Arrrgh, two hours and still "Completing Activation"...

The subject pretty well says it all, got the iPhone 4 this afternoon and
after starting the Activation process it has been sitting there with
"Transfer of you existing phone number is in progress"
for at least 2 hours.
Should I unplug and try again?
Jerry

try rebooting the phone. mine was stuck on " completing activation" for a little bit and then i unplugged and rebooted. it was activated once i turned the phone back on. good luck!

Similar Messages

  • How long should it take to convert an 80 page doc?  It's been two hours and still not working

    how long should it take to convert an 80 page doc?  It's been two hours and still not working

    Hi Mary,
    I apologize for the delay. What size if your document? There is a 100MB limit.
    Let me know!
    Looking forward to hearing back from you.
    Kind regards, Stacy

  • 30  hours and still no activation

    Try and activated over wifi and 3g, i get the message "This iPhone is not recognized and cannot be activated for service.  Please visit your nearest Apple store for more information"  The biggest problem is that I am atleast 6 Hours from any Apple store.  There is not a store in my state!!!!! Oh how Im missing my Galaxy S!!!!  PLEASE HELP

    ok, my girlfriend brought hers over and we had it activated in no time, i popped my sim card in her phone and boom, worked perfectly in her 4s, so this has to now be an apple issue!!!!!

  • I purchased a book through iTunes and it downloaded. I synced with my iPad. It shows the book is downloading but that has been going on for two hours and i still can't open the book.

    I purchased a book through iTunes. I then synced my iPad and went to iBooks. I clicked on the book and it shows downloading but that has been going on for almost two hours and i still can't open the book. What gives? I have done this before no problem.

    Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that book, click the arrow to the left of it, click the 'Report a Problem' button :
    and then the 'Report a Problem' link on its line :
    and select 'inadvertently purchased' as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).
    Or you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • My mac hung up while installing an update. It took hours and still did not complete the update. I restarted my mac. Upon turning it back on, a wheel has been spinning on a grey screen. I tried to reinstall OS X from utilities, but encounter an error. Why?

    My mac hung up while installing an update. It took hours and still did not complete the update. I restarted my mac. Upon turning it back on, a wheel has been spinning on a grey screen. I tried to reinstall OS X from utilities, but encounter an error. What do I do?

