Articles aren't uploading nor updating

Hi
Articles aren't uploading nor updating in Folio Builder. I started updating few articles and few updated and than stoped. Now it wont upload anything. Even if i try a new folio etc.
is there a problem in Adobe's end at the moment. I've got an urgent deadline that I must meet.
Thanks

The issue has been resolved now. There was a breif server side issue during maintainance which caused this. For future reference , take a look at : http://status.adobedps.com/ for any notifications.

Similar Messages

  • Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

    Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

    Hi Tech5Apple,
    Thanks for visiting Apple Support Communities.
    If you continue to see unexpected behavior when accessing the iTunes Store, the troubleshooting steps in this article can help:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    All the best,
    Jeremy

  • I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones.

    Hi!
    I've just updated my iPad to iOS 7.02 and I'm not able now to download new apps nor update the version of the existing ones. All of them are "waiting"... for ever.Even, when trying to download a new app, a "dratf" icon appears on the ipad, not the app's own icon...
    I've tried to switch off and on the iPad, disconnect and reconnect the itunes id... and nothing works. Even deleting an app, to download it again, doesn't work. It even doesn't ask for my password!!! (Stays with the small square with a circle around, the one that gets "bolder" while downloading... but it doesn't get bolder now. Just stay...).
    Any suggestions? I wouldn't like to reset the iPad, since I've got data in some apps that I wouldn't like lo loose...
    By the way, I can not either delete some apps with thos "draft" icons... even when the alert that appears when trying to do that is shown and select "ok".
    Thank you in advance!
    Best Regards,
    Carlos.

    Hi,
    Thank you, Once_was_lost, but it doesn't work either. I tried it yesterday as an option (I think you're referring to the options of those apps in the settings app).
    The problems are still here... I've been able to update some apps using the PC itunes (connecting the app to it), but all the other apps are still "wating", and I have two new strange things:
    * I cannnot remove the apps that are downloading (at least those that are supposed to be downolading ) . But I could remove one from the PC... and now there is an "empty line" in the "to update apps list".
    * Stranger: though I cannot download new apps or music from the store, I can do in-app purchases!!! In that case, I'm asked for the password and the item downloads. How is it possible?????
    I can download with the same user in the PC, in the iPhone... but not in the iPad .
    I'm getting mad...

  • Unable to upload the updated/modified Report template (rtf file) in siebel

    Hi,
    I am unable to upload the updated/modified Report template (rtf file) if already exists in the local database.
    Initially I have uploaded a rtf template, generated xliff, registered it and can view the report from the registered view. Later I have made few changes to the rtf template, in the reports template view, I have uploaded this. When i run the report in the registered view, I am able to see the earlier version and it doesnt show me the updated changes.
    I am using 8.1.1.3 siebel and BIP 10.1.3.3.1 on local.
    Looking at the metalink found "How To Upload Modified RTF Template Files In The Siebel Application For BI Publisher Reporting [ID 1136418.1]" which is related to server but I am working on local database
    Please find attached the template, xml file. can you please look into this and update me ASAP
    Thanks,
    RV

    Hi,
    Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
    We have applied 8.1.1.3 patch on 8.1.1.0
    below are the steps followed
    Reports are not generated after 8.1.1.3 patch installtion.
    we have also followed to below steps mentioned for this issue in oracle support.
    "In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
    change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
    1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
    2) Import the 4 SIF files in the following order:
    S_XMLP_REP_TMPL_02112010.sif
    SBL_XMLP_REPORT_SELECTION_FLG.sif
    Report Template BC.sif
    Report Template Registration Applet.sif
    3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
    Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
    we still not able to generated able to generate reports even after following above steps.
    Thanks
    Sean

  • My iPad 2 crashed after trying to install ios 8.1.2 update. It cannot restore nor update.

    iPad 2 will not respond to iTunes recovery nor update now.

