Article IDoc not getting processed in PI for particle article type

Hello All,
     I have an strange behaviour in my system.
i.e 1, we are creating an article IDOC by using BD10 for particulat article type.
2, IDOC created succesfully , then
3, Process the IDOC in BD87 to push the IDOC to PI system .
4, But i could not see the message in PI that too only for one article type.
I'm wondering why this is not getting processed only for one article type and not for others.
we also checked the basic filter for the message type in dist model and even i could not see any condition in PI also,
  Is there any thing else i should check? can you please help us on this.
Regards , Sethu.

Hi,
Try to reimport the metadata of IDOC into PI in idx2. Also check the port definition in ECC and whether the segment is released or not. Please go through the below discussions it may help you.
EDISDEF: Port XXX segment defn E2EDK35 in IDoc type ORDERS05 CIM type
IDoc 0000000000181226 was saved but cannot or should not be sent
Regards,
Priyanka

Similar Messages

  • Why do I not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task?

    We are trying to use workflows to review and edit pdf files in sharepoint 2010. We are having a couple of issues and am hoping someone has the answer.....
    1)  When myself and coworkers click on the pdf document in the library, we get the check out option as expected.  However when we click on the document
    link in a workflow task (on the sharepoint site), the pdf opens as a temporary file and we do not get the check out option.  Why does this happen????? 
    2)  The same thing happens when we click on the document link in the workflow task email;   HOWEVER,  one of our co-workers does get the
    check out option when clicking on the link in the email task.  Why would she get the checkout option using the email and not when clicking on the link in the task list on the sharepoint site ????  We have compared our internet settings and adobe
    settings to ours and found no differences.
    We are using Sharepoint 2010, Windows 7, IE8, Adobe Reader X or XI.  Some of us have Adobe Pro X and have the same issues.

    Hi,
    According to your post, my understanding is that you could not get the checkout option for a pdf type document when clicking on the document link in the SharePoint workflow task.
    I try to reproduce the issue, however, no matter when I click the pdf type document in the library or click on the pdf document link in the workflow task email, it download the pdf doucment and then I can open it.
    It will be better if you can descript how you
    get the check out option as expected when you click on the pdf document in the library.
    Then I upload a
    word type document to the library, no matter when I click the word type document in the library or click on the word document link in the workflow task email, I can open the word document directly and get the check out option as expected.
    I recommend to use the other type docuemts to check whether the check out option works.
    Thank you for your understanding.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • RSEOUT00 - Idoc not getting processed

    Hi All,
    I have few idocs in prod.system with status 30 and they are not getting processed using RSEOUT00.
    I tried using back ground job / forgrond / BD87 also but they are not getting converted to 03 status.
    receiver port is xmlgen.
    Any thing like idoc lock ? or something other that is preventing it process ?
    Please let me know if anything.

    check out the multiple threads in SDN regarding this issue
    idoc remains random in status 30
    some of the common pointers looks to be locked IDOC (check in SM12), SM58 to see if anything is in the RFC queue (though I doubt that would be the case)..
    How are you generating your idoc? standard FM or MASTER_IDOC_DISTRIBUTE?

  • ALE - Idoc not getting processed automatically, instead going fine in Debug

    Hello All,
    I have a problem with Inbound idoc processing.
    IDoc settings were made 'immediate processing' in WE20, and the process code is set correctly and the attached of Z-Fun. module to process the idocs to process code.
    The error in inbound side is as 'Function module not allowed: APPL_IDOC_INPUTI' 51 status. Am sure i have to do some thing with ALE settings.
    Can some body help me with correction step or sequence of steps  for this ALE process.
    Thanks & Regards, Jilan

