Array rebuild problems

Hi
Here's the situation, when replacing our broken raid drive it rebuilt the array, having rebuilt, it somehow messed up all the resource forks for the os9 files stored on it. We do have all the data backed up on tape but the backup system is windows based and failed to backup the resource forks as they weren't unix files.
Our main problem is quark files, I can open them on my mac using quark 6 as it's osx based, but I'm the only one in the company who has quark 6, is there any way of re-cxreating the resource forks so that they can be read by quark 4? Is there a nifty 3rd party piece of software that will scan a volume and rebuild all the resource forks for the os9 files - or am I just clutching at an impossible dream!!!!

Think I've fixed it.
By adding a physical extention (.qxd) to the end of the quark file then opening it from within quark and not via double-clicking, it opens, once you save it from here the file is fine and the same as it was before.
For some reason, even with the .qxd extention it won't open in quark by double-clicking, only through the file menu. Also it won't work if you try this on an osx machine, only if you're booted in os9.
weird but it works.

Similar Messages

Array p410i logical drive rebuild problem

I have 4 SAS 147GB hard disk run under raid 1+0, two of them have 'Predictive to fail soon' message (one in Bay 1 and other one in Bay 3), I replace one of them but unable to rebuild. It stucked at 10%.
I read somewhere it says upgrade the firmware might solve this problem, it that true. Anyone have solution.
Many thanks

Hi:
You may also want to post your question in the HP Business Support Forum -- Disk Array section.
http://h30499.www3.hp.com/t5/Disk-Array/bd-p/itrc-195#.UgBiUul8O9I

Associative Array (Object) problems

Here is the function i'm dealing with
i'm reading in a delimited string and using indexed arrays to
break them up and assign the keys and values to an associative
array in a loop.
i'm using variables in the loop and the array loads as
expected in the loop
but outside the loop, the only key is the variable name and
the value is undefined
this is true using dot or array notation, as well as literal
strings for the keys
any help is appreciated
watchSuspendData = function (id, oldval, newval):String {
//the incoming suspendData string is delimited by the
semicolon;
//newval is: firstValue=Yes;captivateKey=1
var listSuspendData:Array = newval.split(";"); // convert it
to a list of key/value pairs
if (listSuspendData.length > 0){
//line 123: listSuspendData.length is: 2
for (i=0; i < listSuspendData.length; i++){ //for each
key/value pair
var keyValArray:Array = new Array();
var myNameValue:String = listSuspendData
//line 127: listSuspendData is: firstValue=Yes
keyValArray = myNameValue.split("="); // split 'em on the
equal sign
var myKey:String = keyValArray[0];
var myVal:String = keyValArray[1];
//keyValArray[0] is: firstValue
//keyValArray[1] is: Yes
// store the key and the value in associative array
suspendDataArray.myKey = myVal;
trace("line 134: suspendDataArray is: " +
suspendDataArray.myKey);
// trace is line 134: suspendDataArray is: Yes on the first
pass and 1 on the second
//the below loop always returns one array key: myKey and the
value as undefined
for(x in suspendDataArray){
trace("x is: " + x); //x is: myKey
trace("the val is: " + suspendDataArray.x); //the val is:
undefined
} //end for
return newval;

on lines 12-13 i assign the key=value pair to string
variables
then on lines 17-18 i assign those values to the associative
array using dot notation
the trace seems to work there
the problem is that when the procedure exits the for loop,
the associative array only has one key (myKey) and no value
(undefined)
all the documentation i've read shows using these types of
arrays with either non-quoted property names like:
myAssocArray.myKey = "somevalue";
or
myAssocArray[myKey] = "somevalue";
i tried assigning the key/value pairs directly from the
indexed arrays, but the result was always undefined
like this:
suspendDataArray.keyValArray[0] = keyValArray[1]
or
suspendDataArray[keyValArray[0]] = keyValArray[1]
i even tried building a string in the loop and trying to
assign all the pairs at once using the curly brace
this is pretty wierd behavior for actionscript or i'm missing
something basic here
thanks for looking

