Arrêt inopiné du servomoteu​r lors de la commande
Bonjour,
Dans le cadre d'un projet visant à créer l'interphase LabVIEW d'un robot 2 axes, j'ai un soucis concernant l'axes X.
Celui-ci s'arrête régulièrement, lorsque je lui impose un mouvement grace au VI "Start Motion", avant de repartir avec une vitesse trapézoïdale, tant dis que je récupère, avec le VI "Read Position", une incrémentation régulière de la position comme si le servomoteur ne s'était pas arrêté. Ceci entraine alors une erreur de postion de plusieurs centimètres ne me permettant plus d'asservir la position sur cette axe.
J'ai réalisé strictement la même programmation sur l'autre axe et il n'y a aucun problème de positionnement. Je boucle avec une structure "Rendez-vous" en prenant à chaque boucle la valeur de position à partir d'un tableau.
J'ai joint une capture de la séquence pour être plus parlant.
Avez-vous une idée d'où le problème pourrais venir?
C'est la première fois que j'utilise les outils Motion.
Mon matériel est:
- Servomoteur Kollmorgen de référence AKM42E-ANCNC-00
- AKD Drivers Kollmorgen de référence AKD-P00306-N2AN-0000
- NI UMI 7772
Pièces jointes :
controle axes.PNG 43 KB
Bonjour,
Quelle carte Motion utilisez-vous pour votre projet ?
Je vous recommande de vous baser sur les exemples disponibles depuis la recherche d'exemples de LabVIEW.
J'ai trouvé également ces différents liens qui je l'espère vous aideront à progresser :
NI Motion Control Setup and Support
Using Two Motion Boards in Parallel
Two Axes Move with One Axis Moving Continuously (Conveyor Belt)
N'hésitez pas à utiliser le mode animation également pour voir quelle action déclenche l'arrêt non désiré.
Cordialement,
Jérémy C.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France
Similar Messages
-
Bonjour, la musique de mon iPhone 4s s'arrête inopinément depuis hier.
Bonjour,
Depuis hier et sans prévenir, la musqiue de mon iPhone 4s s'arrête inopinément en pleine lecture (avec écouteurs). Je ne sais pas d'où vient le probléme, j'ai testé avec d'autres écouteurs et le problême persiste..
Avez-vous une idée d'où cela pourrait provenir et des solutions à me proposer (plus de garentie malhereusement).
Par avance merci à tous,No idea but try standard troubleshooting
Reset
http://support.apple.com/kb/HT1430
and if that does not improve the sound a restore
http://support.apple.com/kb/HT4137 -
Problème lors de la commande d'un multiplexeur à partir d'une liaison série
bonjour ,
mon problème est le suivant : lorsque j'ai écris 2 fois sur le bus série donc deux fichiers Write et j'ai mis un seul fichier read la machine me renvoie seulement l'état de la première commande qui était écrit dans le premier fichier Write,
alors qu'elle est censée renvoyer les deux états en même temps , je m'explique :
j'ai écris dans le premier fichier Write M01C01 et dans le deuxième M02C01 , je n'ai récupéré que la deuxième c'est à dire M02C01 ,alors que je devrait recevoir en sortie M01C01 M02C01.
Si vous auriez besoin d'informations complémentaires, n'hésitez pas !Bonjour,
Merci d'avoir posté votre question sur les forums de National Instruments.
Si je comprends bien le problème que vous exposez, vous rencontrez un comportement étrange lors de l'écriture sur votre port série de trames d'information.
En effet, vous ne récupérez qu'une partie des informations que vous envoyez.
Ai-je bien compris le problème ?
Si tel est le cas, êtes vous sûr du paramétrage de votre lecture ? J'entends par là, avez vous vérifié le nombre de bits que vous venez lire sur votre port série ? Il est possible que le mesage lu soit tronqué.
Lors de votre écriture, comme procédez vous ?
Etes vous sur que votre buffer n'est pas réécrit à chaque fois que vous envoyez une trame ? Cela pourrait expliquer le comportement en sortie.
Le plus simple serait sans doute que vous postiez votre VI en pièce jointe à ce forum. Je pourrais ainsi vérifier que votre code fonctionne bien comme vous l'attendez.
Je vous remercie par avance pour vos réponses.
Bien cordialement,
Guillaume H.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> NIDays 2011, le mardi 8 février au CNIT de Paris La Défense -
Probleme de collection iphoto et apple store
je ne peux passer la commande a apple store car il marque un message lors de la commande mon ordi
**Une erreur est survenue lors de la communication avec l’Apple Store en ligne. Veuillez réessayer.***
Merci pour l'aideBonjour,
as-tu réussi à résoudre ton problème ?
Si oui, comment as-tu fait ?
D'avance merci
Nicolas -
Mon macbook 2008 ne démarre plus
Bonjour,
aujourd'hui, impossible de démarré mon macbook blanc de 2008. Il affiche un écran blanc et au tentatives de commandes (cmd+c /cmd+s :etc ...), l'ecran reste blanc puis au bout de quelques minutes, il affiche un dossier avec un point d'interrogation (?) qui clignote . De plus , lors de la commande alt au démarrage, rien ne s'affiche après avoir entré le mot de passe .
J'aimerais savoir si il est possible de le réparer sans faire appelle a un spécialiste si oui , comment ? Et si non combien cela pourrais couter ?
Merci de me répondre au plus vite .
William LANDRAINBonjour,
Once the problem is solved, update your MacBook to 10.7.5 via this update.
http://support.apple.com/kb/dl1582 -
Lightroom 6 update sans connexion
Bonsoir,
J'ai acheté Lightroom 6 update mais je ne peux l'utiliser sans connexion à Adobe.
Rien n'est spécifié lors de la commande c'est un update de Lightroom 5 et non une version CC.
Merci pour votre aide.
J'ai essayé de contacté le support Adobe mais Lightroon n'a pas de support technique.Hi Ned,
I assume this is just a general suggestion on your end rather than a known fix?
