Array to ColorFrame not accepting data.

I am attempting to interface with a IP-cam and generate an .AVI file from the captured images taken N times per second, however I am having issues with a fundamental step, Capturing the images from my IP-cam is easy, done it for another project. When I take the image however and try to run it through IMAQ Array to colorframe it seems to reject the image data even though it is a 2-D array of U32 Values.
If anyone has any ideas on why this is going on or how to resolve it can you please let me know. Thanks in advance.
P.S. As a sidenote, if anyone knows of any decent free camera access/record programs that can access an http image, let me know and this whole problem may just dissapear.
Solved!
Go to Solution.
Attachments:
Capture Frame.png ‏34 KB
Capture Frame.vi ‏25 KB

What do you mean that it "seems to reject the image data"? Errors?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

BT HELP PAGE NOT ACCEPTING DATE FORMAT

I AM USING THE HELP EMAIL CONTACT OPTION AND THE DATE FORMAT IS BEING REJECTED
I HAVE TRIED THREE TIMES WITH THE SAME RESULT
IS THERE AN ERROR ON THIS PAGE?
CAN IT BE CHECKED PLEASE
THANK YOU
TEXT AS ENTERED
TEST ERROR O4/11/11
CANNOT CARRY OUT SPEEDS AS ERROR MESSAGE
NO FIBRE TO THIS PREMISES ( FTTP) HAVE NOT BEEN FOUND AT THIS ADDRESS
4/11/11 HEALTH CHECK NO WIRELESS SIGNAL DETECTED
CONFLICTING DATA ON TESTING
NOT EXACTLY SURE
TESTED OK 26/10/11 BETA TEST SUCCESSFUL 04/11/11 AFTER WEAK SIGNAL ERROR AS ABOVE
BWEP
Solved!
Go to Solution.

Thank you for this
I have retried and by removing dates from text which inevitably dilutes the data ie dates of the problems
It will only accept the one date in the section When was the problem first noted
The accepted format ws as originally posted ie 04/11/11
BWEP

Not accepting date in selection screen

Hi,
I'm trying to submit rkaep000 with values to order, expected debit date and display variant in the selection screen. I'm able to fill values to order and display variant but not to the date. Why am I not able to pass the dates????? Tried directly passing then passing as range but still it takes the default date.
        submit rkaep000 via selection-screen
               WITH p_tcode = 'KOB2'
               WITH aufnr   in r_aufnr
             WITH r_obdat in r_date
                WITH r_obdat-low EQ '01032003'
                WITH r_obdat-high EQ '01032007'
                WITH p_disvar = 'SCORP 1404'
               to sap-spool spool parameters params
               without spool dynpro
               and return .

if r_obdat is a select option have you also tried:
r_date-low = '20030301'.
r_date-high = '20070301'.
r_date-sign = 'I'.
r_date-option = 'BT'.
append r_date.
submit rkaep000 via selection-screen
WITH p_tcode = 'KOB2'
WITH aufnr in r_aufnr
WITH r_obdat in r_date
WITH p_disvar = 'SCORP 1404'
to sap-spool spool parameters params
without spool dynpro
and return .

How can we find apple password when it can't send email through and will not accept date of birth given before accessing security questions?

how can we find an apple id password when email links aren't working and date of birth is shown as incorrect when entered prior to reaching the security questions?

You are out of luck, then. You cannot track it, Apple cannot help you (btw, this is not Apple here.) You can't set up Find My Phone after the iPad is gone.
Notify the police. Change all your passwords. Buy a new iPad.
Perhaps your insurance will cover the loss for you, so speak with your insurance agent.

Error: Remote host did not accept data file

Went to tiger 10.4.4 and cannot print. Wireless connection to HP photosmart 1215 via SMC 2804 router was working with Gimp print driver - photosmart 1100 (1215 driver never did work). After months of fooling around after Jaguar to Tiger upgrade and similar printer failure, I was finally able to get this option (hp 1100) to work. Now, another update and no printing AGAIN. G5 iMac, other mac - G4 iMac - doesn't work after update either. What is going on??
iMac G5 Mac OS X (10.4.4)

That seems to be an LPD error message, so you could try setting the printer up as either IPP or JetDirect, if the interface supports either one.

In my MacBook Pro, finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see top bar(Apple, Date, Wifi). Even in safari address bar not accepting

In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..

One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton

HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

I have an ipad2 with wifi and 3G. My wife and I are traveling in France (Nice) then into Italy. We are unable to purchase a data plan because our Verizon IPad will not accept a sims chip...we are told. We were advised that this model wound work in Euro

I have an ipad2 with wifi and 3G. My wife and I are traveling in France (Nice) then into Italy. We are unable to purchase a data plan because our Verizon IPad will not accept a sim chip...we are told. An Apple store employee here said this model is good only in the US. The iPads here take a sim card. We were advised by an Apple Store Employee at home that this model would work in Europe and that we could buy our service here. That does not seem to be the case. We have been told that we must invest in a modem at 200.00€ and then purchase a separate service plan for each country. We can use the free wifi wherever it is available but we cannot connect to the outside world when out of range. Is there anything else we can do?
Thanks, John

Unfortunately, no other solution is available.
Hope this helps

My wife's iTunes ID will no longer work. Tried to reset password but did not get email, tried to reset by answering personal questions' but will not accept the correct date of birth. Has it been hacked? How can I fix this?