    Try these instructions.  Follow them exactly.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • Mac OSX SUS - Why aren't the latest updates offered for some software

    For instance, on my sus, Quicktime 7.6.4 is the latest version offered for leopard. 7.6.6 is available on Apple's site. Is there actually a 7.6.6 update others can see on their sus, or is this a universal issue - and why aren't the latest updates available?
    Thanks

    I just checked my 10.6.3 SUS server at it appears to have that Quicktime 7.6.6 update listed. The size is listed as 68.5 MB and the post date is 03/30/10. My SUS Server Admin interface shows a "Last Check" time of Apr 13, 2010 3:00:00 AM.
    I have wiped and reinstalled my SUS server several times dealing with the "missing 10.6.3" updates bug reported many times in these forums so that may be why my server is displaying the Quicktime 7.6.6 update.

  • HT1338 I just uploaded an update to Mountain Lion today mail no longer works

    I just uploaded an update to Mountain Lion today mail no longer works.

    After I ran theupdate yesterday I got a message that the update did not complete. When I tried to run mail I got a error message that mail could not run. When I rebooted and tried mail again I got the same error. I tried to load the last mail update from the apple store, but could not run it because it was unsigned.

  • I have a website for my artwork.  I had a PC and. Now an iMAC.  I've used Dreamweaver to update the website.  I used to go to Filezilla on the PC a upload the updated pages which would then show updated on the internet.  What file like FileZilla should I

    I have a website for my artwork.  I had a PC and. Now an iMAC.  I've used Dreamweaver to update the website.  I used to go to Filezilla on the PC a upload the updated pages which would then show updated on the internet.  What file like FileZilla should I use?

    You can download it here:
    https://filezilla-project.org/download.php?show_all=1
    Click the Source Forge link - make sure you reject offers for any other software during the installation, Source Forge usually will ask you to install other stuff in addition to what you want (Filezilla).
    It works well on Mac.
    Dreamweaver also has built-in FTP functionality if you want to check that out.

  • Duplicate Article Names Deny Content Viewer Updates

    A mistake on my part, but an interesting "glitch" either way.
    Apparently if you build a folio and two articles have the same name, updates don't register in the Content Viewer on the iPad for that app. I was re-adding articles into an exisiting folio (to enable PDF formats for pinch and zoom capability) and accidentally named two articles the same. Updates weren't showing up for any of the new changes, even to other articles, until I noticed the oversight and changed the name of one of the duplicate article names.
    Obviously two articles shouldn't have the same name because it would mess up navigation in the app. But it shouldn't completly deny the ability to download app updates. Perhaps an error message should be added if a designer tries to add an article and name it with something that already exists?

    Unfortunately, known feature. Current native viewer doesn't support update, it will be in v30 (this saturday).
    So, delete folio and download again.

  • I cannot download nor update apps through Apps Store, error message states that app cannot be downloaded, to try again later, this has been happening for the  last five days. Help!

    I cannot download nor update apps through Apps Store, error message states that app cannot be downloaded, to try again later, this has been happening for the  last five days. Help!
    It started when tryung to update Twitter. Now the problem is with every app I try to update or download.

    I have this issue as well. The App Store icon indicates there are updates available but when I open the app a popup says it can't connect to the store and the screen remains white. I have tried a hard reset (power & home button) and several other suggestions I have found throughout the forums here without success.

  • Prime 2.1 upload of update files failes

    When trying to upload some update files I get an error "An error occurred while uploading file." and then, after some minutes "There was an error uploading this file. Waited 180 seconds for upload to be complete, but it was never completed.".
    This happens with "pi_2.1device_packs_6-49.ubf" and "pi212_20141118_01.ubf" on PI 2.1 (2.1.0.0.87).
    I am following the update instruction in Release Notes (http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1-2/release/notes/cpi_rn.html#pgfId-52962).
    I am using the root account in GUI and already restarted NCS.
    Does anyone have a solution?
    Thanks

    I tried it using Chrome it works perfectly fine. It may be mostly a browser issue. I would recommend to try another recommended browser.
    Also, see if you can use IE for this (7/8/9). In case you get an error try from 'Internet Options' * select 'Security' tab * click 'Custom Level' button * Disable the IE option 'Include the local directory path when uploading files to a server' .
    -Thanks
    Vinod

  • HT1414 Trying to upload software updates on ipad2 when screen froze

    Trying to upload software updates on ipad 2 when the screen froze with the message iso6 and an arrow and configure. When pressed the message becomes update complete just a few more steps to follow. But it will not continue and will not escape when pressing on/off and home together. I'm stuck.

