Arrow keys quit working after clicking on hyperlink
Hi all, I am using FM 8.0p277 on windows 7. When I open a document and use the arrow keys to go through the document everything works fine. Hold arrow key down and it scrolls through the document. If I click on a hyperlink to go out the the web from the FM document, things go wrong. After that I cannot scroll through a document by holding down the arrow key. I have to click one time to go down one line then click again to go another line. The same going left or right. If I hilight text I have to stop one word short of where I want to be, then the next word is hilighted after I remove my fingers from the shift and ctrl keys. Is this something to do with the Windows 7??? I can work around it, but it is a pain. Thanks for any help you can give to me.
Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers.
Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
Try this even if you don’t see the red light.
3. Reset PRAM. http://support.apple.com/kb/PH14222
Do this twice
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so,uncheck it.
Similar Messages
-
Why do arrow keys quit working during a reading session
I've noticed many times while reading that when I first open a book I can use arrow keys to scroll and turn pages. But after while that quits working and I have to use the readers paging and scrolling tools. Which is much more difficult to me since you have to focus on finding them. Whereas with the arrow keys my hands just know here they are.
I haven't yet discovered what causes the arrow keys to quit working, but once they have the only way I've found to get them woking again is to completely close the book and reopen it.I have noticed this also. I am using OS X 10.6.1 and Digital Editions 1.7.1.1085.
I have tried many things to get the arrow keys working, on the assumption that I had done something to deactivate them. Now, however, I suspect this is a bug.
- D - -
The 4 5 6 keys and the up down arrows do not work.
I had the Cap C off for a While Had hit some key command
that shut it off so I got a new keyboard and it did the same.
HAs anyone had this problemDoes the problem happen if you reboot the system into Safe Mode by holding the Shift key at startup?
Additionally, does the problem happen if you create a new user account in the Users & Groups system preferences and log into that? -
Why after i update my left and right arrow keys stop working
my left and right arrow keys stoped working after i updated to Mavericks now the dont work
Hello ccombs2014,
It sounds like 2 of your keys are not working after updating to Mavericks. I found this section of an article for you to help troubleshoot this issue named:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use Mac OS X: How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Thank you for using Apple Support Communities.
All the best,
Sterling -
Beats audio quit working after updating driver
beats audio quit working after updating driver. Updated IDt driver and now now soundd. how to fix?
Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go to Control Panel,Programs & Features-Uninstall IDT software and restart the laptop.Next install using the downloaded file.
```````````````````````````````````````
If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Up and Down Arrow Keys Not Working
I have had the HP Pavilion g6t-1b00 CTO Notebook PC for a year or two now. I've been having a couple of problems with internet connectivity and putting my computer on "sleep".
However, few days ago, my keyboard randomly started acting weirdly. When I would try to type certain letter/numbers, they would come out differently.
Ex. pressing the space bar would show up " ./M" instead
I tried restarting my computer many times and installed a BiOS update which fixed all of my issues except for my up and down arrow keys. As of now, they have no function; I can't scroll with them and they don't seem to be taking on the role of another key. I have tried using the keys on different programs. Using the touch pad to scroll works but I still can't use the up and down keys.
Is there anyway to get the up and down arrow keys to work again?
This question was solved.
View Solution.Hello Larasoft,
I understand you’re up and down arrow keys are not functioning, is that accurate? I will do all I can to help you with this issue.
I want you to access the setup menu to test the keys out, see instructions below.
1. Shut down the computer.
2. Locate the F10 key across the top.
3. When you turn the computer back on immediately start tapping the F10 key repeatedly.
4. If successful you should be on setup utility screen. What’s different about this is you can only use you arrow keys to navigate.
5. Try working the arrow keys up and down on different menus and see if they work.
6. Once you tested it press F9 to setup defaults and then press F10 to save and exit.
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos. I really appreciate it.
Please respond at your earliest convenience with you results.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
Time Machine quit working after Upgrade to 10.9.2
Time Machine quit working after I downloaded and installed the latest security upgrade 10.9.2. Any suggestions?
I'm not sure this is what you want. There are a lot of repeated, multi-line patterns that I left in simply because I really don't know what I'm doing. My apologies if there is too much irrelevant information. Also, the logs did not go all the way back to when the problem started.
2/26/14 3:38:03.519 PM com.apple.backupd[917]: Starting automatic backup