    Hey Manaskala,
    First point of call on all grey screen issues is the following:
    http://support.apple.com/kb/TS2570
    Given this issue has appeared after a software update, I'd advise you do the following instead though:
    1. Get an external hard drive, with enough space to put the entire hard drive of your Mac onto. Make sure you've safely copied any data you have off of it, as the next step will erase it.
    2. In the recovery HD of your machine, use Disk Utility to format you EXTERNAL hard drive with the partition table as GUID, and the format as Mac OS Extended (Journaled).
    3. Get out of Disk Utility, and click Reinstall Mac OS X.
    4. When asked where, choose to install onto your external hard drive.
    5. When the download and installation is complete, your Mac will reboot into a clean fresh setup screen. Make your user account an administrator, and make up a name and password; I use 'Test' and 'test'.
    6. Your machine is now running from the external hard drive, not the internal hard drive, so don't be alarmed when you don't see your files.
    7. Open the finder, you should see 'Macintosh HD' in the sidebar. This is the internal hard drive of your computer.
    8. Open Macintosh HD, and copy out the following folders into a new folder on your desktop:
    -Users.
    -Applications.
    -Library. (This only needs to be done if you use 3rd party software that saves things in the /Library, do a quick google and see if it does e.g. Photoshop, Protools).
    9. When these have copied (it'll take quiet a while), you can now use Disk Utility to erase your hard drive. Don't erase Macintosh HD but the ENTIRE hard drive on the inside of your Mac, and as Thomas A Reed mentioned, there was likely an existing issue on your HDD so please go to Security Options and choose 'Zero Out' before clicking erase. This will rebuild the partition table which was a possible cause of the failed update.
    10. Reboot the machine holding 'Option', go to recovery HD.
    11. Choose 'Reinstall Mac OS X', this time onto your INTERNAL hard drive.
    12. When this is complete, make another admin user called test and password test, like you did last time.
    13. Run Software Update from the  menu of your Mac.
    14. In the Finder, you should see your external Hard Drive. open it up, inside that you should see your desktop etc, and on the desktop will be your folder containing Library, Applications and Users.
    15. Go to Finder up next to the  and choose File -> New Finder Window.
    16. In your second finder window, open up Macintosh HD (through the Go -> Computer menu), and go to your Users folder.
    17. Open the Users folder in your first finder window, and copy your user folder (has your name on it) into the second user folder (the one inside Macintosh HD).
    18. This might take a while.
    19. When complete, go to System Preferences -> Users and Groups and unlock the padlock.
    20. Click the '+' sign, and make a new administrator user.
    21. Now, the fun bit. Note the name of your user folder you copied, e.g. 'Nathan', containing all of your stuff. Note the difference between your user folder (has your name on it) and the Users folder (contains YOUR user folder, guest folder and shared folder).
    22. Make the ACCOUNT NAME of your new adminstrator user the EXACT name of your user folder (normally lower case and without spaces), this is case sensitive folks. Your full name can be whatever you want, usually your full name.
    23. Then click create. You should be informed that a home folder with that name in it already exists in the Users folder, would you like to make your new account from that folder? say YES!
    24. When this is complete, log out of the Test user, log into your new account we've just made, all your stuff should be there.
    25. ???????
    26. Profit.
    There's a few little bits that may need to be cleaned up afterwards, applications folder from your external hard drive should replace the applications folder on your internal hard drive, if the previously mentioned /Library folder contained important goodies then that should replace the /Library folder on your new Mac.
    Hopefully that will help you out, straight after that is done make sure your stuff is there, erase your external hard drive and turn on time machine!

  • TS3682 i earsed my iphone frome icloud and it didn't never work it still loading for 3 hours and still not working ? please help me so fast

    i earsed my iphone frome icloud and it didn't never work it still loading for 3 hours and still not working ? please help me so fast

    First man up and admit, that itunes does not suggest, but tells you that update is available and you made a
    decision to download and update. Once you man up - think if you still under warranty. If that is not security
    software according to the link provided, it is hardware. So second try another network, may be your network
    has additional security or firewall. And third decide if it worth to you pay 149 for that phone or get it replaced.
    Unless your 3gs under warranty.

  • I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on.

    I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on. I've tried the holding of the home and power button but still nothing

    iOS: Not responding or does not turn on - Apple Support
    try this but maybe terminal if no result

  • I need help my iphone 5c has been on charge for 5 hours and still has not turned on past the charging symbol, what can i do? (baring in mind i got this phone 2 days ago brand new.)

    i need help my iphone 5c has been on charge for 5 hours and still has not turned on past the charging symbol, what can i do? (baring in mind i got this phone 2 days ago brand new.)

    Do you see a lightning bolt near the battery , Battery is charging (supposedly(  IF  not return to where  you purchased it  (also make sure that the charger is on)  if still not charging with lighting bolt bring it back

  • Tried to use Iphoto and was told I needed upgrade. Try to install upgrade . Upgrade should take an hour if photo library is large. It's now close to three hours and still upgrading.  Can't use Iphoto and don't want to stop if still upgrading...3hours??

    Tried to use Iphoto and was told I needed upgrade. Try to install upgrade . Upgrade should take an hour if photo library is large. It's now close to three hours and still upgrading.  Can't use Iphoto and don't want to stop if still upgrading...3hours??

    You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
    Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
    If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
    Once you are using the "Firefox" button ...
    Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
    To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
    You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • I did erase my iphone Erase all content and setting since 4 hours  and still it is  loading ??????  what can  i do ?????????????????

