Artifact for Office Picture Manager after install of Office Pro Plus 2013

Upgrading from Office 2003 to Office 2013, with the assumption that the Office 2013 install first removes all previous versions before installing.
For some users, running Windows 7, with Microsoft Office 2003 SP3 and the 2007 compatibility pack installed, after the Office 2013 Pro Plus installer runs, whenever an Office 2013 Access application is launched the user gets a message box  as shown
below.  None of our Access VBA have Office Picture Manager in the reference list, so it should not be an issue caused by any Access applications.
Since the Office Picture Manager is no longer part of Microsoft Office as of Office 2013, this is a problem.  Several workarounds have been posted on several blogs on the Internet for installing Office Picture Manager from an earlier version on a computer
with Office 2013 installed to eliminate the error, which of course assumes that it is desireable to have Office Picture Manager.
My position is that there should be a fix for the orphaned artifacts calling for Office Picture Manager when launching Office 2013 MS Access, that does not involve the installation of a deprecated product.  Multiple searches of TechNet come up empty
in that regard.
Is there a fix for this issue forthcoming, or does anyone have an answer that does not involve installing a backrevved Office Picture Manager just to make the error message shut up?
Clean install of the OS is not to be considered a solution.  There are too many computers involved to even consider that to be acceptable.  I would rather have a registry cleanup script that could be pushed through GPO than to have to go to each
computer and run a FixIt, so please try not to push the FixIt option either...
Thanks!

Always, the in-place upgrade doesn't remove all traces of Office 2003 from your computer, and this will cause unexpected issues for the new Office.
Actually, instead of doing a in-place upgrade, you can perform an
uninstall-upgrade to Office 2013. When uninstall the old version of Office 2003, you can make sure to remove any traces, and then install the new Office 2013.
For how to do an uninstall-upgrade, you can refer to this blog post:
http://blogs.technet.com/b/odsupport/archive/2011/04/06/how-to-perform-an-uninstall-upgrade-to-office-2010.aspx

Similar Messages

  • After installing Mavericks, office for mac 2008 doesn't work properly

    After installing mavericks, office for mac 2008 is slow, unresponsive a lot of the time, and slows my whole mac down if i want to do other things at the same time. Is there a solution that doesn't involve spending loads of money on a newer version of office for mac?

    All Good. Are there any pending updates for MS Office by chance? Just check under the Help menu in the top Menu when you open Word.
    I highly recommend you to reinstall the latest Office 2008 update > http://www.microsoft.com/en-us/download/details.aspx?id=36897 Note that Office 2008 is not supported by Microsoft anymore (thanks Mende1 for the link)
    Pete

  • How do I open a TIF image email attachment using windows photo gallery as the default instead of microsoft office picture manager?

    I have an internet fax program that sends faxes directly to my email as a TIF image attachment. When I download the attachment it lists Microsoft office picture manager as the default program to view the image. I would like to change the default program to view the image to Microsoft photo gallery. How do I change the default program to open an image attachment in firefox? Thank you

    OK I have it figured out! I was using google mail. For what ever reason the imac/pc safari using google would not display the PDF in the email even though the ipad/iphone did. I tried a different mail system through work (not google mail) and it EVERYTHING works GREAT!!!!! Wow, a lot of wasted time over something that was actually working.

  • MS Excel Crashes after installing Live Office.

    Hi,
    I am having BOXIR2+SP3,Live Office XIR2, and Windows XP SP3 in my Laptop.
    Ram-1.5 GB
    After installing Live Office , MS Excel crashes.
    The Issue is happening on only one machine and is intermittent.
    Tried uninstalling Live Office>Excel
    Install Excel>Live Office.
    Didn't work.
    Can anyone help me with this issue urgently?
    Thanks in advance,
    Regards,
    SR

    what is the workflow for the excel to crash ?
    Did you try to clear the registries after uninstalling?
    Is Win XP SP3 the office version you are using?
    -Shreyash.

  • Firefox Not Responding after Installing Microsoft Office 10

    After installing Microsoft Office 10 (student and home edition) on my laptop, I noticed that Firefox is going into the state 'Not Responding' every time I access it - it takes about 10 secs to 'think' and then comes back online. It continues to do this every time I want to access a new page, new link, click on mail in Yahoo Mail, etc. Has anyone experienced this issue?