How to confirm a successful LUN rebuild , after raid 5 Array rebuild. Disk Fail

I've been running a ESXI 5.5 host with various linux , BSD, and Windows VM's, recently had a Host kernel Panic as a result of SAS drive failure. HP proliant ML 350 G6 with a P410i raid controller, replaced HDA re-ran SMART smart to configure array. Rebuild was successful, C wont boot MBR or start up issues cant find mboot32 within systlinux . So re-installed ESXI 5.5 to flash drive booted ESXI from but cannot mount or scan datastores / or storage ISCSI controller to retrieve or extract VMDKs .
HELP please!!
This topic first appeared in the Spiceworks Community

Thanks for your reply. Do you have any idea how to re-initialize the drive? It now seems to be marked as spare(?) and any operations on it are rejected:
> sudo raidutil modify drive --removelocalspare -d 3 -r RS1
Modifying drives...   FAILED.
The drive is in use and is unable to be set unconfigured.
> sudo raidutil modify drive --removeglobalspare -d 3
Modifying drives...   FAILED.
The drive is in use and is unable to be set unconfigured.
> raidutil list status
Apple raidutil version: 1.3.0
General Status: Issues Found
        The volume [R4V1:RS1 [ID: 4]] is degraded.
        The volume [Vol-RS1:RS1 [ID: 4]] is degraded.
        Raidset (RS1) is degraded.
Battery Status: Charged
Controller #1: Hardware Version 2.00/Firmware E-1.3.2.0
                Write Cache enabled
Volume            Status            Type       Drives       Size Comments
R4V1              Is Viable         RAID 5     1,2,4      3.23TB Is Degraded
Vol-RS1           Is Viable         RAID 5     1,2,4      2.00TB Is Degraded
> raidutil list driveinfo
Drives Raidset       Size      Flags
Bay #1 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Bay #2 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Bay #3 <none>          2.00TB   IsReliable IsNotAssigned
Bay #4 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable

Recurring Rebuild Problem: Invalid Element....

I keep getting this recurring error when i try to rebuild my project:
Error(25,16): Invalid element 'mime-mapping' in content of 'web-app',
expected elements '[error-page, taglib, resource-env-ref, resource-ref,
security-constraint, login-config, security-role, env-entry, ejb-ref,
ejb-local-ref]'.I have also seen similar errors such as:
Error(9,11): Invalid element 'servlet' in content of 'web-app',
expected elements '[error-page, taglib, resource-env-ref, resource-ref,
security-constraint, login-config, security-role, env-entry, ejb-ref,
ejb-local-ref]'.I am using JDev 10g Production.
The problem occurs when when trying to compile a jsp using Struts Tiles. Here is a sample of one of the jsps:
<%@ taglib uri="/WEB-INF/struts-tiles.tld" prefix="tiles"%>
<tiles:insert page="layout_main.jsp" flush="true">
    <tiles:put name="title" value="Condo"/>
    <tiles:put name="header" value="header.jsp"/>
    <tiles:put name="left" value="left.jsp"/>
    <tiles:put name="center" value="center_condo.jsp"/>
    <tiles:put name="right" value="right.jsp"/>
</tiles:insert>I have had the project rebuild properly once with this same web.xml file and had no problems. I have not made any changes to the web.xml. I also ran the xml syntax validator on it and it is valid.
This is a very weird problem. Sometimes re-arranging the web.xml file fixes the problem. The sample web.xml may be too big for a single post, but I can email to someone that can help. I have seen others on this forum that have posted the same problem with no solution. Please help. Thanks,
Paul Manning

Figured it out.
When editing the web.xml you need to preserve the order listed in the error message.
So in my case, the "welcome-file-list" needs to appear before tagLibs but after the mimeList.
Hope this helps someone. JDeveloper is not conforming to the Spec on this one but I can cope. In my experience the "welcome-file-list" can appear any where nested in the webapp tag. Oh well, not the end of the world...
Paul Manning

