Article creation
Dear Experts ,
While creating an PO, i am getting an error as follows,
"Article not maintained for the Site"....
Pl let me know the solution to this Error.
Also Hw to configure Site as
1)DC
2)Store
Thanx in advance
wth rgds
SVU123
dear SVU,
First you need to do listing of the article for the site
or check whether Assotrment is maintained or not else use WSOA2 to check assortment
you not only need to maintain assorment n listing also CHECK PROFIT CENTER for site
to attach profit center
go to MM42
give article no, site and select site / plant view
there you can maintain profit center
Similar Messages
-
Function module for Article creation (transaction MM41)
Hello,
I have been trying to create an article which is normally done using transaction MM41.
I am trying to use BAPI_MATERIAL_SAVEDATA to do this, but since article creation is different from regular material creation, there are fields that are not available, for example article category (MARA-ATTYP).
Another problem encountered with the BAPI is that the industry section is a required input. For MM41 it is not a required field.
Therefore, is there an available function module aside from the BAPI mentioned above that can perform article creation?
If the BAPI above is sufficient, how can I properly populate the necessary fields?
Additional information: requirement is developed in 4.6c.
provide the code I've been working on if asked.
Thanks in advance!Hello Harsh
To extend the article to another distribution channel you need to populate the salesdata/salesdatax structures of the BAPI. For example:
CLEAR wa_salesdata.
wa_salesdata-material = material.
wa_salesdata-sales_org = salesorg.
wa_salesdata-distr_chan = dstchan.
wa_salesdata-item_cat = itemcat.
wa_salesdata-matl_stats = '1'.
APPEND wa_salesdata TO i_salesdata.
CLEAR wa_salesdatax.
wa_salesdata-material = material.
wa_salesdata-sales_org = salesorg.
wa_salesdata-distr_chan = dstchan.
wa_salesdatax-item_cat = 'X'.
wa_salesdatax-matl_stats = 'X'.
APPEND wa_salesdatax TO i_salesdatax.
I believe the important data you need to have are material, sales org, and distribution channel.
Hope this helps. -
BAPI for ARTICLE creation in IS-Retail
I am creating an Article using BAPI_MATERIAL_MAINTAINDATA_RT by passing below parameters for Basic view.
1.material type
2.merchandise category
3.material category
4.description
5.uom
6.transportation grp
7.loading grp.
8.valuation class
9.tax class
Also marked X in respective places in structures clientdatax,plantdatax,headdatax etc.
Anyhow still it showing errors like "key field of table MARA missing"
I am able to create article from MM41 using above 9 fields.
What fields shd be passed to this BAPI to create an ARTICLE?
OR ANY OTHER BAPI/RFC FM EXIST TO CREATE ARTICLE?
Please help me in this regard.
Regards,
KiranHi Bjorn,
I have to call BAPI for Article creation from Portal front end.
so I cant use BAPI_RETAILMATERIAL_CREATE as it goes to MM41 when we execute.
So I am using BAPI_MATERIAL_MAINTAINDATA_RT to create article.
I passed all mandatory data which is required to create a article with basic view.
Using MM41, I am able to create but with this BAPI iam unable to create article.
Could you please tell me what are the required parameters to be passed in addition to my fields which I specified below:
I passed
HEADDATA--material type,merch.category, material category,basic view marked x.
MATERIAL DESC--material description
CLIENT DATA--uom,transportation grp, tax class
CLIENTDATAX---marked X in above fields
PLANTDATA-loading grp
PLANTDATAX-marked x for above field
ADDL CLIENTDATA--valuation class
ADDLCLIENTDATAX--marked X for v class
Please help me in this regard.
Regards,
Kiran. -
ARTICLE CREATION-CLARIFICATION
Hi to all,
I need a small clarification on following information.
When we use T.code MM41 for article creation system will show the following things like,article,article type,mc category,article category.
