Articles on Printing in VC7.0

I was wondering if anyone had some links to solutions of printing the results of a VC application and it looksing decent.

Hi
I think you want to print VC model. If yes, you need to add one form in your model. Create 'Pushbutton' from the toolbar of that form. Select system action & select commond 'Print'. You will 'Print Page, Print Table & Print Screen' etc. If you want to print complete model then select 'Print Page'. Then when you deploy the model, you will get 'Print' button in your model & when you click this button at run time then you wil get normal print window as popup. from here you select printer which you are connected to & print. Also you can install PDF converter & you can convert the VC page to PDF with the same process only.
I have not seen any document for this, but in VC modelling guide you will get this.
Regards
Sandeep

Similar Messages

When printing off the web, I get very wide margins. a 2-page article, will print in 46 pages!

When printing off the web, I get very wide margins. a 2-page article, will print in 46 pages!

Try resetting your printer margins in '''about:config'''.
Type '''about:config''' in the URL bar and hit Enter. 
''If you see the warning, you can confirm that you want to access that page.''
Filter = '''print_margin'''
Right-click and select '''Reset''' for both '''''margin_left''''' and '''''margin_right''''' for that particular printer, and then restart Firefox. If you have ever used other "printers" in that Firefox Profile, you'll have separate groups of preferences listed for each printer.

Why will some website articles not print preview or print more than part of the document in firefox. I sometimes have to go to IE to be able to print the entire document.

I often want to print an article from a website. Many times when I print preview, it will only show the first, second and maybe last page, but nothing inbetween. I have tried printing it anyway but nothing inbetween will print. My solution has been to go to Internet Explorer where I have then been able to print preview and print the entire article. This is annoying and takes extra time. Is there a setting that I need to make in order to eliminate the problem

Top left (Orange) Firefox button, Print, Print Preview. Does everything look correct? You may also click the icon that looks like a "DISK" to save, which allows you to save it to your computer and CTRL+P will allow you to print.

I having difficulties connecting to a printer on a workgroup in my office

A friend configured the workgroup on my office pc and named it Sever. he connected all the computers to the server without connecting the printers so i decided to add a printer to the network so that laptops connected wirelessly could access the printer.
i configured it by going through a tutorial i found on microsoft site about how to "add a printer to a home network".
it worked fine until it stopped working two days later. all office document could identify the printer on the server but cannot print. other computers and laptops can print but my laptop connected wirelessly cannot print.
i decided to add the printer again by following the same procedure of going to "devices and printers" and clicking on "add a printer" and typing the address of the printer to install drivers and start printing as i did initially,
however, this time around i was asked to enter username and password.
i don't know if this username and password request is from the sever ( desktop pc running windows 7). all attempts to enter the username and password prove futile.
i really need help as i cannot afford a new printer right now.
i want an in-dept knowledge on joining and creating a homegroup/workgroup/domain and why i cannot open and access files and folders on other computers connected to the network and also why i am always prompted to enter a username and password before
i can access files on other computers connected to the network
can i still connect the Pcs to share one printer without login in username and password as the previous one worked without that?
THANKS FOR YOUR HELP

Hello Mattern Adjei,
Are all these computer Windows 7?
If my understanding is right, now some computers in the office can use the printer and some can’t.
Do all computers need to type username and password when you access network folder?
Please check have you made any changes before this issue.
Please take a look at the following article about printer troubleshooting.
http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab2&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
1. Check network connection, try to ping the IP address of the printer
2. Run printer troubleshooter
3. Update the printer driver
How do you access the folder or file? Are they share folder?
About how to create share folder, we could take a look at the following article.
http://windows.microsoft.com/en-us/windows/share-files-with-someone#1TC=windows-7
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Print issue in SSRS report

Hi ,
I have a report in production server. The client took a print out of the report which is accessible from report server URL. The issue pertaining for this report is, some of the letters in the report such as 'ti' and 'le' are missing when the client is taking
a copy of that report. I went through my report design and had downloaded in pdf and other format, i havent seen or observed any kind of issue from my side. I could observe the data is fine, but, I wonder and i couldn't able to trace what went wrong and how
the letters are missing when the print out of the report is being taken. I am thankful for your answers and valuable suggestions.
Thanks & Best Regards,
Ram.