Spreadsheet to array memory problems

I'm trying to read a large .csv file (329 MB) and display a user selected column of data on a graph. I have a standalone executable that does this wonderfully, however, I cannot contact the developer of this application to ask questions. I just have the standalone executable, no code. So I'm trying to write my own application with a slight modification. The problem is I run out of memory for LabVIEW.
In the standalone execution the memory usage is as follows:
515 MB - baseline memory usage
523 MB - application starts
1.25 GB - open 329 MB .csv file
1.5 GB - open additional 63.6 MB .csv file
Data from the first column is displayed on a graph. Memory usage does not seem to change at all when I'm selection columns from either file for plotting on the graph. CPU usage is also minimal when selecting columns; at most an occasional spike of 20%.
In my application the memory usage is as follows:
515 MB - baseline memory usage
587 MB - LabVIEW starts
598 MB - application starts
657 MB - open 63.6 MB .csv file
1.10 GB - convert spreadsheet string to 2D array
2.04 GB - replace 1st row
and then LabVIEW runs out of memory. I've enclose the subVI that actually reads the .csv file and converts it to a 2D array. Why is LabVIEW running out of memory for my application and not the standalone application? Theories?
Attachments:
ExtractPortion.vi ‏33 KB

Hey all,
The in place element structure should be relatively straightforward, once you understand the concept behind it, which is that it keeps everything in the same memory location and does think about resizing it. Thus, deleting items in an in place structure would not function. Replacing items should however, as discussed in this help document: http://zone.ni.com/reference/en-XX/help/371361G-01/glang/in_place_element_structure/ and as shown here:
I tried to reproduce your issue, but I managed to make both notepad and word crash in the production of a large enough CSV file. My recommendation is go ahead and split the file up if at all possible. Since you said the code fails on the delete node, you could also simply use the array subset function to pull out all but the line you want to delete, rather than asking labview to give you a second memory location. On the other hand, on my computer the problem occurs at the VI which converts to a spreadsheet string--however, if I set .csv to false (meaning that VI does not have to convert to a float) it does not have a problem. My suggestion would be to convert it to a string first, then use the in place element structure to convert items one by one to the %f format, rather than %s. This is especially true since you are converting string to %f and then back to string (because you selected a 2-d string array as your output).
Thanks,

Array declaration problems

hi
i am having problems with my array declarations
import java.io.*;
public class bubbleSort4{
public static void main (String []args) throws IOException{
    BufferedReader input=new BufferedReader (new FileReader("numbers.txt"));
    for (int blah=0; blah<0; blah+=1 ){
    int array1[];
    array1[blah]=Integer.parseInt(input.readLine());
    }//end of for
    input.close();
    bubbleSort4(array1);
}//end of main
public static void bubbleSort4(int[] array1) {
int newLowest = 0;            // index of first comparison
    int newHighest = array1.length-1; // index of last comparison
    while (newLowest < newHighest) {
        int highest = newHighest;
        int lowest = newLowest;
        newLowest = array1.length;    // start higher than any legal index
        for (int i=lowest; i<highest; i++) {
            if (array1[i] > array1[i+1]) {
               // exchange elements
               int temp = array1; array1[i] = array1[i+1]; array1[i+1] = temp;
if (i<newLowest) {
newLowest = i-1;
if (newLowest < 0) {
newLowest = 0;
}//end of if
} else if (i>newHighest) {
newHighest = i+1;
}//end of else if
}//end of if
}//end of for
}//end of while
}//end method bubbleSort4
}//end of class
i get the error where i call the bubbleSort4 method with the array1 in brakets, it says that it doesnt recognize the variable. i know thats because i declared it in the for loop, but when i declare the array outside the for loop, it says that it was not initialized when i use it in the for loop. a vicious cycle. lol. so please, someone help....

