Article getting blocked.

Hi,
I am doing a tranfer posting using FM BAPI_GOODSMVT_CREATE and then I am trying to update the outbound delivery quantity using the picked quantity and picked date.
I am getting an error "Article is blocked" while updating the outbound delivery.
Please help me to undersatnd why I am getting the error and how to remove it.
Help needed urgently.
Thanks,
Sandeep.

Hi Johan,
It was a difficult problem. It seems that the articles were continue blocked for example some program is scanning continue for article data or changing data.
the matchingprogramm RMBABG00 can overule this block.
I have changed the status of the invoice header to matching in the background and after that I ran the matching programm (RMBABG00).
The invoice is booked en the workflow is ended.
Regards,
Abdul Mazid

Similar Messages

I keep getting blocked by site advisor trying to get into my google calendar, why

Mozilla Firefox is my "go to" browser, however I keep getting blocked by site adviser messages when I go into as simple a site as my google calendar site. Ive even turned off, disabled, the adviser but STILL keep getting blocked.
Very, very annoying and I'd like a solution please

Try using [https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/ ABP]
'''You can try these free programs to scan for malware''', which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Firefox get blocked every time I go on Youtube

Hi. This is the problem:
Everytime I go on Youtube, Firefox get blocked and I have to do the thing (CTRL+ALT+CANC) for close the browser. I know that the problem is releated to Adobe Flash because when I disable it, Youtube works, but is there any different solution? (I can watch, with adobe flash on, youtube's video on other sites, like facebook). I have the last version of Adobe Flash/Shockwave/Firefox. The problem affects also Aurora. (If i open a youtube page and quickly open a new window, I can listen to the video, but if I return to the youtube window, the problem appears again).
P.S: I can't find any article talking about this in Mozilla'support page.
Sorry for my bad english. Mario.

Does that only happen with that Aurora version or with the regular Firefox 10.0.* as well?
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I'm trying to access mymaths .co.uk but constantly get blocked plug ins even though plug ins are allowed,any suggestions

plug ins are allowed on my imac.i need to use mymaths.co.uk but still get blocked plug in after downloading adobe.any suggestions would be appreciated

Hi afwind,
Welcome to Apple Support Communities.
Do you have another computer that you could try restoring the iPhone on? It looks like you've tried most of the suggestions in the article linked below, which provides tips for resolving the update and restore alerts that you mentioned.
Error 3194, Error 17, or "This device isn't eligible for the requested build"
http://support.apple.com/kb/ts4451
Cheers!
-Jason

Credit card Orders are getting blocked with credit check

Hi All
In our system, If customer's credit exposure is greater then 100 % then all the credit card orders are getting blocked with credit check even though it has valid authorization. Is this sap standard behaviour?....is there any setting that will always exclude credit card orders when it has valid authorization
Thanks in advance for looking into this

Hi,
In OVA8- under document controlling- check the existing routinue 1 for orders etc., else modify as per your requirement
Thanks
Chidamabram

Sales orders from CRM are not getting blocked with credit check

Hi All
I have configured ECC in such a way that , if cutomer does not have enough creditlimt, then those sales order will get blocked. Our orders will come from CRM, and some times some orders are not getting blocked with credit check even though the customer does not have credit limit. And at the same time some orders are blocked with credit check...what are all the things that should be checked to diagnose the problem.
Thanks in advance for looking into this

Please check if you have any custom code/user exit in ECC which uses transaction code (VA01 , VA02 or VA05 etc) prior to invoking credit checks.
Orders created via CRM will not have transaction code set (SY-TCODE).

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

I am trying to load and run a game called asheron's call and keep getting blocked from doing what i want to do. what can i do to fix it so mi can get to play the game

i get game downloaded and icon on desktop the company has to send an e-mail so i can connect to a link for the game and it keeps getting blocked might be the firewall or cookies block not sure how ever i can't play the game and getting very mad how can this be fixed

I get an error message saying that this app can't run on my pc and that I need to find a version that will work through my administrator.
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I am trying to view videos and I keep getting blocked plugin signs. What can I do to fix this problem.

I am unable to view videos. I keep getting blocked plugin signs. How can I fix this problem?

What if the latest plugin is the problem? I installed the latest version and now it does not work.

Open quantity gets blocked (SUS)

Hi all,
We had PO qty 4 each, GR was done for 4 each (through SUS), but in quality inspection 1 qty was rejected in quality inespection and 122 movement type, nw the vendor must be able to do ASN against the remaining 1 qty, but the system dont allow to do the ASN against the PO, it is showing confirmed quantity as 4 each..
Same is the case with schedule lines the open quantity gets blocked..
any suggestion.. please guide me..
Regards,
Abhishek
MM/SRM

Hi Abhishek,
You can do a GR only when the vendor has sent an ASN.
Regards,
Nikhil

BPM queue get block

Hi,
I have a web services that use bpm scenario. Every time when a error example date type format happen on the bpm the queue with get block on smq2 and others request by the web services will get hold. Any way that can i disable this? Every time i have to delete the error queue in order to let the webservices work again.
Thanks for help.

