Arm for record disappears
I use to be able to begin a new multi-track session and select arm for record.
Now, when I would open a new multi-track, the "R" was grayed out. I can add a new track to record into, but if I save and close the session to come back to later, I can no longer arm the track.
I'm on a Mac. I've checked Audition > Preferences > Audio Hardware to make sure the microphone is selected. And still I cannot arm the track to record.
What am I missing?
Thank you.
...and is the microphone showing up as the default input on your Windows audio control panel and, if so, is the sample rate/bit depth (on the Advanced panel of Windows audio) set to the same settings as your existing session?
Similar Messages
-
I am using Adobe Audition 3.0
I put together some mp3 tracks using multi track viewer, like a trailer.
I want to record and save this but there seems to be a problem as when I click the record button it straight away says "at least one track must be armed for recording". I then look to each track where it says "R" in small, and when I hover the mouse it says "Arm for record". However I cannot click this as it is grey.
What do I do? How do I record this as trailer, I do not want to use microphone for recording my voice, I just want this trailer to be saved as MP3 so it can go on disk. Last time I made trailer was on Apple Garageband and I wanted to record to save final version and was OK. I did not use microphone because I did not need to use voice.
Please help me, I would appreciate.I could be mistaken but I believe you are talking about mixing down your multitrack files into a single stereo file.
To do this, click edit from the menu, and mixdown, all tracks as stereo. -
Midi and Audio tracks simultaneously armed for recording
All, whilst engaged in laying down the bass track for the guitar solo section of my latest monster his, I encountered one of those sorts of frustrations that makes one long for some means of swift egress from this mortal coil, this vale of tears: that is, while laying down my totally awesome bass track that when they hear it will send JP Jones and Boosty Collins to employee as actuaries, I kept getting the hateful "unable to synchronize the audio and midi error." I'll spare you the catalog of the various lame attempts I understood to remedy this problem, as well as the curses directed toward my fate, and Daw ineptitude in general. Then I nnoticed that both the software instrument tracks (Addictive drums) and the audio track (aforementioned bass) were both armed for recording, signified by the red R in the track header! Well, upon de-arming the software instrument track I was able to record by bass line in a mimimum of takes, and as visions of illegal intozicants and comen of questionable morals dance through my noggin as recompsense for my trouble, with to make the point to all relative newbies such as myself that the answer to problems that seem on surface intractable as usually staring you right in the glazed eyeball.
What?...
I'm sorry maybe I don't understand everything you are sayng... but I can replay to the titles of the Topic!
Actually recording a MIDI instrument and an Audio Track symultaneously comes with serious bug!!!
you cannot use Punch-in on Fly when an Audio and instrument track is armed at the same time...
or better you can but the MIDI and audio output will be dropped for a moment
Provide a Logic feedback
http://www.apple.com/feedback/logicpro.html!
THIS IS A LOGIC 8 BUG!!! BIGGEST SERIOUS BUG!
I suggest you to use Logic 7 when you need that!
Thank you so much for remember me this..
I'm sorry no alternative solution... or.. if you have 2 Macs you can use one for Logic MIDI and another one for Logic Audio!
G -
Which input for recording computer sounds
I have recorded a number of tracks via my Soundblaster Line in input to AA. I have a software drum module which I want to record via AA, but I cant seem to get AA to register this input. It's not inputting via any line/mic/etc input, as it is on the computer already. Am I selecting the wrong input? I have tried a few of them on the list and none seem to work. Any ideas? Thanks.
If I open the Creative Audio Console, it has an option to record. You can select input for the recorder, and if I select "what u hear" then the equaliser bars respond to the drum software. However, in AA I cannot find an option to record "what u hear" or any equivalent - all the inputs seem to be for external sources (line in, digital in) and a few I don't understand (mix FL, mix RL) - if I choose these two latter ones, I get a sudden crescendo of feedback which causes the input level monitors to go into the red and cut out.
Update: I went into AA audio hardware setup and selected "Audition 3.0 windows sound" as the audio driver. The only output available is "SPDIF out". Now, I am able to select "what u hear" as a recording input!! HOWEVER, when I click "arm for record", I get the error message:
Adobe Default Windows Sound Driver
Device: SPFID Out (Creative SB X-Fi)
Errorcode: FFA-8-000D [800705aa]
Info: Playback failed. The audio system does not seem to respond. Maybe card does not support full duplex mode.