int array1[];you must initilize the array1
example :
int [] array1 = null;or
int [] array1 = new int [10];
for (int blah=0; blah<0; blah+=1 ){the codes will never go into the above for loop since
blah always >= 0;

Array index problem in formula node

dear friend
I'm trying to use formula node to solve a problem because I make this program using c at the begining.
It runs perfectly in turbo c, but somehow it doesn't work in the formula node.
I try to debug my source code, and I find that the formula node seems can't read the true value in
the array.
Here is the code in the formula node.
int32 i,j,k;
for ( i = 0 ; i < sopa; i++ )
j = 1;
ep[i][0] = pa[i];
ep[i][1] = np[ep[i][0]][0];
while ( ep[i][j-1] != exit )
  for ( k = 0 ; k < sonp ; k++ )
    if ( np[ep[i][j-1]][k] != -1 && (pc[ep[i][j-1]][ep[i][j]] + pc[ep[i][j]][exit] >= pc[ep[i][j-1]][np[ep[i][j-1]][k]] + pc[np[ep[i][j-1]][k]][exit] ) && (pc[ep[i][j-1]][np[ep[i][j-1]][k]] == org[ep[i][j-1]][np[ep[i][j-1]][k]] ))
      ep[i][j] = np[ep[i][j-1]][k];
  j++;
This is the part that I think the problem might be.
if ( np[ep[i][j-1]][k] != -1 && (pc[ep[i][j-1]][ep[i][j]] + pc[ep[i][j]][exit] >= pc[ep[i][j-1]][np[ep[i][j-1]][k]] + pc[np[ep[i][j-1]][k]][exit] ) && (pc[ep[i][j-1]][np[ep[i][j-1]][k]] == org[ep[i][j-1]][np[ep[i][j-1]][k]] ))
ep[i][j] = np[ep[i][j-1]][k];
I state that "np[ep[i][j-1]][k] != -1" but I do get the value -1 in the array "ep".
Could someone tell me why I get -1 in the array?
I hope I can finally do it all by labview not using formula node,but array like "pc[ep[i][j-1]][np[ep[i][j-1]][k]] "
seems very hard to wire in labview. Could someone give me some good advices of doing this?
Thanks for your help

altenbach 已寫:
normanshi wrote:
ep[i][0] = pa[i];                                          (A)
ep[i][1] = np[ep[i][0]][0];                            (B)
...    if ( np[ep[i][j-1]][k] != -1 && ... )          (C)
      ep[i][j] = np[ep[i][j-1]][k];                       (D)
I state that "np[ep[i][j-1]][k] != -1" but I do get the value -1 in the array "ep".
Could someone tell me why I get -1 in the array?
I hope I can finally do it all by labview not using formula node,but array like "pc[ep[i][j-1]][np[ep[i][j-1]][k]] "
seems very hard to wire in labview. Could someone give me some good advices of doing this?
There are many possible scenarios to get a -1 in the ep output. For example if the -1 gets already written in step (A) or (B) at a certain index, and that index does not get overwritten in step (D). You are indexing all over the place! Is there some bounds checking on the array contents? What are typical inputs and array sizes?
I'm sure about that the -1 doesn't get already written in step (A) or (B) because ep[i][0] and ep[i][1] is fine. What really makes me confuse is that sometimes ep array has the value like this.
That means it does overwritten some value in step (D). The -1 should never be written into it because I have already state that np[ep[i][j-1]][k] != -1. Somehow I still get -1,and this is really strange! I'm indexing all over the place becuase I can't figure out a better way to achieve my requirement.
I think I should briefly tell you what I'm trying to do. In this program,I input some values which means the distance from one point to another. Then I use floyd's all pairs shortest-path algorithm to find all the shortest distance. Finally I want to find out the "shortest path". I mean like from point 4 to point 0,the shortest path might be like 4 -> 2 -> 1 -> 0, and what the formula node part do is trying to find out this "shortest path". Maybe you can give me some better advice of doing this, I have been thinking a better way to do it for about two months. I think I'm really not good at this.
I try to do it all by labview ,but again I get a strange problem. This time the ep[i][j-1] doesn't get the correct value. In the first time i=0 j-1=0 ep[i][j-1] = 1,but the second time i = 0 j-1 = 1 ep[i][j-1] = 0. This makes the "ep[i][j-1]!=exit" get the incorrect boolean value. The ep[i][j-1] should be 2,not 0. I try to use highlight to find if I make any mistake, but I can't one.This is the input and I put the labview program in attached file (temp4.vi).
Could you help me find out why this happened?
Thanks for your help altenbach!
由 normanshi 在 08-19-2006 10:06 PM 上編輯的訊息
Attachments:
temp4.vi ‏191 KB
ep.jpg ‏10 KB
input.jpg ‏9 KB