2/26/14 3:38:03.741 PM com.apple.backupd[917]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/26/14 3:38:05.038 PM com.apple.backupd[917]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/26/14 3:38:05.057 PM com.apple.backupd[917]: Backup failed with error 2: 2
2/26/14 3:39:44.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 3:39:44.598 PM mds[37]: (Warning) Volume: vsd:0x7fd9e90c1000 Open failed. failureCount:0 (null)
2/26/14 3:39:59.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 3:40:00.384 PM mds[37]: (Warning) Volume: vsd:0x7fd9e8973200 Open failed. failureCount:1 {
DisabledRecycleCount = 1;
2/26/14 3:40:24.385 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:40:24.386 PM Solar Service[233]: End of data
2/26/14 3:40:24.386 PM Solar Service[233]: Event = 41 device index = 1
2/26/14 3:40:24.389 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:40:24.389 PM Solar Service[233]: End of data
2/26/14 3:40:24.406 PM Solar Service[233]: Event = b device index = 1
2/26/14 3:40:24.406 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): m_LastAveBattLvl 100.00
2/26/14 3:40:24.406 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): old_state 1 new_state 1
2/26/14 3:40:24.407 PM Solar Service[233]: x4301_ShrinkDetailedLog(): filein size 1838683
2/26/14 3:40:24.407 PM Solar Service[233]: device: E97752AB battery capacity: 100%
2/26/14 3:40:30.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 3:40:31.209 PM mds[37]: (Warning) Volume: vsd:0x7fd9e9129e00 Open failed. failureCount:2 {
DisabledRecycleCount = 2;
2/26/14 3:41:17.339 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:41:17.340 PM Solar Service[233]: End of data
2/26/14 3:41:17.340 PM Solar Service[233]: Event = b device index = 1
2/26/14 3:41:17.340 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): m_LastAveBattLvl 100.00
2/26/14 3:41:17.341 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): old_state 1 new_state 1
2/26/14 3:41:17.342 PM Solar Service[233]: x4301_ShrinkDetailedLog(): filein size 1838722
2/26/14 3:41:17.342 PM Solar Service[233]: device: E97752AB battery capacity: 100%
2/26/14 3:41:33.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 3:41:34.096 PM mds[37]: (Warning) Volume: vsd:0x7fd9e9044000 Open failed. failureCount:3 {
DisabledRecycleCount = 3;
2/26/14 3:42:30.457 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:42:30.458 PM Solar Service[233]: End of data
2/26/14 3:42:30.458 PM Solar Service[233]: Event = 41 device index = 1
2/26/14 3:43:45.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 3:43:45.605 PM mds[37]: (Warning) Volume: vsd:0x7fd9e9127c00 Open failed. failureCount:4 {
DisabledRecycleCount = 4;
2/26/14 3:43:53.506 PM Solar Service[233]: notification user info:{
NSApplicationBundleIdentifier = "com.apple.systempreferences";
NSApplicationName = "System Preferences";
NSApplicationPath = "/Applications/System Preferences.app";
NSApplicationProcessIdentifier = 870;
NSApplicationProcessSerialNumberHigh = 0;
NSApplicationProcessSerialNumberLow = 467058;
NSWorkspaceApplicationKey = <NSRunningApplication: 0x6000001178e0 (com.apple.systempreferences - 870)>;
NSWorkspaceExitStatusKey = 0;
2/26/14 3:44:09.427 PM PhotoScore Ultimate[935]: objc[935]: Class TSSandboxPrefs is implemented in both /Library/Frameworks/TSLicense.framework/Versions/A/TSLicense and /Library/QuickTime/Flip4Mac WMV Import.component/Contents/MacOS/Flip4Mac WMV Import. One of the two will be used. Which one is undefined.
2/26/14 3:44:09.663 PM PhotoScore Ultimate[935]: objc[935]: Class TSSandboxPrefs is implemented in both /Library/Frameworks/TSLicense.framework/Versions/A/TSLicense and /Library/QuickTime/Flip4Mac WMV Advanced.component/Contents/MacOS/Flip4Mac WMV Advanced. One of the two will be used. Which one is undefined.
2/26/14 3:44:10.741 PM PhotoScore Ultimate[935]: The function `CGSFlushWindow' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance. Please use `CGSFlushWindowContentRegion' instead.
2/26/14 3:44:24.315 PM WindowServer[123]: disable_update_timeout: UI updates were forcibly disabled by application "PhotoScore Ultimate" for over 1.00 seconds. Server has re-enabled them.
2/26/14 3:44:25.481 PM WindowServer[123]: common_reenable_update: UI updates were finally reenabled by application "PhotoScore Ultimate" after 2.17 seconds (server forcibly re-enabled them after 1.00 seconds)
2/26/14 3:44:25.865 PM com.apple.IconServicesAgent[236]: main Failed to composit image for binding VariantBinding [0x2d5] flags: 0x8 binding: FileInfoBinding [0x3e7] - extension: pdf, UTI: com.adobe.pdf, fileType: ????.
2/26/14 3:44:25.866 PM quicklookd[930]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: pdf, UTI: com.adobe.pdf, fileType: ???? request size:128 scale: 1
2/26/14 3:44:32.078 PM com.apple.quicklook.satellite[941]: Set a breakpoint at CGSLogError to catch errors as they are logged.
2/26/14 3:44:32.078 PM com.apple.quicklook.satellite[941]: CGSCopyDisplayUUID: Invalid display 0x00000000
2/26/14 3:44:32.094 PM com.apple.quicklook.satellite[941]: CGSConnectionByID: 0 is not a valid connection ID.
2/26/14 3:44:37.669 PM com.apple.quicklook.satellite[941]: CoreText performance note: Client called CTFontCreateWithName() using name "Opus Special Std" and got font with PostScript name "OpusSpecialStd". For best performance, only use PostScript names when calling this API.
2/26/14 3:44:37.670 PM com.apple.quicklook.satellite[941]: CoreText performance note: Set a breakpoint on CTFontLogSuboptimalRequest to debug.
2/26/14 3:44:38.132 PM com.apple.quicklook.satellite[941]: CoreText performance note: Client called CTFontCreateWithName() using name "Plantin MT Std" and got font with PostScript name "PlantinMTStd-Regular". For best performance, only use PostScript names when calling this API.