I am now able to record computer sounds, though I cannot hear the recording nor the playback when I am finished. If I set the device back to "Creative ASIO" then I am able to hear what I recorded.
My soundcard is a Creative 7.1 X-FI Elite Pro, which supports full duplex.
Would really appreciate any help ! -
I can't Arm any track for recording. I've closed the program, rebooted, etc. with no luck. When I first open Audition, with no session loaded, I can Arm a track. But when I load my session I can't Arm any track. I've checked Audio Hardware Setup and all seems OK. Anyone know what might be happening? Thanks.
I found the problem. Each track had the 'Input' button (right below the volume and pan buttons) set to none. How this happened I'm not sure. Probably when I opened another program that took over ASIO and changed AA3.
I found the answer at http://forums.digitalmedianet.com/cgi-bin/readwholethread.fcgi?forum=adobe_audition&post= 060922041404.htm&toppostid=425
They were discussing another problem but was able to get my answer from the topic they were discussing. -
DNS - A Record Disappears while AAAA Record for Host is registered
Hi,
I have a strange issue. Recently we have noticed dynamically registered IPv4 addresses disappearing from our internal Windows DNS forward lookup zones.
I don't run our very large DNS environment, so unfortunately, I can't examine the configuration. The problem seems to be tied to Windows servers with IPv6 enabled (windows 2008 and Windows 2008 R2 servers).
In our Windows server configuration, we allow the check mark for "Allow this connection to be registered in DNS" to be selected in the TCP/IP settings of the production IP address for the server.
Periodically, we have noticed that the IPv4 A records disappears from DNS while the AAAA IPv6 address for the server remains in tact.
I have been troubleshooting this problem from the server side (DNS client side). It appears that if I disable 6TO4 IPv6 addresses from the server and then restart the server, the problem goes away (IPv4 address comes back in DNS after the reboot).
To disable IPv6 transition technologies, we implement DISABLECOMPONENTS = 1.
Although, this work around seems to solve all of our problems, I don't understand why the IPv4 address gets removed in the first place? I suspect a misconfiguration on the DNS server.
More information:
Overall IPv6 Problem: By default, the 6to4 tunneling protocol is enabled in Windows 7, Windows Vista, Windows Server 2008 R2, and Windows Server 2008 when an interface is assigned a public IPv4 address (that is, an IPv4 address that is not in the ranges
10.0.0.0/8, 172.16.0.0/12, or 192.168.0.0/16). 6to4 will automatically assign an IPv6 address to the 6to4 tunneling interface for each such address that is assigned, and 6to4 will dynamically register these IPv6 addresses on the assigned DNS server. If this
behavior is not desired, we recommend disabling IPv6 tunnel interfaces on the affected hosts. In the company network, it also appears that IPv6 registration sometimes causes IPv4 A records to be removed in DNS. Microsoft has informed us that this http://support.microsoft.com/kb/2782438
might be the reason for the behavior. But I am still pressing to root cause because we are not using DHCP in our server vlans.
Using the options to disable IPv6 described in article 929852 is fully supported by Microsoft: Microsoft Answer: "Disabling IPv6 is not recommended but it's completely supported, but you might have to enable it back in future if you are going to implement
new technologies like DirectAccess etc, which needs IPv6."
Microsoft recommends that we use DisabledComponents = 1 for all Windows 2008 and Windows 2008 R2 servers that are problematic: This will disable IPv6 transition technologies and Servers will not get IPv6 address
It has also been asked that instead of disabling IPv6 on all of our Windows servers can we just disable IPv6 on the DNS servers: Microsoft Answer: disabling IPv6 only on DNS Servers will not help, as it will not stop clients from registering their IPv6 address.
Disabling IPv6 will impact applications that require IPv6. The known application services are: HomeGroup and DirectAccess -- we do not believe our company is currently using these technologies.Disappearing DNS records may point to duplicate AD zones, so the first thing to do, is let's eliminate if there are any duplicate AD zones.