Control Array Access Problem while loading panel on 2 Tabs

I am using LabWindows CVI 10.0. My intention is to programmatically disable a control array in a panel.
Problem:
I am loading a panel with control array in TabControl pages - Tab0 and Tab1.
Error occurs, While programmatically accessing through below functions.
GetCtrlArrayFromResourceID( Tab0_panel, CTRLARRAY) - Able to get resource ID.
GetCtrlArrayFromResourceID( Tab1_panel, CTRLARRAY) - Not able to get resource ID.
Its giving error as Resource ID not found in UIR.
Error picture i have attached below for reference.
Please give some suggestions.
Solved!
Go to Solution.
Attachments:
Error.PNG ‏7 KB

Ok, if you didn't use it so far you should use it now : If you are accessing controls on a tab panel you have to use the correct panel handle using the function GetPanelHandleFromTabPage, you can not simply use the constant defined in your UIR.
Have a look at the example TabExample.cws for an example of this function.

JRockit 1.4.2 array clone problem

JRockit 1.4.2 throws an IllegalAccessError on array cloning code produced by javac
-target 1.4.2. This seems to be the same problem as Sun's bug #4750641 (fixed
as of 1.4.1_01). JRockit 8.1 works okay. The problem also occurs with code produced
by a current version of IBM's jikes compiler.
To reproduce:
public class a {
public static void main(String[] args) {
new int[10].clone();
When compiled with "javac a.java", it works okay. When compiled with "javac -target
1.4.2 a.java", JRockit throws an IllegalAccessError.

I can confirm this problem. We are working on a fix for the next service
pack. Thanks for the bug-report!
Regards,
/Staffan
Nathan Bronson wrote:
JRockit 1.4.2 throws an IllegalAccessError on array cloning code produced by javac
-target 1.4.2. This seems to be the same problem as Sun's bug #4750641 (fixed
as of 1.4.1_01). JRockit 8.1 works okay. The problem also occurs with code produced
by a current version of IBM's jikes compiler.
To reproduce:
public class a {
public static void main(String[] args) {
new int[10].clone();
When compiled with "javac a.java", it works okay. When compiled with "javac -target
1.4.2 a.java", JRockit throws an IllegalAccessError.

Array Copy Problem

ARRAY COPY DOESN'T WORK. DO NOT ATTEMPT TO USE IT IN YOUR REPLY TO THIS TOPIC. array copy says that you need the same type of object in the arrays. I'm making a method in a class called SUPERARRAYUTIL where this isn't the case. They all extend from a class i made called SUPERARRAY (in javacase caps tho, i just like to use upper case), but that doesnt help me. I'm short on time and i want to post this right now, so i won have any code right away but here is how i'm gonna do it:
1) Static method takes parameters superArray array, superArray newelements, and int start
2) Make a temp array that would be big enough to fit array, and the newelements at postion start in array
3) copy over array using a for loop, starting at 0 in temp.
4) copy over newelements using a for loop, starting at start in temp.
Then i will make non-static methods for superArrayUtil that will use the static methods in superArrayUtil. I will also make a method like System.arraycopy but will call a method called cut to trim the array of new elements and then call this arraycopy to copy it into the dest array, and then another non-static method for that method too.
Basically i just need ideas or comments cause so far i ran into some weird problems or any suggestions if there's a better way to copy arrays in the general way of array1 into array2 at a starting position.

