Arrow key not working properly in JTable in Modal dialog

in my programme i have a table in a dialog. now while editing table cells wich have a defult editor, left write arrow key does not working as it supposed to. while editing if you press arrow key instead of moving between the characters of the cell it moves between cell as it work with tab key.

Um...
I also want to know how can solve this problem.

Similar Messages

Wired Keyboard: Right Arrow Key Not Working Properly

The right arrow key on my new wired keyboard doesn't work on the first press. After the initial press it works, and if I'm only using the arrow keys themselves it works fine too. But otherwise it takes two presses to move the cursor initially.

I found the problem, at least for my keyboard. Open Keyboard Viewer from the International menu, the one that displays a flag.
Tap the right arrow key lightly. Nothing happens on the viewer. Tap any other key lightly. They display just fine. Now, give the right arrow key a firmer tap. You should see that it registers every time as long as you tap it a little harder than the other keys.
So, at least in my case, it is keyboard specific. That probably explains why some have the problem and other's don't. I will exchange this keyboard for another one until I finally get one that works. Thank God for "Keyboard Viewer" or I never would have nailed this down.
Poor quality control at play here me thinks.
John

Wired keyboard-number pad&right arrow keys not working-serial # help!

Hello to whomever reads/replies -
I have a wired keyboard for my iMac(it's not the aluminum imac, but the version before it with the keyboard and mouse that came with it). I got this keyboard June 2007 after the original keyboard sent to me had problems with it with some keys not working properly. And now about a week ago my right arrow key and the zero, decimal point, one, two, three and enter button on the keypad stopped working out of the blue. One night they worked and the next they didn't with nothing being done different, nor was the keyboard stored differently.
I've cleaned the keyboard inside and out twice and tried pushing the little squishy thing under the keys when you pop them off and there's no response with those being pushed either so something's got to be wrong with the keyboard itself.
Also, when I go online to look up the warrenty on this keyboard, #1 i can't find where it tells me where the serial number on the **** WIRED keyboard is, just gives me where i can find it on the WIRELESS keyboards. Ugh. So I looked under my keyboard and punched in the numbers and letters that i found on a little silver plate just below where the wire and USB ports are in the top of the keyboard and I get an 'invalid serial number' error message.
So.. could anyone help me with these problems? I'd really rather not call tech support since it took me over two hours to explain to the man that I spoke with last year about my other keyboard and I just don't have the time! Thanks in advance!
Sharon

Hello sharon:
Welcome to Apple discussions.
Run, don't walk to the phone. Call Applecare and indicate you have a warranty problem. The KB is (or will be shortly) out of warranty. It may take you some time, but it may save you some money in the long run.
Incidentally, it appears to me that your KB is, indeed, broken.
Barry

Left and right Arrow keys Not working now

My left and right arrow keys are not working properly now.
For example, when typing, left arrow does not produce the desired action (move cursor one spot to the left), and right arrow does not produce the desired action (move cursor one spot to the right). Also, control + left no longer activates spaces, and control + right no longer activates spaces.
Interestingly, in investigating the problem, I noticed that my shortcut keys for activating spaces and for activating expose had been changed (software update?). Before, I had set F5 (without pressing fn) for expose and had set F6 (without pressing fn) for spaces. Now, I noticed spaces was set back to the default of F8 (requiring fn).
The issue persists after shut down, and even when logged on to other users, e.g. Guest.
All other keys seem to be working fine, including the up and down arrows.
It is not hardware because fn + left + right produces the "[" character on the screen.
Any ideas?

You might want to post in the MacBook forums as this seems to be a hardware issue and those gurus hang out there. http://discussions.apple.com/category.jspa?categoryID=248

Up and Down Arrow Keys Not Working

I have had the HP Pavilion g6t-1b00 CTO Notebook PC for a year or two now. I've been having a couple of problems with internet connectivity and putting my computer on "sleep".
However, few days ago, my keyboard randomly started acting weirdly. When I would try to type certain letter/numbers, they would come out differently.
Ex. pressing the space bar would show up " ./M" instead
I tried restarting my computer many times and installed a BiOS update which fixed all of my issues except for my up and down arrow keys. As of now, they have no function; I can't scroll with them and they don't seem to be taking on the role of another key. I have tried using the keys on different programs. Using the touch pad to scroll works but I still can't use the up and down keys.
Is there anyway to get the up and down arrow keys to work again?
This question was solved.
View Solution.