+
Area's of validity
purchasing org
vendor
vendor subrange
sales org
dis,, channel
dis,,center
store
what is the need for this data i.e Area's of validity.use of Area's of validity
purchasing org: An organizational unit in Logistics, subdividing an enterprise according to the requirements of Purchasing.
A purchasing organization procures materials and services, negotiates conditions of purchase with vendors, and is responsible for such transactions.
You specify the form of procurement by assigning purchasing organizations to company codes and plants.
vendor: A business partner from whom article can be procured.
vendor subrange
sales org: A organizational unit in Logistics that structures the company according to its sales requirements.
A sales organization is responsible for selling materials and services.
dis,, channel: channel through which saleable materials or services reach customers
dis,,center: Type of plant in which goods are stored for other plants or customers
store: Type of plant in which goods are presented and sold to consumers -
Article creation and listing can be done together in one z program
Hi Experts,
Can article creation and Listing be done together in one z program . If yes , then please confirm for the Bapi
Regards,
Richa
Moderator message: please search for available information/documentation before asking.
Edited by: Thomas Zloch on Nov 24, 2010 1:46 PMPlease check below thread will be helpful:
Re: Article creation using BAPI
Thanks and Regards,
Chandra -
Restrict User to fill mandatory Views in MM41 article creation
Currently I am working on an object where I had to restrict the user for filling at least 4 views at the time of creation of an Article using MM41.
Currently user can create an article by just filling the Basic Data (of Basic data tab) and save the article. Later on he adds the sales view, purchase view etc.
My requirement is that at the time of saving the article , i need to check whether the recomended views are filled or not, if not filled I need to give a message to the user and restrict him from SAVING the article. when he completes the required views then only he can save the article.
I had checked the transaction MM41 I found 2 exits viz.
MGW00001 Material Master (Retail): Additional Data
MGW00002 Material Master (Retail): Number Assignment
but I dont think these are of any use to me ? (please confirm).
Also i had found one BADI :- BADI_SCREEN_LOGIC_RT
it has 3 methods : REDUCE_SCREEN_SELECTION,
CHANGE_SCREEN_SEQUENCE and
AREA_OF_VALIDITY_DIRECT.
My query : Is this the valid BADI which I acn use for my problem ?
If Yes then which method should be used ?
Also how can I get which all views are filled at the time of save , in order to check whether they are complete or not.You might want to talk to the MM and/or authorization guys - they should know this stuff. This is hardly a workflow issue (at least at this point). Do few searches here in SCN with key words "material master", "screen sequences", "authorization roles" or "restrict material master views" etc. and that should bring you to the right direction.
Kind regards,
Karri -
Article creation through BAPI_MATERIAL_MAINTAINDATA_RT
Hi,
How can I create article throug bapi BAPI_MATERIAL_MAINTAINDATA_RT.
What all inputs are required?
Is it neccesarry to give material number, can't it generate automatically?
Reagrds,
DivyaHi Divya,
In BAPI BAPI_MATERIAL_MAINTAINDATA_RT does not contain any field to select purchasing view.
For purchasin view:
After material creation you have to write BDC
or you have to use any FM or you can use IDOC INFREC to create purchase info record for that material
I used INFREC IDOC to create purchse view.
Regards,
Narendra Goyal -
How to Debugg workflow for Article Creation using MM41 In IS Retails System
Existing system they are using business BUS1001006,Event Created for triggering workflow when you create article using transaction code MM41.
I could see one more business object named ZBUS100106 for triggering workflow when you Create an article.
I just want to debugg the workflow to add some additional validations to trigger workflow when i can create article using transaction code MM41.
Let me know how to debugg the workflow.
Thanks in Advance.ZBUS100106 is nothing but Custom Business Object of BUS100106 creating by extending BUS100106.
You can debug Business Object code thru putting breakpoint in Code and executing the Business Object thru SWO1.
For your requirement you could possibly use SWB_COND Tcode so as to limit workflow lanches.
Refer [this|http://mailman.mit.edu/pipermail/sap-wug/2003-November/011005.html].