Hi Ram17,
According to your description, your report missed some letters when printing. Right?
In this scenario, you find no issue if your download the pdf format report. It supposed be to no issue on Reporting Services side because the pdf rendering is the same rendering behavior as the print view. So please check the printer and the system
environment. It has reported some similar issues in Windows XP. Please refer to a KB article below:
Print jobs initiated in a Windows Server 2008 and Windows XP point and print environment may have missing characters
Reference:
Letters missing when printing
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

On the Wall Street Journal website, I am not able to print out of the print format. Never had a problem before with this.

I click on the print icon under an article in the Wall Street Journal. A new window opens with the article in print format. When I print, I get blank paginated pages equaling the length of the article. On the top left hand corner of the page will appear the title of the article; on the top right hand corner will appear the web address of the article; on the bottom left hand corner will appear the pagination; and on the bottom right hand corner will be the date and time of the printing. This is just how any article would print; the only difference being that I'm not getting the content of the article printed.
This has only started a couple of days ago. I do not have this issue with any other publication, yet this problem doesn't exist with other browsers.

I don't have a WSJ account to test... Here is some general advice:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
This will open a window listing the site's cookies, which you can remove individually.
Then try reloading the page and logging back in. Does that help?

Since latest upgrade I cannot "print" or show "print preview" from any web page. This is true of both of my printers and I have followed directions on plug-ins and have reinstalled Firefox etc. I am about ready to switch to Internet Explorer! w

Since upgrading Firefox, it doesn't respond when I click on print and/or print preview while displaying web pages.. No error message, just no response. I tried using both my printers..a HP and a Canon and get no results with either. I have no problem printing from any other place (including "Print" instructions within web pages, usually). I have recently upgraded my desktop (Dell Vostro 220) to Windows 7 and it went smoothly. The Firefox upgrade came at about the same time, so I don't know if Windows 7 is part of the problem. I need be able to print from the screen of web pages!

Hi jjoyceeric,
Have you looked at the Knowledge Base article [[Firefox prints incorrectly]]? There is some good troubleshooting information in there. I would suggest that you try resetting your print settings.
Hopefully this helps!

I hope it's Kappy reading this. My HP Laserjet successfully installed but can't create a print queue...

Hello Kappy - Thank you for persevering with my printer issues. Firstly, I use Firefox, recently updated & as yet have not discovered how to monitor downloads. The software for HP Laserjet 2200 was eventually automaticallly, and therefore correctly, installed.The Add Printer Pane accessed via the + button in the Printer & Scanner window is blank - the Name & Location and Print Using & Add areas are all grayed out, therefore I can't locate the printer driver even though it is in the Printer folder. I messed around with HP Direct Protocol & Line Daemon functions, entering my IP address, just to see if I could locate the printer driver - I could. However, I get a pop-up window which says 'Unable to verify the printer on your network' but it gives me the option of going ahead anyway, which I did. I was able to create a print queue, able to give a print command, the printer window opens, but the printer appears as 'busy', but of course it's not printing. To look at the issue from another perspective: previously I was running 10.5.8 on my old Power Mac G5 and a week before I shifted over the iMac I paused the printer but when tried to resume printing I got a pop-up message saying IPadmin > enter administrator name + password. Which of course I couldn't do - I discovered this was a bug afflicting10.5 & 10.6 operating systems; the only way I could get around it was by re-creating myself as a new administrator, which I did, and got the printer going again. So, if I have a "Network" printer perhaps there's another route to get the driver recognized... What do you think?
Alex Carr

Morning Alexander Carr,
Thanks for using Apple Support Communities.
Use this article to troubleshoot printer issues in OS X.
For more information on this, take a look at this article:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Best of luck,
Mario

How do I customise my macbook pro to print at A1?