My wife's iTunes used ID will not work. Tried resetting the password, but email was not received. Tried using personal questions method, but would not accept the correct date of birth, so could not go any further. Has her iTunes ID been hacked? How can I fix this?

Thanks for that advice @randers4.
I linked through and submitted my info as a "topic not covered" in the iCloud section. After entering the serial number of my MBP it turns out I wasn't eligible for technical support (though I don't think this is hardware related support) and the final suggestion was to take my computer into an Apple store. I called my local Apple reseller and asked for assistance. The customer service rep was very nice but unable to help, so suggested I call Apple Support on 1300 321 456. I did so and, again, spoke to two very polite and helpful customer service people (I was transferred to security services). I didn't have to be on hold to speak to either rep for more than a few seconds! After trying a few different things, he worked out what was happening...
So, to cut a long story short, to solve the problem in my OP, all I had to do was log out of iCloud in my System Preferences and log back in using my current Apple ID. [Edited to add that I had to sign out of everything I was currently signed in to with my Apple ID before logging out and in again.]
Problem solved!
Message was edited by: NotBaconBits

I want to play music bought from itunes on my new computer but apple id is old email address no longer accessible and password forgotten. Security information date of birth also not accepted

I want to play music bought from itunes on my new computer but apple id is old email address no longer accessible and password forgotten. Security information date of birth also not accepted. No good apple sending reset information to old email address as I cannot access it

Welcome to the Apple Community.
The following article(s) may help you.
Moving your iTunes library to a new computer

HT201250 I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I

I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I overcome this?
I was already using 10.7. But only had the disc for 10.6.

Sorry I am new to this. Am I in the right area? I am using my iPhone to make contact. I am worried.

When putting in "time/date" of future events, does not accept?

When putting in "time/date" of future events, does not accept?

I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
No

I prefer to arrange my photos by title but when I shut down Iphoto, my photos rearrange by date. This is not acceptable for my growing library of snanned black and white ancestral photos. How do I get photos in events to stay in place ?

I prefer to arrange my photos by title but when I shut down Iphoto, my photos rearrange by date. This is not acceptable for my growing library of snanned black and white ancestral photos. How do I get photos in events to stay in place ?

I actually am illiterate on the use of the finder to to view photos in folders. I guess I will go to a class at the local Apple store for a lesson on the uses of finder .
My method of viewing my photos are through events in I photo.
1. Download from camera or scan in from old photos.
2 I organize photos into events by occasion, or happenings in a certain year, or a group of photos with memorabilia of a certain person from childhood and on. etc.
3. Because Iphoto does not allow rearranging as I was able to do in my old PC with Corell, I drag all of the photos to an " album" on the left side of sceen.
4. I arrange photos in "order" after which I number each photo in sequence. I do this for a few of reasons.
          - if a photo is accidentally deleted I know it. I can usually remedy this by checking my trash or
rescanning.
          - I can sort by title without complications and this holds in "album"
5. The pictures will re arrange automatially to match the album in I photo.
6. This worked great in I-photo 09 but now in mountain lion the pictures in events go back to "
sort by date" and will not hold "sort to Title"each time I photo is closed down. What a nuicance it is to have to go to view and click "title" again and again every time Iphoto is opened.
7. Can I go back to Photo 09? .

In Query mode, date items does not accepts more than 10 characters..Why?

Dear All,
In my form, While querying my date items, it does not accepts more than 10 Characters. Could it be changeable.
Actually i want to search like greater than specified date( >01/01/2007 ).
But i can specify like >01/01/07. After tabbing out from that item, it displays like >01/01/200.
How to overcome this issue.
Please help.
Regards,
Balaji

You are absoletely correct Francois!
Previously i have made a mistake that both of my maximum length and query length property to 20. That time it was not worked. Now i changed my maximum length to the old one like 11 and i changed only the query length to 20.
Now it is working. I understood the concept wrongly.
Thanks Francois!

HT1918 I updated my payment method because I changed my Internet MasterCard of the same number but new expiry date but not accepted , can you help me

Please I need help regarding this problem I faced today.
I updated my payment method because I changed my Internet MasterCard of the same number but new expiry date but not accepted , can you help me?

Is the iPhone jailbroken or was jailbroken?. In the article " http://support.apple.com/kb/TS3694 " it says:
Errors related to downgrading iOS
The required resource can't be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it's newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version isn't supported.
Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

Array to ColorFrame not accepting data.

Similar Messages

Maybe you are looking for