As I mentioned, this error appears consistently across various browsers and yes, of course I've tried the cookies and I'm logged in (though I'm not sure how this would affect header size?).
Still getting the same error... -
Problème arrêt programme acquisition USB6009
Je me permets de vous contacter pour un problème de programme sur lequel je bute depuis une semaine. Vous trouverez en fichier le programme sous labView 2009.
Pour résumé, ce programme fait l'acquisition de trois tensions analogiques et une entrée numérique DIO0 via un boitier USB6009 et la programmation d'une tension analogique sur la voie AO0.
J'ai une première boucle de lecture des valeurs qui s'opère toute les 500ms
J'ai une structure évenement "Start Process" qui me permet de tracer un graphique X,Y avec X le temps en cours et Y une valeur analogique
Mon problème principal est le suivant:
Lorsque le programme "Process" se termine, la seule boucle qui continue à tourner est la boucle d'acquisition des tensions et d'affichage des tensions analogiques sur des indicateurs en face avant.
Lorsque je clique alors sur le bouton "Cancel", j'obtiens un sablier sur le PC et je n'ai plus la main sur le PC même en fermant LabView, je dois rebooter!! je n'arrive pas à voir et à isoler le problème même en phase animation de l'execution ( ampoule)? ou alors l'erreur est tellement grosse que je ne la vois pas!!
Pouvez vous m'aider car je commence à m'arracher les cheveux
Autre petit détail, moins important celui-là, je n'arrive pas à trouver la procédure pour effacer un graphique afin qu'il n'y en ait qu'un seul de visible sur le graphe?
En vous remerciant d'avance
Pièces jointes :
MonProjet.ZIP 185 KBPremière chose, quand tu remets ton booléen à la fin du programme c'est mieux de le faire en début de programme, au cas ou tu ai un problème lors d'une éxécution, sinon tu as un bug aussi à l'exécution suivante.
Pourquoi n'utiliserais tu pas une occurence pour synchroniser tes boucles?
Sinon d'un point d evue graphique tu pourrais améliorer ton programme afin qu'il soit plus facile à maintenir (commentaires, sous VI, label sur les cables, merger les erreurs, j'aurais aussi récupéré le status des erreurs pour la condition d'arrêt avec un ou pour s'ajouiter à ton bouton stop)
Rodéric L
Certified LabVIEW Architect -
bonjour, lors de la configuration de mon airport extreme, "une erreur inattendue s'est produite" pourriez-vous me dire d'où peut provenir cette erreur
Bonjour,
Merci pour votre réponse, je n'avais pas trouvé le premier lien sur le site de NI qui me semble correspondre à mon problème.
>> Why do I receive Error -200245 with my X Series Card?
Nous n'utilisons pas d'horloge externe donc j'aurais tendance à croire que l'erreur vient de cette remarque : Signal generation: The reference clock signal should be active before calling starting any DAQmx task that will attempt to use the reference clock. Ensure that your reference clock source is generating the clock prior to DAQmx Start Task being called.
Si je comprends bien, il semblerait que ce soit du à une erreur de synchronisation de l'horloge PLL. C'est à dire que quand on lance l'acqui, il y a une horloge qui est créée pour synchroniser les cartes d'acqui, et pour cela, elle utilise l'horloge du fond de panier du châssis PXI. (on n'utilise pas d'horloge externe). Cette horloge référence est créée à chaque fois qu'on lance la génération et est libérée à chaque arrêt. Il semblerait qu'on lance la tache avant que l'horloge soit prête.
Il est possible que ce soit dû au fait que l'on va trop rapidement entre arrêter une séquence et lancer la suivante.
Je vais voir si il y a des astuces de prog pour interdire le lancement du DAQmx Start Task tant que le PLL n'est pas prêt, peut etre avez vous des infos à ce niveau? Validez vous mes hypothèses précédentes?
Merci beaucoup pour votre aide. -
Bonjour
J'ai developpé un programme sous LabVIEW 8.5, avec une boucle architecture productrice consomatrice. Dans ma boucle productrice je récuprère des données (provenant d'une cartre NI 6210), puis je traite les données dans la boucle consomatrice.
Le traitement consiste en gros à:
- détecter une surtension
- choisir certaines données
- enregistrer les données sur le PC.
Pour passer de la boucle productrice à la boucle consomatrice j'utilise une file d'attente et un buffer (voir les pièces jointes).
Je souhaite arrêter uniquement la boucle consommatrice en gardant le fonctionnement de la boucle prouctrice. L'arrèt est provoqué par un bit d'un autre programme. Par contre je ne souhaite pas garder les données en file d'attente lors de cet arrèt. Avez-vous des idées ou une solution pour résoudre mon problème?
Merci à tous
Damien
Pièces jointes :
producteur consommateur.JPG 26 KB
Boucle Conso Traitement.JPG 511 KBBonjour
J'ai essayé de changer le time out mais je n'arrive toujours pas à arrèter la boucle consommatrice.
J'arrive à arrèter la boucle poductrice mais pas la deuxième. Je vais donc vous envoyer mon projet peut etre que cela sera plus facile pour comprendre (je suis désolé mais je suis plutot débutant en labview alors mon programme est un peu dur à lire...)
Lancement du projet:
1. lancer "ENREGISTREUR DE DEFAUTS.lvproj"
2. lancer "Acquisition de données 14 voies 8cas 4.vi"
3. un fois "Acquisition de données 14 voies 8cas 4.vi" démarré, "Lecture tableau + envoie variables partagées 4.vi" doit se lancer automatiquement
Explication des programme
1. "Acquisition de données 14 voies 8cas 4.vi" réalise l'acquisition de 14 tensions (les tension proviennent d'une carte NI6210). Ces tension sont ensuite traitées de la façon suivante:
- controle de dépassement de seuil sur les 9 première tensions. Si nous avons un dépassement
- on enregistre 250ms avant le dépassement de seuil et 350 ms après le dépassement
- les données enregistées (14 tensions) sont stockées dans des fichiers .txt
2 A partir de ce moment le deuxième programme rentre en jeux ("Lecture tableau + envoie variables partagées 4.vi"). Ce programme lit les fichiers .txt vus précédement et met les données à disposition du serveur "Variable.Engine". Cela me permet de récupérer les données avec un client OPC.
