Arris Cable Modem not working with WRT54G Router

I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them. Any help GREATLY appreciated!
Thanx!

ok man, good new and bad news. Good news, i know what ur goin through cause i have the exact same problem. Tried a new router too (wrt54g to no avail). Bad news i have no idea how to fix it. I've tried everything. Linksys tech support hasn't emailed back after their originaly fix which did nothing. Please PM me if you get any ideas. Ps Have you noticed that when the setup page times out you can't get an ip wirelessly. Also, my temporary fix is power cycling. Somtimes it works for a few days, or sometimes a few hours.
[Mod Note: Email address removed. Get in touch through PM for details.]
Message Edited by OnnagokorO on 09-25-2007 08:45 PM

Similar Messages

Comcast Cable Internet not working with router (WRT54G), but network is fine?

My Comcast Cable Internet is not working with my router (WRT54G), but my home network is fine. The internet works without router.
I have a WRT54G Wireless-G Broadband Router from Linksys.
I was using Bellsouth DSL Internet up until two weeks ago.
I had my DSL modem connected to my router, and the router let me use the internet and share some files and printers with my laptop upstairs.
A few weeks ago we changed to Comcast cable. The technician came in and connected it himself, but only for the desktop. The internet worked perfectly, and still works perfectly on my desktop (the one downstairs). He didn't really give me any instruction or CD-roms for it.
When I tried connecting my router, the internet stopped working. It was weird because the router worked for the file sharing and printer sharing between both my computers, but the internet didn't work. Although, the light for the internet is lit on the router itself.
I even have this program called "AOL Network Magic" which shows a map of what is connected to the router, and it shows that the router and my laptop and desktop are connected, but then it has an "X" for the internet connection.
I have tried everything. I lost all of my CDs and things that came with Linksys, but I downloaded some guides from the Linksys website and it doesn't really help. I tried something called "NetSet", but after I set everything up it says my router is not compatible or something with NetSet. I read a bunch of FAQs, I tried going to comcast and seeing if they had any FAQS about it, but I can't find anything.
Maybe one of you can help me?
Also, I don't know my modem's IP address. I had it for Bellsouth, and sometimes when I would lose my connection I would go there and click on "reconnect" or something like that.
So the only way I can use the internet is to disconnect everything from my router and connect the ethernet cable directly to the modem.

You may open the web setup utility page of the router by typing its IP address on your browser's address bar. By default, it is 192.168.1.1. When you're asked for username, you may leave it blank. For password, its "admin". If in case that does not work, reset your router at the back for 30 secs and do a power cycle again, see if it becomes accessible after that...
"The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

Airport Express not working with wireless router

I just bought Airport Express to play music on my stereo. My PC running XP is connected to my wireless router (TeleWell TW-EA510v3) with ethernet cable and airport express wirelessly. Problem is that Airport Utility (and iTunes) can't find AE if it's not connected to router with ethernet cable.
I can connect to AE from Aiport Utility by "configure other" option so it's connected to my wireless network correctly.
Is this kind of set up even possible (pc wired to router and AE wireless)? I have tried tried WEP, WPA/WPA2 and no encryption on my wireless network and AE connects ok every time but Airport Utility still can't find it. I even tried to make a WDS network but AE was not compatible with my router. Now I can't come up with anything else to try.
Is there anything else to do? Should I buy WLAN adabter to my PC and would AE work then?
Why can't Apple make Airport Utility to recognise AE with given IP like with "configure other" option? Should not be too hard to program?!
Message was edited by: -MTL-

