Arrange trigger order?

I had a problem in a compostion slideshow widget, and could not sort it out, so I ended up deleting one of the targets altogether. Unfortunately, the target was my home/landing page and the new trigger is now at the very end of the range. Now I am looking at copy/pasting a very large amount of content to get my pages rearranged, unless there is away to bump my trigger order. Please tell me there is a way...

1) Save a copy of your .muse file (so you have it to go back to if this doesn't work the first time).
2) Click the plus to add another trigger container / target container pair to the composition widget.
3) Select the newly added trigger so it's active.
4) On the on-object UI change the Position to Scattered, if it isn't already Scattered (this will be temporary)
5) Select the newly added target container.
6) Use the Object menu to "Send To Back".
7) Select the newly added trigger container.
8) Use the Object menu to "Send To Back".
9) In the on-object UI set the Position back to whatever it was.
This workaround is taking advantage of a bug where using bring to front / end to back on trigger or target containers will re-order them for auto-play. It's a bug because the ordering for autoplay shouldn't be altered by the z-order of the items, and worse because if you change the z-order of a trigger and not the corresponding target then the triggers and targets in the entire composition widget will then be mismatched.
After you go through the steps above, verify the auto play order is what you want and also verify that each of the triggers takes you to the correct associated target. If it doesn't revert to the saved backup for your .muse file and try again.

Similar Messages

Is there a way of displaying the various item in my Downloads folder as icons arranged in order of Date Created, such that the most recent items appear at the bottom, rather than the top?

Is there a way of displaying the various item in my Downloads folder as icons arranged in order of Date Created, such that the most recent items appear at the bottom, rather than the top? I know this can be done when they are displayed as a list, but I want icons!

Hi geezer,
when you open your 'Downloads' folder choose 'View' in the Menu bar and choose:
'as List'
'Show View Options'
In 'View options' window you tick:
'Always open in list view'
'Date Modified', or
'Date created'
Now inside the 'Downloads' folder click on 'Date Created' (or 'Date Modified')
column to get items alined from oldest to newest date (or reverse)…

Arranging Song Order - Zen Nano P

When I put my music into folders on my Nano it arranges them alphebetically and I don't see a way to change the track number (the way I arrange song order on my Nomad). I would like them in the order I am used to hearing them on the cd.

i read the faq and i'm having the same problem. i downloaded the media software from the website but i noticed it didn't include the media explorer. does just the cd software that came with the player contain it's i'm a little fustrated. does anybody have anymore input.

Post-query trigger order for data blocks in master detail relationship

Using Forms [32 Bit] Version 10.1.2.2.0 (Production) Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production.
I have the following problem with a form I am working on. It has a master data block with multiple detail data blocks. I am trying to create a post-query trigger on one of these detail blocks that will do a select using the value of a field from another of the detail blocks.
The problem is that the post-query trigger of the data block I am trying to do the select with is firing before the post-query trigger of the block I need the value from is firing. I tested by just putting in a display message and having it return the value of the id I am tryign to use. Right after I do a query on the form, I get the messages saying:
"Error: cannot find price for id:" and there is no id, and then the message from the other datablocks post-query saying, "id is: 123"
Is there a way to change the order that the datablocks are queried? Or should I be using a different trigger to do this?

Do you mean as it is displayed in the object navigator? It's not the first block under the data block section, but it is above the other block that is exceuting before it, so I assumed the order in that did not matter.
EDIT: Thanks Magoo! That solved the issue.
Edited by: a small rabbit on Sep 4, 2009 11:28 AM

How can I arrange the order and position of add ons in a single add-on toolbar?

I have several add-ons in the bottom add-on toolbar in firefox 4. I would like to arrange them in a specific order and have them justify to the right side of the browser. Currently they are on the left side of the add-on bar.

When you're in the Toolbar Customize mode there's a large Flexible Space in the Add-on Bar, move all the Add-on icons to the right-side of that white Flexible Space and into the order that you want them. If any of those icons are enclosed together by a light rectangle, those are older Statusbar icons which can't be manually re-ordered and will be moved together as one group - the bad thing about Mozilla "grandfathering" the old Statusbar icons.

How do I arrange the order of icons on the printer's touch screen panel? (Office Jet Pro 8600)

There has to be a way to remove apps from the screen and to re arrange. The only one I use is scan to email and it is buried 7 screens deep.
Does anybody know how to do this? This is really annoying and I would not have bought the rpinter if you can't rearrange and remove icons.
I don't care about Tony Robbins.
Help

Hi @Tires1961,
Welcome to the HP Support Forums. I understand that you would like to move the Scan to Email app to the front of the line on your Officejet 8600 printer.
Please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How can I arrange the order of pictures in a slide show and add a caption to each?

I go to:www.photoshop.com/users/name. Then to My Gallery and click onto the album name then to "slide show." I want to reorder the pictures and add captions. How?

Go to your photoshop.com website. Log in if needed. Click on "Online Tools." Choose "Photoshop Express Organizer." Click and drag photos into the order you want.
Captions might best be added in the Elements Editor Organizer (99jon is correct) by double-clicking on thumbnail to make a full screen image, then a line appears under the photo and asks you to print your caption there. Sync it with your online website.
Bill

Trigger Order Acknowledgement automatically

Hi,
We have a requirement wherein the sales order order acknowledgement is to be triggered when the line items in the sales order get confirmed.
Please let me know how can this be achieved; is there any BADI / user-exit which might help ?
The scenario is that the user shall create a sales order, but on saving the order, the order acknowledgement should not be triggered. We have a batch job which updates the confirmed qty in the sales orders on a daily basis at night. Once the order gets a confirmed qty, the order acknoeldgement should be automatically triggered.
Please guide.
Thanks.