    Hi Jilan,
    Plz follow the steps:
    ALE Configuration:
    •     WE30 - IDOC type creation
    •     WE31 - Create segment
    •     WE81 - Message type creation
    •     WE82 - Link IDOC type to Message type
    •     SE37   - Create Inbound Function Module
    •     BD51  - Maintain entry for Function Module
    •     WE57 - Maintain
    •     BD57  - Link Function Module, IDOC type and Message type
    •     WE42 – Create Inbound Process Code
    •     BD67  - Link Process code to Function Module
    •     WE20 - Create Partner Profile
    •     BD64  -  Display Distribution Model
    •     WE02 -  IDoc List, Display all Inbound/Outbound IDocs
    •     WE14 -  Outbound Processing of IDoc’s
    •     BD20 -  Inbound Processing of IDoc’s
    1st Step:   Create  a Segment  ( WE31)
             Segment is a structure for passing data in IDoc. It actually contains the IDoc data, just like the DDIC table/structure. Segment is created with all the required fields. Then Save it.  But, to actually use this Segment, you have to Release the Segment, otherwise u can’t use the Segment, by menu, EDIT--> Set Release.
             Now, if you want to do some change to this Segment, u cant, unless & until u Cancel the Release, by Edit--> Cancel Release.
    2nd Step:   Create IDOC Type  ( WE30 )
            After creating the Segment, now we have to create the IDoc Type. IDOC Type is like an envelop of a letter, which contains the data inside it, & also some more information like address. IDoc type can be Basic Or Extended.
           Basic IDoc Type:  Using some SAP existing IDOC type (ex. MATMAS) or Custom IDOC type.
           Extension IDOC Type:  When we need some fields extra to an existing IDOC type, then we can extend that Basic Idoc Type by another Segment. This is called Extended idoc type
    3rd Step:   Create Message Type (WE81)
         Message Type is like the Postman for sending the Letter.
      4th Step:   Attach Message Type to the IDOC Type (WE82)
    5th Step:   Create a Function Module (SE37)
           Write the Processing logic in a Function Module.
    6th Step:   Mention the IDOC Type, i.e, 0/1/2 (BD51)
    7th Step:   Assign the Message Type, IDOC Type & Function Module (WE57)
    8th Step:   Create a Custom Process Code (WE42)
    9th Step:   Attach the Function Module to the Process Code (BD67)
    10th Step: Execute Inbound IDOC’ s (WE19)
    Example Function Module: IDOC_INPUT_ORDERS (Standard FM to create Sales Order).
    reward is useful,
    regards,
    Tanmay

  • IDoc not getting processed in Real Time job

    Hello,
    The configurations are done as per the below link to receive iDoc from SAP in BODS.
    How to Receive IDOC in BODS from SAP (Outbound to SAP)
    An iDoc is sent and Real Time Services on management console shows that request is received successfully. But I cannot see output xml file created. When I checked the real time services and client interfaces, I could see all are in green.
    But the real time job status shows its in running state. It has been in running state for 2 days. Trace shows as below. There is no error message.
    14.2) 04-24-14 18:47:41 (18417:1140171104)      JOB: Optimizing job <JOB_BODS_RT_IDocMatmas01>.
    (14.2) 04-24-14 18:47:47 (18417:1140171104)      JOB: Job <JOB_BODS_RT_IDocMatmas01> is started.
    (14.2) 04-24-14 18:47:47 (18417:1140171104) DATAFLOW: Data flow <DF_RT_IDocMatmas01> is initialized.
    (14.2) 04-24-14 18:47:47 (18417:1140171104) DATAFLOW: Data flow <DF_RT_IDocMatmas01> using IN MEMORY Cache.
    (14.2) 04-24-14 18:47:48 (18417:1140171104) DATAFLOW: Data flow <ActaDefaultNotificationSender> is initialized.
    (14.2) 04-24-14 18:47:49 (18417:1140171104) DATAFLOW: Data flow <ActaDefaultNotificationSender> using IN MEMORY Cache.
    Can anyone please let me know if there is anything missing in the configuration? How do I resolve this issue?
    DS version: 4.2

    Hi,
    Try to reimport the metadata of IDOC into PI in idx2. Also check the port definition in ECC and whether the segment is released or not. Please go through the below discussions it may help you.
    EDISDEF: Port XXX segment defn E2EDK35 in IDoc type ORDERS05 CIM type
    IDoc 0000000000181226 was saved but cannot or should not be sent
    Regards,
    Priyanka

  • IDOCS Error - Not getting processed automatically

    Hi All,
    We are loading hierarchy for a Product from R/3 system using the standard datasource.
    When we execute the info package, IDOCs are not getting processed automatically.
    We are facing the below error message.
    Error when updating Idocs in Business Information Warehouse
    Diagnosis
    Errors have been reported in Business Information Warehouse during IDoc update:
    No status record was passed to ALE by the applicat
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.
    But when we goto BD87 and process the IDOCs manually, these are getting posted and the hierarchy is loading.
    Can someone please guide me on what is the issue with the IDOCs and how to make them to post automatically.
    Thanks in Advance
    Regards,
    Sachin

    Hi,
    This will happen due to Non-updated IDOCu2019s in the Source system i.e., occurs whenever LUWu2019s are not transferred from the source system to the destination system. If you look at RSMO of the status tab, the error message would appear like u201CtRFC Error in Source Systemu201D or u201CtRFC Error in Data Warehouseu201D or simply u201CtRFC Erroru201D depending on the system from where data is being extracted. Sometimes IDOC are also stuck on R/3 side as there were no processors available to process them. The solution for this Execute LUWu2019s manually. Go to the menu Environment -> Transact. RFC -> In the Source System from RSMO which will asks to login into the source system. The u201CStatus Textu201D for stucked LUWu2019s may be Transaction Recorded or Transaction waiting. Once you encounter this type of status Execute LUWu2019s manually using u201CF6u201D or Editexecute LUWu2019s(F6).Just keep on refreshing until you get the status u201CTransaction is executingu201D in the Production system. We can even see the stuck IDOCu2019c in Transaction BD87 also.Now the data will be pulled into the BW.
    Hope it helps a lot.
    Thanks and Regards,
    Kamesham

  • IDOC status 64 not getting processed.