2/26/14 3:47:32.004 PM Solar Service[233]: notification user info:{
NSApplicationBundleIdentifier = "com.Neuratron.PhotoScoreUltimate";
NSApplicationName = "PhotoScore Ultimate";
NSApplicationPath = "/Applications/PhotoScore Ultimate.app";
NSApplicationProcessIdentifier = 935;
NSApplicationProcessSerialNumberHigh = 0;
NSApplicationProcessSerialNumberLow = 573580;
NSWorkspaceApplicationKey = <NSRunningApplication: 0x6080001172b0 (com.Neuratron.PhotoScoreUltimate - 935)>;
NSWorkspaceExitStatusKey = 0;
2/26/14 3:47:46.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 3:47:47.212 PM mds[37]: (Warning) Volume: vsd:0x7fd9e8a06200 Open failed. failureCount:5 {
DisabledRecycleCount = 5;
2/26/14 3:48:37.467 PM Solar Service[233]: notification user info:{
NSApplicationBundleIdentifier = "com.adobe.Reader";
NSApplicationName = "Adobe Reader";
NSApplicationPath = "/Applications/Adobe Reader 9_/Adobe Reader.app";
NSApplicationProcessIdentifier = 932;
NSApplicationProcessSerialNumberHigh = 0;
NSApplicationProcessSerialNumberLow = 565386;
NSWorkspaceApplicationKey = <NSRunningApplication: 0x6080001172b0 (com.adobe.Reader - 932)>;
NSWorkspaceExitStatusKey = 0;
2/26/14 3:48:42.275 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:48:42.275 PM Solar Service[233]: End of data
2/26/14 3:48:42.275 PM Solar Service[233]: Event = 41 device index = 1
2/26/14 3:48:42.279 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:48:42.279 PM Solar Service[233]: End of data
2/26/14 3:48:42.295 PM Solar Service[233]: Event = b device index = 1
2/26/14 3:48:42.295 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): m_LastAveBattLvl 100.00
2/26/14 3:48:42.296 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): old_state 1 new_state 1
2/26/14 3:48:42.296 PM Solar Service[233]: x4301_ShrinkDetailedLog(): filein size 1838839
2/26/14 3:48:42.297 PM Solar Service[233]: device: E97752AB battery capacity: 100%
2/26/14 3:49:00.301 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:49:00.301 PM Solar Service[233]: End of data
2/26/14 3:49:00.301 PM Solar Service[233]: Event = b device index = 1
2/26/14 3:49:00.302 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): m_LastAveBattLvl 100.00
2/26/14 3:49:00.302 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): old_state 1 new_state 1
2/26/14 3:49:00.303 PM Solar Service[233]: x4301_ShrinkDetailedLog(): filein size 1838877
2/26/14 3:49:00.303 PM Solar Service[233]: device: E97752AB battery capacity: 100%
2/26/14 3:50:16.949 PM com.apple.WebKit.Networking[374]: CFNetwork SSLHandshake failed (-9806)
2/26/14 3:50:18.793 PM com.apple.WebKit.Networking[374]: NSURLConnection/CFURLConnection HTTP load failed (kCFStreamErrorDomainSSL, -9806)
2/26/14 3:50:29.544 PM com.apple.WebKit.Networking[374]: CFNetwork SSLHandshake failed (-9806)
2/26/14 3:50:30.189 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:50:30.189 PM Solar Service[233]: End of data
2/26/14 3:50:30.189 PM Solar Service[233]: Event = b device index = 1
2/26/14 3:50:30.190 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): m_LastAveBattLvl 100.00
2/26/14 3:50:30.190 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): old_state 1 new_state 1
2/26/14 3:50:30.190 PM Solar Service[233]: x4301_ShrinkDetailedLog(): filein size 1838916
2/26/14 3:50:30.190 PM Solar Service[233]: device: E97752AB battery capacity: 100%
2/26/14 3:50:31.080 PM com.apple.WebKit.Networking[374]: CFNetwork SSLHandshake failed (-9806)
2/26/14 3:50:31.080 PM com.apple.WebKit.Networking[374]: NSURLConnection/CFURLConnection HTTP load failed (kCFStreamErrorDomainSSL, -9806)
2/26/14 3:51:57.492 PM xpcproxy[972]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/26/14 3:52:00.085 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:52:00.085 PM Solar Service[233]: End of data
2/26/14 3:52:00.085 PM Solar Service[233]: Event = b device index = 1
2/26/14 3:52:00.086 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): m_LastAveBattLvl 100.00
2/26/14 3:52:00.086 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): old_state 1 new_state 1
2/26/14 3:52:00.086 PM Solar Service[233]: x4301_ShrinkDetailedLog(): filein size 1838954
2/26/14 3:52:00.086 PM Solar Service[233]: device: E97752AB battery capacity: 100%
2/26/14 3:53:30.175 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:53:30.175 PM Solar Service[233]: End of data
2/26/14 3:53:30.176 PM Solar Service[233]: Event = 41 device index = 1
2/26/14 3:54:22.003 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:54:22.004 PM Solar Service[233]: End of data
2/26/14 3:54:22.004 PM Solar Service[233]: Event = 41 device index = 1
2/26/14 3:54:22.007 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:54:22.008 PM Solar Service[233]: End of data
2/26/14 3:54:22.023 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:54:22.024 PM Solar Service[233]: End of data
2/26/14 3:54:22.024 PM Solar Service[233]: Event = b device index = 1
2/26/14 3:54:22.024 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): m_LastAveBattLvl 100.00
2/26/14 3:54:22.025 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): old_state 1 new_state 1
2/26/14 3:54:22.025 PM Solar Service[233]: x4301_ShrinkDetailedLog(): filein size 1839071
2/26/14 3:54:22.025 PM Solar Service[233]: device: E97752AB battery capacity: 100%
2/26/14 3:54:23.003 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:54:23.004 PM Solar Service[233]: End of data
2/26/14 3:54:23.004 PM Solar Service[233]: Event = b device index = 1
2/26/14 3:54:23.004 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): m_LastAveBattLvl 100.00
2/26/14 3:54:23.006 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): old_state 1 new_state 1
2/26/14 3:54:23.022 PM Solar Service[233]: x4301_ShrinkDetailedLog(): filein size 1839110
2/26/14 3:54:23.023 PM Solar Service[233]: device: E97752AB battery capacity: 100%
2/26/14 3:54:24.478 PM com.apple.SecurityServer[16]: Session 100027 created
2/26/14 3:54:25.448 PM com.apple.IconServicesAgent[236]: main Failed to composit image for binding VariantBinding [0x45d] flags: 0x8 binding: FileInfoBinding [0x637] - extension: mp3, UTI: public.mp3, fileType: MPG3.
