Article Master Uploading in IS- Retail system steps

Hi Experts,
Please tell me what are the steps in Uploading Article Master in IS Retail system during GO Live???
How to convert Articles in Legacy system to SAP system (Whether we need to change number range (Internal or External) of Article Type during Upload time???)
We need to extend each variant of generic article for purchasing, sales, logistics DC and Store View since each variant article is brought at different price in Different DCu2019s. (Once we create Generic article, then only we will come to know the variant codes u2013 How to handle this scenario during GO-Live)
Can any one tell me, how these activities are generally handled in IS-RETAIL Project???
Any Input is highly appreciated.
Thanks and Regards,
Selvakumar.M

IDOC PROCESS IN LSMW

Similar Messages

  • Article Master Uploading in IS- Retail system

    Hi Experts,
    Please tell me what are the steps in Uploading Article Master in IS Retail system during GO Live???
    How to convert Articles in Legacy system to SAP system (Whether we need to change number range (Internal or External) of Article Type during Upload time???)
    We need to extend each variant of generic article for purchasing, sales, logistics DC and Store View since each variant article is brought at different price in Different DCu2019s. (Once we create Generic article, then only we will come to know the variant codes u2013 How to handle this scenario during GO-Live)
    Can any one tell me, how these activities are generally handled in IS-RETAIL Project???
    Any Input is highly appreciated.
    Thanks and Regards,
    Selvakumar.M

    Uploading articles should be done in all cases always with IDOC type ARTMAS
    Converting can be done with migration workbench LSMW
    Number ranges can be internally or externaly. It doesnt matter in migration.
    If you plan to use internal numbers for article numbers, then define a numberrange
    set the counter higher than your current number of articles.
    Migrate the articles in the created number gap range.
    Please do not mix up master data and prices.
    With ARTMAS you can migrate the views and pure master data. I recommend to use the WRKKEY fields at the end of the IDOC to speed up processing.
    Always don't forget to define REFRENCE DC and REFERENCE STORE setting in customizing. Article master will work only if these settings are correct.
    To simplify process, create manually some reference articles. That helps a lot.
    For all other things or hints, we need more details.
    It can be very easy up to very sophisticated. The artcicle master is a nice piece of software, very flexible, but also very bad, if you use it by a wrong way.....
    Cheers
    B

  • SAP MDG and article master in SAP IS-Retail

    We need a solution, where external vendors can contribute with article information, the master data persons can enrich the vendor information, and where the articles can be created appropriately afterwards in SAP ERP.
    SAP Master Data Governance (MDG) seems to be the right solution for standard SAP. And SAP MDG has also been described in enhancement packages for SAP Retail since at least ECC 6.05, Nevertless previous discussions such has MDG-Material and IS-Retail  indicate that SAP MDG is not appropriate for SAP Retail.
    Please contribute with your considerations and experiences: Is MDG appropriate for article master data maintenance in SAP Retail?

    Hi Sune
    The thread you are refering to is quite old, there is a solution available now for doing retail master data governance on SAP MDG. This is offered as a consulting solution now.
    The data model itself is modelled after the IS Retail data model for Article master and would leverage on the data governance capabilites offered by the MDG framework.
    It is not exactly a supplier portal for data exchange but there have been architecture discussions on using a 'lean' version of the data model as a vendor facing portal and seperating this from internal facing MDG for enriching the ERP specific parts of the article master data , before governing and commiting to the ERP system.
    If you are interested in talking more about it would be happy to do so.
    Regards
    Dilip

  • ARTICLE MASTER UPLOAD

    Hi guys,
    I'm using LSMW & IDOC (ARTMAS) to upload article master. When I test the Idoc with WE19, it goes to an User_Exit that I've implemented. When I run it through the LSMW though it does not go there at all. Do you guys know the reason and what is the solution?
    Actually, what I'm trying to do is do update a custom field in MARM table.
    Thanks a lot.
    Franck Lone

    Hi James
    You can use BAPI_MATERIAL_MAINTAINDATA_RT.
    Regards,
    Christian

  • Help reqd on Material Master uploading in LSMW by view steps....