Follow the isntruction lisetd below...they work.
Actually, the ae is a slick device, once you get it to work.
Make sure that one (or both) checkboxes in Airport Utility > Airport Express tab
(middle of page) are not checked...if one or both are checked, they limit (hide) wireless connectivity options (e.g., WEP-64) to choose from.
P.S. You must have patience: it may take a couple of minutes to establish the connection and turn the led to solid green. So, give it a chance.
===============================================================================
OMG!!! You are da man!!!
I have this streaming perfectly now!! Here is what I did for others to see and use (it does work perfectly)
Step 1) Clear/Reset the Airport Express
Step 2) Connect the Airport Express directly to the Router/Modem via Ethernet to set up Wireless
Step 3) Do it via the Manual Set-up Effort Listed Below following:
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing Linksys wireless network>
o Wireless Security: <select the encryption type of the existing wireless network> I have 64bit WEP
(Same as 40bit on the drop down menu)
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)
Once it congratulates you, unplug the ethernet cable
Verify in Aitport Utility that it still recognizes (if not, repeat the above). Note this may take a few minutes, so be patient.
Now place the airport express with your stereo (or whatever) and again be patient as it tries to find the network
(mine took 4 minutes) then it turns green and you are off listening to music on your stereo downstairs in another room.
Frustrating when it does not work at first, but keep trying and it will work!!
Thanks everyone for your help!!
===============================================================================

Airport Express worked with previous ADSL modem, not working with new one

hello all.
maybe the majority of you people won't be able to help me, since i am in Brazil.
this is the story:
for the last 4 years i was a subscriber of the Speedy ADSL provider (in conjunction with the Terra content provider). the Sppedy service is part of the Telefonica telephone company and uses the regular telephone infrastructure to provide the ADSL signal thru telephone lines.
approximately 2 years ago i bought an Airport Express and set it up with the ADSL modem that Speedy provided to me. configuration was a breeze and it worked flawlessly since then.
as of last thursday (april 7th) i became a subscriber of the Ajato ADSL provider. the Ajato company is part of the TVA (cable tv) company and uses the TVA cable tv infrastructure to provide the ADSL signal.
the problem is: when i connect the Cisco DPC3000 ADSL modem to my Macbook via ethernet cable, i can surf the internet with Ajato with no problems. but when i connect the modem to my Airport Express (even though i have reset AE in order to clear the previous Speedy/Terra configuration), i get no internet in my home wireless network.
i know you guys don't have Ajato there, of course. but i suppose some of you might have faced similar problems in similar cable ADSL environments.
this said, any kind of help or hint is greatly appreciated.
Message was edited by: Amaury Vargas: typos

Amaury Vargas wrote:
when i connect the Cisco DPC3000 ADSL modem to my Macbook via ethernet cable, i can surf the internet with Ajato with no problems.
First that Cisco DPC3000 is a cable modem, not a ADSL modem. You probably don't need the DSL configuration that you had before.
when i connect the modem to my Airport Express (even though i have reset AE in order to clear the previous Speedy/Terra configuration), i get no internet in my home wireless network.
How did you "reset" the AE? How is it configured now? You probably need a setting of "Connect Using:" "Ethernet", rather than the "PPPoE" setting you may have had before.
If everything else looks good, it's common to have to reset a modem when switching what device is connected to it. Try powering down the modem for a few minutes. If it has a reset switch, press that.

Printer not working with new router

I have a new router and my laptop with Windows XP is working Ok
My printer Deskjet 3520 network test result shows successful setup But it does not print when laptop requests
What can I do

Hi @Jobrig,
Welcome to the HP Forums!
I see that your HP Deskjet 3520 is not working with your new router, and I am happy to help with this connection issue!
For further assistance, I will need to know: if you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos, and if the printer is able to make copies.
In the meantime, please see the following:
This printing guide, Print Jobs are Stuck in the Print Queue.
This website, HP Wireless Printing Center, may also help.
Hope these guides will help you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Hp Photosmart not working with new router

My Hp Photosmart D110a will not work wirelessly with my new Netgear N600 router. This is the second new router I have tried. With the first one Belkin I could at least get it to print from my PCs. But never with my IPad. Now the printer will not print from anything. I have reset it, entered new passwords etc. spent hours on the phone with tech support. What to do now?

