failed. can you help me to fix this problem?

Do you have a SIM in the phone?
A SIM is required to activate it.
If you DO have a SIM in it, the most common cause of this problem is a phone that was hacked to illegally unlock it and has been updated or restored.

Anyconnect Failed to Connect using WEBVPN on IOS Router 2800 Series

Hi All,
Kindly need your help. I was trying to built Remote Access VPN connection on my lab environment. The component is Router 2811 with (c2800nm-advsecurityk9-mz.124-22.T5.bin), Anyconnect Client ( anyconnect-win-3.1.05160-k9.pkg ), Laptop ( Firewall and Antivirus disabled, already register webvpndomain.com into hosts file on Win32/Driver/Etc ).
I was able to connect using anyconnect if I'm initiate connection via web (https://webvpndomain.com) and start tunnel connection SVC. I'm also able to reach my LAN and I get my private IP Address assigned by my vpn pool on the router. The problem is when I'm initiate connection to vpn directly from the computer, I mean I'm not using web (https://webvpndomain.com) and I'm just press "connect" on my anyconnect software that already installed on my Laptop the connection always fail. I get error message : Connection attempt has failed
Here I'm also attach my router configuration, so you can see what I've done or what mistake that I've made on the configuration.
Is anybody in here have experience this problem on deploying Remote Access VPN using webvpn and anyconnect as vpn client ?
I'm really appreciate anybody that get into this discussion
Best Regards,
Nanda

Try using webvpndomain.com/myVPNGW as host

Fingerprint reader not working in IE and saying failed to connect to sensor

Hi all,
I bought a Qosmio x500 10t a couple of months back. For the first couple of weeks i had no probs using the fingerprint reader to log in to windows and to log in to websites in Internet exploer.
All of a sudden it would not work on any website stored. The green banner showed accross the top of site and asked to swipe finger but nothing happened when I swiped. I rebooted and it worked again but not for long before failing. This time a reboot didnt work so i deleted my finger prints and websites and started from scratch. That worked for a couple of attempts before probs started again. And on trying to get into Fingerprint utility it says failure to connect to sensor. So, I did a system restore. It worked for a couple of times again and then same probs. So I found the updated utility software, uninstalled the old and put on the new. Same again, worked for a couple of times then failed.
I could not find anything stuck in the registry but to be on the safe side i did a full system clean back to factory setup using backup discs. Hey presto i thought it had worked. Everything going ok for first 24hrs and then same problems start to occur. Only this time it is also prompting me to enroll fingerprints even though i already have. And when i try to get into the utilioty it says failed to read sensor again.
The fingerprint log on to windows always works as long as i dont close the fingerprint utility down before shutting down. If i do exit the utilty i cant reopen it as it just says failed to connect to sensor. And then i have to unistall and reinstall the utility software. Aty the moment it occasionally works on websites stored but most of the time it doesnt do anything.
Please help. Do I need to send laptop back to Toshiba??

Hi,
*I got a solution* for the problem that the fingerprint sensor "suddenly" does not work any more.
When starting the Toshiba Fingerprint Utility, it says "failed to connect to fingerprint sensor".
Is it possible that just before it stopped working there was a new firewall installed, or firewall settings had been changed?
*In my case, the problem was solved by changing my firewall settings* (Windows 7 Firewall Control) to ALLOW all traffic for
the Authentec Fingerprint Sensor Service (AFSS). It is the file "AtService.exe" in C:\Program files
The reason is simple:
The Toshiba Fingerprint utility communicates with the fingerprint sensor service via TCP/IP.
Therefore, any firewall that blocks traffic on the local computer will block the communication.
*After changing my firewall settings, fingerprint sensor works* on my R700 flawlessly now.