    Hi all....
    Pls understand my requirement and post ur replies...i dont need the basic LSMW learning steps for MM,Vendor etc.,like that...
    My problem is...im want to upload my material master datas by steps like 1st i want to uplaod the basic views 1&2 for all the material types in one shot...
    next thing i want to load the other views like purchasing sales mrp plant qm accounting etc., in single shot......like screen to be extended formats....im mm01 or by mm02...
    when i did....no problem i've  faced upto MRP loading...but the next view like plan,QM,accounting is not coming when recording in RUN batch input session..it says..."the material has been already extended and no input was given for this screen"....
    Hope u understand,my problem....
    if u have answers...pls post me on urgent basis.....
    thanks...
    sankar

    Create purchase requisition by LSMW

  • Material master upload to new SAP system

    Hi,
    Please help me to decide the procedure on migrating material master from ECC 5.0 to ECC 6.0.
    One of my idea is to use LSMW and other is to use ALE.
    I am expecting many changes in the current material master, so using standard ALE BD10 is difficult. Example: ECC5.0 material type "ABC" would be "XYZ". (XYZ and ABC are of same material type, example: FERT). I choose to have different material number in new system. Like that there are few more changes.
    What are all the best methods to extract the data from ECC5.0? I was checking the program RMDATGEN to download the data, but it is not readable. I can prepare a file format and map the columns in ECC6.0 LSMW. Since both the systems are SAP, I am thinking why to prepare a seperate input file format? Again I need to download the data from ECC5.0 for that format. Is there a simple to download and upload the data? Please let me know.
    Thanks
    Nagarajan

    Here you define your Partner profile:
    IMG > Application Link Enabling (ALE) > Modelling and Implementing Business Processes > Partner Profiles and Time of Processing > Maintain Partner Profile Manually
    And in the details you define for yor message type MATMAS:
    Receiver port: X
    Output mode: Collect Idocs and Do not start subsystem
    This collection writes the idocs to a file.
    This file can then be found in SAP file system with transaction AL11.
    a clever basis guy can then move it from there to your network.

  • IDOC type for Article Master : IS Retail

    Hi all,
    I am new to ALE/ IDOC and working in a scenario to create article master in SAP from third party application. The client is using IS Retail system with ECC 6.0. Can you please suggest what IDOC type to be used. The IDOC will be sent to SAP system from the third-party application. The IDOC can then be processed to create article master. Is ARTMAS the right message type for it? Somebody also suggested using message type WP_PLU. Can someone please let me know what is the difference between them?
    Thanks,
    Sonika

    Hello Sonika,
    WE_PLU is generally used along with the POS interface.
    Please check this for more details
    http://help.sap.com/saphelp_470/helpdata/en/ed/df673c86d19b35e10000000a11402f/frameset.htm
    Article Master Uploading in IS- Retail system
    This is basically your call depending on what data the message type is intended to carry and the use. ARTMAS should be the choice in your case.
    Regards,
    Nimish

  • User exit; Article master SAP Retail for MVKE table?

    Is there a user exit in SAP Retail for the MVKE table?
    The articles is maintained in a third-party system and are transferred to SAP via Idoc. For sales sets, article category = 10, these requires a item category = ERLA in SAP (MVKE-MTPOS) so that the sales set "explodes" in the sales order.
    The third-party system doesn't maintain sales org-spesific data for the articles, therefor we use one ref.article for all article groups. And because sales sets exits in many article groups, we found it difficult to have ref.articles for all of these article groups.
    Also the article type is also "normal",so the only way to differentiate the sales sets, are via article category. But since SAP has no link between article category and item category in customizing (as far as I know), I wonder if there is a user-exit to set the item category based on the article category?

    Hello Sonika,
    WE_PLU is generally used along with the POS interface.
    Please check this for more details
    http://help.sap.com/saphelp_470/helpdata/en/ed/df673c86d19b35e10000000a11402f/frameset.htm
    Article Master Uploading in IS- Retail system
    This is basically your call depending on what data the message type is intended to carry and the use. ARTMAS should be the choice in your case.
    Regards,
    Nimish

  • Article Master Data Extraction from IS-Retail System

    Hi,
    I have one IS-Retail System with me. I want to extract Article Master data from IS-Retail System.
    Is there any specific procedure to do this? If yes, can anybody tell me the procedure?
    Waiting for your response...
    Cheers,
    Yash K

    Hi Yash,
    you can use transaction BD10 to extract articles. Note that you should change to message type "ARTMAS" instead of "MATMAS".
    Best regards
    Michael

  • Asset Master Uploading from Legacy

    Hi All SAP Gurus,
    I am doing the Asset Master Uploading from the Legacy System. I am able to upload the data from transactions AS91, OASV. But I am facing a peculiar problem.
    I want to uplad the balances in the middle of the year i.e. 1st Feb 09. My Fiscal year is from January to December. So whenever I am uploading the data & afterwards I am doing the Depreciation Run, the system is calculating the depreciation from January itself. I have maintained
    The Date of the Legacy system transfer as 01.02.2009.
    Last period of Posted Depreciation in Prv. System as 2009/01.
    Can anyone tell me what is the problem? Whether this can be taken care by the shortened fiscal year?
    Thanks in advance,

    When you want that SAP calculates the depreciation for Januari the set-up is:
    Take over date 31-12-2008 and last depreciation run old system per 12-2008
    Whit this you have the option to run the depreciati for Januari or to do an uplanned depreciation that you post in Februari January and February
    When not:
    Take over date 31-01-2009 and last depreciation run old system per 01-2009 in that case you have to upload the depreciation from period 01 with AS91?
    There are some other options to!