2/26/14 3:54:25.449 PM quicklookd[930]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xe03] flags: 0x8 binding: FileInfoBinding [0xd03] - extension: mp3, UTI: public.mp3, fileType: MPG3 request size:16 scale: 1
2/26/14 3:54:35.802 PM QuickLookUIHelper[979]: [QL] After retry, preview was from a different type for <QLPreview 0x7f8fe2cccd90 40451 file:///Users/ralph/Desktop/Recordings/Other%20Recordings.numbers>
2/26/14 3:55:47.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 3:55:47.810 PM mds[37]: (Warning) Volume: vsd:0x7fd9e9094400 Open failed. failureCount:6 {
DisabledRecycleCount = 6;
2/26/14 3:55:52.894 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:55:52.894 PM Solar Service[233]: End of data
2/26/14 3:55:52.895 PM Solar Service[233]: Event = b device index = 1
2/26/14 3:55:52.896 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): m_LastAveBattLvl 100.00
2/26/14 3:55:52.896 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): old_state 1 new_state 1
2/26/14 3:55:52.897 PM Solar Service[233]: x4301_ShrinkDetailedLog(): filein size 1839149
2/26/14 3:55:52.898 PM Solar Service[233]: device: E97752AB battery capacity: 100%
2/26/14 3:56:27.078 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:56:27.078 PM Solar Service[233]: End of data
2/26/14 3:56:27.078 PM Solar Service[233]: Event = 41 device index = 1
2/26/14 3:57:30.913 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:57:30.913 PM Solar Service[233]: End of data
2/26/14 3:57:30.913 PM Solar Service[233]: Event = 41 device index = 1
2/26/14 3:57:30.917 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:57:30.917 PM Solar Service[233]: End of data
2/26/14 3:57:30.933 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:57:31.040 PM Solar Service[233]: End of data
2/26/14 3:57:31.040 PM Solar Service[233]: Event = b device index = 1
2/26/14 3:57:31.040 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): m_LastAveBattLvl 100.00
2/26/14 3:57:31.041 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): old_state 1 new_state 1
2/26/14 3:57:31.041 PM Solar Service[233]: x4301_ShrinkDetailedLog(): filein size 1839266
2/26/14 3:57:31.041 PM Solar Service[233]: device: E97752AB battery capacity: 100%
2/26/14 3:58:27.832 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:58:27.833 PM Solar Service[233]: End of data
2/26/14 3:58:27.833 PM Solar Service[233]: Event = b device index = 1
2/26/14 3:58:27.833 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): m_LastAveBattLvl 100.00
2/26/14 3:58:27.834 PM Solar Service[233]: ModuleFeature_x4301::BatteryLightFsm_2(): old_state 1 new_state 1
2/26/14 3:58:27.835 PM Solar Service[233]: x4301_ShrinkDetailedLog(): filein size 1839305
2/26/14 3:58:27.835 PM Solar Service[233]: device: E97752AB battery capacity: 100%
2/26/14 3:59:34.963 PM Solar Service[233]: Input data callback for device 0x7f7c0
2/26/14 3:59:34.963 PM Solar Service[233]: End of data
2/26/14 3:59:34.964 PM Solar Service[233]: Event = 41 device index = 1
2/26/14 4:00:18.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=987[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/26/14 4:09:59.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 4:10:26.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 4:11:07.333 PM xpcproxy[995]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/26/14 4:11:50.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 4:11:51.405 PM mds[37]: (Warning) Volume: vsd:0x7fd9e89c3600 Open failed. failureCount:7 {
DisabledRecycleCount = 7;
2/26/14 4:24:55.677 PM WindowServer[123]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x7fb535055520(2001)
2/26/14 4:24:55.728 PM WindowServer[123]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x7fb535055520(2001)
2/26/14 4:34:54.415 PM mds[37]: (Normal) DiskStore: Starting health check...
2/26/14 4:34:54.416 PM mds[37]: (Normal) DiskStore: Starting health check...
2/26/14 4:34:54.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 4:38:38.350 PM com.apple.backupd[1023]: Starting automatic backup
2/26/14 4:38:38.784 PM com.apple.backupd[1023]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/26/14 4:38:39.457 PM com.apple.backupd[1023]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/26/14 4:38:39.468 PM com.apple.backupd[1023]: Backup failed with error 2: 2
2/26/14 4:43:51.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 4:43:51.994 PM mds[37]: (Warning) Volume: vsd:0x7fd9e88a9a00 Open failed. failureCount:8 {
DisabledRecycleCount = 8;
2/26/14 4:48:54.621 PM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/26/14 4:59:00.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1042[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/26/14 5:13:57.012 PM xpcproxy[1056]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/26/14 5:14:42.197 PM ntpd[127]: SYNC state ignoring +0.694598 s
2/26/14 5:28:16.636 PM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/26/14 5:39:25.763 PM com.apple.backupd[1082]: Starting automatic backup
2/26/14 5:39:25.802 PM com.apple.backupd[1082]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/26/14 5:39:25.891 PM com.apple.backupd[1082]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/26/14 5:39:25.897 PM com.apple.backupd[1082]: Backup failed with error 2: 2
2/26/14 5:47:52.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 5:47:52.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 5:47:52.752 PM mds[37]: (Warning) Volume: vsd:0x7fd9e8a0a000 Open failed. failureCount:9 {
DisabledRecycleCount = 9;
2/26/14 5:57:43.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1099[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/26/14 6:00:05.544 PM ntpd[127]: ntpd: time set +0.876935 s
2/26/14 6:00:05.577 PM com.apple.time[163]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2/26/14 6:00:05.582 PM com.apple.time[163]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2/26/14 6:15:17.606 PM xpcproxy[1116]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/26/14 6:18:30.077 PM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/26/14 6:28:58.074 PM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/26/14 6:40:03.648 PM com.apple.backupd[1137]: Starting automatic backup
2/26/14 6:40:03.688 PM com.apple.backupd[1137]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/26/14 6:40:03.780 PM com.apple.backupd[1137]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/26/14 6:40:03.790 PM com.apple.backupd[1137]: Backup failed with error 2: 2
2/26/14 6:48:03.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 6:48:03.531 PM mds[37]: (Warning) Volume: vsd:0x7fd9e9210200 Open failed. failureCount:10 {
DisabledRecycleCount = 10;
2/26/14 6:56:26.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1149[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/26/14 7:14:38.029 PM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/26/14 7:16:49.993 PM xpcproxy[1164]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/26/14 7:32:49.062 PM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/26/14 7:40:41.407 PM com.apple.backupd[1186]: Starting automatic backup