Always fail to deploy to server when (Create a Simple EJB Session Bean )

Hi,
I'm trying the "Oracle JDeveloper 11g Tutorials" - "Create a Simple EJB Session Bean", I just follow the instructions in that page. But when I tried to run it, it always failed. Can anyone help me to have a look. I paste the log below. thank you.
There's an error in the log "java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener". but I don't know what's that meaning.
E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;e:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;e:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;e:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;e:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;e:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;e:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;e:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;E:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=e:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;e:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;e:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;e:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;e:\Oracle\MIDDLE~1\JDK160~1\jre\bin;e:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;G:\D\JACKYH\Installed\apache-ant-1.7.1\bin;C:\Program Files\TortoiseSVN\bin;C:\Program Files\CollabNet Subversion;U:.;V:.;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
e:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -DproxySet=false -Djbo.34010=false -Xverify:none -da -Dplatform.home=E:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=e:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;e:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;e:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<12/11/2008 10:54:31 AM EST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
E:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;E:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<12/11/2008 10:54:32 AM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<12/11/2008 10:54:32 AM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<12/11/2008 10:54:33 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<12/11/2008 10:54:33 AM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<12/11/2008 10:54:34 AM EST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<12/11/2008 10:54:36 AM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<12/11/2008 10:54:38 AM EST> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<12/11/2008 10:54:38 AM EST> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<12/11/2008 10:54:39 AM EST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<12/11/2008 10:54:39 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<12/11/2008 10:54:39 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.12.54:7101 for protocols iiop, t3, ldap, snmp, http.>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<12/11/2008 10:54:39 AM EST> <Warning> <Server> <BEA-002611> <Hostname "jackyh.dst.com.au", maps to multiple IP addresses: 192.168.12.54, 127.0.0.1>
<12/11/2008 10:54:39 AM EST> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 192.168.12.54, 127.0.0.1>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<12/11/2008 10:54:39 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 13829 ms.
DefaultServer started.
[Running application SessionEJB on Server Instance DefaultServer...]
---- Deployment started. ---- 12/11/2008 10:54:43
Target platform is (Weblogic 10.3).
Running dependency analysis...
2008-11-12 10:54:43.882: Writing EJB JAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB\SessionEJB-Project1-ejb
2008-11-12 10:54:43.914: Wrote EJB JAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB\SessionEJB-Project1-ejb
2008-11-12 10:54:44.148: Writing EAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB
2008-11-12 10:54:44.164: Wrote EAR file to E:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\SessionEJB
Deploying Application...
<12/11/2008 10:54:46 AM EST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1226447686226' for task '0'. Error is: 'weblogic.management.DeploymentException: '
weblogic.management.DeploymentException:
     at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
     at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
     Truncated. see log file for complete stacktrace
>
<12/11/2008 10:54:46 AM EST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'SessionEJB'.>
<12/11/2008 10:54:46 AM EST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.management.DeploymentException:
     at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
     at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
     Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application SessionEJB on DefaultServer.: .
weblogic.management.DeploymentException:
#### Deployment incomplete. #### 12/11/2008 10:54:46
oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
     at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
     at oracle.jdevimpl.runner.adrs.AdrsStarter$4$1.run(AdrsStarter.java:1316)
Caused by: oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
     ... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
     ... 12 more
#### Cannot run application SessionEJB due to error deploying to DefaultServer.
[Application SessionEJB stopped and undeployed from Server Instance DefaultServer]

Steve,
I'm facing the same issue as user#####.
Your workaround does not work ; when I deploy manuelly the ear file, with a new weblogic-application.xml, I get the same error.
Does that happen a lot ? :p
Edit :
my web.xml :
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<description>Empty web.xml file for Web Application</description>
<context-param>
    <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
    <param-value>client</param-value>
</context-param>
<context-param>
    <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
    <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
    <param-value>false</param-value>
</context-param>
<context-param>
    <description>Whether the 'Generated by...' comment at the bottom of ADF Faces HTML pages should contain version number information.</description>
    <param-name>oracle.adf.view.rich.versionString.HIDDEN</param-name>
    <param-value>false</param-value>
</context-param>
<filter>
    <filter-name>JpsFilter</filter-name>
    <filter-class>oracle.security.jps.ee.http.JpsFilter</filter-class>
</filter>
<filter>
    <filter-name>trinidad</filter-name>
    <filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
<filter>
    <filter-name>adfBindings</filter-name>
    <filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
</filter>
<filter-mapping>
    <filter-name>JpsFilter</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
    <dispatcher>INCLUDE</dispatcher>
</filter-mapping>
<filter-mapping>
    <filter-name>trinidad</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
</filter-mapping>
<filter-mapping>
    <filter-name>adfBindings</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
</filter-mapping>
<servlet>
    <servlet-name>Faces Servlet</servlet-name>
    <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
</servlet>
<servlet>
    <servlet-name>resources</servlet-name>
    <servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet-mapping>
    <servlet-name>Faces Servlet</servlet-name>
    <url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/afr/*</url-pattern>
</servlet-mapping>
<session-config>
    <session-timeout>35</session-timeout>
</session-config>
<mime-mapping>
    <extension>html</extension>
    <mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
    <extension>txt</extension>
    <mime-type>text/plain</mime-type>
</mime-mapping>
</web-app>Luc-
Edited by: Lucas Ismag on 4 déc. 2008 05:33