@Ann99, welcome to the forums
I understand your Photosmart D110a model is not working with your new router. I will gladly do my best to help you.
I have some questions and some things for you to try.
1. Is the printer connecting to the wireless network successfully when you run the wireless setup wizard from the printers front panel or is the printer not found when you are running the installation from your PC?
2. What did tech support determine the issue was when you called them?
3. Here are some guides for you to try, these 2 guides relate to the questions I had asked in the first question:
Unable to Connect to a Wireless Network When Using WEP Encryption and Shared Key Authentication
The Printer Is Not Found During a Wireless Network Installation
4. What Operating System are you running on your computer?
5. Where are you running the installation from (disk, download or HP Printer Install Wizard for Windows for Windows)?
Please let me know all of the information and results from your troubleshooting above!
Have a terrific day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

WRT54GS with Mac OS 10.6.8 and RCN cable modem not working

Hello,
I have a Linksys WRT54GS, version 6 with Mac OS X (version 10.6.8) hooked up to a Scientific Atlantic cable modem, with RCN as the ISP.
Recently, RCN had some network issues, and so I had to power down and reset my modem. The modem is working fine now -- no problems at all when the Mac is connected direclty to the modem.
The router's network is OK in that I can connect the Mac wirelessly to the network, but I can't connect to the internet through the router (through neither the wireless or wired connection).
I have downloaded the latest firmware update for the router, following the Linksys site instructions, but this has not helped me solve the problem.
Does anyone have any advice as to what I should do? I did call Linksys tech support on the advice of RCN, and they said that the router does appear to be working (power, WLAN, and Internet lights are on), but they would be charging me nearly the cost of a new router to fix the problem.
Any advice would be appreciated!

Since you upgraded the Router WRT54GS with the latest firmware so once reset the Router and power cycle the whole network… Then connect the Modem with Linksys Router on the Internet Port and then connect any one computer to any one of the Ethernet port on the Router [Numbered – 1, 2, 3 and 4]… Let me know the RCN connection is a DSL connection or cable connection…
So if you have a DSL connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4020&userrole=Linksy...
So if you have a Cable Internet Connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&vw=1&articleid=3686
As far as the wireless is concern:
# Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page…
# Then Click on wireless Tab create the Wireless Network Name SSID and select the channel to 6, 9, and 11… Click Save Settings...
# Then Click on Wireless Security sub tab and select the security mode and provide the password as per the requirement… Click Save Settings...
After doing the settings try to connect the preferred network on the wireless devices and check the connectivity….

Wi-Fi not working with WRT54G

Once in a while it works , but most of the time it doesn't. Safary can not find server. We have 2 iPhones , and both are the same.
I just updagted the latest firmware on my router ( 4.21.1 ) .
I have wireless securety disabled , SSID broadcast on ,and my DNS is what my other computers in my house are set to , witch always work.
?

I also have a post (somewhere) on the WRT54G with some things people said to try .. haven't had time yet to try them.
I can't tell at this point if it is a "your mileage may vary" sort of thing or if it is some magic combo of firmware, router settings and luck. But you are not alone.
The forums aren't conducive to finding and replying to one thread for this sort of thing. If you go thru enough pages in the forum you will find maybe five or six threads on this subejct (or people having similar problems with other router models)
My wifi does work fine at Starbucks and Panera bread ...

Only the wireless is not working on WRT54G Router

I have been using this wireless router for a while now. We had a snow storm couple of days ago and since then the wireless portion of it is not working. I have Vonage and other power adapters connected through the other ports. All of them work fine except for the wireless. I have been trying on 2 laptops and the cell phone but had no luck even after doing a hard reset on the router. Any ideas would be greatly appreciated.

Snow storms do not affect wireless connections. We have close to a meter of snow on the ground. Temp -22 with windchill -30 does not affect my wireless connection on a WRT54G router. You may have had a power faillure or power surge that killed your router. Make sure your wireless is set to enable, Use a unique name for your network. Do not use Linksys as your network name. Enable the wireless switch on your laptop.
Greetings from Northern Ontario, Canada

Easy Link 1.6 no longer works and latest version states will not work with my router

I have the WRT54G router (version 8.00.2 firmware) and the Easy Link Software I got with it no longer works correctly (version 1.6), saying I am not connected to the internet even though I clearly am connected. (I theorize that it tries to connect by pinging Linksys and I cannot ping Linksys using any method, so I think Linksys no longer accepts pings.) I downloaded the newest version, thinking it would work, and the forum states it will only work with a few routers that are more recent (I bought mine in Jan 2008.) Am I out of luck, with no verion working correctly? I appreciated the information that was found in the Easy Link Advisor software that I no longer have.