    1) Check the $IAS_ORACLE_HOME/Apache/JServ/etc/logs/jvm
    has servral logs for OACoreGroup Servlets that are initialied
    2) You might have to enable the debug option in jserv.properties and jserv.conf
    (find IsItWorking.java in Metalink for the appropriate note )
    3) If this is 403 forbidden then check trusted.conf alongside httpd.conf
    pls keep posted about how this issue got resolved.
    Sunil
    JSP not responding after installing 11.5.10.2 on IBM
    HACMP
    i have finished installing Oracle applications
    11.5.10.2 on IBM clusters (HACMP version 5.1)its a
    multinode setup with mutual failover. other
    applications are working fine. the installation went
    well. but the final part on the middle tier , during
    the post install checks it says JSP not responding. I
    checked the apache error-log and saw the follwoing
    entry
    [Sun Apr 23 21:04:21 2006] [error] [client
    172.29.200.74] client denied by server configuration:
    /appl/oracle/devcomn/portal/
    DEV_erpappssrv/oprocmgr-service
    >
    that bafles me because that ip address was not used
    in the installation. its the persistent ip address of
    the HACMP. the service ip that was used in the
    configuration file was 172.29.200.75
    however there is no mention of this in the error
    log.i also edited the oprocmgr.conf in the
    Apache/conf directory after which i dont get the
    error however the servlets pages then hangs and
    returns page cannot be displayed error on internet
    explorer. no error is registered on the error log.
    the jdk am using is 1.4.2 which is the recommended
    one.
    what this means is that i cannot access the self
    service pages and as you know you need self service
    pages to access the application in 11.5.10.2
    i opened a TAR with oracle on 8th April 2006 and till
    today i have not been able to get a solution.
    I am hoping that i will get someone in this forum who
    has met a similar problem or who has an insight into
    how we can solve this problem already am weeks past
    the target go live!!!
    Please Kindly help
    Jeremiah Ochieng

  • Pictures disappeared after installing Yosemite and new Iphoto. Why

    Pictures disappeared after installing Yosemite and new Iphoto. Why ?

    I also started having problems with iPhoto after installing Yosemite.  Some of the Event collections lost the picture and just has a grey square in its place.  When I click on the Event, it shows a white dotted lined square for each picture and if I click on the picture, it shows an exclamation mark.
    Check, if you also are having a folder "Old Masters" inside the iPhoto Library package, as described by  Muhamad Abdulkadir.
    Ctrl-click (or right-click) your iPhoto Library in the Pictures folder , then select "Show Package Contents".  If you are seeing a folder "Old Masters", copy this folder out of the library. Look inside - are the original image files of the problematic photos inside?
    Are any photos in your "Masters"folder?

  • 'CRT not initialized' error after installing MS Office 2010

    Hi,
    I encountered 'CRT not initialized error' after installing MS Office 2010. I think that with previous version of CVI there were no problems. But, with Labwindows/CVI 2012 error has outbroken. The details are as follows.
    - OS : windows 7 Enterprise (32bit)
    - Labwindows/CVI (v12.0.0 (422))
    - MS Office 2010 (word, powerpoint, excel)
    #1. clean install windows 7 (32 bit)
    #2. install Labwindows/CVI v12.0.0 and device drivers (DAQ, Motion)
    #3. compile and run attached test program : SUCCESS
    #4. online update windows 7 (service pack, explorer 9, and etc)
    #5. compile and run attached test program : SUCCESS
    #6. install MS Office 2010
    #7. compile and run attached test program : 'CRT error'
    #8. uninstall MS Office 2010
    #9. compile and run attached test program : SUCCESS
    I think there are some conflicts between office 2010 and labwindows v12.0.0. How can I solve this problem?
    Thank you in advance.
    Attachments:
    step7-CRT error.jpg ‏31 KB
    test program.zip ‏3305 KB

    More specifically, I decided that some parts of MS Office files and features of NI's motion library conflicts. Because in the attacted sample program, if I exclude NI-Motion functions then the program excutes nicely. But if I include NI-Motion fucntion, for example flex_select_signal, then the 'CRT not initialized' error occurs.
    To solve this problem I tried step by step installation check for MS Office 2010. During each step I included more optional features in MS Office and after each installation I compiled and executed my sample program. At finally, I found that the addtional part of MS Office 2010, if I install Office Sharing Function>Microsoft IME(Korean), then the 'CRT not initialized' error occurs.
    Temporarly, I solved the problem with NOT installing 'Office Sharing Function>Microsoft IME(Korean)' optional feature in the MS Office 2010.
    Could you tell me why this problem occur?

  • Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive

    Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive.
    Tried to reset pram, smc, nvram.
    Tried installing new RAM.
    Tried installing new hard drive.
    You should know that my internal drive is installed in a cheap external case and plugged in a USB 2.0 port because i am waiting for a new hard drive cable.all
    Yep all good things happened to me...i don't know if all these problems are linked, ahh and also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost. My computer is not under warranty anymore so i'd like to avoid a trip to the Apple store but i'm close to doing just that.
    Any help appreciated...

    It's diagnostic software. It's supposed to help you find problems. I don't think anyone is making any software yet that fixes hardware problems.
    That said, the two comments:
    Le husky wrote:
    Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive....
    .....also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost....
    would lead me to think it's the logic board. On older MacBook Pro's both the USB I/O ports and the keyboard/trackpad are fed out of an integrated USB controller integrated into the South Bridge I/O controller. On newer models, the USB ports come out of an integrated North/South bridge controller and the keyboard/trackpad are handled by an SMC controller, which itself interfaces with the I/O controller. All of these items are on the logic board, and they're all unrepairable.
    ...unless of course the "internal drive [that] is installed in a cheap external case" is itself causing the problems. Another thing to try might be a different USB port, if you haven't done so already.
    I didn't know the price for Scannerz went up. I could have sworn I only paid 30-some bucks for it. Maybe it was on sale at the time. I don't remember.
    In any case, good luck.