First flexunit test is always failing with Error Error #1009: Cannot access a property or method of

Hi,
I have flexunit project which I am trying to run on linux server.
1. I have Tests project.
2. I am trying to compile it on linux server and creating Tests.swf file and then executing Tests.swf using ant on 64 bit linux server using standalone flash debug player.
3. Tests project contains 4 tests and first tests always fail with following error,
    test:
     [flexunit] Validating task attributes ...
     [flexunit] Generating default values ...
     [flexunit] Using default working dir [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests]
     [flexunit] Using the following settings for the test run:
     [flexunit] FLEX_HOME: [/var/lib/flex4.1sdk]
     [flexunit] haltonfailure: [true]
     [flexunit] headless: [false]
     [flexunit] display: [99]
     [flexunit] localTrusted: [true]
     [flexunit] player: [flash]
     [flexunit] port: [1024]
     [flexunit] swf: [/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf]
     [flexunit] timeout: [60000ms]
     [flexunit] toDir: [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/report]
     [flexunit] Setting up server process ...
     [flexunit] Entry [/mnt/build/VinitFlexUnitBranch/workspace/bin] already available in local trust file at [/home/deploy/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
     [flexunit] Executing 'gflashplayer' with arguments:
     [flexunit] '/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf'
     [flexunit]
     [flexunit] The ' characters around the executable and arguments are
     [flexunit] not part of the command.
     [flexunit]
     [flexunit] Starting server ...
     [flexunit] Opening server socket on port [1024].
     [flexunit] Waiting for client connection ...
     [flexunit] Client connected.
     [flexunit] Setting inbound buffer size to [262144] bytes.
     [flexunit] Receiving data ...
     [flexunit] Sending acknowledgement to player to start sending test data ...
     [flexunit]
     [flexunit] FlexUnit test pause in suite Tests.Classes.DummyASyncTest had errors.
     [flexunit]
     [flexunit] Stopping server ...
     [flexunit] End of test data reached, sending acknowledgement to player ...
     [flexunit] Closing client connection ...
     [flexunit] Closing server on port [1024] ...
     [flexunit] <testcase classname="Tests.Classes::DummyASyncTest" name="pause" time="8" status="error"><error message="Error #1009: Cannot access a property or method of a null object reference." type="Tests.Classes::DummyASyncTest.pause" ><![CDATA[TypeError: Error #1009: Cannot access a property or method of a null object reference.
     [flexunit] at org.fluint.uiImpersonation.flex::FlexEnvironmentBuilder/buildVisualTestEnvironment()
     [flexunit] at org.fluint.uiImpersonation::VisualTestEnvironmentBuilder/buildVisualTestEnvironment()
     [flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher/getStage()
     [flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher()
     [flexunit] at org.flexunit.internals.runners.statements::StackAndFrameManagement()
     [flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withStackManagement()
     [flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withDecoration()
     [flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/methodBlock()
     [flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild()
     [flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
     [flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
     [flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
     [flexunit] at org.flexunit.runners::ParentRunner/run()
     [flexunit] at org.flexunit.runners::Suite/runChild()
     [flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
     [flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
     [flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
     [flexunit] at org.flexunit.runners::ParentRunner/run()
     [flexunit] at org.flexunit.runners::Suite/runChild()
     [flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
     [flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
     [flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
     [flexunit] at org.flexunit.runners::ParentRunner/run()
     [flexunit] at org.flexunit.runner::FlexUnitCore/beginRunnerExecution()
     [flexunit] at org.flexunit.runner::FlexUnitCore/verifyRunnerCanBegin()
     [flexunit] at org.flexunit.token::AsyncCoreStartupToken/sendReady()
     [flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/sendReadyNotification()
     [flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/handleListenerReady()
     [flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
     [flexunit] at flash.events::EventDispatcher/dispatchEvent()
     [flexunit] at org.flexunit.listeners::CIListener/setStatusReady()
     [flexunit] at org.flexunit.listeners::CIListener/dataHandler()
     [flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
     [flexunit] at flash.events::EventDispatcher/dispatchEvent()
     [flexunit] at flash.net::XMLSocket/scanAndSendEvent()]]></error></testcase>
     [flexunit] <endOfTestRun/>
     [flexunit] Analyzing reports ...
     [flexunit]
     [flexunit] Suite: Tests.Classes.DummyASyncTest
     [flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
     [flexunit]
     [flexunit] Results :
     [flexunit]
     [flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
     [flexunit]
    BUILD FAILED
    /mnt/build/VinitFlexUnitBranch/workspace/src/Tests/build.xml:26: FlexUnit tests failed during the test run.
    at org.flexunit.ant.tasks.TestRun.analyzeReports(Unknown Source)
    at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
    at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.Target.execute(Target.java:390)
    at org.apache.tools.ant.Target.performTasks(Target.java:411)
    at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
    at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
    at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
    at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
    at org.apache.tools.ant.Main.runBuild(Main.java:809)
    at org.apache.tools.ant.Main.startAnt(Main.java:217)
    at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
    at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
    Total time: 1 second
Exited with status 1
[deploy]$
4. Everytime I run this, any test which is run first will fail and all other tests will pass.
My Tests.as file is as below:
* Tests.as
package
import Tests.XTestSuite;
import flash.display.Sprite;
import mx.core.FlexSprite;
import org.flexunit.listeners.CIListener;
import org.flexunit.listeners.UIListener;
import org.flexunit.runner.FlexUnitCore;
public class Tests extends Sprite
public var flexSprite:FlexSprite;
public function Tests()
onCreationComplete();
public function onCreationComplete() : void {
var core : FlexUnitCore = new FlexUnitCore();
core.addListener(new CIListener());
core.runClasses(Tests.XTestSuite);
public function currentRunTestSuite():Array
var testsToRun:Array = new Array();
testsToRun.push(Tests.XTestSuite);
return testsToRun;
XTestSuite try to run 4 flexunit test classes.
one of that flexunit test script class is as below:
package Tests.Classes
import flexunit.framework.Assert;
import org.flexunit.Assert;
import org.flexunit.asserts.assertEquals;
public class DummyASyncTest
[Test]
public function pause() : void
assertEquals(true, true);
trace("I M in dummy");
All other tests are dummy tests which just asserts(true, true).
I am not sure if I doing something wrong or forgot to take care of something.