Deo_Favente wrote:
ARRAY COPY DOESN'T WORK.
YES. YES IT DOES. WHY DO YOU THINK THAT IT DOESNT WORK? WHY DON'T YOU POST WHATEVER CODE THAT YOU DO HAVE THAT IS CAUSING YOU PROBLEMS AND THEN MAYBE WE COULD WORK WITH IT. I THINK THAT'S A BETTER IDEA PERSONALLY, AT LEAST OPPOSED TO WHAT YOU DID HERE._+

Beginner : Array , String Problems continue.

Hi everybody I am so New in Java or rather not really able to understand Java yet.
I have assignment where I do not know how to think anymore..is probably very easy to those who understand programming but sadly I do not.
Program should do:
1. assign any amount of different strings.
2. user is giving any letter he/she wants and program to find it among given strings.
If searched letter is in any string/ strings , only these strings or string are printed.
3. If in given strings is not searched letter, program has to say it, for ex: there is not letter you search for.
As long as now I have only, strings assigning to array. So there are strings in array but I do not know how to write code where I can find given letter by user.
I just do not know how I should think(anymore at all ;)) here. I am really frustrated and desperate, how to understand this?? Once and for all!!!
I was thinking maybe I should use ArrayList? but how...or Can it be done both ways with Array or with ArrayList?
     public static void main(String[] args) {
          Scanner scan = new Scanner(System.in);
          System.out.print("How many strings ?");
          int antal= scan.nextInt();
          String [] str = new String[antal];
           String string = null;
          int x;
           scan.nextLine();
             for( x=0;x<str.length;x++){
                  System.out.print("String "+(x+1)+": ");
             string= scan.nextLine();
             str[x]= string;
            System.out.print("Write a letter you wish to find :");
            String letter = scan.nextLine();
            char check = letter.charAt(0);
//somthing in here ....

Thank you very, very much for helping me, this is the first forum where I am getting any answers at all. Thanks guys!
Yes, that is true I have a problem to "see" things in code..I feel " lost in translation " :)...Sometimes I think I understand code and than suddenly code does total different thing than I thought. I have to pass 2 exams of Java basic and bit advance level of Java , all seems very dark now..but I have a hope that I at least pass those exams. Of course it could be fantastic to start understand Java (or any other computer language) and be able to code one day for real. To be honest, I envy you that you can understand Java. When, all code works is so cool and fun! ok, Back to code...
So I read your tips and advices , thanks.
Here is another problem, with help of indexOf(char) I got index for character I searched, fine.
The way i wrote the code I got separate answer for each string(check in code). What I need to have is, separate printed strings where given character is found and nothing else should be printed. Later, I need just one general comment ,only in case if character is NOT found in given strings.
import java.util.*;
public class upp9 {
     public static void main(String[] args) {
          Scanner scan = new Scanner(System.in);
          System.out.print("How many strings ?");
          int antal= scan.nextInt();
          String [] str = new String[antal];
          int x;
           scan.nextLine();
             for( x=0;x<str.length;x++){
                  System.out.print("String "+(x+1)+": ");
             str[x]= scan.nextLine();
            System.out.print("Write a letter you wish to find :");
            String letter = scan.nextLine();
            char check = letter.charAt(0);
               for( x=0;x<str.length;x++){
                   str[x].indexOf(check);
                 //     System.out.println("String "+(x+1)+" "+str[x].indexOf(check));
            if((str[x].indexOf(check))>=0)
                 System.out.println("String "+(x+1)+" "+str[x]);
            else
                 System.out.println("Nothing in this string");
System.out.println();
}is printed.
How many strings ?4
String 1: hello
String 2: other
String 3: alex
String 4: batman
Write a letter you wish to find :a
Nothing in this string
Nothing in this string
String 3 alex
String 4 batmanI should get printed (with other code)...where I don't know how to think here? what code I should use?, what I can what I can not do here...hmmm
//in case found
How many strings ?4
String 1: hello
String 2: other
String 3: alex
String 4: batman
Write a letter you wish to find :a
String 3 alex
String 4 batmanor....
//in case NOT found
How many strings ?4
String 1: hello
String 2: other
String 3: alex
String 4: batman
Write a letter you wish to find : j
Not found

