Artifact showing at edge of shape with multiple fills in the Appearnce panel

I often see an artifact on screen at the edge of a shape that has multiple fills built in the Appearance panel. Sometimes these artifacts will print, sometimes not, so I never know what we're going to get in Production until it's been printed. I work in a high volume production facility with tight turnaround times, so running test prints of each order is not an option. Certain color combinations are more offensive than others, but typically lighter colors will cause problems. It might not look like much, but it's enough to ruin an order.
This appearance was built with a solid white fill on the bottom, then the black digital camo repeating pattern, then the white to transparent gradient on top.
The image below is from a different order, but shows what we get when it's printed.
Has anyone ever seen something like this before? Any suggestions would be greatly appreciated.
Thanks.

It looks like goes away on screen, but I've got to run a test print to be sure we get the same thing when we output. Our production team is gone for the night, so we'll do our test print in the morning and let you know what we get.
Thanks for the help.

Similar Messages

How to import a album with multiple artists in the one album?

How do I import a album with multiple artists as the one album. Everytime I try to do this it does not collate it into one album, the other artists come up seperatley, also if this is possible can you set so that it works automatically everytime?
Hope someone can help.
Cheers,
Fuzzi G.

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

What is the best way to zero a 'custom voltage with excitation' sensor from the front panel?

What is the best way to zero a 'custom voltage with excitation' sensor from the front panel?
Thanks for any help

Hi Donavan,
There are two options for zeroing with the NI-9237. You can perform offset nulling and shunt calibration with a strain task, or if you use custom excitation you can use software compensation.
See the Bridge Balancing, Offset Nulling section in the Load, Force, and Torque Measurements tutorial. Take a measurement before the strain is applied and subtract this from all subsequent measurements. See the above tutorial to consider the tradeoff in accuracy between these two options.
Hope this helps,
Jennifer O.
Applications Engineer
National Instruments

Date picker not showing up in iOS Reader with multiple dates?

Hi all,
The date picker for iOS shows up for forms with a single date box. However, with multiple forms, the keyboard pops up instead of the date picker. It still handles correctly formatting-wise, but it's become a bit of hassle with having to type the date instead of simply filling out today. Is this a bug or by design?

Hi jncasino,
We are not able to reproduce this issue at our end. Could you please share the file having this issue to help us investigate and fix this issue?
Thanks,
-Shilpi

Lightroom CC issues with multiple export at the same time

Back before Lightroom updated to the CC version, I was able to use export presets to send 4 different versions of the photos I'm working on at the same time (A Full Size for client at certain size, full size for myself, web-sized with watermark and a thumbnail). Since updating to the CC version, I'm only able to start the export process on two of these versions before the system simply becomes crippled and I cannot even navigate through Lightroom without it chugging along.
For reference, I'm running a 2014 rMBP with 16GB of RAM, LR is the only app open at the time and it's showing that I have roughly 6GB of RAM free when attempting this export.
TL;DR: LR5 worked wiht multiple exports at the same time, but LRCC now chugs after 2 exports are started

Re: "Selecting video in Messages, now starts Face time for video. Face time is one to one only."
Apple "Messages" supports two different types of video conferencing. It's become more than a little confusing. If you (or the person on the other end) ONLY have accounts set up for Apple's "iMessage" service (associated with your Apple ID and "iCloud") you may see the video symbol, but when you click on it you will be connected via FaceTime which is limited a 1-to-1 video conference.
However, if you have set up an AIM account in Messages (you may already have an AIM account ID if you once used iChat for video, audio and screensharing) and the person at the other end also has an AIM account you will be connected via AIM and will be able to do screen sharing and multi-person video conferences just like the old iChat, i.e. you'll have iChat Theater features, up to 4-way conferencing, etc.
It can get very confusing if, for example, you've signed up for AIM using a .me or .cloud email address. But once you have it set up and learn to recognise the way Messages switches between AIM and iMessage all the old iChat features work just fine in Messages.

Erratic behavior with multiple calls to the same RFC

Hi,
I am running into a strange problem invoking a custom RFC from a .NET application. I would appreciate it if someone has any insight into it.
The steps to call the RFC are straightforward:
1. Open the connection to SAP server
2. Make the call
3. Close the connection
As you can imagine, the code is also quite simple.
In my simulation program, I have a button on a UI form that one can click and execute the above steps.
The problem I am running into is that, on multiple calls, sometimes the parameter values that show up on the SAP side are not right. When the input parameter (a structure) is viewed in the ABAP debugger, the field values are all getting exchanged. For example, first name field contains values for the last name. Also, some fields that are supposed to have values do not have any.
Just before the RFC call is made, when we look at the structures on the .NET side, the field values are the way they are supposed to be.
I have not been able to establish a pattern. Sometimes, it takes two clicks to reproduce this problem. Sometimes it takes five.
One of the team members thinks that this starts occurring right after one call fails for some valid reasons. However, I am not yet convinced.
Having written many custom .NET applications using RFCs an BAPIs, I am fairly conversant with the technology. However, this one just baffles me. It appears something is getting messed up at the RFC layer itself. Does anyone have any idea on what could be happening?
Thank you in advance for your help.
Pradeep