Using ADSI Edit to Resolve Conflicting or Duplicate AD Integrated DNS zones
http://msmvps.com/blogs/acefekay/archive/2009/09/02/using-adsi-edit-to-resolve-conflicting-or-duplicate-ad-integrated-dns-zones.aspx
Additional reading:
DNS Records Disappearing and DNS Auditing
http://msmvps.com/blogs/acefekay/archive/2010/12/09/dns-records-disappearing-and-dns-auditing.aspx
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights. -
I am trying to integrate Lion Server Open Directory with Active Directory.
I can create augmented records in /LDAPv3/127.0.0.1/Augments, either directly using dscl or through Server.app's function to import users from another directory.
However, after I reboot the server, all augmented records disappear.
I've been going after this simple goal for many hours, without success. I've gone so far as to do a clean reinstall of Lion Server. But nothing I have been able to do will change the fact that augment records do not persist through reboots.
I wonder if this is a bug in my procedure, or in Lion Server. Can anyone confirm that persistent augmented records can be created in Lion Server?I too have experienced disappearing augments, with 10.7.2. On my last attempt however, I made a brand new NetInstall of 10.7.2 (as outlined here) and the augments seemed to persist.
However, augments, although still supported by Apple, seem to work very differently in Lion.
The scenario we have is that we need to log in with AD credentials, and if you're on a Mac, the home folder is mounted from a Lion Server via AFP (we leave the original AD home folder in their profile in Windows untouched, so they can happily go back to Windows) Essentially two home folders.
This was all fine under 10.6 but the "merge" that used to happen on Snow Leopard (i.e. seeing your augments from a dscl search on a boound client) doesn't work as intended, at least not yet.
From Apple's official documentation you can create an augment on a server and connect to that server with credentials on the "master" server. This has to be done now in order to become a member server in an AD domain. Simple example would be... I have a Windows AD user called "bobjones" if I try to access an AFP share on a Lion server using bobjones, it doesn't work, even if the server is bound to AD. You have to create the augment first, then you can access the AFP share.
What I was expecting from augments is a way to "bolt on" various attributes, which would allow me to access my Lion server with AD credentials, this is essentially what Apple say in the on-line guides. First thing I want to do is "bolt on" a Mac home folder, like we did in 10.6 server... that worked great.
Anyway sorry to hijack your thread slightly, but I seemed to have solved the disappearing augments problem by doing a clean install, but I wish to expand upon this to create proper augments which would be great when integrating your Macs into large Windows systems... -
How do I initialize a DVD to prepare for recording data?
Using an S5150t pavilion, LightScribe drive. How do I initialize a DVD to prepare for recording data? The HP Digital Media program only addresses pictures and video.
Bill, here is a guide to using CyberLink DVD Suite 6. This is the program that the Product Specifications page states is on your computer.
Please let us know if this solves your problem or not.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Can you add a past event Into iCal? I want to do this for record keeping.
I want to add past events to my icalendar for record keeping. When I try it disappears right after I add. Can I do this?
You don't mention your OS or iCal versions but, based on my own OSX.6.8 and iCal v4.0.4 (1395.7) then go to ...
iCal > Preferences > Advanced
... and look at the Option for Delete events n days after they have passed and ensure that either the option is not checked (which should keep past events for ever) or set to the number of days after which you are happy that past events get deleted.
Other parameters can also be set for the treatment of To Do items within that same preference panel.
I guess, although I do not know, that other versions of iCal and Calendar have similar options somewhere within user customisation. -
Armed track records ALL tracks
I've tried searching for a solution to my problem before posting but couldn't find anything. Here's my problem:
When I arm a track for recording and then hit record all the music from my existing other tracks get recorded onto the new armed track, instead of just the input I am trying to record, in this case a guitar.
I assume it's something to do with the audio setup, soundcard config, input/output or monitoring etc. but I just can't figure it out. I've currently got my monitoring set to External Mix because when I select Audition Mix (Smart Input or Always Input) a horrible distortion creeps into my headphones & increases until I de-arm the track.
Also, I can hear my desired input in my headphones so it seems like the basic input is working. I just need to 'cut out' the input of all the other tracks.
I used to be able to record just fine, but my computer has had some rough times & something obviously changed in my setup.