Le problème de mon application est que je voudrais arrèter les boucles consommatrice et productice de mon premier programme le temps quelle soient traitées par le client OPC.
En gros je voudrais arrèter mon programme lorsque j'ai une surtension et que mes fichiers .txt sont utilisables (que j'ai enregistré 600ms 250ms +350ms, et redémarrer mon programme sur un ordre du client OPC.
J'éspère avoir été assez clair et que quelqu'un pourra m'aider
Merci
Damien
Pièces jointes :
Enregistreur de défauts.7z 1190 KB -
Exécuter une partie du programme une seul fois lors du premier lancement
Bonjour un tous!
Dans le cadre d'un stage, je suis amené à gérer un spectrophotomètre avec Labview.
J'aimerais qu'une partie de mon programme ne s'exécute que lors de la première exécution du programme.
En fait, je désire que lors de la première exécution, le spectro fasse un auto-zéro et que ensuite il fasse ses mesures normalement.
J'ai testé avec l'outil "premier appel" et une boucle condition mais cela ne fonctionne pas. Quand le programme tourne en boucle, il concidère à chaque fois que c'est la première exécution. Je suppose donc que j'ai mal compris cette fonction.
Je cherche donc un moyen d'arriver à mes fins.
Voivi le programme (Labview 2011)
Résolu !
Accéder à la solution.
Pièces jointes :
Mesure spectro.vi 32 KBBonjour,
J'imagine que pour exécuter votre code en continu, vous cliquez sur la double flèche d'exécution qui lance l'exécution du VI en continu. L'utilisation de cette méthode d'exécution revient à lancer le VI à la suite manuellement, autrement dit, le VI s'arrête et se relance entre chaque exécution.
Il ne faut utiliser cette flèche qu'a des fin de débugage de votre application, par pour lancer une application en continue.
Dans votre cas, la fonction premier appel renvoi toujours vrai, car le VI est arrêté et relancé donc, oui, c'est toujours un premier appel. Il faut rajouter une boucle while (ou tant que dans votre code pour exécuter en continue la mesure une fois l'initialisation terminée.
Si joint votre VI modifié. C'est une modification très rapide et pas forcément optimisée, mais pour illustré le principe. Ca devrait tout de même mieux fonctionner pour votre application.
On configure la ressource, on fait l'initialisation, puis on fait la mesure en continue jusqu'à un appui sur stop.
J'ai placé l'enregistrement dans la boucle, la encore, je ne sais pas si c'est ce que vous souhaitez vraiment faire. Le but était de vous montrer comment utiliser la boucle while.
Cordialement
.mesLeft{float:left} .mesInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898} .mesLogo{float:right;opacity:0.18} .mesLogo:hover{opacity:0.9}
Maxime R.
CLD - Certified LabVIEW Developer / Développeur LabVIEW Certifié
CLAD - Certified LabVIEW Associate Developer
Pièces jointes :
Mesure spectro 2.vi 20 KB -
Initialisa​tion / arrêt du contrôleur Motion
Bonjour,
Je possède une carte motion control PXI-7342 et une UMI-7772.
Au lancement de mon exécutable, le défaut 70012 (par exemple) apparait régulièrement. Je souhaiterais savoir comment il faut :
initialiser correctement le contrôleur Motion lors du lancement de l'exécutable (doit on et comment utilise t on "start motion.flx" ou "Clear Power up Status.flx" ou "Reset Motion controller.vi" ou "Initialize Controller.flx" ... ?)
arrêter correctement le contrôleur lorsque l'on quitte l'exécutable (doit on et comment utilise t on "stop motion.flx" ou "Enable Shutdown" ... ?)
Concernant le défaut 70012 j'ai vu dans une documentation NI que pour corriger le problème (sous Labview 7.1) il fallait lors de la création d'un exécutable, (fonction "Build Application or Shared Library") décocher la case "Disconnect type definitions and remove unused polymorphic VI instances" de l'onglet "Application Settings". Quelqu'un a t il vérifié cette solution ?
Merci pour vos réponses.
Guillaume qui galère.Rebonjour,
J'ai effectué d'autres recherches sur cette erreur, avez vous un firewall d'activé sur votre PC car il est possible que le driver motion bloque le driver Motion.
Voici un autre document qui fait référence à cette erreur:
http://digital.ni.com/public.nsf/allkb/DB2525CA0DC5FCDE862571FC0073DA99?OpenDocument
Veuillez me tenir informé si vous êtes dans ce cas. -
Bonjour voilà mon problème
J'ai pris un abonnement Meetic France de 5€99 par semaine avec mon 1er id Apple dont je ne me souvient plus et
Je n'est plus accee a l abonnement mais mon compte continu d'être prélevé
Et je ne sais pas comment arrêtée cet abonnement. Aidés moi a arrêté sil vous plais, de préférence les remonte en français, je ne parle ni ne comprend pas englais. Merci d'avance.Zazzz wrote:
Is it possible to not lose its data during a restore?? If so, how?? Is ICloud does the work??
Y a-t'il une façon de ne pas perdre ses données lors d'une restauration?? Si oui comment?? Est-ce que ICloud fait le travail??
Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Connectez-vous via le câble à l'ordinateur que vous utilisez pour la synchronisation. A partir d'iTunes, sélectionnez l'iPad / iPod, puis sélectionnez l'onglet Résumé. Suivre les indications pour la restauration et assurez-vous de dire «oui» à la sauvegarde. Vous serez averti que toutes les données (applications, musique, films, etc) seront effacées, mais, comme les finitions de restauration, il vous sera demandé si vous souhaitez le contenu de la sauvegarde à copier à l'iPad / iPod. Encore une fois, dire «oui».