Hi,
I have flexunit project which I am trying to run on linux server.
1. I have Tests project.
2. I am trying to compile it on linux server and creating Tests.swf file and then executing Tests.swf using ant on 64 bit linux server using standalone flash debug player.
3. Tests project contains 4 tests and first tests always fail with following error,
    test:
     [flexunit] Validating task attributes ...
     [flexunit] Generating default values ...
     [flexunit] Using default working dir [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests]
     [flexunit] Using the following settings for the test run:
     [flexunit] FLEX_HOME: [/var/lib/flex4.1sdk]
     [flexunit] haltonfailure: [true]
     [flexunit] headless: [false]
     [flexunit] display: [99]
     [flexunit] localTrusted: [true]
     [flexunit] player: [flash]
     [flexunit] port: [1024]
     [flexunit] swf: [/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf]
     [flexunit] timeout: [60000ms]
     [flexunit] toDir: [/mnt/build/VinitFlexUnitBranch/workspace/src/Tests/report]
     [flexunit] Setting up server process ...
     [flexunit] Entry [/mnt/build/VinitFlexUnitBranch/workspace/bin] already available in local trust file at [/home/deploy/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
     [flexunit] Executing 'gflashplayer' with arguments:
     [flexunit] '/mnt/build/VinitFlexUnitBranch/workspace/bin/Tests.swf'
     [flexunit]
     [flexunit] The ' characters around the executable and arguments are
     [flexunit] not part of the command.
     [flexunit]
     [flexunit] Starting server ...
     [flexunit] Opening server socket on port [1024].
     [flexunit] Waiting for client connection ...
     [flexunit] Client connected.
     [flexunit] Setting inbound buffer size to [262144] bytes.
     [flexunit] Receiving data ...
     [flexunit] Sending acknowledgement to player to start sending test data ...
     [flexunit]
     [flexunit] FlexUnit test pause in suite Tests.Classes.DummyASyncTest had errors.
     [flexunit]
     [flexunit] Stopping server ...
     [flexunit] End of test data reached, sending acknowledgement to player ...
     [flexunit] Closing client connection ...
     [flexunit] Closing server on port [1024] ...
     [flexunit] <testcase classname="Tests.Classes::DummyASyncTest" name="pause" time="8" status="error"><error message="Error #1009: Cannot access a property or method of a null object reference." type="Tests.Classes::DummyASyncTest.pause" ><![CDATA[TypeError: Error #1009: Cannot access a property or method of a null object reference.
     [flexunit] at org.fluint.uiImpersonation.flex::FlexEnvironmentBuilder/buildVisualTestEnvironment()
     [flexunit] at org.fluint.uiImpersonation::VisualTestEnvironmentBuilder/buildVisualTestEnvironment()
     [flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher/getStage()
     [flexunit] at org.flexunit.internals.runners.watcher::FrameWatcher()
     [flexunit] at org.flexunit.internals.runners.statements::StackAndFrameManagement()
     [flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withStackManagement()
     [flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/withDecoration()
     [flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/methodBlock()
     [flexunit] at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild()
     [flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
     [flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
     [flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
     [flexunit] at org.flexunit.runners::ParentRunner/run()
     [flexunit] at org.flexunit.runners::Suite/runChild()
     [flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
     [flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
     [flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