Regards
Shital -
Problem in MM41(Retail article creation)
Dear Friends,
I am creating article master using MM41 but problem is that the field COLOR is not getting updated. Due to which we are unable to find colour of the article.
Kindly provide where I am missng the procedure.Thank You Sir,
Pl. continue same support hereafter also.
Regards,
amol -
Article Creation Using workflow
Hi Experts,
i am new to workflow.
i have a requirement to Create a Article using workflow. i am using BO BUS1001006. and my requirement is to fill the data in mm01 with different agents.
Now my main problem is now how can we give a user only BASIC DATA screen of MM01 and 2nd user only MRP data screen and 3rd so on.... i.e BASIC DATA input guy should not have access to MRP and vice versa..hope u understood.
How to Achieve this requirement. can you please explain.You might want to talk to the MM and/or authorization guys - they should know this stuff. This is hardly a workflow issue (at least at this point). Do few searches here in SCN with key words "material master", "screen sequences", "authorization roles" or "restrict material master views" etc. and that should bring you to the right direction.
Kind regards,
Karri -
Adobe Content Viewer + Article creation
Hello,
I've created a folio in Indesign CS5.5 but I can't create an article when I click the "New" button. The following error message displays "An error has occurred while updating article layouts. The InDesign file for the layout cannot be found. Please relink the article to desired source files".
All I've created so far is a scrolling text box which I can't preview because the Adobe Content Viewer fails to launch (dual orientation document).
I've done a clean install of Indesign CS5.5 and installed the latest Folio Producer and Builder Tools (CS5.5) posted on the Adobe DPS website.
Has anyone come across this problem recently and if so what was your solution.
Thank you.
RichardTo negilaxman,
This message has occurred for myself and asks to relink the source files, this worked before a new update of folio tools V 8.0.8.22 (CS6).
1. How can you relink these files when the server cannot find the folio on you local drive but it's available in the cloud.
2. Also Is there a easier way to duplicate all folio content ie :
All Vertically only
All Horizontal only
Also horizontal and vertical documents in the cloud need a way to re-link back towards the local drive or a cloud folio duplicate without any need to re-upload all your previous content.
Any users having the same problems with small or larger folios after this new update.
Regards
Vividi -
Article creation--How to create purchase view
Hi,
I am using BAPI_MATERIAL_MAINTAINDATA_RT to create Article. I am able to create article using Basic view, Log. DC view etc.
There is no purchasing view in HEADDATA. Also fields like Purchase organization, net price etc are not present in any structure.How to create an Article with purchasing view using this BAPI.
Please help me in this regard.
Regards,
Kiran.Hi,
I am using BAPI_MATERIAL_MAINTAINDATA_RT to create Article. I am able to create article using Basic view, Log. DC view etc.
There is no purchasing view in HEADDATA. Also fields like Purchase organization, net price etc are not present in any structure.How to create an Article with purchasing view using this BAPI.
Please help me in this regard.
Regards,
Kiran. -
Article creation-problem with Plant data
Hi,
I am using BAPI_MATERIAL_MAINTAINDATA_RT to create an Article with Basic view, Log. DC view and Sales view. I am able to create an article when RP type is ND( no planning).
But I am getting an error when I am passing RP type value other than "ND".