Sorry for my French. I'm an American!
Désolé pour mon français. Je suis un Américain! -
Demande d'aide... Fermer Bridge lors du telechargement.
Bonjour,
Lors du téléchargement de Photoshop CC ou de Bridge (Je suis sous Windows 7), un message me demande de fermer ''Brige.exe'' Tout est fermé ! Que dois-faire ? J'ai chargé Lightroom 5 sans problème.
Merci à vousBonjour, vous avez du cocher le démarrage auto de Bridge avec la session. Il faut donc l'arréter.
http://help.adobe.com/fr_FR/creativesuite/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-736 da.html#WSBB3EA68F-F296-423c-9490-74255DE4ADD1
Si vous parlez anglais: http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html
sinon, pour vous amuser, en traduction auto: http://translate.google.com/translate?hl=en&sl=en&tl=fr&u=http%3A%2F%2Fhelpx.adobe.com%2Fc reative-suite%2Fkb%2Ferror-installation-cannot-continue-bridge.html
et plutôt que "Désélectionner Pont Démarrer à Connexion." l'option à décocher doit être quelque chose comme "Lancer Bridge à la Connexion" -
Issues with mobility and autodiscovery with Lync 2013 and IIS/ARR
Hi all,
this is my last resort after days and days searching a solution for this problem... unsuccessfully.
All works fine unless the autodiscovery service with external users and the mobility service for both internal and external ones.
I deployed a Standard Edition Lync Server 2013 with:
a consolidated Frontend server in LAN
an Archiving and Monitoring server in LAN
an Edge server in DMZ with 2 NICs (one in DMZ network and one in LAN)
a IIS/ARR 2.5 reverse proxy in DMZ with 2 NICs (one in DMZ network and one in LAN)
All these roles are on Windows Server 2012 R2.
No split-DNS is deployed since I have different domains for internal and external. In any case I used the pinpoint DNS tip to resolve some records internally (I followed this guide http://tsoorad.blogspot.ch/2012/10/lync-server-dns-pinpoint-zones.html)
Here DNS records into internal domain:
A-record for meet.domain-ext.com points to Frontend server local IP
A-record for dialin.domain-ext.com points to Frontend server local IP
A-record for lyncdiscoverinternal.domain-ext.com points to Frontend server IP
A-record for lyncwebexternal.domain-ext.com points to Frontend sever local IP
A-record for autodiscover.domain-ext.com points to Exchange server local IP
Here DNS records into external domain:
CNAME-record for lyncdiscover.domain-ext.com points to lyncwebexternal.domain-ext.com
CNAME-record for sipexternal.domain-ext.com points to lyncwebexternal.domain-ext.com
A-record for meet.domain-ext.com points to Reverse Proxy public IP
A-record for dialin.domain-ext.com points to Reverse Proxy public IP
A-record for lyncwebexternal.domain-ext.com points to Reverse Proxy public IP
I installed and configured IIS/ARR 2.5 with KB2732764 and KB2785586 on Reverse Proxy following the NextHop guide. The local IP address of external NIC on Reverse Proxy is NATTED by a Cisco ASA firewall with public IP address and only 80/443
ports are permitted.
The problems occurs when I try to connect whit my Lync 2013 APP on iPad using autodiscovery service, both internally and externally. After some seconds the APP shows the message “Cannot connect to the server because it could be busy or
temporarily unavailable. Retry.” When I used the IIS/ARR 3.0 the problem looked like an authentication issue, then I came back to ISS/ARR 2.5 version with its KB. Now I cannot understand what is the cause about logfail.
The same behavior occurs with Android Lync 2013 APP and Windows Phone 8 APP.
Moreover my Lync 2013 client on Windows 7 can connect internally with autodiscovery settings but it cannot do it externally.
I'm a bit confused because I cannot understand if the problem is about external webservice of Frontend server or about Reverse Proxy configuration or about Lync Control Panel configuration.
Here is an extracted of iPad Lync 2013 log (sorry if it’s a bit long).
Any helps are very appreciated, thansk a lot!
</SentRequest>
2013-12-20
11:33:00.781 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl
called with url = http://lyncdiscover.domain-ext.com/, hopCount = 0, maxHops =
10
2013-12-20
11:33:00.781 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x11cbe40 for url -
https://lyncdiscover.domain-ext.com/ with persistent id as 6
2013-12-20
11:33:00.782 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2013-12-20
11:33:00.782 Lync[563:6d00000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected].
Sending over direct connection.
2013-12-20
11:33:00.782 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/385:Submitting new req.
UrlTrustResolver(0x1201358)
2013-12-20
11:33:00.782 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1783:Successfully started the GetUserUrlOperation
request for http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
2013-12-20
11:33:00.796 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request(UcwaAutoDiscoveryRequest) to Request Processor
2013-12-20
11:33:00.796 Lync[563:6d00000] WARNING TRANSPORT
CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
NULL credential for serviceId (4) type (1)!
2013-12-20
11:33:00.797 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/631:<SentRequest>
GET
http://lyncdiscover.domain-ext.com/
Request Id:
0x1201358
HttpHeader:Accept
application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2013-12-20
11:33:00.797 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x12028f0 for url -
http://lyncdiscover.domain-ext.com/ with persistent id as 7
2013-12-20
11:33:00.798 Lync[563:6d00000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url http://lyncdiscover.domain-ext.com/. Sending over direct connection.
2013-12-20
11:33:00.798 Lync[563:6d00000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not
setting TLS as the url(http://lyncdiscover.domain-ext.com/) is not https
2013-12-20
11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.813 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:00.813 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:33:04.104 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/577:Received
kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable =
true responseHeadersHandle = 12c5d70
2013-12-20
11:33:04.105 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/628:Response
status = 200 for request UcwaAutoDiscoveryRequest
2013-12-20
11:33:04.105 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x12028f0 for release.