How do I customise my macbook pro to print at A1?

http://support.alltrails.com/support/articles/27397-printing-custom-paper-sizes- with-a-mac

The print menu on my MacBook Air won't allow me to select two sided printing, how do I do this?

Hi Community,
I recently purchased a MacBook Air (my very first Mac) and I cannot access all of the printing options when I print. I am able to print and the printer driver was downloaded, but my options are limited. I cannot enable two sided printing, which is something I was able to do with my current printer via my old laptop. I am in grad school and have a lot of journal articles to print and read that are 60-70 pages each. I'd much rather print these two sided to save paper. I have the latest version of OS X (version 10.8.5) and my printer is an HP Laser Jet P2035n.
Can anyone help me fix this issue so I don't have to use my old laptop to print?
Thanks,
Melissa

Read the post by iron badger at the bottom of the page.
Check out the last post by iron badger. http://h30499.www3.hp.com/t5/Macintosh-Compatible-Products/LaserJet-P2035n-Doub le-sided-printing-Mac-OS-X-10-6/td-p/2359047#.UjybmBb3YzU
Best.

How to print 'booklet' on Officejet 4500 Wireless?

The office I work in has just bought a new Officejet 4500 Wireless, but we are unsure how to print a booklet. With our old printer, the option came up once you hit print, but now it doesn't. Does anyone know how to print a booklet on this type of printer? Thanks for advice. The opertaing sytem is Windows 7 if that makes a difference.

Hi there kittypotpie,
This article covers printing booklets via office. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Why doesn't mail print the .ics details shown on screen?

I have colleagues using outlook and I of course use mail.
When they send me meeting requests I get a .ics file I can use in iCal.
The details of the .ics file (e.g. agenda) displays OK in mail.
But when I want to print the mail to take to the meeting, it just shows the .ics icon, nothing else.
Browsing the discussions, this was a problem back in 2007 in Tiger, but fixed there and subsequently.
Why have we got this "feature" back now in Lion? (The old fix - print from Get Info in iCal - doesn't work in Lion. Must be the cheap leather finish)
Any cures?

Have you tried using the '''Print''' item at the bottom if that eBay page? 
Or is that what you are using?
Overall it isn't unusual for "print" to be a bit different than what shows on the "screen", that page may use @media for "screen" and for "print". The '''Print''' item on that page could be the difference, or the web browser might be following that code is you used the '''Print ''menu item or button''''' in Firefox. 
http://www.w3.org/TR/CSS2/media.html#media-types
Typically, the '''@print''' CSS code is used to hide navigation menu's ''(can't "navigate" to a different web page from a sheet of paper)'' and maybe advertisements ''(can't "click" on an ad that is on paper)'' from being printed out so that only the text of an article is printed to paper.
Basically, it's probably not a fault with Firefox, but rather Firefox following the commands on the page put there by the person who authored that page, or a standard CSS "style sheet" used by eBay.

Why doesn't my print-out look like the screen view?

This happens every time I use Firefox.
Whenever I try to print a listing from Ebay, the main picture is omitted from the print-out. Here is an example. This first link is to a screen-shot (Fn and PrtSc) of a typical listing on Ebay:
http://s1176.photobucket.com/albums/x327/xvqgp/Firefox
On the PhotoBucket page look for the image FirefoxScreen.jpg
There's a big picture of the item at the left-hand side of the page.
Now take a look at what I get when I use the Firefox 'Print' command (this is a scan of the printed page):
On the same PhotoBucket page look for FirefoxPrint.jpg
There's a big blank space where the main image should be!
I have not been idle and have checked a few things before posting this question:
1) I have attended to the print settings as highlighted in the helpful Firefox article on printer troubleshoting. It has not cured the problem.
2) From the same article I have tried the 'Print' function on Internet Explorer. While it pains me to say this, I get the correct printing from Internet Explorer.
3) Operating Firefox in 'Safe Mode' has not removed the problem.
4) Operating in 'Normal' mode but with add-ons disabled has not removed the problem.
5) When I hover the mouse over the main image on the Ebay page I get
javascript:;
in the bottom left-hand corner of the screen. Might this be a clue or is it a red-herring?
I would be most grateful for help.