Hello,
There is SAP std. message output type BA00 for "Sales Order confirmation" with condition record's dispatch mode set as '1'. You can use it for your requirement.
After order confirmation job complete, you can setup job with RSNAST00 to triggered order confirmation.
NACE T-code for V1(sales) output
Dispatch time 'F4' help
RSNAST00 Program

Settings to trigger Order response IDOC

We need send order reponse to external customers using IDOC. What are the settings/steps to generate order response or any outbound IDOC from CRM (5.0, 6.0, 7.0)? We are planning to use IDOC type CRMXIF_ORDER_SAVE_M02.
Prompt response highly appreciated.
Regards,
Netaji Nikam

if you want the order response , you need to consider this as inbound interface . you need to configure a new interface for this and make the following settings in the R/3 and XI
R/3
WE20 - Add the order response in the Inbound parameter for the r/3 partner type.
XI
Import the meta data of the order reponse idoc in IDX1.
Configure IR and ID objects seperately.
Thanks

Can you arrange icon order on screen?

I have a Sprint Curve 8330 and is there a way to make the icons appear on the screen in the order I want them in rather than the default order?
I want messaging up top, not Sprint TV.......
Solved!
Go to Solution.

Hi, and welcome to the forums,
Highlight the icon press the menu key and select move!
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Image Upload and Resize Trigger Order Question

Hello All,
I do enjoy and like using the ADDT, however I do have a problem with the Image Upload and Resize trigger.
I understand that this trigger is of the AFTER type, and as such, the insert record I have on the page is implemented first and the data is inserted into the table, then images uploaded provided they are smaller than 200 kB in size.
However, as I have a field that is unique in the database, if the upload fails I am unable to upload any files which are under the size and put that information into the database, as there is already a record with the unique value.
Is there an easy way to work around this by trying to capture the error before the data is inserted into the database?
An idea I have is to: check the unique field with the value to be inserted, if fails, change unique value -> nothing inserted yet, no files uploaded.
If the unique check passes, insert remaining data and trigger the upload and resize image trigger, once that is complete, have an update of the table to update with the unique value.
I can see the above working, (I think), but I just have to write the code to implement the idea.
I am not sure how to use the roll-back triggers either, if the Upload Image trigger fails, to remove the inserted record. But if I can manage the roll-back trigger to remove the record, that is an option to consider for what I want to achieve.
Thanks to any help people can provide.
Cheers,
Ian.

Thank you for your reply.
I have a work-around, I have split the forms over two pages, rather than put everything on one page - which introduced another issue, to which I have made a work-around of sorts too.
The two forms, on different pages, is probably a better idea in terms of better management of data input. The work-around was a Header redirect based on a form variable, as, if I used a Custom Trigger to dynamically generate a new URL, it generated an escaped-encoded URL - to which I have not figured out how to fix.
So, in the meantime, it works, so I will settle for that at the moment.
Again, thanks for you reply.
Ian.

How to arrange photo orders for slide show?

Hello,
The photos I uploaded to the iPod are in seemingly random order. How is that order determined? Should I rearrange them in iTunes or in the original folder first? How would I do so? Thanks!

I have been following this thread with great interest. I have tried to do this in Aperture as well. Jumping ahead just a bit to what might be David's next issue, once we figure out why the option is not available to him.
For me once the music has been added the " Align slide to the beat" is available. However it doesn't seem to do anything.
I have accomplished this in iMovie and Final Cut Express. In both of these programs you have to actually mark the beats for things to work. You mark the beats and the software sets the play duration to match. This is pretty easy in iMovie. I am hoping for a similar or better interface in Aperture 3. How is this accomplished in Aperture?

Crash opening form because of wrong trigger order

Hello.
Have you met somebody with this:
User with privileges set on open form cannot open form.
When user open form from menu...
- first start up menu there set role command executed and all is OK.
But in some cases trigger WHEN-CREATE-RECORD fired first
and if there is select statement then trigger crashed becase set role didn't executed and user have not privileges to select.
I must write statements for testing if WHEN-NEW-FORM-INSTANCE fired and don't execute select statements while WNFI ended up.
<<<????>>>

Scott,
I assume that your PhaseListener doesn'tdistinguish between the actual navigation and the JSF postback that is issued to the same page. In your case I assume that the PhaseListener is invoked on postback and thus ADF Faces points to the "old pagedef" file.
Frank

10.8.4 mac book pro arranging photo order manually

My intent is to arrange my photos manually inside my albums. I have noticed that this option is greyed out when I go: View- sort photos- manually. I used to move my photos around by dragging them when I was on the 10.4 version of my MPB. Now, when I click and drag a photo, the photos in between the spot of my destination do not "open space". My photos are already separated by album. Thanks!

Understood. Dragging should be done not under folder but under the album. Thanks anyway. It should have been easier to get. I guess other people get equally stuck.

Can I arrange the order of my accounts in order of my priority use

I have various email accounts they are in the order I added them.
is there any way I can move the account up or down the order

Go to the add ons page and search for Manual Sort Folders. This add on will do what you want.

Arrange trigger order?

Similar Messages

Maybe you are looking for