Array position problem

HI everyone I am looking for some help on an array problem.
I am reading in a text file that is in a line by line format eg.
apple
orange
pear
etc
The problem is that I want my array to increment each line. However each time a new line is read from the text file the array postion goes back to zero. Im assuming theres something wrong with my loop. Somebody please help!!!
String line;
String[] words;
int i;
try {
BufferedReader reader = new BufferedReader(new FileReader("wordlist.txt"));
while((line = reader.readLine()) != null){
words = line.split(" ");
for(i = 0; i < words.length; i++){
Arrays.sort(words);
//System.out.println(words);
if(findWord.equals(words[i])) {
Cap = "the word was found at position " + Arrays.binarySearch(words, words[i]);
test=true;
checkString();
reader.close();
I I read in
apple orange pear
carrot cucumber tomato
then apple[0] orange[1] pear[2]
but then this resets to 0 on new line i.e
carrot[0] cucumber[1] tomato[2]

Correct me if Im wrong but I think I have created the
array out side the loop.Your original code declares the array outsid of the loop, but it doesn't create it. It just allocates a reference variable that will point to the aray.
Inside the loop, where you do words = split you're creating a new array each time. (And like I said, if there's only one word on a line, you don't need to spilt.)
As for putting the next
lines word into the array on each loop pass I do not
understand how to do this. Any help would be
appreciated?
for (int ix = 0; ix < numLines; ix++) {
arrar[ix] = the line that you just read
} Of course, if you're using the standard while (line != null) for loop control, then you can just skip the for part and create an index variable that you increment inside the body of the loop.

Array Splice problems...

Hi i am loading in xml into Flash
<question ID="n3.1a" level="3" />
<question ID="n3.2b" level="3" /> ... etc all the way
to n3.12b
So what i am trying to do is to Splice the array into 2 parts
all the questions ID's that are A and all that are B for for
example an array with:
level3a_Array = [n3.1a,n3.2a,n3.3a,n3.4a]
level3b_Array = [n3.1b,n3.2b,n3.3b,n3.4b]
but i am having problems with the code below trying to splice
them, so any help would be great!!!
var diagnosticXml:XML = new XML();
diagnosticXml.ignoreWhite = true;
diagnosticXml.load("databank/databank.xml");
diagnosticXml.onLoad = function(success:Boolean){
if(success){
aLevel = diagnosticXml.firstChild.childNodes;
lev3Array = aLevel[0].childNodes;
for(var a=12; a>0; a--){
var level_3:Number = _root.aLevel[0].childNodes.length;
_root.aLevel[0].childNodes.splice(0, 1);
lev3B_Array = _root.aLevel[0].childNodes.splice(0, 1);
trace("lev3Array: "+ lev3Array);
}

intialize both arrays and then push every other node into
your arrays.

Rebuilding Problem on Zen

Hi!
I bought a 4gb Creative Zen last summer and i had no problem with it before yesterday. I had to travel somewhere else so i upload my files into Imported Files by Media Explorer and during my travel,i wanted to listen to some songs but my Zen got a error and now it's trying to "rebuild";there is a text on its screen says "rebuilding" but it stopped at %5 and there is no process.. I go into Recovery Mode and perform a Clean up but it stops at %8 again. I tried to reload the firmware but nothing changed. I didnt tried to "format all" but is there anything i can do except "format all"?

format >cleanup>reboot it.

Array rebuild problems

Similar Messages

Maybe you are looking for