  • BAPI to change the articles in article master

    Hi all,
    Can you please let me know the BAPI to change the details of an article in the article master.
    regards,
    Sharadha

    and the most important step,
    Loop over your articles to be created.
    call the BAPI_MATERIAL_MAINTAINDATA_RT
    and do   a BAPI_TRANSACTION COMMIT
    ENDLOOP
    Important!!!!! Do a commit work after every article Bapi Call !!!
    If you will not follow this rule, you will have a data inconsistency in classification data

  • Article hierarchy in article master

    Hi
    While creating article master, in basic data view system populates a article hierarchy by default and its not editable. let me knowthe configuration setting bejind this
    regards
    Satyaprasad

    Hello,
    Perhaps the following Article Hierarchy Data transactions can help...
    WMATGRP01 - Create
    WMATGRP02 - Change
    WMATGRP03 - Display
    WMATGRP04 - Delete
    WMATGRP05 - Activate
    WMATGRP06 - Copy
    WMATGRP07 - Deactivate
    WMATGRP08 - Simulate
    WMATGRP10 - Reorganize
    WMATGRP11 - Export
    Regards
    Olivia

  • Inbuilt RFC/IDOCs to upload ITEM MASTER DATA in SAP IS Retail system

    Hi,
    Kindly let me know the inbuilt IDOCs/RFCs to upload ITEM MASTER DATA in SAP IS Retail system.
    Otherwise let me know the tcode to check the inbuilt IDOCs/RFCs in SAP IS retail system or let me know all MASTER DATA related inbuilt IDOCs/RFCs in SAP IS retail system.
    Thanks
    Ramesh

    Hi,
    Please check below link. hope it helps you to answer your question
    http://wiki.sdn.sap.com/wiki/display/Retail/SAPRetailPOS+Interface

  • Rounding Profile Issue in Article Master - IS Retail System

    Hi,
    We have an Issue with the Rounding Profile in Article Master of IS Retail System.
    Rounding Profile (50) Maintained at Purchasing View of Article Master (MM41 & MM42) and the same is getting copied to Logistic DC View and Logistic Stores of Article Master
    Scenario: -
    DC Rounding Profile is being incorrectly applied to Store to Distibution Ceter STO
    Return STO between Stores (xx01 u2013 xx10) and Distribution Center (Site u2013 XXAA and XXBB)
    Store is returning the Stock to the Distribution Center. While creation of Return STO, System is taking the Rounding Profile QTY maintained at Purchasing View of Article Master Record.
    Configuration Done:
    The Rounding Profile Field hide at the Logistic: DC View and Logistic: Store View of Article Master (OMSR  MARC-RDPRF).Hence the Rounding Profile Field at Both Logicstics View got disappeared in Article Master Screens. But still the entries are visible at MARC Table.
    Issue:-
    The system is picking the Wrong Qty (50) instead of 1 Qty while creation of Return STO between Stores and Distribution Center.The System is prompting the Qty 50 (Which is maintained in Purchasing View of Article Master but No Rounding Profile is maintained at Logistic: DC View and Logistic: Stores View of the same Article).
    REQUIREMENT:
    While creation of Return STO between the Stores and Distribution Center the Rounding Profile should be inactive.
    The system should pick up the Right Qty entered instead of Rounding Profile Qty.
    Your valuable suggestions or advises are highly appreciated...
    Regards,
    Sateesh.Kandula
    Edited by: VijayaSateeshKumar Kandula on Nov 8, 2010 11:52 PM

    Hi,
    We have resolved this Issue using the Configuration Change in OMSR and programatically.
    Thanks
    Sateesh.Kandula

  • Asking for help about modification to article master data of retail system

    Deal All,
    Is there any one can tell me how to modify the article master data in retail system ?
    I have tried to deal with the requirement by BDC and calling the function BAPI_MATERIAL_MAINTAINDATA_RT,
    but both of the two approaches can not update the customized fields in the table MAW1.
    For BDC, the changed data can only be update in debug mode.
    For the function, no customized fields of table MAW1 are taken into account as to its parameters.
    Can anyone tell how I should do ?
    Thanks in advance,
    Kevin

    Hi Kevin,
    Try FM: MATERIAL_UPDATE_ALL_RETAIL
    Thanks,
    Dharmishta

Maybe you are looking for