Hello Larasoft,
I understand you’re up and down arrow keys are not functioning, is that accurate? I will do all I can to help you with this issue.
I want you to access the setup menu to test the keys out, see instructions below.
1.       Shut down the computer.
2.       Locate the F10 key across the top.
3.       When you turn the computer back on immediately start tapping the F10 key repeatedly.
4.       If successful you should be on setup utility screen. What’s different about this is you can only use you arrow keys to navigate.
5.       Try working the arrow keys up and down on different menus and see if they work.
6.       Once you tested it press F9 to setup defaults and then press F10 to save and exit.
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos. I really appreciate it.
Please respond at your earliest convenience with you results.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Windows 7 Brightness and Function key not Working Properly

i have HP 15-af024AU APU Quad Core A8-7410 - (4 GB DDR3,1 TB HDD) Noteboook and it came with windows 8.1 preinstalled than i installed windows 7 ultimate.
i have problem in Display Brightness i am not able to change Brightness by function key or by manually from windows settings.
2. my Function key are not working properly . all key are fliped whiout holding function key it work as function key. 3. bluetooth is not working when i search for new device not able to find any available discouable bluetooth device. 4. wireless button software is not wokring in windows 7 i already updated my bios that available in drivers support and install alll drivers too properly so please give proper drivers for windows 7 for this product that works perfect.

Sorry that driver didn't work. You can try this graphics driver and if that doesn't work, unfortunately, I won't be able to help you with that issue. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp71253.exe As far as the Fn keys being 'flipped,' I have no idea what you mean by that, or what to do about it. Did you install the software that controls the funtion keys? This package contains the HP System Event Utility, which enables special function keys on supported notebook models to be programmed. For example, HP System Event Utility enables users to press the Fn+ESC keys to view system information. This software works with the supported operating systems. File name: sp71156.exe

Keyboard windows key not working properly

I am not able to navigate to start screen with regular windows key press. I need to press hard to navigate to the start screen. But other functions with windows key is working properly. For Eg: Windows Key + R is working properly with regular press. Please help.

Hello:
I do not know of a setting that would do that - especially intermittently.
I would suspect the KB is failing/has failed.
Barry

HP G62-348CA number keys and arrow keys not working

Good day Experts! Can someone help me fix my laptop? I got G62-348CA unit. only number 5 and 6 in my number keys are working and also arrow keys down and right are not functioning. at first it was built with windows 7 home premium 64bit but then i have to reformat my laptop with windows 7 ultimate but i dont have available 64bit so i install 32bit of the OS. before i install the OS, number keys and arrow keys are working fine but after I reformat my laptop with ultimate 32bit, the said keys are not working. please guys help me. im having trouble with my unit and i dont know what to do. its pretty bad i dont have any idea. all the best with you guys and i'm hoping for your fast and kind response. thank you!

Because the operating system does not affect the keyboard in that way . .. If the operating system has issues it would switch keys or assign wrong characters.
I have replaced over 200 keyboards because of such issues

Key not working properly

I bought E-71 about one month back. I upgraded its software to 110.07.127. After this upgrade process, the keys are not working properly.
For example, the key titled '?' is not printing '?' while another key titled '.' is printing '?'. This problem is for the whole keypad.
FYI, my keypad also contains the Arabic letters. They are also not working after this upgrade.
Software upgrade is done from the following link: http://www.nokia.co.in/A4767968
Thanks a lot in advance for the kind support.
Nabeel ur Rehman
Nabeel ur Rehman
Solved!
Go to Solution.

This has happened because your phone was most likely imported and modified before it was sold you you. Updating the firmware has reset it back to it's default configuration
You need to contact a nokia care point for help getting it back working properly. If the care point isn't an option visit the retailer where you purchased it.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Arrow keys not working on CS2 64 bit system

Recently purchased a new computer with 64 bit system 4meg ram. I installed CS2 and everything seems to be working except the arrow keys and the control +/- features. Arrow keys are working in other programs like word and publisher. Any suggerstions?