Hi Fcgan,
Use these reports to handle the queue in automated manner.
· RSARFCSE: Restart an LUW (background job)
· RSARFCEX: Restart tRFC LUWs (background job)
· RSQOWKEX: Restart QOUT qRFC LUWs
· RSQIWKEX: Restart QIN qRFC LUWs
· RSARFCSE: Delete an LUW (background job)
· RSARFCER: Delete various LUWs
Thanks!

Queue gets blocked in Receiver System . Pls advice urgent

Hi All,
When I send data from CRM --- XI --- DM system
Whenever data comes at DM system everytime queue gets blocked and gets status "SYSFAIL".
Pls tell me how to solve this problem.
Regards

1.You can use transaction codes SMQR and SXMB_ADM for queue status resetting.
2.Use transaction codes SMQ1 and SMQ2 for deleting SYSFAIL files, and manually resending messages in the queues.(For activating queues in SMQ1 and SMQ2, you would need to first deregister them in SMQR or SXMB_ADM).
3.As a pre-requisite, the IS configuration parameter MONITOR QRFC_RESTART_ALLOWED should be set to 1.
/people/prashanth.azharuddin/blog/2006/11/24/some-errors-in-an-xi-production-environment
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically

Lately Photoshop CC 2014 in my PC gets blocked when doing panoramas. First I edit my raw photos in Lightroom, then export to Photoshop for making panoramas. My Pc runs Windows 8.1 64 bits 8Gb Ram, Lately Photoshop CC 2014 in my PC gets blocked when doing

Últimamente Photoshop CC 2014 se detiene fusionando las capas al hacer panoramas. Primero edito mis fotos Raw en Lightroom luego las paso a Photoshop para hacer panoramas. Photoshop las abre y fusionando las capas se detiene.
Según el administrador de tareas cuando se bloquea tiene ocupado el 81 % de memoria 25% de CPU y 1% del disco.
Mi PC tiene Windows 8.1 de 64 bits y tiene 8 Gb de ram
Lately Photoshop CC 2014 in my PC gets blocked when doing panoramas. First I edit my raw photos in Lightroom, then export to Photoshop for making panoramas. My Pc runs Windows 8.1 64 bits 8Gb Ram

Últimamente Photoshop CC 2014 se detiene fusionando las capas al hacer panoramas. Primero edito mis fotos Raw en Lightroom luego las paso a Photoshop para hacer panoramas. Photoshop las abre y fusionando las capas se detiene.
Según el administrador de tareas cuando se bloquea tiene ocupado el 81 % de memoria 25% de CPU y 1% del disco.
Mi PC tiene Windows 8.1 de 64 bits y tiene 8 Gb de ram
Lately Photoshop CC 2014 in my PC gets blocked when doing panoramas. First I edit my raw photos in Lightroom, then export to Photoshop for making panoramas. My Pc runs Windows 8.1 64 bits 8Gb Ram

Sales order should get block if XYZ payment terms is used

Dear Expert,
The requirement is like,
If user add payment term XYZ manually in salse order then that sales order should get block for review purpose.
Note:
if user add that payment term in sales order client want that order should block no matter what reason , here client not concern about credit limit and any outstanding from customer side ,
Thanks in advance
hanumant

Hi,
You need to block orders with payment terms XYZ, or only when user changes from ABC to XYZ??
If first one is your requirment, you can do with userexit - USEREXIT_SAVE_DOCUMENT, and you need to create status profile for sales document type and assign to order type, in status profile put status AUTO - automatically approved, LOCK - when XYZ is payments terms it wil not and not create delivery & REJC- Rejected, when approver dont want to approve he can reject.
In sales order userexit you need write logic when paytemnt terms is XYZ then put status as LOCK.
New repor need to create to approve LOCKed orders so that user execute and approves or rejects.
If only user change to XYZ, then you need to write logic in prepare userexit, but it will be tricy, need to store values in tempapory memory, ceck with abaper,

Loading pages from a internet explorer gets blocked

hi my problem is simple,
in my jsp i have two window.open's, one opens a jsp directly and the other is sending a request to a servlet and it opens a jsp.
now the second one(redirecting to servlet) gets blocked if the blocking option is set, so i cannot view it from my IE or firefox.
I would like to know how can i solve this problem as i would like the window to open even if it is directed to the servlet.
Of course if i can only do it for this page then fine
thanks

One option I've tried is calling my custom Javascript method which then internally calls window.open
It works on any link - Html, JSP etc. A Servlet is just another URL I don't see why it should only block a Servlet.
What URL are you specifying for the Servlet?
normally if you map a URL pattern for the Servlet in web.xml , it looks like any other URL , for example /somepage , could be mapped to your Servlet.
Or perhaps you could even map the URL /somepage.html to a Servlet. ( I haven't tried it, but I think it should work.)

Article getting blocked.

Similar Messages

Maybe you are looking for