2/26/14 7:40:41.445 PM com.apple.backupd[1186]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/26/14 7:40:41.549 PM com.apple.backupd[1186]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/26/14 7:40:41.560 PM com.apple.backupd[1186]: Backup failed with error 2: 2
2/26/14 7:48:03.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 7:48:03.859 PM mds[37]: (Warning) Volume: vsd:0x7fd9e88a9000 Open failed. failureCount:11 {
DisabledRecycleCount = 11;
2/26/14 7:55:09.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1201[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/26/14 8:08:51.429 PM parentalcontrolsd[1215]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
2/26/14 8:09:22.507 PM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/26/14 8:18:41.418 PM xpcproxy[1222]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/26/14 8:41:27.086 PM com.apple.backupd[1242]: Starting automatic backup
2/26/14 8:41:27.120 PM com.apple.backupd[1242]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/26/14 8:41:27.184 PM com.apple.backupd[1242]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/26/14 8:41:27.194 PM com.apple.backupd[1242]: Backup failed with error 2: 2
2/26/14 8:48:03.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 8:48:04.115 PM mds[37]: (Warning) Volume: vsd:0x7fd9e9349200 Open failed. failureCount:12 {
DisabledRecycleCount = 12;
2/26/14 8:53:51.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1256[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/26/14 9:19:51.011 PM xpcproxy[1282]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/26/14 9:42:06.000 PM com.apple.backupd[1301]: Starting automatic backup
2/26/14 9:42:06.041 PM com.apple.backupd[1301]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/26/14 9:42:06.142 PM com.apple.backupd[1301]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/26/14 9:42:06.154 PM com.apple.backupd[1301]: Backup failed with error 2: 2
2/26/14 9:43:06.034 PM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/26/14 9:48:03.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 9:48:04.371 PM mds[37]: (Warning) Volume: vsd:0x7fd9e9348400 Open failed. failureCount:13 {
DisabledRecycleCount = 13;
2/26/14 9:52:34.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1313[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/26/14 10:19:51.441 PM ntpd[127]: SYNC state ignoring +0.974725 s
2/26/14 10:21:31.002 PM xpcproxy[1339]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/26/14 10:42:36.896 PM com.apple.backupd[1361]: Starting automatic backup
2/26/14 10:42:36.936 PM com.apple.backupd[1361]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/26/14 10:42:37.034 PM com.apple.backupd[1361]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/26/14 10:42:37.045 PM com.apple.backupd[1361]: Backup failed with error 2: 2
2/26/14 10:48:07.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 10:48:07.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 10:48:08.261 PM mds[37]: (Warning) Volume: vsd:0x7fd9e9126e00 Open failed. failureCount:14 {
DisabledRecycleCount = 14;
2/26/14 10:51:17.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1369[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/26/14 11:05:43.149 PM ntpd[127]: ntpd: time set +1.179565 s
2/26/14 11:05:43.178 PM com.apple.time[163]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2/26/14 11:23:21.954 PM xpcproxy[1392]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/26/14 11:43:16.287 PM com.apple.backupd[1406]: Starting automatic backup
2/26/14 11:43:16.335 PM com.apple.backupd[1406]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/26/14 11:43:16.433 PM com.apple.backupd[1406]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/26/14 11:43:16.444 PM com.apple.backupd[1406]: Backup failed with error 2: 2
2/26/14 11:48:09.000 PM kernel[0]: disk1s2: I/O error.
2/26/14 11:48:09.696 PM mds[37]: (Warning) Volume: vsd:0x7fd9e9126000 Open failed. failureCount:15 {
DisabledRecycleCount = 15;
2/26/14 11:50:00.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1415[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/26/14 11:58:41.628 PM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/27/14 12:06:57.808 AM MacKeeper Helper[220]: Firewall built-in hosts update finished successfully.
2/27/14 12:16:01.294 AM spindump[1436]: Invalid connection: com.apple.coresymbolicationd
2/27/14 12:17:28.821 AM spindump[1436]: Saved diag report for powerstats version com.apple.SystemStats.Daily to /Library/Logs/DiagnosticReports/powerstats_2014-02-27-001728_Macintosh.diag
2/27/14 12:24:35.673 AM xpcproxy[1445]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/27/14 12:43:56.053 AM com.apple.backupd[1462]: Starting automatic backup
2/27/14 12:43:56.480 AM com.apple.backupd[1462]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/27/14 12:43:57.065 AM com.apple.backupd[1462]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/27/14 12:43:57.078 AM com.apple.backupd[1462]: Backup failed with error 2: 2
2/27/14 12:48:09.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 12:48:09.953 AM mds[37]: (Warning) Volume: vsd:0x7fd9e8a01600 Open failed. failureCount:16 {
DisabledRecycleCount = 16;
2/27/14 12:48:43.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1470[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/27/14 12:55:28.762 AM SubmitDiagInfo[1478]: Removed expired file file:///Users/ralph/Library/Logs/DiagnosticReports/DashlaneAgent_2014-01-27-164 152_Macintosh.crash
2/27/14 12:55:28.763 AM SubmitDiagInfo[1478]: Removed expired plist file file:///Users/ralph/Library/Logs/DiagnosticReports/.DashlaneAgent_2014-01-27-16 4152_Macintosh.crash.plist
2/27/14 12:55:28.764 AM SubmitDiagInfo[1478]: Removed expired file file:///Users/ralph/Library/Logs/DiagnosticReports/DashlaneAgent_2014-01-27-164 155_Macintosh.crash
2/27/14 12:55:28.765 AM SubmitDiagInfo[1478]: Removed expired plist file file:///Users/ralph/Library/Logs/DiagnosticReports/.DashlaneAgent_2014-01-27-16 4155_Macintosh.crash.plist
2/27/14 12:55:28.766 AM SubmitDiagInfo[1478]: Removed expired file file:///Users/ralph/Library/Logs/DiagnosticReports/DashlaneAgent_2014-01-27-164 215_Macintosh.crash
2/27/14 12:55:28.766 AM SubmitDiagInfo[1478]: Removed expired plist file file:///Users/ralph/Library/Logs/DiagnosticReports/.DashlaneAgent_2014-01-27-16 4215_Macintosh.crash.plist
2/27/14 12:55:28.807 AM SubmitDiagInfo[1478]: Removed expired file file:///Users/ralph/Library/Logs/DiagnosticReports/DashlaneAgent_2014-01-27-164 219_Macintosh.crash
2/27/14 12:55:28.808 AM SubmitDiagInfo[1478]: Removed expired plist file file:///Users/ralph/Library/Logs/DiagnosticReports/.DashlaneAgent_2014-01-27-16 4219_Macintosh.crash.plist
2/27/14 12:55:28.816 AM SubmitDiagInfo[1478]: Removed expired file file:///Users/ralph/Library/Logs/DiagnosticReports/DashlaneAgent_2014-01-27-164 233_Macintosh.crash
2/27/14 12:55:28.816 AM SubmitDiagInfo[1478]: Removed expired plist file file:///Users/ralph/Library/Logs/DiagnosticReports/.DashlaneAgent_2014-01-27-16 4233_Macintosh.crash.plist
2/27/14 12:55:48.000 AM kernel[0]: disk1s1: I/O error.