Thanks!function(){return A.apply(null,[this].concat($A(arguments)))}
jcs35 wrote:
"All questions that it is possible to answer get one at AudioMasters, quite promptly"
^AAAbsolutely 100% not true.
is this a joke? anybody can go the forum buddy and there's many questions on the board right now, very pertinent questions that have not been answered. I'm sure somebody knows the answer or atleast could say that there is no way of accomplishing a specific task yet nobody has.
very snooty over there too, you can get banned for typing in the wrong syntax...people are over there apologizing for making two posts in the same week for fear of getting banned.
You're running a nazi concentration camp over there, snap out of it you morons, that board is doomed if it continues on it's current path.
I don't need to defend Steve G and the forum moderators etc at AudioMasters but
(a) Steve's comment on questions being answered at that forum "where answers are possible" is "AAAbsolutely 100% true"
(b) You, and one or two others like you, are at least a substantial part of the reason why this Adobe forum is much less popular and much less used than it used to be.
You really do NOT need to belittle and use obscene language to or about people whose views you disagree with. I for one very much echo Steve's sentiment, which others have voiced in various posts, that it is a great shame that the lack of moderation/supervision here allows such posts as yours to remain on public view for all to read.
Jeff -
Two or three weeks ago, I had a cracked screen replaced on my iPad Mini 2 with retina display (32G). It worked perfectly for 2-3 weeks, so I don't know how relevant the screen repair is. Anyway, the iPad is currently running iOS 8.1.3. I completely reset it because I want to sell it, but recently, the screen display started to have issues. One afternoon I turned it on and the screen was a faint gray with vertical streaks that went away after I turned it off then back on. That night, the screen would stay black when I tried to turn it on. It was a different black to being off, though. When I try to turn it on it changes to a brighter black, if that makes sense. I can see a change in the shade of black, but there's no color or app icons. The sound works even when the screen doesn't. The only way I can get it to turn on properly is if I hold it in my hands/arms for 2-3 minutes. I think the heat from my hands has something to do with it. It's just weird that regular room temperature seems to be too cold. We've had a cold winter in NY this year and my iPad may have spent 1-2 hours in my cold car the day this happened, but I can't say for sure. Has anyone else heard of this issue or does anyone have a solution?
I Also have this problem!!
In my situation, the screen simply started exhibiting the same symptoms a few weeks ago (early February) for no apparent reason. At first I thought the screen was dead, but discovered the heat solution by accident. Now I turn it on and keep it from going to sleep until I go to bed. Thank goodness the battery is still awesome on this thing.
I bought it new and still has the original screen, I keep it at home (never below 62 degrees). Coincidentally, this happened a day or two after the expiration of the warranty!! Any help figuring this one out would be eternally appreciated.
iPad mini retina Wi-Fi, iOS 8.1.3 -
Report for "record payment history" for customer ?
Report for "record payment history" for customer ?
Please send it.Dear Goutam
Through <b>FBL5N</b>, you have to select "<b>Cleared items</b>" with "from to date" and execute.
You will get a list which can then be downloaded as excel by selecting "List" on top left followed by "export" and "spreadsheet".
Thanks
G. Lakshmipathi -
Command or Canvas Events for Recording ?? Please Help..
Hi I am Abhijith I am a total newbie to the j2me world, And I am learning it now,
My project topic is "Bluetooth Walkie Talkie " , And I am trying my best and putting
all my efforts to code incrementally by learning , Before I could implement bluetooth,
I thought let me complete the recording The audio and playing part first,
The recording and playing of audio is working fine , But i would like to do it a real manner as Real Walkie talkie does, I want to record audio ONLY when the Key is being
pressed , and when its released it should exit the player hence saving the recorded file,
(Actually i dont want to save it in future,i would be sending the bytearray though the bluetooth , but for now , I want the Current module to be ready)
I tried my best searching online to implement my requirement but the couldnot find
such events I found Canva's KEYPRESS, KEYRELEASE , etc events but they dint not
serve my purpose, Let me clearly tell where I am stuck , After the midlet starts(by launching it) then i would like to press a key( keypressed say No 5) for certain
amount of time and the audio should be recorded only for the keypressed duration ,
after I release , it should stop recording and save as a wav file .