     [flexunit] at org.flexunit.runners::ParentRunner/run()
     [flexunit] at org.flexunit.runners::Suite/runChild()
     [flexunit] at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep()
     [flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete( )
     [flexunit] at org.flexunit.internals.runners.statements::StatementSequencer/evaluate()
     [flexunit] at org.flexunit.runners::ParentRunner/run()
     [flexunit] at org.flexunit.runner::FlexUnitCore/beginRunnerExecution()
     [flexunit] at org.flexunit.runner::FlexUnitCore/verifyRunnerCanBegin()
     [flexunit] at org.flexunit.token::AsyncCoreStartupToken/sendReady()
     [flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/sendReadyNotification()
     [flexunit] at org.flexunit.runner.notification.async::AsyncListenerWatcher/handleListenerReady()
     [flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
     [flexunit] at flash.events::EventDispatcher/dispatchEvent()
     [flexunit] at org.flexunit.listeners::CIListener/setStatusReady()
     [flexunit] at org.flexunit.listeners::CIListener/dataHandler()
     [flexunit] at flash.events::EventDispatcher/dispatchEventFunction()
     [flexunit] at flash.events::EventDispatcher/dispatchEvent()
     [flexunit] at flash.net::XMLSocket/scanAndSendEvent()]]></error></testcase>
     [flexunit] <endOfTestRun/>
     [flexunit] Analyzing reports ...
     [flexunit]
     [flexunit] Suite: Tests.Classes.DummyASyncTest
     [flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
     [flexunit]
     [flexunit] Results :
     [flexunit]
     [flexunit] Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.008 sec
     [flexunit]
    BUILD FAILED
    /mnt/build/VinitFlexUnitBranch/workspace/src/Tests/build.xml:26: FlexUnit tests failed during the test run.
    at org.flexunit.ant.tasks.TestRun.analyzeReports(Unknown Source)
    at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
    at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.Target.execute(Target.java:390)
    at org.apache.tools.ant.Target.performTasks(Target.java:411)
    at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
    at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
    at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
    at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
    at org.apache.tools.ant.Main.runBuild(Main.java:809)
    at org.apache.tools.ant.Main.startAnt(Main.java:217)
    at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
    at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
    Total time: 1 second
Exited with status 1
[deploy]$
4. Everytime I run this, any test which is run first will fail and all other tests will pass.
My Tests.as file is as below:
* Tests.as
package
import Tests.XTestSuite;
import flash.display.Sprite;
import mx.core.FlexSprite;
import org.flexunit.listeners.CIListener;
import org.flexunit.listeners.UIListener;
import org.flexunit.runner.FlexUnitCore;
public class Tests extends Sprite
public var flexSprite:FlexSprite;
public function Tests()
onCreationComplete();
public function onCreationComplete() : void {
var core : FlexUnitCore = new FlexUnitCore();
core.addListener(new CIListener());
core.runClasses(Tests.XTestSuite);
public function currentRunTestSuite():Array
var testsToRun:Array = new Array();
testsToRun.push(Tests.XTestSuite);
return testsToRun;
XTestSuite try to run 4 flexunit test classes.
one of that flexunit test script class is as below:
package Tests.Classes
import flexunit.framework.Assert;
import org.flexunit.Assert;
import org.flexunit.asserts.assertEquals;
public class DummyASyncTest
[Test]
public function pause() : void
assertEquals(true, true);
trace("I M in dummy");
All other tests are dummy tests which just asserts(true, true).
I am not sure if I doing something wrong or forgot to take care of something.