2013-12-20
11:33:04.105 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/173:Received response of
request(UcwaAutoDiscoveryRequest) with status = 0x0
2013-12-20
11:33:04.106 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/925:<ReceivedResponse>
GET
http://lyncdiscover.domain-ext.com/
Request Id:
0x1201358
HttpHeader:Cache-Control
no-cache
HttpHeader:Content-Length
1076
HttpHeader:Content-Type
application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date
Fri, 20 Dec 2013 10:33:02 GMT
HttpHeader:Expires
-1
HttpHeader:Pragma
no-cache
HttpHeader:Server
Microsoft-IIS/8.5
HttpHeader:StatusCode
200
HttpHeader:X-AspNet-Version
4.0.30319
HttpHeader:X-Content-Type-Options
nosniff
HttpHeader:X-MS-Server-Fqdn
frontend-lync.domain-int.com
HttpHeader:X-Powered-By
ASP.NET, ARR/2.5
Ôªø<?xml
version="1.0" encoding="utf-8"?><AutodiscoverResponse
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
AccessLocation="Internal"><Root><Link
token="Domain" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=domain-ext.com"
/><Link token="User" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=domain-ext.com"
/><Link token="Self" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=domain-ext.com"
/><Link token="OAuth" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=domain-ext.com"
/><Link token="External/XFrame"
href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/><Link token="Internal/XFrame" href="https://frontend-lync.domain-int.com/Autodiscover/XFrame/XFrame.html"
/><Link token="XFrame" href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/></Root></AutodiscoverResponse>
</ReceivedResponse>
2013-12-20
11:33:04.108 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/112:location value is internal
2013-12-20
11:33:04.108 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/195:User url is https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.109 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/266:Sending event to main thread for
request(0x1201358)
2013-12-20
11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-20
11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with
url = http://lyncdiscover.domain-ext.com/, Hops = 1, status = S_OK (S0-0-0)
2013-12-20
11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/725:Response received for req.
UrlTrustResolver(0x1201358): S_OK (S0-0-0) (Success); Done with req.; Stopping
resend timer
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/393:CUcwaAutoDiscoverGetUserUrlOperation::onEvent
received. Status = S_OK (S0-0-0), url =
http://lyncdiscover.domain-ext.com/
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/449:Received a root response
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/456:Running trust check on user url.
url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with
url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com,
maxHops = 1
2013-12-20
11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl
called with url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user,
hopCount = 0, maxHops = 1
2013-12-20
11:33:04.111 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2013-12-20
11:33:04.111 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/385:Submitting new req.
UrlTrustResolver(0x11d4d38)
2013-12-20
11:33:04.111 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request(UcwaAutoDiscoveryRequest) to Request Processor
2013-12-20
11:33:04.111 Lync[563:6d00000] WARNING TRANSPORT
CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
NULL credential for serviceId (4) type (1)!
2013-12-20
11:33:04.112 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/631:<SentRequest>
GET
https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
Request Id:
0x11d4d38
HttpHeader:Accept
application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2013-12-20
11:33:04.112 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x125fa90 for url - https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
with persistent id as 7
2013-12-20
11:33:04.112 Lync[563:6d00000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user.
Sending over direct connection.
2013-12-20
11:33:04.113 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x12028f0.
2013-12-20
11:33:04.261 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/577:Received
kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable =
true responseHeadersHandle = 11cfbd0
2013-12-20
11:33:04.262 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/628:Response
status = 200 for request UcwaAutoDiscoveryRequest
2013-12-20
11:33:04.262 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x11cbe40 for release.
2013-12-20
11:33:04.263 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/173:Received response of
request(UcwaAutoDiscoveryRequest) with status = 0x0
2013-12-20
11:33:04.263 Lync[563:6d00000] INFO TRANSPORT
TransportUtilityFunctions.cpp/925:<ReceivedResponse>
GET
https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
Request Id:
0x12450d8
HttpHeader:Cache-Control
no-cache
HttpHeader:Content-Length
1076
HttpHeader:Content-Type
application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date
Fri, 20 Dec 2013 10:33:02 GMT
HttpHeader:Expires
-1
HttpHeader:Pragma
no-cache
HttpHeader:Server
Microsoft-IIS/8.5
HttpHeader:StatusCode
200
HttpHeader:X-AspNet-Version
4.0.30319
HttpHeader:X-Content-Type-Options
nosniff
HttpHeader:X-MS-Server-Fqdn
frontend-lync.domain-int.com
HttpHeader:X-Powered-By
ASP.NET, ARR/2.5
Ôªø<?xml
version="1.0" encoding="utf-8"?><AutodiscoverResponse
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
AccessLocation="Internal"><Root><Link
token="Domain" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=domain-ext.com"
/><Link token="User" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=domain-ext.com"
/><Link token="Self" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=domain-ext.com"
/><Link token="OAuth" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=domain-ext.com"
/><Link token="External/XFrame"
href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/><Link token="Internal/XFrame" href="https://frontend-lync.domain-int.com/Autodiscover/XFrame/XFrame.html"
/><Link token="XFrame" href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
/></Root></AutodiscoverResponse>
</ReceivedResponse>
2013-12-20
11:33:04.264 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/112:location value is internal
2013-12-20
11:33:04.265 Lync[563:6d00000] INFO TRANSPORT
CUcwaAutoDiscoveryResponse.cpp/195:User url is https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.265 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/266:Sending event to main thread for
request(0x12450d8)
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req.
completed, Stopping timer.
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/290:Received a root response
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation
completed with url = https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected],
userUrl = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com,
status = S_OK (S0-0-0)
2013-12-20
11:33:04.266 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/725:Response received for req.
