Arrange & Environment Window not linking correctly?!

hi there,
I just converted from Logic 7 and noticed that my environment is not following 'jumping' to the object I select in the arrange window? I do have the 'same level link' button switch on and it worked perfectly in Logic 7. Since I do have a big environment layer with instruments/ tracks in different rows (specially setup for my needs) and only a selection can be seen at one moment, I have to manually look in the environment where the object is located. is it a bug? or do I miss here something.
I just hope anyone has an idea how I can solve it. Many thanks in advance.
Sebastian

solved

Similar Messages

ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
the Arial Font.
How can we correct this problem?
Regards
Udo
These are the files changed by Fontsolution Configuration Script:
uifont.ali
# uifont.ali provided in fontsolutions.tar for developer 9.0.2
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Revision: /main/22 $
# Copyright (c) Oracle Corporation 1994, 2002.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
"Sadvocra" = helvetica..Oblique.Medium
"sAdC128d" = helvetica..Plain.Medium
"CarolinaBar-B39-25F2" = helvetica...Bold
#"IDAutomationSMICR" = helvetica
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York" = times
#geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
# MICR font
#helvetica=IDAutomationSMICR
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
arial = Arial
"arial" =Arial
"arial narrow" = "Arial Narrow"
"courier new" = "Courier New"
tahoma = Tahoma
"microsoft sans serif" = "Microsoft Sans Serif"
"ms sans serif" = "MS Sans Serif"
"times new roman" = "Times New Roman"
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
helvetica..Oblique.Medium = "Sadvocra.ttf"
helvetica..Plain.Medium = "Sadc128d.ttf"
helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Embedding entry. Entries
# in Font Embedding will take precedence over the entries in Font Subsetting
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
uiprint.txt
# This is the printer configuration file.
# The format for entries in this file is:
# <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
# The first field is the name of the printer. It is the name you give
# to lpq.
# The second field is the type of driver to be used for the printer.
# Currently, "PostScript" and "ASCII" are the only types of driver for
# printers supported for now. But in future we may be supporting
# drivers for other printer types.
# The third field is the version of the type of printer driver. It's 1
# or 2 for all PostScript printers; or 1 for ASCII printers.
# The fourth field is a long description of the printer. This will be
# presented to the user in the "Choose Printer" dialog window.
# The fifth field is the printer description file to be used. For
# PostScript printers it is the PPD file of the printer. (This field is
# currently unused for ASCII printers.)
# You can use default.ppd for the description file if you don't have a
# PPD file for the printer, but it's best to use the correct PPD file
# for the printer.
# You must fill in at least the first two fields (printer name and
# type). If the version is empty, it defaults to "1"; if the long name
# or description are empty, they will default to empty strings. A
# version of 1 or an empty long name is fine, but, for PostScript
# printers, you must fill in the description file name.
# You don't have to update this file to use any printer. The printer
# chooser interface let's you select a printer and driver at run time,
# as well as associate a printer description file to the printer. You
# should list all printers accessible to users here, however, to
# simplify selecting a printer.
# The first entry in this file will be used as the default printer, if
# no printer was selected in the operating system. (For Unix, the
# following environment variables will be used in turn to get the
# default printer's name:
# TK2_PRINTER
# ORACLE_PRINTER
# PRINTER
# For other platforms, see the Installation and User's Guide for your OS
# for information on setting the default printer.)
# WARNING: Do not define multiple entries for the same printer by the
# same name. Selecting a printer with multiple entries will always result
# in the first entry being selected. Instead, see if your OS allows you
# to create an alias for the printer, and use an alias for the second type.
# The following are examples; replace them with printers accessible from
# this machine.
# hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
# hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
# hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
# hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
# hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
# --- Note that the following two printers are aliases for the same
# --- physical printer, with different names for different types:
# tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
# tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
# Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
datap462.ppd
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
OpenUI Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
CloseUI: Option1
*CloseGroup: InstallableOptions
UIConstraints: Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*% This datap462.ppd is provided by fontsolutions.tar
*DefaultFont: Courier
*Font ArialMT: Standard "(001.004)" Standard ROM
*Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font ArialNarrow: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
*Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
*Font CourierNewMT: Standard "(001.004)" Standard ROM
*Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Tahoma: Standard "(001.001)" Standard ROM
*Font Tahoma-Bold: Standard "(001.001)" Standard ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
count 1 gt
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
{exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
Pete

Table of content in .book is not linked correctly, it is linked to it self.