Airport fails to connect at login (only)

Using a MacBook with OSX 10.5, I am trying to connect to a WPA2 Enterprise network. All of the settings are correct, and the certificate is set on 'always trust'.. but on startup/login, Airport fails to connect (no error message, but IP address is self-assigned). If I turn airport off and back on, it properly connects instantly, with no prompts at all.
Does anyone know a reason why the machine would be unable to automatically connect to the network at login, but able to just fine if I manually turn the airport off and back on?

Hmm.. in retrospect this probably isn't the right sub-forum for this question.. it should maybe go in a sub-forum for OS X 10.5 instead (it's not related to the airport basestation). Please feel free to move this, if so.

Iphone4 fails to connect to AppleTV very often

hi..my iphone4 fails to connect to my AppleTV very often. Sometimes it gets connected without i doing anything. Sometimes even if try connecting through the i remote, it looks for the Apple TV and then says turn on Home Sharing. My Home sharing is always on. Funny thing is sometimes when i open you tube etc, it already shows the Airplay icon. Other times (When i really need it), the Air Play icon is missing....Pls help.

A Gen4 TC should not run too hot.. yes, when backing up with the disk running for extended periods then they do run pretty hot.. but once the disk spins down they should cool off..
Is the disk spinning down?? Stick your hand on it and feel... stick your ear over the fan area.. right behind the power socket and listen if the fan is running.. on a gen4 it should.
Raise the TC on pencils or chop sticks or erasers or bottle tops.. make sure it doesn't sit on the bench.
If you are running the latest firmware.. go back. In fact on a 12month old TC you might be able to go back to 7.5.2 firmware. (hold the option key when you select firmware updates, to show all possible updates and downgrades.)
The latest firmware offers nothing but trouble.. for the vast majority of people.
Do you still have AppleCare on a computer.. that will cover your TC as well. Take it back to Apple if you are worried..
There is no difference whatsoever between the two model TC except the size of the drive.

ArkVPN always fails to connect VPN

Similar Messages

Maybe you are looking for