GET-UnAuthenticatedGet(0x12450d8): S_OK (S0-0-0) (Success); Done with req.; Stopping
resend timer
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/399:Cancelling all requests
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/409:Cancelling request: 0x11d4d38
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO TRANSPORT CSessionBase.hxx/158:Cancelling
request: 0x11d4d38
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/163:Added
Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with
url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user,
Hops = 1, status = W_Cancelled (W0-0-6)
2013-12-20
11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation
completed with url = http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected],
userUrl = , status = W_Cancelled (W0-0-6)
2013-12-20
11:33:04.268 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request(UcwaAutoDiscoveryRequest) to Request Processor
2013-12-20
11:33:04.268 Lync[563:3a71018c] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential
for serviceId(1) returning: credType (1) signInName ([email protected])
domain () username (mattia.spagnoli) password.empty() (0) certificate.isValid()
(0) privateKey.empty() (1) compatibleServiceIds(1)
2013-12-20
11:33:04.268 Lync[563:3a71018c] INFO TRANSPORT
CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for
url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT CMetaDataManager.cpp/467:Sending
Unauthenticated get to get the web-ticket url
2013-12-20
11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
Request() to Request Processor queue
2013-12-20
11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT
CAuthenticationResolver.cpp/109:Waiting on Meta Data from https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.269 Lync[563:62d4000] INFO TRANSPORT CTransportThread.cpp/343:Sent
Request() to Request Processor
2013-12-20
11:33:04.270 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/385:Submitting new req.
GET-AuthenticatedUserGetRequest(0x1201ab8)
2013-12-20
11:33:04.270 Lync[563:62d4000] WARNING TRANSPORT
CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
NULL credential for serviceId (4) type (1)!
2013-12-20
11:33:04.270 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1189:Submitting Authenticated AutoDiscovery
request to https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:33:04.270 Lync[563:6d00000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x125fa90 for release.
2013-12-20
11:33:04.271 Lync[563:62d4000] INFO TRANSPORT
TransportUtilityFunctions.cpp/631:<SentRequest>
GET
https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
Request Id:
0x1206198
HttpHeader:Accept
HttpHeader:X-MS-WebTicket
xxxxxxxxxx
</SentRequest>
2013-12-20
11:33:04.271 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1662:Ignoring GetUserUrlOperation event as
current state is 6
2013-12-20
11:33:04.271 Lync[563:62d4000] INFO UTILITIES
CHttpStreamPool.cpp/409:Allocating stream 0x11c0a40 for url - https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
with persistent id as 15
2013-12-20
11:33:04.271 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1664:Request
url was http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
2013-12-20
11:33:04.272 Lync[563:62d4000] VERBOSE TRANSPORT
CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com.
Sending over direct connection.
2013-12-20
11:33:20.621 Lync[563:3a71018c] INFO UTILITIES
CNetworkMonitor.cpp/217:Reachabilility Flags IsWWAN(0):Reachable(0):TransientConnection(0):ConnectionRequired(0):ConnectionOnTraffic(0):InterventionRequired(0):ConnectionOnDemand(0):IsLocalAddress(0):IsDirect(0)
2013-12-20
11:33:20.623 Lync[563:3a71018c] INFO UTILITIES CNetworkMonitor.cpp/186:Updated
networkAvailableToConnect(CellularDataNetwork) -> NoNetwork,
isInAirplaneMode(0) -> 1
2013-12-20
11:33:20.623 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/4091:CUcmpConversationsManager::canDoVideoBasedOnNetworkAndPolicy
returns false because RequestWiFiForAudio or RequestWifiForVideo is true and
current network : is not WiFi
2013-12-20
11:33:20.623 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/1672:CUcmpConversationsManager::queryCapability
on StartP2PVideoCall returns false because
canDoVideoBasedOnNetworkAndPolicy
returned false
2013-12-20
11:33:20.904 Lync[563:3a71018c] INFO UTILITIES
CNetworkMonitor.cpp/217:Reachabilility Flags
IsWWAN(1):Reachable(1):TransientConnection(1):ConnectionRequired(0):ConnectionOnTraffic(0):InterventionRequired(0):ConnectionOnDemand(0):IsLocalAddress(1):IsDirect(0)
2013-12-20
11:33:20.905 Lync[563:3a71018c] INFO UTILITIES CNetworkMonitor.cpp/186:Updated
networkAvailableToConnect(NoNetwork) -> CellularDataNetwork,
isInAirplaneMode(1) -> 0
2013-12-20
11:33:20.905 Lync[563:3a71018c] INFO TRANSPORT CEventChannelManager.cpp/826:Received
network monitor event so restarting event channel.
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO TRANSPORT
CEventChannelManager.cpp/520:Moving the event channel aggressive mode.
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/4091:CUcmpConversationsManager::canDoVideoBasedOnNetworkAndPolicy
returns false because RequestWiFiForAudio or RequestWifiForVideo is true and
current network : is not WiFi
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
CUcmpConversationsManager.cpp/1672:CUcmpConversationsManager::queryCapability
on StartP2PVideoCall returns false because
canDoVideoBasedOnNetworkAndPolicy
returned false
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2070:adIsEnabled
= 1, sipUri = sip:[email protected], m_internalADUrlInput =
m_externalADUrlInput =
2013-12-20
11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/255:Discovery is in progress and process state is
6Ignoring request to start network discovery
2013-12-20
11:34:04.274 Lync[563:62d4000] INFO UTILITIES
CHttpStreamPool.cpp/455:Scheduling stream 0x11c0a40 for release.