Whats happening is When i keep the key pressed , The midlet asks whether to allow
the recording , for this purpose when I release key the control is going out, and
i am not able to achieve the needed , I am posting the code here, Please Help me.
I am not asking for the complete spoon feeding or ready made code, But as a beginner
I need help from you all to learn and implement it.(at least it should satisfy me,i would feel i have learnt something then)
Here below is my code ( i AM using WTK 2.5 )
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.*;
import java.io.*;
import javax.microedition.media.control.*;
import java.util.*;
import javax.microedition.io.*;
import javax.microedition.io.file.*;
public class Key extends MIDlet{
private Display display;
private KeyCodeCanvas canvas;
public Key(){
display = Display.getDisplay(this);
canvas = new KeyCodeCanvas(this);
protected void startApp(){
display.setCurrent(canvas);
protected void pauseApp(){}
protected void destroyApp( boolean unconditional ){
notifyDestroyed();
class KeyCodeCanvas extends Canvas implements CommandListener{
private Command exit;
public StringItem message ;
private Player player;
private byte[] recordedAudioArray = null;
private String keyValue = null;
private Key midlet;
Thread t = null;
private String eventType = null;
public KeyCodeCanvas(Key midlet){
this.midlet = midlet;
exit = new Command("Exit", Command.EXIT, 1);
addCommand(exit);
setCommandListener(this);
protected void paint(Graphics g){
g.setColor(255, 0, 0);
g.fillRect(0, 0, getWidth(), getHeight());
if (keyValue != null){
g.setColor(0, 0, 255);
g.drawString(keyValue + eventType+message, getWidth() / 2, getHeight() / 2,
Graphics.TOP | Graphics.HCENTER);
public void commandAction(Command c, Displayable d){
String label = c.getLabel();
if(label.equals("Exit"))
midlet.destroyApp(true);
protected void keyPressed(int keyCode){
eventType = "pressed";
keyValue = getKeyName(keyCode);
repaint();
public void keyReleased(int keyCode)
try
eventType = "released";
keyValue = getKeyName(keyCode);
repaint();
catch (Exception e)
System.out.print(e);
public void keyRepeated(int keyCode)
eventType = "repeated";
keyValue = getKeyName(keyCode);
try
Thread t1 = new Thread()
public void run()
try
player = Manager.createPlayer("capture://audio?encoding=pcm");
player.realize();
RecordControl rc = (RecordControl)player.getControl("RecordControl");
ByteArrayOutputStream output = new ByteArrayOutputStream();
rc.setRecordStream(output);
rc.startRecord();
player.start();
eventType = "Recording";
message.setText("Recording...");
Thread.sleep(5000);
message.setText("Recording Done!");
rc.commit();
recordedAudioArray = output.toByteArray();
player.close();
catch (Exception e)
}; t1.start();
catch (Exception e)
repaint();
//Runnable r1 = new Runnable()
// public void run()
// try
// System.out.print(" here 1");
// message.setText(" here 1 ");
// player = Manager.createPlayer("capture://audio?encoding=pcm");
// player.realize();
// RecordControl rc = (RecordControl)player.getControl("RecordControl");
// ByteArrayOutputStream output = new ByteArrayOutputStream();
// rc.setRecordStream(output);
// rc.startRecord();
// player.start();
// eventType = "Recording";
// message.setText("Recording...");
// Thread.sleep(5000);
// message.setText("Recording Done!");
// rc.commit();
// recordedAudioArray = output.toByteArray();
// player.close();
// catch (Exception e)
}I am really sorry at the end I messed with the code and its altered a Lot, But hope the
logic Will is clear which is my requirement . I know the code for recording and
playing is not complete as said, i Messed around a working code and tried adding Canavs
for keyrepeat method,tried putting a thread around , AT last totally messed,
I tried working on this for two days but couldn't be successfull , Please Help me!!
The control goes out when midlet asks whether to allow recording ,
I thank you anticipation ...
-Abhijith RaoMidlet asking whether to allow the recording are typical permissions prompts specified by MIDP security policy. You need to sign the MIDlet and give it proper permissions.