Cunning1_
You are a legend!! I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!! I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!! Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
Whatever - one step and now I can enjoy my music through my house again!
Thank you, Thank you, Thank you

How do I get a Motorola SurfBoard SB6141 DOCSIS 3.0 Cable Modem to work with my AirPort?

I just bought a Motorola SurfBoard SB6141 DOCSIS 3.0 Cable Modem to replace the one Comcast was renting to me. My configuration is as follows:
Modem is wired via ethernet to the AirPort Time Capsule
Time capsule is wired to an iMac, a PC, and an Xbox 360
Time capsule is wireless broadcasting to connect various peripherals around the house (iPhones, consoles, printer, Macbook, etc)
Anyway, while the modem works great plugged straight into the iMac, we completely lose our internet connection (wired and wireless) if I plug the AirPort Time capsule into it.
Does anyone know if there is a conflict that I can disable on one of these devices? The airport utility was warning of a double NAT.

Did you power off the SB6141 for 20min before you change over from iMac to the Time Capsule.. this is required. (Test at 5min if you want).
Make sure the TC is set to dhcp on the internet tab.. and DHCP and NAT on the network tab.
Power up the modem.. wait a couple of min for it to settle down then plug in the TC.
No luck try longer times.. or ring comcast and ask them to reset the IP.
If your TC is tall one or running 7.6.4 firmware.. another problem may arise where the 6141 does not connect properly.. there is a problem between this modem in particular and the apple routers.
You can try using a crossover cable instead of ordinary patch cable or use a small 10/100 switch between them.. that will sometimes help.

Airport Express Not Working With Netgear Router

I have two Airport Expresses connected to my Netgear WNDR3300. I run Windows 7 on all my computers. One express works fine, wirelessly streaming music in several rooms. However, the other does not work unless it is plugged into my router. When it is unplugged and I try to connect to it via iTunes I have a "connection timed out" message. Genius wasn't able to help me, and the Apple support won't help me over the phone because the express is out of warranty. It is a 1st generation Express, but was working fine until I installed the newer express. Can anyone help?

I am sorry that I don't have a definitive answer but I also have Windows computers and I have "inherited" some older Apple devices from my son and am trying to learn about them so in addition to searching this group, I "Googled" "1st generation airport express" and it listed many specific posts in this group - I read them all and they might answer your question - good luck

Setting Up LG Wireless Adaptor to work with WRT54G router

My parents recently bought a High Def LG television and they got a wireless LG Adaptor for it (AN-WF100). My brother was able to insall it, but when we try to connect to the router, we get an error message saying that DHCP needs to be enabled. From what I can see when I go into the router settings, DHCP is enabled. We are pulling our hair out trying to figure out what settings we need on the router to make this work. We have tried both setting up the connection automatically and manually with the IP, Gateway, etc. I don't know what other information is needed, but I will provide further details if anyone has any ideas. We also have two applications set up under the Applications and Gaming tab (Nintendo DS and Wii). I don't know if that could be interfering with anything. Any help would be appreciated!
Solved!
Go to Solution.

LKKelly wrote:
I believe I have the same issue. New router, new LG 550 with WIFI Dongle. Router works with everything else but TV cannot connect. I'm receiving same message as Marie. HOw/where to I find and correct the WEP to WPA?
Thanks!
The WEP/WPA was set by the one who configured the router. Make sure you are entering the correct character and it is case sensitive.
Yesterday is history. Tomorrow is mystery. Today is a gift.

My auxiliary cable will not work with my ipod touch

Will someone please help? My auxiliary cable will not fit my ipod touch. I am trying to hook it up to my stereo. My ipod 4th generation fit just right.

See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Thunderbolt bridge ethernet connection will not work with ATT router/modem

I am trying to connect to my ATT Uverse router with a Thunderbolt adapter and it will not connect. Any suggestions?

finally works now with 10.8.2 upgrade!!!!!!!

Arris Cable Modem not working with WRT54G Router

Similar Messages

Maybe you are looking for