2013-12-20
11:34:04.275 Lync[563:62d4000] ERROR UTILITIES CHttpConnection.cpp/517:Connection
timedout for request (0x%u0x12d1ea0) - notifying error E_ConnectionTimeoutError
2013-12-20
11:34:04.275 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/173:Received response of request() with status =
0x22020005
2013-12-20
11:34:04.276 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/201:Request
resulted in E_ConnectionTimeoutError (E2-2-5). The retry counter is: 0
2013-12-20
11:34:04.276 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/266:Sending event to main thread for
request(0x1206198)
2013-12-20
11:34:04.277 Lync[563:3a71018c] INFO TRANSPORT
CMetaDataManager.cpp/581:Received response for meta data request of type 60
with status 570556421
2013-12-20
11:34:04.277 Lync[563:3a71018c] ERROR TRANSPORT CMetaDataManager.cpp/597:Unable
to get a response to an unauthenticated get to url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:34:04.278 Lync[563:3a71018c] INFO TRANSPORT CAuthenticationResolver.cpp/210:MetaData
retrieval for url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
completed with status 570556421
2013-12-20
11:34:04.278 Lync[563:3a71018c] INFO TRANSPORT CAuthenticationResolver.cpp/239:Deleting
1 pended Meta data requests for url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:34:04.278 Lync[563:3a71018c] ERROR TRANSPORT CAuthenticationResolver.cpp/288:Unable
to get the meta data for server url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO TRANSPORT
CAuthenticationResolver.cpp/293:Failing request to the request manager
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO TRANSPORT CRequestManager.cpp/273:Failing
secure request UcwaAutoDiscoveryRequest with status E_ConnectionTimeoutError
(E2-2-5)
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1284:Received autodiscovery response with status
E_ConnectionTimeoutError (E2-2-5)
2013-12-20
11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryService.cpp/1242:Raising Autodiscovery event with status
E_ConnectionTimeoutError (E2-2-5) for eventType 0
2013-12-20
11:34:04.280 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/417:Received
event for type 0 with status E_ConnectionTimeoutError (E2-2-5)
2013-12-20
11:34:04.280 Lync[563:3a71018c] INFO APPLICATION
CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/496:Raising Autodiscovery event
with status E_ConnectionTimeoutError (E2-2-5) for eventType 0
2013-12-20
11:34:04.280 Lync[563:3a71018c] ERROR APPLICATION
CUcwaAppSession.cpp/2066:Auto-discovery failed, aborting sign-in!
2013-12-20
11:34:04.280 Lync[563:3a71018c] INFO APPLICATION CUcwaAppSession.cpp/998:CUcwaAppSession::setNewActualState()
state=0
2013-12-20
11:34:04.294 Lync[563:3a71018c] INFO UTILITIES
CBasePersistableComponent.cpp/230:Storing 7 out-of-sync components took 10ms
2013-12-20
11:34:04.295 Lync[563:3a71018c] INFO UTILITIES CiOsAppStateQuery.h/147:Clearing
keep-alive timer callback
2013-12-20
11:34:04.295 Lync[563:6d00000] INFO TRANSPORT
CHttpRequestProcessor.cpp/134:Clearing request processor for component
UcwaAutoDiscoverySession on sign-out.
2013-12-20
11:34:04.295 Lync[563:62d4000] INFO TRANSPORT
CHttpRequestProcessor.cpp/134:Clearing request processor for component
MetaDataManager on sign-out.
2013-12-20
11:34:04.295 Lync[563:3a71018c] INFO APPLICATION CAlertReporter.cpp/64:Alert
received! Category 1, Type 201, level 0, error E_ConnectionTimeoutError
(E2-2-5), context '', hasAction=false
2013-12-20
11:34:04.296 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x11cbe40.
2013-12-20
11:34:04.296 Lync[563:62d4000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x11c0a40.
2013-12-20
11:34:04.296 Lync[563:3a71018c] INFO APPLICATION CAlertReporter.cpp/117:Alert
cleared of Category 1, Type 201, cleared 0 alerts
2013-12-20
11:34:04.297 Lync[563:3a71018c] INFO APPLICATION
CTransportRequestRetrialQueue.cpp/725:Response received for req.
GET-AuthenticatedUserGetRequest(0x1201ab8): E_ConnectionTimeoutError (E2-2-5)
(RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
2013-12-20
11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioVideoToastViewController.mm/992:Cancelling
local notification
2013-12-20
11:34:04.299 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
stream 0x125fa90.
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI CMRootViewController.mm/378:ActualState
= 0 DesiredState = 2 DataAvailable = 0
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI
CMDetailViewController.mm/229:ActualState = 0 DesiredState = 1 DataAvailable = 0
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI CMDetailViewController.mm/262:ActualState
= IsSignedOut DesiredState = BeSignedIn DataAvailable = 0 Showing UI =
CredentialTableViewController
2013-12-20
11:34:04.300 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.301 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/745:adding the
desired view
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
is 1
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/114:showalert
is 0
2013-12-20
11:34:04.302 Lync[563:3a71018c] INFO UI CMUIUtil.mm/402:Mapping error code =
0x22020005, context = , type = 201
2013-12-20 11:34:04.303 Lync[563:3a71018c] INFO UI
CMUIUtil.mm/1680:Mapped error message is 'Non riesco a connettermi al server
perché potrebbe essere occupato o temporaneamente non disponibile. Riprova.