  • Laserjet 200 color m251 won't print in office picture manager

    Windows 7 pro, service pack 1. HP laserjet 200 color m251 pcl6 will not print in office picture manager or photo viewer. will print using quick time.
    any suggestions?

    Hello BrokerDen.
    I understand your Laserjet 200 printer is unable to print from office picture manager or photo viewer. Have you tried to uninstall and reinstall these programs to see if this resolves your issue?
    Something else you can try is applying an alternate print driver that could be compatible with your programs. Please follow these instructions in this thread. 
    How is this printer connected? Wireless or USB.
    Let me know if this resolves your issue.
    Looking forward to hear from you.
    I worked on behalf of HP.

  • My homepage button is not working for my iphone 4 after installing ios 5

    my homepage button is not working for my iphone 4 after installing ios 5 has anyone got any suggestions please

    Hope it works.
    When i was in iOS 4 nothing happen quite like this.
    BTW, does it do anything with iCloud thing?
    Thank you.

  • Pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate

    pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
    after installing windows 7 my computer only displays the LAN on my quicklaunch bar and I can even search for open WLAN networks =(

    Hi:
    You probably need to install the wireless card driver.

  • Sql Server 2014 showing no services in the configuration manager after install?

    I'm using Windows 8. Recently I downloaded sql server management studio 2014 from the official website. But when I open the Sql server 2014 Configuration Manager there are
    no services listed.
    During installation, there were no any errors.
    See pic from here -> http://stackoverflow.com/questions/26159248/sql-server-2014-showing-no-services-in-the-configuration-manager-after-install?noredirect=1#comment41009151_26159248
    I did search everywhere but still I didn't find anything, please help me resolve this issue. I downloaded Sql server management studio 2014 from here-> http://msdn.microsoft.com/en-in/evalcenter/dn434042.aspx
    Inside `win+r` as i type `services.msc` I'm unable to see any sql or service into it.

    I downloaded sql server management studio 2014 from the official website. But when I open the Sql server 2014 Configuration Manager there are
    no services listed.
    Of course not, SSMS = SQL Server Management Studio is just a tool/frontend, not a Service. You have to install SQL Server database engine.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

    I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

    It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/

  • Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. Not!

    Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. But problem persist.

    Hi there ricalimo,
    I would recommend taking a look at the troubleshooting steps in the article below. If the issue is location specific, than you may want to save the article so you can perform troubleshooting when you are experiencing trouble.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    -Griff W. 

  • After installing Adobe Premiere Pro product CS6 in the program is not active PlayBack

    After installing Adobe Premiere Pro product CS6 in the program is not active
    PlayBack button setting when creating sequence.
    Windows 7 64-bit. Intel Xeon 2, RAM 12 MB. Mxo2

    Hi,
    Thanks for posting that screenshot. It appears that you have opened your Sequence Settings for a DV-NTSC sequence and have made a circle around the "Edit Settings" button.
    Since you chose to create a DV sequence, you cannot change those settings.
    Do you have DV NTSC clips? If so, these are the correct settings.
    If you do not have DV NTSC clips, do not be concerned. Just create the sequence.
    Once you drag a non-DV clip into the DV sequence, it's OK.
    You have the option of changing the Sequence Settings to match those of your clip in a new dialog box.
    Click "Change Sequence Settings" in the dialog box.
    I hope that helps.
    Thanks,
    Kevin

Maybe you are looking for

  • Quicktime Plugin does not work in Firefox

    This is my problem: out of the blue, Quicktime stopped playing embedded files in Firefox. I'm told that I need to download the appropriate plugin. I have re-installed Quicktime more than once, to no avail. Embedded content will run from IE, but not f

  • Request context path for portlet has wrong port number

    I have a JSF application deployed as a portlet on the WLS_Portlet domain with port 8889. The portlet is being consumed in WebCenter Spaces, which lives in the WLS_Spaces domain with port 8888. In my code, I am trying to get the request context path:

  • Third pary sales order- when is it closed

    Iam testing third party process. All the config is in place. after i created the Po from third party sales order , i tried receiving the goods (statistical goods receipt) for it in diffeerent ways. 1) general MIGO for the Po quantity 2) Inbound deliv

  • Download SAP NetWeaver 7.0 - Java Trial

    Dear Friends, what has happened with "SAP NetWeaver 7.0 - Java Trial  ". I cant find it ? Are the packages relocated ? Regards sas

  • Create a popup

    I have an interactive report with one column called notes. Some of the rows have notes some may not have notes. For the ones that have notes, how would I say, click on the note to see a popup of the whole note? Right now, it is setup to only see the