Hi!
I desperately need some advice on an urgent matter. I made a perfekt little .book-file with a table of content at the front of the book.
Then I realized that when i turned it in to a .pdf the table of content ( it is also shown i the left-window when I look at it in acrobat ) is duplicated. The left window show my table of content and it links to the text-rows in the table of content, and then below that it shows the rows of the table of content again, but this time it links to the actuall correct pages.
How can I get rid of this duplication, and just get the correct indexing linking to the pages, but at the same time keeping my table of content in the front of the book?
Kind regards
Veronika D

When converting a FrameMaker book to PDF, the PDF may include bookmarks for additional paragraph tags (on top of those specified in the book's PDF setup)
The workaround is to specify PDF Setup in the individual file. For example, open your TOC, select Format > Document > PDF Setup, and make sure that the Heading1TOC, Heading2TOC... paragraph tags are not included in the bookmark setup.
Shlomo Perets
MicroType * http://www.microtype.com
FrameMaker training & consulting * FM-to-Acrobat TimeSavers
"Improve Your FrameMaker Skills" live web-based training sessions

Open Browser Window - Not working correctly.

I click the thumbnail on my homepage, I get a larger image in
a new window. Unfortunately, the homepage also redirects itself to
the larger image. You can see this at www.real9.com
I want the homepage to stay where it is, but the larger
window to open in a new window. I used the Open Browser window in
Dreamweaver to set this link up, but its not doing what I want it
too.
Help would be much appreciated, I have been trying to fix
this problem, but no success.
Thank you.

On Sun, 08 Apr 2007 21:01:21 +0100, djinn
<[email protected]> wrote:
>In the link fields for rather than linking to the file or
image - enter
>this........
>
>javascript:;
That's one way of handling it. My own preference is to leave
the link in
there and add a return false after the onclick handler. That
way the
link will still work if JavaScript is not available.
To implement that, your onclick for the link looks like this:
onclick="MM_openBrWindow('pics/inside_large.jpg','LargePicture','width=640,height=480')"
Change it to:
onclick="MM_openBrWindow('pics/inside_large.jpg','LargePicture','width=640,height=480');re turn
false"
Careful of word wrap. It's all on one line.
Gary

Authorisation object F_T011 not linked correctly to authorization

Hello Everybody,
I get an authorisation problem, I hope to be in the correct forum.
I am about to adapt some rules for Fi user. When using transaction code S_ALR_87012284, I get an error message about a missing authorisation.
After running SU53, I see that the object F_T011, with the activity 03 and the statement version I required are missing.
In PFCG, I added manually in my rule these missing authorisation. I generated the rule but the problem is still happening. In debug mode I see effectively that the "authority-check" on this authorisation object F_T011 is missing.
In looking in PFCG, I see that my authorisation object F-T011 was added to the authorisation T-BT19013100. But if I run SUIM to see the authorisation object presents in the authorisation T-BT19013100, I see all the other object but not object F_T011.
It seems that a link or something like that is missing between the authorisation and the authorisation object.
Does someone have an idea ?
If someone want more details or screenshots of PFCG or SUIM to better see what I explained, don't hesitate to answer.
Thanks in advance,
Regards
Céline JOMARD

I find the solution : It seems that I needed to regenerate after transport the rule in the other client.