2013-12-20
11:34:04.304 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
45.000000, x 64.000000, y 0.000000
2013-12-20
11:34:04.304 Lync[563:3a71018c] INFO UI
CMNotificationManager.mm/1089:viewFrame: origin x 64.000000, origin y 0.000000,
height 1024.000000, width 45.000000
2013-12-20
11:34:04.304 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
936.000000
2013-12-20
11:34:04.305 Lync[563:3a71018c] ERROR UI CMDismissButtonBaseViewController.mm/104:after:
self.label.frame height 41.000000, width 936.000000, x 44.000000, y 2.000000
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
view is same as the current view
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.306 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
is 0
2013-12-20
11:34:04.306 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
45.000000, x 64.000000, y 0.000000
2013-12-20
11:34:04.307 Lync[563:3a71018c] INFO UI
CMNotificationManager.mm/1089:viewFrame: origin x 64.000000, origin y 0.000000,
height 1024.000000, width 45.000000
2013-12-20
11:34:04.307 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
936.000000
2013-12-20
11:34:04.307 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/104:after: self.label.frame height
41.000000, width 936.000000, x 44.000000, y 2.000000
2013-12-20
11:34:04.337 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.337 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
view is same as the current view
2013-12-20
11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.339 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert is
0
2013-12-20
11:34:04.339 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
45.000000, x 64.000000, y 0.000000
2013-12-20
11:34:04.339 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1089:viewFrame:
origin x 64.000000, origin y 0.000000, height 1024.000000, width 45.000000
2013-12-20
11:34:04.339 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
936.000000
2013-12-20
11:34:04.339 Lync[563:3a71018c] ERROR UI
CMDismissButtonBaseViewController.mm/104:after: self.label.frame height
41.000000, width 936.000000, x 44.000000, y 2.000000
2013-12-20
11:34:04.340 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/162:Details
Pane is in Full screen with controller
2013-12-20
11:34:04.340 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/204:Split view
frame orientation UIInterfaceOrientationLandscapeLeft Height = 748.000000 Width
= 1024.000000 origin.x = 20.000000 origin.y = 0.000000 keyboardHeight =
0.000000
2013-12-20
11:34:04.341 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/162:Details
Pane is in Full screen with controller
2013-12-20
11:34:04.341 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/204:Split view
frame orientation UIInterfaceOrientationLandscapeLeft Height = 748.000000 Width
= 1024.000000 origin.x = 20.000000 origin.y = 0.000000 keyboardHeight =
0.000000
2013-12-20
11:34:04.343 Lync[563:3a71018c] INFO UI
CMToolsViewController.mm/349:ActualState = 0 DesiredState = 1 DataAvailable = 0
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI
CMAlertViewController.mm/93:ObservableListItem Added event received
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/103:showalert
is 1
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
in
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
view is alert, size 1
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
view is same as the current view
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
floating views
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
is 1
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/114:showalert
is 0
2013-12-20
11:34:04.345 Lync[563:3a71018c] INFO UI CMUIUtil.mm/402:Mapping error code =
0x22020005, context = , type = 201
2013-12-20
11:34:04.346 Lync[563:3a71018c] INFO UI CMUIUtil.mm/1680:Mapped error message
is ‘Cannot connect to the server because it could be busy or temporarily
unavailable. Retry.’Hi Kent,
thanks a lot for your reply!
I created _sip._tls.domain-ext.com SRV record in the external DNS and now autodiscovery works fine. At the beginning I had not created it because I thought lyncdiscover.domain-ext.com A record was enough for autodiscovery. I still cannot understand
why lyncdiscover.domain-ext.com points to reverse proxy, while _sip._tls.domain-ext.com points to Edge server. It's strange because both are part of the research order of Lync 2013 desktop clients.
By the way, mobility still does not work. I tried to insert bot the https URLs as manual configuration but Lync 2013 for iPad was not be able to login. I tried to paste both the URLs in the web browser and:
with https://<ExtwebFQDN>/Autodiscover/autodiscoverservice.svc/Root appears the "Root.json" file to be downloaded;
with https://<IntwebFQDN>/AutoDiscover/AutoDiscover.svc/Root
the message "500-Internal error of server" appears.
Any suggests from you about how to check the configuration of ISS/ARR 2.5?
Thanks again! -
SAS Token failed with 403 error while generating for each request using ARR module
Hi,
We are doing an e-Learning application, which plays a course on the browser (inside a div control). The course contains list of static contents such as html, js, css etc., and media files .mp4. We are hosting the static contents (.html, .js, .css etc) into
Azure blob storage and media files into Media Service and CDN.
When user triggers to take a course, the browser first request the Web Role with landing page (Ex: FirstPage.html) and with Course Unique Id - Ex:
https://cloudservice1.cloudapp.net/course/courseid/firstpage.html. We have written a custom ARR Module (http://www.iis.net/learn/extensions/url-rewrite-module/developing-a-custom-rewrite-provider-for-url-rewrite-module),
which receives the request, parse it and generate blob storage url with SAS token using C# code for each file. Then route to blob storage. (we have already passing storage account details to ARR Module using Web.config)
For single user, the course plays fine. But we do the load testing with > 400 user load (with 5 instances), we are getting many 403 errors (and not all files). If the load is less than 200, we don’t get such issue.
Also, we are using REST code to generate the SAS token. When the SAS token expiration time extending more than 60 min, getting error “Access without signed identifier cannot have time window more than 1 hour”. As the code is exist in ARR Module, unable to
refer the Storage Client assembly. This 60 min time interval is for each file request – so there could not be an issue on expiration, but feeling this might be an issue?
Can you please point me what could be the issue and how to solve this. Is the ARR Module caching the SAS token and providing the same even after the expiration time?
Many Thanks, Thirumalai Mhi,
There is a similar thread (http://stackoverflow.com/a/17572316 ), I recommend you could refer to it.
And I'd like to know how to set the expiry time in your code, and you could see this page (http://azure.microsoft.com/en-us/documentation/articles/storage-dotnet-shared-access-signature-part-1/
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Dell p2815q no longer working with Macbook Pro A1398
Hi, Some time ago I bought a dell p2815q monitor. It would work just fine using the display port to thunderbolt connector. After some time my Mac Pro simply stopped picking it up. When I connect it, it seems like it tries to display on it but it blin
-
Uploading iweb layout/site to personal domain
I'm using FireFTP through Firefox to upload my site designed on iWeb. However, once uploaded and I visit my site images don't show up, fonts are wrong and some text doesn't show. I'm getting really frustrated, I've tried the other free FTP's and they
-
How to upload a template in sap hr
Can anyone please hep me out to upload a template in sap
-
Adobe CS6 Deployment - Adobe ID
I have the enterprise deployment process all worked out. I have a question regarding the Adobe ID used when serializing the CS6 suite. Do I need to use the Adobe ID used to purchase the license or can I create a generic ID to be used for deployment?
-
on windows $.colorPicker() is not the same as the colour picker that appears for choosing colours when clicking either the fill or stroke colour (ie, looks like it belongs on windows 95). is there no way to call the actual colour picker, or am i limi