2/27/14 1:26:10.508 AM xpcproxy[1527]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/27/14 1:44:43.678 AM com.apple.backupd[1544]: Starting automatic backup
2/27/14 1:44:43.718 AM com.apple.backupd[1544]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/27/14 1:44:43.814 AM com.apple.backupd[1544]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/27/14 1:44:43.824 AM com.apple.backupd[1544]: Backup failed with error 2: 2
2/27/14 1:47:26.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1549[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/27/14 1:48:22.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 1:48:22.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 1:48:22.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 1:48:22.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 1:48:22.897 AM mds[37]: (Warning) Volume: vsd:0x7fd9e8925000 Open failed. failureCount:17 {
DisabledRecycleCount = 17;
2/27/14 2:10:02.088 AM parentalcontrolsd[1572]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
2/27/14 2:28:11.131 AM xpcproxy[1584]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/27/14 2:45:29.186 AM com.apple.backupd[1600]: Starting automatic backup
2/27/14 2:45:29.222 AM com.apple.backupd[1600]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/27/14 2:45:29.282 AM com.apple.backupd[1600]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/27/14 2:45:29.292 AM com.apple.backupd[1600]: Backup failed with error 2: 2
2/27/14 2:46:08.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1603[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/27/14 2:48:22.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 2:48:22.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 2:48:22.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 2:48:23.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 2:48:23.153 AM mds[37]: (Warning) Volume: vsd:0x7fd9e8a0ca00 Open failed. failureCount:18 {
DisabledRecycleCount = 18;
2/27/14 3:05:16.512 AM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/27/14 3:29:58.831 AM xpcproxy[1648]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/27/14 3:33:02.478 AM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/27/14 3:44:51.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1662[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/27/14 3:46:02.476 AM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/27/14 3:46:02.906 AM com.apple.backupd[1667]: Starting automatic backup
2/27/14 3:46:02.948 AM com.apple.backupd[1667]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/27/14 3:46:03.420 AM com.apple.backupd[1667]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/27/14 3:46:03.431 AM com.apple.backupd[1667]: Backup failed with error 2: 2
2/27/14 3:48:26.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 3:48:27.172 AM mds[37]: (Warning) Volume: vsd:0x7fd9e9228200 Open failed. failureCount:19 {
DisabledRecycleCount = 19;
2/27/14 3:51:02.536 AM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/27/14 4:15:10.535 AM secd[244]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/27/14 4:15:10.535 AM secd[244]: securityd_xpc_dictionary_handler EscrowSecurityAl[655] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/27/14 4:16:04.424 AM WindowServer[123]: _CGXHWCaptureWindowList: No capable active display found.
2/27/14 4:30:30.428 AM CalendarAgent[197]: AOSKit ERROR: XPC CLIENT: Connection [0x7ff09372dbf0] event handler received event with type: [XPC_TYPE_ERROR]. Description: [Connection interrupted]
2/27/14 4:30:36.298 AM xpcproxy[1707]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/27/14 4:43:34.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1718[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/27/14 4:46:53.128 AM com.apple.backupd[1722]: Starting automatic backup
2/27/14 4:46:53.559 AM com.apple.backupd[1722]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/27/14 4:46:53.641 AM com.apple.backupd[1722]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/27/14 4:46:53.651 AM com.apple.backupd[1722]: Backup failed with error 2: 2
2/27/14 4:48:36.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 4:48:36.972 AM mds[37]: (Warning) Volume: vsd:0x7fd9e9196000 Open failed. failureCount:20 {
DisabledRecycleCount = 20;
2/27/14 5:30:22.195 AM ntpd[127]: SYNC state ignoring +1.578042 s
2/27/14 5:32:58.772 AM xpcproxy[1781]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/27/14 5:42:16.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1791[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/27/14 5:47:34.619 AM com.apple.backupd[1798]: Starting automatic backup
2/27/14 5:47:34.663 AM com.apple.backupd[1798]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/27/14 5:47:34.712 AM com.apple.backupd[1798]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/27/14 5:47:34.721 AM com.apple.backupd[1798]: Backup failed with error 2: 2
2/27/14 5:48:37.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 5:48:37.608 AM mds[37]: (Warning) Volume: vsd:0x7fd9e88aa400 Open failed. failureCount:21 {
DisabledRecycleCount = 21;
2/27/14 6:13:51.820 AM ntpd[127]: ntpd: time set +1.631360 s
2/27/14 6:13:51.851 AM com.apple.time[163]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2/27/14 6:13:51.855 AM com.apple.time[163]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2/27/14 6:34:31.646 AM xpcproxy[1858]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/27/14 6:41:00.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1870[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/27/14 6:48:15.112 AM com.apple.backupd[1876]: Starting automatic backup
2/27/14 6:48:15.153 AM com.apple.backupd[1876]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/27/14 6:48:15.253 AM com.apple.backupd[1876]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/27/14 6:48:15.264 AM com.apple.backupd[1876]: Backup failed with error 2: 2
2/27/14 6:48:55.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 6:48:56.316 AM mds[37]: (Warning) Volume: vsd:0x7fd9e89f4400 Open failed. failureCount:22 {
DisabledRecycleCount = 22;
2/27/14 7:31:06.353 AM periodic-wrapper[674]: Running daily periodic task.