Have you tried using the '''Print''' item at the bottom if that eBay page? 
Or is that what you are using?
Overall it isn't unusual for "print" to be a bit different than what shows on the "screen", that page may use @media for "screen" and for "print". The '''Print''' item on that page could be the difference, or the web browser might be following that code is you used the '''Print ''menu item or button''''' in Firefox. 
http://www.w3.org/TR/CSS2/media.html#media-types
Typically, the '''@print''' CSS code is used to hide navigation menu's ''(can't "navigate" to a different web page from a sheet of paper)'' and maybe advertisements ''(can't "click" on an ad that is on paper)'' from being printed out so that only the text of an article is printed to paper.
Basically, it's probably not a fault with Firefox, but rather Firefox following the commands on the page put there by the person who authored that page, or a standard CSS "style sheet" used by eBay.

How can I add a new printer in Classic?

I recently re-installed OS X following a printing problem on my iBook G4 which has system 10.3.9 and Classic. All works fine except that I still need to use Classic for one application and to print from it. I have an HP Deskjet 5150 that used to work fine. I can print on it from OS X but in Classic the printer in not in the chooser nor in Utlity Printing Service so obviously I can't select it to try to print. What do I have to do to get the printer in chooser? I also want to put Acrobat writer in the chooser but I imagine it's the same process?
Please help I've spent a long time on it already without success!

I've requested a moderator move your thread to the appropriate forum. No action is needed on your part.
Just for your info, MacBooks can't run Classic, so your question is not as likely to be known the answer to by MacBook owners unless they have had previous experience, or also have machines able to run Classic.
I've written a FAQ that contains some articles on printing in Classic*:
http://www.macmaps.com/printersx.html
Not sure which one will work for you.
- * Links to my pages may give me compensation.

Cannot Print. "The Active Directory Domain Services is currently unavailable"

Hi there
I cannot print and I have not been able to find the fix via existing forum threads.
System:
Win 7 Ultimate 64 bit German - Profile language is Danish (installed a week ago and completely windows updated)
Office 365 Small Business Premium
HP DV8 Laptop. i7, 512GB SSD, 8GB RAM
HP LaserJet P1006 USB printer.
Problem
No matter if I try to print from IE, Notebook, Word 2013 or anything else, I cannot chose my printer (P1006).
If I try to Add Printer in Word 2013, I get the "The Active Directory Domain Services is currently unavailable" error.
In Devices and Printers, the P1006 is visible, but there is no driver installed.
Trying to install the correct driver:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3435683&prodTypeId=18972&prodSeriesId=3435682&swLang=8&taskId=135&swEnvOID=4063
only creates a general error during installation: "Printer Software Installer has stopped working - A problem has caused the program to stop working correctly. Windows closes the program and will notify you if a solution has been found"
I have tried all the solution software from Windows, from HP (for the laptop and for the printer) - but nothing comes up with any details or suggestions.
What should I try?
Absolutely everything else works perfectly on the system.
Reffered here via http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/cannot-print-the-active-directory-domain-services/1cf47626-a2cd-4b7a-94b6-10cbc8ab02b0

Hi,
I suggest you try the following:
1. Try the steps in the following article:
Troubleshoot printer problems
http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems
Fix printing problems by resetting the print spooler
http://support.microsoft.com/kb/2000007
2. Let us try updating the printer driver which might help you in resolving the issue.
Click on the link below for more information on updating the printer drivers.
Find and install printer drivers
http://windows.microsoft.com/en-US/windows-vista/Find-and-install-printer-drivers
3. Remove the printer and add it again:
Go to Control Panel
  Select Printers
  Right-click on Add Printer
  Select Run as Administrator
Now try to add your network printer
Also a thread for your reference:
Error message when attempting to print: Active Directory Domain Service is Currently Unavailable
http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/d6212275-24d6-4168-830a-9441f861cb76
Hope this helps.
Vincent Wang
TechNet Community Support

Articles on Printing in VC7.0

Similar Messages

Maybe you are looking for