Addthis - in snippet not linking correctly

(THIS topic has been answered and the links in this first entry will no longer show the errors I described as they have been fixed on the web)
I added the following code into an "HTMK SNippet" in iWeb:

<script type="text/javascript" src="http://s7.addthis.com/js/250/addthis_widget.js#username=xa-4b8b7e353859d7a 7"></script>

It appears to work, but when I click on the link it creates in Facebook, it takes me all the way to the widget, not the page I'm trying to share.
You can view the button here:
http://www.hushaboo.com/Hushaboo/Hushaboo.html
and where the shared link takes me is here:
http://hushaboo.com/Hushaboo//Hushaboofiles/widget2markup.html
Any thoughts? Am I supposed to edite the code I got from Addthis.com?
Message was edited by: DaveF
Message was edited by: DaveF

Found the answer:
You need to modify the URL that's shared. See the below code:
Code:

<script type="text/javascript" src="http://s7.addthis.com/js/250/addthis_widget.js#username=lewiswalch"></scri pt>

Replace "http://www.example.com" with your home page URL, or whatever URL you're trying to share.

AudioServices not linking correctly

For some reason whenever I try to run code that calls AudioServicesPlaySystemSound, or related methods, it fails to compile with this linker error:
ld: symbol(s) not found
collect2: ld returned 1 exit status
Even Apple's Metronome sample code won't compile. AudioServices.h is imported, I've tried AudioToolbox.h as well, but nothing seems to work; ld just can't find those functions.
Any ideas?

I made the error disappear into a warning
by adding a #define AudioServicesCreateSystemSoundID at the top of the page. Now, however, that call will return a -1073749220 error whenever trying to load an audio file that exists. I've tried wav, aif, and caf, even the caf's included in Apple's metronome, none of which work. What is wrong with AudioServices?

External stylesheets not linking correctly

I am working on a site with external CSS files. When I open any shtml file the style is not taken in to account in the design view. When try and access the style sheet from the CSS styles panel or any other way it says mester.css cannot be found. The site was created with a custom template .dwt created by another designer in CS3, I am using CS4.
The code linking the style sheet goes back to root like this:
<link rel="stylesheet" href="/css/master.css" type="text/css" media="screen" />
<link rel="stylesheet" href="/css/mobile.css" type="text/css" media="handheld" />
<link rel="stylesheet" href="/css/print.css" type="text/css" title="defaultprint" media="print" />
I have found that by removing the / before the css directory DW does find the stylesheet. However I don't want to have to go through EVERY page and remove the /. Is there any way to get DW to work with this format? I tried updating the template but when I save the template there is not option for me to go back and update the pages that were created using this template.
Any thoughts?

If you use the common way of linking style sheets (for example, href="css/master.css") you are using a link that is relative to the current page.
However, if you use a forward slash in front of the css folder, href="/css/master.css, the leading forward slash means that the css folder is at the root of the site. So, if you move the css folder to the root directory, your css should kick in.

Design Window Not Displaying Correctly

In MX 2004, I have a layout in which the column structure is
set forth in CSS, but the columns then contain HTML-defined tables.
Is this mixture problematic in MX 2004? If I hit F12 or upload, the
result is fine, but in the Design window, the display is thoroughly
broken. Elements are skewed left-right-up-down, or don't appear at
all. I'm flying blind.
Is this problem known in MX 2004? If so, is it one of the
things that "expanded CSS support" of Dreamweaver 8 fixes? I'm
loath to upgrade if all I get is the same limitation.
Thanks in advance