2/27/14 7:36:21.244 AM xpcproxy[2000]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/27/14 7:39:43.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=2001[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/27/14 7:48:50.741 AM com.apple.backupd[2018]: Starting automatic backup
2/27/14 7:48:50.784 AM com.apple.backupd[2018]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/27/14 7:48:50.874 AM com.apple.backupd[2018]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/27/14 7:48:50.885 AM com.apple.backupd[2018]: Backup failed with error 2: 2
2/27/14 7:48:56.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 7:48:56.795 AM mds[37]: (Warning) Volume: vsd:0x7fd9e8977200 Open failed. failureCount:23 {
DisabledRecycleCount = 23;
2/27/14 8:11:38.000 AM kernel[0]: hfs: mounted Recovery HD on device disk0s3
2/27/14 8:11:38.546 AM mds[37]: (Normal) Volume: volume:0x7fd9e8967e00 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
2/27/14 8:11:38.662 AM fseventsd[47]: Logging disabled completely for device:1: /Volumes/Recovery HD
2/27/14 8:11:38.000 AM kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
2/27/14 8:12:46.247 AM com.apple.authd[76]: Sandbox denied authorizing right 'system.install.app-store-software.standard-user' for authorization created by '/System/Library/CoreServices/Software Update.app/Contents/Resources/SoftwareUpdateConfigData' [2068]
2/27/14 8:12:46.274 AM sandboxd[142]: ([2068]) SoftwareUpdateCo(2068) deny authorization-right-obtain system.install.app-store-software.standard-user
2/27/14 8:14:36.729 AM com.apple.SecurityServer[16]: Killing auth hosts
2/27/14 8:14:36.729 AM com.apple.SecurityServer[16]: Session 100027 destroyed
2/27/14 8:14:41.208 AM Solar Service[233]: notification user info:{
NSApplicationBundleIdentifier = "com.apple.iWork.Pages";
NSApplicationName = Pages;
NSApplicationPath = "/Applications/Pages.app";
NSApplicationProcessIdentifier = 766;
NSApplicationProcessSerialNumberHigh = 0;
NSApplicationProcessSerialNumberLow = 409700;
NSWorkspaceApplicationKey = <NSRunningApplication: 0x6000001178e0 (com.apple.iWork.Pages - 766)>;
NSWorkspaceExitStatusKey = 0;
2/27/14 8:15:03.579 AM parentalcontrolsd[2085]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
2/27/14 8:38:26.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=2114[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
2/27/14 8:38:27.667 AM xpcproxy[2117]: assertion failed: 13C64: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
2/27/14 8:48:56.000 AM kernel[0]: disk1s2: I/O error.
2/27/14 8:48:57.204 AM mds[37]: (Warning) Volume: vsd:0x7fd9e8912e00 Open failed. failureCount:24 {
DisabledRecycleCount = 24;
2/27/14 8:49:27.675 AM com.apple.backupd[2136]: Starting automatic backup
2/27/14 8:49:27.904 AM com.apple.backupd[2136]: Backing up to /dev/disk1s2: /Volumes/Time Machine Backups/Backups.backupdb
2/27/14 8:49:28.516 AM com.apple.backupd[2136]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Time Machine Backups/Backups.backupdb/Macintosh size:37
2/27/14 8:49:28.527 AM com.apple.backupd[2136]: Backup failed with error 2: -
HP G62-348CA number keys and arrow keys not working
Good day Experts! Can someone help me fix my laptop? I got G62-348CA unit. only number 5 and 6 in my number keys are working and also arrow keys down and right are not functioning. at first it was built with windows 7 home premium 64bit but then i have to reformat my laptop with windows 7 ultimate but i dont have available 64bit so i install 32bit of the OS. before i install the OS, number keys and arrow keys are working fine but after I reformat my laptop with ultimate 32bit, the said keys are not working. please guys help me. im having trouble with my unit and i dont know what to do. its pretty bad i dont have any idea. all the best with you guys and i'm hoping for your fast and kind response. thank you!
Because the operating system does not affect the keyboard in that way . .. If the operating system has issues it would switch keys or assign wrong characters.
I have replaced over 200 keyboards because of such issues -
My "9-o-l-." keys stop working after startup, and spreading! ahh help?
My "9-O-L-." keys stop working after startup and my arrow keys too.
Sometimes when I start up the keys will work for a bit then one by one stop functioning and then randomly work every so often, then it seems to "spread" to the right shift key, and sometimes the "8-I-K-," keys.
Around the same time when this all began my Battery completely stopped working too, does this have anything to do with it? I've reset my PRAM and no luck.
I'm planning on replacing the keyboard, will that fix the problem? or is it something deeper?
Thanks in advance!
-AndrewI assume you've rebooted? Can you control the computer well enough to make a new account and log into it? Doubt this will fix it but maybe. The keyboard may need replacing but it might also be that the cable has worked loose so that some of the wires have disconnected but not all. Sounds like a trip or call to Apple is in order.
-
Nano quit working after update to version 1.2
Brand new nano quit working after update to version 1.2 It worked fine before. My computer see usb storage device but doesn't recognise ipod. ipod updater that worked to let me update doesnt regonise nano either. I returned to store where I bought it, got a new one, brought it home, ran updater again now it the new one is doing the same thing. What gives? I have never had a problem in the past with updater. Is there any way to take it back to version 1.1 since 1.2 doesn't work?
This fix came from Caspar (Thank you SOOO much!). It took me 10 minutes to do this and now my beloved ipod nano is back! Hopefully this will help some of you:
Original Problem: Updated iTunes(6.0.5) and iPod nano (1.2). After the update, iTunes would not recognize my iPod and therefore would not let me remove the iPod from my computer, which seems to be the problem most people are having.
The Fix:
*uninstall iTunes, iPod, and any updates (make sure anything related to these two programs are not on your computer)
*Open Control Panel
*Click the "switch to classic view" link, if
necessary
*Double click "administrative tools"
*Double click "computer management"
*Under "storage" click on "disk management"
*Find your iPod's listing
*Right-click on it and click "format"
*Select "FAT32" and start the format
*After reformatting, remove iPod from computer
*Download iTunes directly from the Apple website (I didn't restart my computer at the prompt)
*Download 6/28/06 update for iPod (do NOT plug iPod in before doing this!)