Problems like this were discussed in an older thread at WTK forum: *[MIDlet keeps asking for permission.|http://forums.sun.com/thread.jspa?threadID=5347313]* According to one of the posters in the thread, +"...I got it to work on the emulator by setting the permission to 'manufacturer'. It runs smoothly without annoying questions..."+
If you're interested, check documentation and tutorials on MIDP security policy for more details.
For events to record audio only when the key is being pressed, consider GameCanvas API, method getKeyStates.
I am not certain though if doing it this way is a good idea. I doubt that phone users have same habits as those of walkie-talkies; for them it might be indeed more comfortable to use single simple key presses to start and finish recording. -
How do I use optical input for recording in Garageband 9?
Hi,
I'm trying to use the Optical Line Input on my G5 for recording in Garageband, using a MOTU 828. I have the 828 optical output connected to the optical audio input on the G5, and I have Digital In (Optical digital-in port) selected in system preferences/sound. But in Garageband preferences, optical or digital input is not among my choices. If I select system setting or built-in audio 2, I get no signal. If I select MOTU 828, it defaults to the analog master outputs on the 828.
I am a Logic 8 user, and I'm able to select the optical input in Logic with no problem. I have my MOTU audio setup set so that the optical output is the default output, but Garageband still seems to use the analog output. I can tell by the record level, which is considerably louder for analog than for optical.
Any suggestions?
Thanks!create a new fla, add btn and add the code i suggested. test.
var count:int;
var imageArray:Array=["1.jpg","2.jpg","3.jpg","4.jpg","5.jpg","6.jpg","7. jpg",
"8.jpg","9.jpg","10.jpg","11.jpg","12.jpg","13.jpg"];
var ldr0:Loader=new Loader();
ldr0.contentLoaderInfo.addEventListener(Event.COMPLETE,loadCompleteF);
var ldr1:Loader=new Loader();
ldr1.contentLoaderInfo.addEventListener(Event.COMPLETE,loadCompleteF);
btn.addEventListener(MouseEvent.CLICK,clickF);
function clickF(e:MouseEvent):void{
// initialize count
count=0;
// call loadF
loadF();
function loadF():void{
// add one of the loaders to the top of the displaylist and load the next image
addChild(this["ldr"+count%2])
this["ldr"+count%2].load(new URLRequest(imageArray[count]));
function loadCompleteF(e:Event):void{
// increment count
count++;
// check if the last has loaded
if(count<imageArray.length){
// if not clear the content out of the next loader.
if(this["ldr"+count%2].content){
this["ldr"+count%2].unloadAndStop();
// and call loadF so the next loader can load the next image in the array
loadF();
} else {
// if the last has loaded.
// last load completed -
: how can I import mp3s from my gmail account into my iTunes application so that I can import audio for recording into GarageBand ?
Save the file from Gmail onto your computer and add it to iTunes. How you save from Gmail is a Gmail question (their own support pages), not an iTunes question.
Maybe you are looking for
-
Acrobat 10: We cannot search for words containing French accents.
For example, if we copy a word like "Transporté" and paste it in the search field in Acrobat (Reader, Standard and Pro), it appears "transport´e" and the search fails.
-
How to create a boot disc from Lion pre installed into my Macbook Pro 2011 ?
Hi guys, I want to know how to create a boot disc from Lion pre installed into my New Macbook Pro ? I want to re-install the Lion from zero. When I bougth it I´ve used the Migrant assitance and now I want to re-install the Lion. How can I do it ? tha
-
Acrobat 9 Pro Thumbnails not embedding
Hi A problem I am having is that when I embed thumbnails in a pdf, they aren't embedding. If I scroll down the pages window I have to wait for them to appear. And if I rotate one of the pages, the thumbs again disappear and I have to wait again. Anyo
-
Mail: show flagged messages in all folders?
Mail's "Flagged" smart mailbox only displays flagged messages in my inbox. Can I make the smart mailbox display flagged mesages in all of my folders?
-
CustomNode not recognized as its class type but as class javafx.scene.Node
In the following code... Stage { title: "Circles" scene: Scene { width: 200 height: 100 content: Box {} class Circle1 extends CustomNode { public var Name: String = "Circle1"; public var Radius: Integer = 50;