> Is this mixture problematic in MX 2004?
No. Most likely your code is 'troubled', even if it looks OK
in the
browser. Can you post a link to the page? Does the page
validate?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"anabasis37" <[email protected]> wrote in
message
news:evpi7j$b3i$[email protected]..
> In MX 2004, I have a layout in which the column
structure is set forth in
> CSS,
> but the columns then contain HTML-defined tables. Is
this mixture
> problematic
> in MX 2004? If I hit F12 or upload, the result is fine,
but in the Design
> window, the display is thoroughly broken. Elements are
skewed
> left-right-up-down, or don't appear at all. I'm flying
blind.
>
> Is this problem known in MX 2004? If so, is it one of
the things that
> "expanded CSS support" of Dreamweaver 8 fixes? I'm loath
to upgrade if
> all I
> get is the same limitation.
>
> Thanks in advance
>
>

Files not linking correctly

So kind of a weird issue. I have a folder called "Project" inside that folder is the indesign file then a "links" folder that contatins jpgs/eps etc...
Now when I decided to copy the entire "Project" folder to the desktop then opened the indesign file in there... for some reason all the links were still pointing to the orginal version instead of the files links in the duplicated version. On co workers computer this isnt' happening but mine it is? Anyone have a clue what's going on here??? Any help wold be awesome!!!

I think you all have missed the point here.
Sure, you can relink to folder, or you can package and have ID rewrite the links to the package folder, but that has nothing to do with HOW links work. If you COPY a .indd file to a new folder it keeps the same links, so neither of those suggestions will make any difference on the same machine UNLESS the link paths EMBEDDED in the file cannot be found.
Packaging works for MOVING a project to a new location because it takes the links along, and since the old locations are no longer accessible ID starts to look for them in the current directory. Relink to folder would only work if the the relinked folder also happened to be in the same directory as the ID file, and the two are moved together (essentially doing an artificial "package"). As long as ID is able to see links in the original locations, it will use them. On the same machine, either option can be used to create a copy with new link locations (and package is easier), but if you copy the folder again to another location on the same machine you just recreate the problem.

Windows not appearing correctly

Hi all. Glad I found this forum.
I am using SGD to run an app. An initial menu is built and displayed, and it does come up, but recently something broke (and of course I don't know of anything that changed). The initial menu has no title bar. It is jammed all the way into the upper left corner of the desktop. And, if I click on any of the items that bring up other windows, that window appears in the exact same place, jammed up in the left corner, and also, with no title bar. (That means I can't dismiss it, and can't get to the underlying menu either).
Here is a [screen shot|http://www.box.net/shared/0hdbsyzii9] of the menu that should have a title bar, but doesn't.
Also, and I'm sure related, clicking in the desktop used to bring up a menu where I could start Xterm, etc. Now, clicking does nothing.
So, there is something wrong with twm, or SGD config, or something. I don't know what.
Any ideas on this one?
Thanks.
Tom

This is fixed. The window manager was set to mwm, instead of twm.

Table of contents not linking correctly

Hi, I created a table of contents using a header I created called Chapter Titles. It formatted everything correctly and lists the correct page numbers next to it. The only problem is that when I click on the numbers it sends me to the previous chapter. For example if I click on a chapter that says it starts of page 7, it brings me to the chapter before that is actually on page 3.

Very odd!
Seems Pages 5 all you do is chase rabbits down rabbit holes.
I like being able to do T.O.C.s for every section but with all the other downgrades in Pages 5 it isn't worth fighting.
Pages '09 should still be in your Applications/iWork folder and just works, much better than its "upgrade".
Wait for Pages 5 to get out of beta and rate/review it in the App Store.
Peter

Updating my Win7 to 12.1, I get 'iTunes was not installed correctly Error 7 (Windows error 127). If I try to launch, I get 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'. Help!

Windows version 7. Auto update of iTunes to version 12.1 from 12.0.1.
At end of install process, message 'iTunes was not installed correctly. Error 7 (Windows error 127).
Tried to launch iTunes, anyway, but immediately got message 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'.
Tried downloading iTunes and updating manually - get exactly the same result.
No problem using iTunes before this.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2

Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help me

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. and 'iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 193)

Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2

Arrange & Environment Window not linking correctly?!

Similar Messages

Maybe you are looking for