    I did Erase  my iphone Erase all content and setting since 4 hours  and still it is  loading ??????
    what can  i do ???????????????
    i am using iphone 4

    Hi soulhaib elroumi,
    If you haven't already done so, does restarting or resetting the iPhone help the issue?
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If not, you may want to restore your iPhone in recovery mode using a computer with iTunes.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • HT4623 I am upgrading my iPad to iOS 7 but the progress bar is at 1/4 position for two hours and not moving forward. Is there any problem with it? What should I do? Thanks.

    I am upgrading my iPad to iOS 7 but the progress bar is at 1/4 position for two hours and not moving forward. Is there any problem with it? What should I do? Thanks.

    This is a concern amoung many corporate users.  It's going to take somekind of policy change with apple.
    Enterprise support:
    Call enterprise support  (866) 752-7753  to create  a case ID number

  • I am trying to delete a User but its nearly taking 24 hours and still doing it

    Hi guys i am new to my Mac book Pro when i migrated my old laptop to this mac book it set up a new user i am now trying to delet this user and its been nearly 24 hours and still says deleting account and i can't seem to do much until its sorted hope you can help

    It takes only a few minutes even if you are delete the User' files.

  • I made erase for all my settings and contents from 8 hours and still now in recovery state ?what shall i do?, i made erase for all my settings and contents from 8 hours and still now in recovery state ?what shall i do?

    i made erase for all my settings and contents from 8 hours and still now in recovery state ?what shall i do?, i made erase for all my settings and contents from 8 hours and still now in recovery state ?what shall i do?

    we have almost similar problem. i also did restored my iphone5. and it keeps restoring after it finishes. what i did was, i disconnected the phone from iTunes and pressed the home & power button, hold it till the apple logo appears. but i will warn you. after i did this, my phone did worked after, but now im having problem with siri and voice command. both keeps on making calls, playing music even the phone is just inside my bag or not using it. when i use the phone, it keep on going home, enabling siri, going to music wihtout touching anything. such a pain in the neck

  • 6 1/2 hours and still NO SERVICE!!

    It's been 6 1/2 hours and still no service!! I can not use my phone for anything!! Is AT&T going to deduct money from my bill for their issues? They charge for using the phone, can I deduct from my bill because I can't use the phone!!!

    Take your phone to an AT&T store and have them check it out.

  • So i got a beats pill and ive been using it for like a month now and the next day i go to turn it on and it wont turn on. so i left it to charge for like 12 hours and still nothing help please:(

    So i got a beats pill and ive been using it for like a month now and the next day i go to turn it on and it wont turn on. so i left it to charge for like 12 hours and still nothing help

    Ask the manufacturer... That's not an Apple product.

Maybe you are looking for

  • HELP PLZ!! i tune wont open at all!

    this is getting so frustrating!! now i have another problem, itune wont even run! it keeps giving a message that quicktime is required to run itunes. i alrready have quick time installed and it still wouldnt run can someone help me please

  • Applying object style to all objects in a project?

    In Cp4, it was possible to change the style of an object and then apply those changes throughout the entire project. How is this accomplished in Cp5? I have set up a default style for captions but it seems like I can only change the style of individu

  • How do I send on GPIB subaddresses?

    I am developing an instrument to replace some legacy HPIB equipment. The original equipment responds to data requests on multiple GPIB subaddresses, in non-System Controller mode. How do I address the (embedded RT) GPIB interface, to set this up? Do

  • SPECIAL1 user defined trigger not firing

    Hi All forms Gurus, I have a need of creating a menu under tools in forms and call another from from this new menu option. I have done the below: on my block I have written a PRE-BLOCK Trigger with the below code: app_special.instantiate('SPECIAL1',

  • URGENT Error while loading locations from R/3 to EBP

    Hi SRM Warriors, I am getting the error message "Error Accessing System XXXXX" while loading location from R/3 system. I was able to load them choosing the "Logical System (Source System)" for my Logical System. However, I need to do the same for my