*Open update for iPod and wait until prompt to plug iPod in (do not plug in early)
*Wait for the update....and there ya have it!!
Hopefully this will help some people, as I have spent the past 2 weeks doing the 5R's thing. After completing the steps above, I haven't had a problem with my iPod..and now my Nike+ works!! Thanks again, Caspar...you're a genius!!
p.s. if this helps, please repost this message to others who have the same problem as we do... -
I've seen multiple posts recently about arrow keys stop working. This just happend to me however i found the solution.
Hold down all four (4) arrow keys and a menu will pop up.
Then select charcters by clicking (i believe) the right arrow.
Hope this helps.Hi Ken,
Thanks for posting in MSDN forum.
Since the issue is more relate to the end-user, I'd like to move it to Excel IT pro forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Reader got "not responding" for a minute after click a hyperlink in PDF document
Hi. Anyone got similar experience that the Reader hanged for a while after clicked a hyperlink (to an internal website)? From the NetMon trace, it showed that the Reader made query to our internal DNS with an unknown FQDN (just "com.hk"), then waited for time-out and came back the response. Want to know the mechanism how and why it makes such query. My Acrobat Reader is in version 10.1.3.
Hi,
To use Network Diagnostics:
Choose Apple menu > System Preferences > Network
Click Diagnostics to open Network Diagnostics, and then follow the onscreen instructions.
Carolyn -
Some keybaord keys not working after suspect virus on Tecra A
Apostrophe, delete, semicolon and end keys not working after a suspected virus attack. I found record of the same problem on the net but apparently this guy fixed his problem after he found scroll lock or num lock on.
This is not the case here but there is something going on with numlock - register shows 2 and not 0. change to 0 but when reboot back to 2 again.
Suspect changed back by bios. I thought i couldnt get to bios because DEL key not working but found ESC works.
Tried to reset default values for bios but then cannot save and exit as this required the END key to work.
I was running XP at the time of the (suspected) attack and could not rectify the problem so put the computer back to the OEM status which i hoped would help - it did not, same problem so rather than install all the software on the computer again with XP i upgraded to Windows7 - fresh install.
Still keys do not work - it was a real pain to start with as my computer was set up to ctl+alt+del to log in and i had to do this with on screen keyboard - XP - this also showed that numlock was on before and after windows boot.
The reason i suspect a virus - my wife was watching one of her tv shows on line from home country (another toshiba laptop) and i needed to use that laptop for something else so i asked her to use mine - later on we turned the laptops off and in the morning turned tham back on again, the other laptop with AVG virus protection flagged several hits and this one with (FAMOUS and completely up to date) Norton flagged nothing - once i got into it using on screen keyboard.
Problems with this computer was found after scanning with a different antivirus.
Anyway - i am left with 4 keys that do not work on my keyboard (actually they did work after i logged into the computer for the first time but i had to hold them in for a long time - and then next time i rebooted, not work at all and havent ever since)
Any assistance here would be greatly appreciated, i have been working on this all weekend with no joy at all.
Thanks in advance.Thanks Xardas,
I have essentially done both - tried Toshiba OEM status found on a small partition of the toshi hard drive - no good - then did a fresh install of Windows 7 - still no good
You know - as cunning as it sounds - i cannot reload the default settings in BIOS as it requires the END key to work so i can Save & Exit - all i can do is Exit Without Save - i sort of feel snookered at the moment.
Toshiba got back to me today and said that i have tried everything they would have (yeah for sure) and to take my machine into a service centre for a hardware check - yeah right on boys!
Check out this guys post below found on Kioskea.net - getting close to a year ago...
ms ml - Nov 10, 2009 12:52am GMT
Hi there, I was hoping that you might be able to help me with the problem that I seem to be having with my Toshiba Satellite Laptop Keyboard too. For a few days now I havent been able to use a few of the keys on my keyboard, including (1) delete (the backspace key is still working though), (2) colon/semicolon, (3) apostrophe/quotation marks and (4) end (the home and PgUp and PgDn keys are still working though). Any suggestions?
Identical to my problem....obviously this guy had the same problem as well...see below - same thread.
yab - Feb 9, 2010 4:47am GMT
hi did you ever figure this out? i have the same exact problem...
However, i was not able to solve my problem the way this guy did - my scroll lock is not activated - it seems to work ok (on and off) i tested it using Excel to move around the cells.
yab ms ml - Feb 9, 2010 7:57am GMT
Nevermind. For me it was scroll lock. My apostrophe, semicolon, and delete keys are alive and working again. I hope you have the same easy fix.
Incidently - never hear from the first guy again - probably ended up being his scroll lock.
all sugestions welcome - sorry my smily face has no eyes -) guess why! -
Why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
why my hp mini 5101 the "7" key doesnt work after upgraded the bios?
The current bios version is F.07korpx,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
My iTunes quit working after the most recent update. Re-installed as instructed without any success. Error message APSDaemon.exe MSVCR80.dll was not found. Reported as error 7 (Windows error 126)
Doublechecking. Have you tried the following user tip?
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
Hi I don't know since when, but I can't send email anymore via iCloud on my Mac. iPhone and iPad work. Online iCloud as well. I am running: OS X 10.9.2 Mail 7.2 (1874) I use the @me.com adresses smtp Server says: iCloud(iCloud) What I tried so far: I
-
Logging the information from multiple tables to a txt file
To All, I am working in a bench test set in which I test different devices via serial. For each of them, I have a log table. Is there a way I could log all those tables in a singe text file? Thank you, Cosmica Solved! Go to Solution.
-
HT4623 my I tunes file is corrupt how do i get a new version to download to my home computer?
The I-Phone file on my home computer is corrupt! Where do I get a new version to download?
-
Hascode without instance variable: Urgent
Hi All I have to write hashCode() method correspond to the equals() method in the same class. But I dont have any class level variable in this class, I am not able to generate the hashCode() method automatically from Eclise. My equals method looks li
-
Header description of a table is showing a '+' in SM30 not the description
Hi guys, we have created a table zmert, but in SM30 the header description is not showing... instead a plus sign is showing... what's wrong? thanks!