I am passing the following parameters:
Import Parameters:
1.HEADDATA:
MATERIAL: ARTICLE123
MATL_TYPE:HAWA
MATL_GRP:06
MATL_CAT:00
BASIC _VIEW:X
Sales_view :X
Logdc_view: X
NO_APPL_LOG:X
2.CLIENT DATA
MATERIAL: ARTICLE123
BASE_UOM:KG
TRANS_GRP:0001
TAX_CLASS:0
3.CLIENTDATAX
MATERIAL: ARTICLE123
BASE_UOM:X
TRANS_GRP:X
TAX_CLASS:X
4.ADDLCLIENTDATA
MATERIAL: ARTICLE123
LOADINGGRP-0001
5. ADDLCLIENTDATAX
MATERIAL: ARTICLE123
LOADINGGRP-X
6.MATERIALDESCRIPTION
MATERIAL: ARTICLE123
LANGU-EN
MATL_DESC-TEST MAT
7.PLANTDATA
MATERIAL -ARTICLE123
PLANT---RFDC
MRP_TYPE--pd
MRP-CTRLER- 001
LOTSIZEKEY-EX
AVAILCHECK--01
8 PLANTDATAX
MATERIAL- ARTICLE123
PLANT--X
MRP_TYPE--X
MRP-CTRLER- X
LOTSIZEKEY-X
AVAILCHECK--X
9.SALESDATA:
MATERIAL- ARTICLE123
SALES_ORG---IN01
DISTR_CHANL--01
SELL_DC_fr----10.09.2008
Sell_dc-to: 10.09.2020
10.SALESDATAX:
MATERIAL- ARTICLE123
SALES_ORG-X
DISTR_CHANL-X
SELL_DC_FR-X
Sell_dc-TO-X
I am getting the error: "144 the field MARC-DISMM is defined as a required field; it doesnot contain an entry."
with the above parameters, I am able to create an article using MM41.
Is any addl. parameters needed?
Please help me in this regard.
Regards,
Kiran.Hmm, difficult to check out.
I guess the best thing is to open an customer message, open system and prepare a test example.
With debugging it is a thing of 10 seconds.
The message is more or less generic. It could be possible that the sales data will lead to a different reference handling. Mostly such errors are based on customizing and masterdata dependencies.
Set a breakpoint in material_update_all_retail,
at the end there will be a loop over the sites. Stop at every site and see when erro will appear. Then you will have the logic key in RMMG1 for the error. -
H i,
i am creating the article master data but not able to see the code for article type but only description in dropdown list. Can anybody tell me how can i see the article type code with the description in the dropdown list?
Thanks in advance!
PRAFULHi Prafulla,
In SAP Easy Access Menu, in your System Tool Bar (on the right end of where you enter the Txn code), there will be a small colourful icon just next to "?" icon, this is called Customize Local Layout icon.
Click on this icon
Go to Options
Go to Expert Tab
Under Controls ->Check the "Show Keys in All Dropdown Lists"
Then click "Apply" at the bottom.
Once again enter MM41 and you can see this becomes effective.
This should enable your article type code appear along with the description.
Hope it helps
Rgds,
Aram. -
Hi it is me again - so now I have moved onto Articles. I can create an article and link it to a Merchandise category. I can create one article hierarchy level and link it to one other , but can't figure out how to add more levels to the Article Hierarchy - any thoughts?
Hi,
Check this link, it might help you.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/73/5778d802c311d3964300a0c930e0da/content.htm
Thanks
Madhu
Maybe you are looking for
-
I do not have enough memory to update phone. My camera roll is taking up over 8gb of memory so if I delete the photos will they also be deleted on my iPad
-
Interactive Report with union all in the query
I have an interactive report with the following query in the report region: select property,saddr1,upostdate,sotherdate1,journal_control-1000000000,account,sdesc,uref, suserdefined1,trans_notes,samount,detail_notes from journal_entries union all sele
-
Installation of Oracle 8i under Win XP ( PC DELL Pentium 4 )
Hello, I try to Install Oracle 8i under Win XP ( PC DELL Pentium 4 ) but the program of installation can not lanch then Oracle Universal Installer Please help me
-
Experts, I am creating a small POC for a search engine. I am thinking on what is the best way to achieve the below scenario 1) Assume like in Google i am entering some data in the text box. I want the area below the text box to show the records (leav
-
A failure occured while calling Diagnostics Setup web service
Hi Guys. When performing the Automatic Activities of the Solution Manager 7.1 Basic Configuration, on one step you can execute the Diagnostics Configuration. When clicking on the details it shows the following message. SOAP:1.007 SRT: Unsupported xst