    Hi Gurus,
          I have a problem where IDOC's with status 64 are not getting processed via background job. the IDOCs weere getting processed with the background job till today evening, but suddenly no changes were made and the processing of IDOC's with status 64 has stopped and they keep filling up, when i checked the log of the Background job it says finished, and the log has the following information,
    17.09.2009 19:05:23 Job started                                                                   00           516          S
    17.09.2009 19:05:23 Step 001 started (program RBDAPP01, variant POS_IDOCS, user ID SAPAUDIT)      00           550          S
    17.09.2009 19:05:25 No data could be selected.                                                    B1           083          I
    17.09.2009 19:05:25 Job finished                                                                  00           517          S
    Kindly advise on this.
    Regards,
    Riaz.

    When i process the IDOC's using BD87, they gets processed wiwth out aany issues no dump is displayed, idoc gets a status 53 after processing via BD87.
    There is another problem how ever there are other jobs scheduled to run in the background other than this background job which are getting cancelled and have two different error logs for different jobs they are as follows.
    1) 18.09.2009 02:00:06 Job started                                             00           516          S
    18.09.2009 02:00:06 Logon not possible (error in license check)             00           179          E
    18.09.2009 02:00:06 Job cancelled after system exception ERROR_MESSAGE      00           564          A
    2) 18.09.2009 00:55:27 Job started                                                          00           516          S
    18.09.2009 00:55:27 Step 001 started (program RSCOLL00, variant , user ID JGERARDO)      00           550          S
    18.09.2009 00:55:29 Clean_Plan:Gestartet von RSDBPREV                                   DB6PM         000          S
    18.09.2009 00:55:29 Clean_Plan:beendet                                                  DB6PM         000          S
    18.09.2009 01:00:52 ABAP/4 processor: DBIF_RSQL_SQL_ERROR                                00           671          A
    18.09.2009 01:00:52 Job cancelled                                                        00           518          A
    This is a production server and the Licence is valid till 31.12.9999, and has no issues with the license.

  • Automatic update of number ranges in FBN1 is not getting processed

    Automatic update of number ranges in FBN1 (current status) level is not getting processed.
    Tried posting a customer payment document in the system though number ranges are maintained for the year 2015 the number ranges are not overlapped last year all documents are closed but still the numbers are not been picked automatically in FBN1 kindly help in this issue

    Hello Rajesh
    Please verify if number ranges are maintained correctly, verify same using transaction OBA7. Also ensure that external assignment is unchecked in FBN1. Share screenshots if possible.
    Regards
    Aniket

  • Savings Plan Contribution is not getting processed in Payroll

    Hello Friends,
    We are in the process of upgrading our system from 4.0 to 4.7, After correcting the schema as per the release/OSS notes, we are getting Savings Plan Contribution as blank (Retirement Savings).
    Cumulation values are coming thru right but current period contribution is missing.
    Earlier we had P0169 with P61, now we do not see processing class(PCLS)61 in the PCLS list. Our earlier wage types were referring to PCLS 61, I am not sure if this is causing an issue.
    Please let me know if you have any faced similar situation and have an answer.
    Thanks & Best Regards
    ravi

    Ravi,
    Appriciate if you could share the solution for your problem in savings plan contribution is not getting processed in the payroll. As I am facing the same kind od problem for my new configured benefit plan ROTH 401k plan.
    Please let me know the solution.
    Thanks & Regards,
    Sunita

  • Entry not getting processed

    I have an Non recurrening Multiple Entries allowed element to an assignment which is not getting processed when i run payroll.
    Please help
    Thanks

    This is to ensure that results generated by the future payroll runs are correct. Lets take a simple eg.
    You have a pension element which would be 10% of Gross Pay_YTD.
    Run Payroll for Jan (Gross Pay) = 1000 -> Pension = 100 (10% of 1000).
    Run Payroll for Mar (Gross Pay) = 1000 -> Pension = 200 (10% of 2000).
    Run Payroll for Feb (Gross Pay) = 1000 -> Pension = 200 (10% of 2000 as _YTD of Feb does not account  March figures).
    In the above case the Payroll Run results generated by March would be incorrect.
    So once you run Payroll for March, you can not run payroll for Feb. If you require any additional payments to be made in Feb (after Payroll for Feb and March are processed), you can run Retropay to bring forward the entries to next Open pay period.