I had the same issue on one machine but not another, so I compared the Photoshop install directories and found that (among other things) Tw10122.dat was different between the two. My only guess is that the version we have is localized to a different country, and this is causing the issue. Perhaps a common pirated version is also localized to a different country and that's why this issue is common among pirated versions, even though ours are not pirated.
...Or maybe they are and we just don't know it! Either way, replacing this file with my other version fixed it for me and maybe it will for you, too. Here's what to do:
Close Photoshop (if opened)
Navigate to your Photoshop install directory. This is c:\Program Files (x86)\Adobe\Adobe Photoshop CS2\ by default on x64 systems or c:\Program Files\Adobe\Adobe Photoshop CS2\ on x32.
Find Tw10122.dat and rename it to Tw10122.dat.bak.
Download my attached Tw10122.dat to your install directory.
Launch Photoshop and test it.
If the issue persists, or anything else seems wrong with Photoshop, restore your old Tw10122.dat by deleting mine and renaming Tw10122.dat.bak to its original filename. Please let us all know if this works for you.

HT4623 Lock key not working properly

Lock key not functioning properly.
Phones gets lock on clicking it 2-4 times

This has happened because your phone was most likely imported and modified before it was sold you you. Updating the firmware has reset it back to it's default configuration
You need to contact a nokia care point for help getting it back working properly. If the care point isn't an option visit the retailer where you purchased it.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Message ShortCut Key not working properly

Hellow every one, guys i am encountrying a problem regarding my nokia e5 , i've just bought it recently and still left with 8 months warranty. The problem i am facing is, the message shortcut key which is on the keypad of this Phone, is not working properly. When i do long press to open new text msg, it sometimes doesnt opens any thing and sometimes even open messaging and then close it. At a certain angle i have to apply a little more force in order to operate it properly. Please help me wheather its a hardware problem or any sort of dust particles have emerged inside the keypad resulting in loose contact of the button and the motherboard.
REPLY ASAP.

Hi Shanam,
Welcome to the forum
Thanks for joining the community, if you believe there is an issue with your device that is preventing you from optimizing all the options available to you.
I would advise for you to bring/ or send it for repair. Keep sending us your replies and comments on the forum.
Kind regards.
Carl
If this post answers your question, you can help others by clicking the green accepted solution' button.
Please ask your questions to the main board and not to my mailbox. Thank you.

G510 installed Windows 8.1 Function keys not working properly

Hi
I am Bharath
last week i have puchased lenovo g510 laptop and installed windows 8.1 and later on automatically function keys and all the keys were not working properly. if i press key to increase brightness and some other operation is performing by its own. What's wrong with this LENOVO brand is this the way you take lots of money from people. I need an immediate solution from basic support to my home. If at all it is not resolved i will file a case on consumer court that LENOVO was chaeten me and what ever it may be i will go for end.
Give me a clear answer with out any stupidity
Moderator Note; subject edited; post moved here to start new thread

hi bharath666,
Welcome to Lenovo Community Forums!
Were you able to install all the drivers and Software After the New installation of Win 8.1?
Get the drivers here
http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-...
Start with the Chipset installation first then whatever comes next.
Make sure you select the proper version for your Windows type and version.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Curve 9300 3G - A few Keys not working properly

Somebody close had gifted this Blackberry Curve 9300 3G mobile to me. After using it for just 2 months, the Space, alt and 0 keys are not working properly. At times I just have to keep pressing for these respective keys to respond and at times upon pressing, these keys respond more than once. Does anybody know how to tackle this issue.
Regds
AK

Maybe your Keypad Membrane not working

Satellite L850 - Special function key not working properly

Hi Everyone,
I had Satellite L850 (pskg8a-07f001) running windows 8 64 bite for just 2 months.
Just within this week, the special function key not working, each time I start the pc, i have to go into toshiba desktop assist then function key then click ok, it will working.
But the touch pad has been set as enabled, also under keyboard setting has been set as special function mode. But don't know why each time start the pc have to go into function key box then click ok.
When I bought it everything is ok, i can use the special function key to turn up and down the volume and disable wireless...etc
Please advise. Thks a lot!

Take a look here:
Function key changes in Satellite and Qosmio 800 series
http://aps2.toshiba-tro.de/kb0/TSB2903E00000R01.htm
You can use the traditional FN + F key mode or just an F key mode.
This can be enabled and disabled in BIOS or the HWSetup
In BIOS go to Advanced -> System configuration -> Function key mode
This mode can be changed
Also be sure that Function Button option is enabled too

Arrow key not working properly in JTable in Modal dialog

Similar Messages

Maybe you are looking for