    If you can shut down, try Recovery Mode.
    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • My itunes can not be neither uninstalled nor updated , message .msi file package pops up whenever I try to do anything

    My itunes can not be neither uninstalled nor updated ,  a message saying that source file is missing which is " itunes64.msi" file is missing
    the program is intsalled but I can't use it or uninstall it 
    what can I do ?

    See my post in this thread:
    https://discussions.apple.com/thread/4661853

  • HT1688 my device was not registered as part of the Developers Program and now my devices are not working, i can not restore nor update my devices... any suggestions? i was running my devices on iOS 7 Beta that i downloaded back in August

    my device was not registered as part of the Developers Program and now my devices are not working, i can not restore nor update my devices... any suggestions? i was running my devices on iOS 7 Beta that i downloaded back in August

    If you're not a registered developer, it means you've stolen Apple's software.  Now you come to an Apple forum and ask for help?  You're lucky you're not being prosecuted!
    You can receive no help for stolen software here.  Enjoy your iBrick.

  • IPhone 5 froze while uploading newest update (I believe ios 7.4?).

    iPhone 5 froze while uploading newest update (I believe ios 7.4?).  Plugged my phone into computer and clicked to update.  I left the phone to upload for a couple hours and returned to see the black screen with white apple logo, and also see that thin upload bar, which seems to have gone across the phone -- looks like the upload should be finished.  But the phone is frozen.
    I can't turn the phone off at all.  Tried holding on/off button down to turn the phone entirely off, but nothing happens.  I tried unplugging from computer and replugging it back into the computer.  Nothing happens.

    No, that didn't help.  I went over to the ATT store where I bought the phone.  They showed me how to do a "soft restart".  So now instead of seeing the apple logo on a black screen, I see the round blue logo with the music note in it, with a small font "iTunes" below that.  And below that I see what looks like the electric cable that plugs into the iPhone.
    The folks at ATT said that if I now plug it back into my computer itunes, it should reset my iPhone.  So I just tried it. Nope. The computer makes the sound as if it's recognized the iPhone plug in, but absolutely nothing comes up on my computer screen. 
    They also made an appointment for me at the Apple store, but that's not until Tuesday.
    Any other bright ideas out there?
    Thanks.

Maybe you are looking for

  • Import Export Imges in JAVA to binary code with firebirds

    I'm having problems with a java netbeans. I want a start a disccus about how we can import and export images from and to, binary code. We can play with Blob variables, but i dont know how can we insert to a Firebird database and how we can read this

  • FRM-40011 Error on Oracle 9i AS

    Hi! I have a form deployed on Oracle 9i AS Release 2. The form is compiled on forms 6i -Patchset 14 and when I try to access this form on the client PC I get FRM-40011 error that the form has been created using lower version of From builder. If I com

  • Generate Manufacturing Date

    Which control is responsible to generate Manufacturing Date?

  • Anti Virus Software - Do I need?

    Just bought and new MacBook Pro with Mac OS X(10.6). Had heard with Mac's there is no need to purchase Anti Virus Software such as Norton Anti Virus that I currently still have a subscription for with my old Dell. Should I continue this subscription?

  • Creating scale conditions LSMW / COND_A02

    Hi, I'm trying to create multi-dimensional price conditions in LSMW. All works fine, the condition is created but no the scales values. The idocs finish without any error so I can't find what the problem is. If any can help me it will be fantastic. T