  • Data packet not getting processed

    Hi SDN's
    I m loading data from one ODS to 4 regions , the source ODS is successfully loaded from der to the data targets the load is getting failed or taking loang time .
    upto transfer rules the data is successful, in update rules data packets are not getting processed
    kindly suggest solution, points will be assigned
    thx in advance

    Hi Katam,
    In the target ODSs go to the monitor screen for a particular request -> in the menu bar go to environment -> transactRFC-> in the datawarehouse -> give the ID and date -> execute.
    Check if there are entries in that. Usually this queue will be stuck and you need to execute the LUWs in the queue manually.
    if it says transaction recorded u need to execute it manually
    Please revert if any issues
    Edited by: Pramod Manjunath on Dec 19, 2007 4:48 PM

  • IDOC not getting genrated

    Hi Experts,
    Need your help.
    In idoc creation, I have changed material description, its generating master idoc but communication idoc not getting generated.
    Please suggest me the solution,
    Regards,
    Rachna

    Hi,
    Idoc's are generated based on the payment method and any how in the payment method we will give the required curriencies which are applicable for that payment method.
    And u had mentioned as WE05 for IDOC list, but actually the T.Code for IDOC list is WE02.
    Check the settings, it has to come. Reply back for more clarifications.
    regards
    srikanth.

  • Bulky Message are not getting processed

    Hi All,
    Recently we have upgraded our XI systems to EHP4.
    After upgrade Bulky files are not getting processed into XI system. Small files are getting processed successfully.
    Earlier we had faced same issue at that time we have maintained some parameters in transaction RZ10, RZ11, SXMB_ADM-->
    Integration Configuration--> HTTP time out parameter.
    Same parameters are still there. But now the message is not getting processed in XI when we check into sxi_monitor. Message mapping is also not seems to be a problem as we havnt put any bulky logic over there.
    The message is not getting processed ahead of  Receiver Grouping .  Please find attached log from Performanceheader
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Receiver Grouping
      -->
    - <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134229.930472</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="end" host="evoxicqab">20091210134232.052577</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134232.059576</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="evoxicqab">20091210134232.07151</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134232.071518</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
      <SAP:Timestamp type="end" host="evoxicqab">20091210134237.239947</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134237.241179</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="evoxicqab">20091210134237.250385</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134239.999045</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="evoxicqab">20091210134240.001292</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134240.001413</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="end" host="evoxicqab">20091210134240.026156</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
      <SAP:Timestamp type="begin" host="evoxicqab">20091210134240.026164</SAP:Timestamp>
      </SAP:RunTimeItem>
      </SAP:PerformanceHeader>

    Hi
    Have you checked this thread, same discussion here
    Performance of XI Interfaces
    Also check this blog
    /people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
    Regards
    Ramesh

  • Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

    Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

    Hi..
    For Mail, from your Mail menu bar (top of your screen) click Mail > Preferences then select the General tab.
    Click the pop up menu to the right of New messages sound to make a selection.

  • Idoc WPUWBW: Status 51 - IDoc not fully processed

    Hi All!
    Hi All!
    This is regarding Goods Moment.
    In Quality, Idoc is successfully generated at POSDM system and also in ECC system.
    In Production, Idoc is successfully generated at POSDM, but in ECC it is failed (Idoc WPUWBW: Status 51-IDoc not fully processed).
    So, at WPER it is showing as In deficit of stock. But stock is available.
    Kindly suggest me how to close this issue.
    Note: PFA Below. Its the screenshot of the error at WPER.
    With Regards,
    Yarnagula Sudhir.

    Dear Venu
    Difficult to answer with this limited information. If you share some more info will be easier to help
    regards
    Manish

Maybe you are looking for

  • Problem in displaying the description of item

    Hi, I am working on a report of production order and i want to display the description of the Item but the problem the matnr is stored in ITPO1 AND i am displaying the values of ITPO5 which contains the difference value of qty of Item . To display th

  • Message no. AC496

    Customizing inconsistency (contact your system administrator) Message no. AC496 Diagnosis Company code INTE manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreci

  • Adobe  Standard  X1  to  convert    PDF  to  Excel

    I  was  advised  by  an  adobe  staff  member  to  purchase   Adobe   Standard  X1  to  convert  PDF  to  Excel.   However  the info  is  placed  randomly  on  the  page.

  • Trying to keep IE out of "quirks mode"

    I was told that if I used HTML 4.01 Strict for my DOCTYPE, it would prevent IE from going into "quirks mode." However, after doing that and trying to validate the pages, I got dozens of errors. Most concerned closing some tags with " />" instead of j

  • I receive the following error when attempting to import to Lightroom for the first time ?:0: attempt

    Can anyone help?  This has been a very painful process! error message is as follows: c?:0: attempt to call field 'isNSImage' (a nil value) forums have been no help.  I am starting to regret even buying this software