Indeed this is interesting .
The problem is caused by an incompatible change from .NET Framework 1.1 to 2.0. Howerver, the documentation on the 1.1. API was not clear enough to decide if the incompatible change was adequate or not. Now in detail:
NCo runtime uses the reflection API Type.GetProperties to read and cache all properties of a Proxy structure. NCo assumes that the order of the returned properties is the same on each call and especially that it is the order of the properties as they appear in source code. This was the behavior in .NET 1.1. It has changed in 2.0, see e.g. the internet forum discussion in http://www.thescripts.com/forum/thread455492.html .
Calling Type.GetProperty(<PropertyName>) or Type.SetProperty(<PropertyName>) in your code moves the mentioned properties up in the list returned by Type.GetProperties() later inside of NCo.
We found the following work-arroud:
When using late-binding, call a dummy Type.GetProperties() before any GetProperty or SetProperty.

Managing sole iTunes library with multiple machines on-the-go with database&media on external drive?

Hi fellows. Trying to organize & revamp my iTunes library & wish to achieve a configuration but lack the expertise to achieve it. My objectives are:
Objectives
+1. for my multimedia content to be stored/accessed from an external hard disk+
+2. to keep the entire iTunes multimedia & all necessary operating files as self-contained as possible,+
+3. Allow multiple machines to manage import of new content into library, i.e. download new episodes of podcasts, rip new music & movies into the library, sync-ing of iPod even when said machine is nowhere near my external hard disk (this is the tricky one)+
_Justification for my objectives_
For objective #3, it's not that I'm trying to be funny. My use case is I've 1 laptop (main machine & always at home) & 1 netbook (brought to school daily). Most of my iTunes usage will be via the stay-at-home laptop; but I may wish to add/manage new content onto my iTunes library/iPod while I'm outside (hence, decoupled from my external hard disk at home).
I'm not trying to be funny for objective #1 either. I wish to have a streamlined process of retaining & re-instating my iTunes library meta-data across system re-format, i.e. where the iTunes library db files' location may be changed (most obvious being the new "My Music" folder path in Win7 from WinXP)
_What I'm well aware of_
I understand that storing/re-locating multimedia on external hard disk is no-kick to iTunes veteran. I also understand that after a new installation of iTunes, I can move the fresh copy of "iTunes_library.itl" & "iTunes_library.xml" files to my external volume & point iTunes to their new address from the 2nd launch onwards. I also understand any new machines I introduce into my environment can be directed to that exact copy of iTunes library database files when I install iTunes & pressing "Shift" key upon their launch. Lastly, I also understand that I will have no access to my multimedia files (for playback) while I'm outside, but I can still add new content, & download new podcasts & remove old content from my library/iPod
_The question_
However, what I have difficulty achieving, is launching iTunes on my on-the-go machine(s), without a local copy of the iTunes library database files. I doubt iTunes will be able to launch at all, & if I create a new library (just to launch iTunes), it will not possess content from my main media collection & likely to wipe out my iPod.
_My novice attempt & its inadequacies_
My 1st instinct, is to have the iTunes library database files stored in the cloud. More specifically, I can store them files in my DropBox folder/account, & have every machine update to a single latest version of iTunes library database files upon Internet connection. However, this method depends on:
+* the DropBox application to exist forever,+
+* assumed the installation path of DropBox (or any applications for that matter) to persist/remain unchanged across future versions of operating systems,+
+* Will corrupt any un-sync-ed version of my iTunes library database files when I launched iTunes without 1st updating the local cached copy of them database files (suppose I manage my iPod playlists via iTunes on a plane)+
_Open for recommendations_
So here I'm, all ears to any fine recommendations you iTunes veterans have to offer. Thanx in advance.

In case anyone is interested in these sorta thing:
UPDATE #4: Unfortunately, if you discover you tagged something wrong after importing the songs, even when you correct the tags, iTunes will not re-organize the folder hierarchy, as long as “Keep iTunes Music folder organized“ is UNchecked, even if the songs were imported via the “Automatically add to iTunes folder” channel.
Example: I imported a folder of Andy Lau songs into my library, unbeknownst to me, some of the songs had their “Artist” tagged as “Andy Lau“, while some had theirs tagged as “Liu De Hua“. Naturally, the 1st time round I imported them, 2 separate folders were instantiated as to iTunes, those were names of 2 distinct artists (this is expected, & acceptable behaviour). The downside is, even if I re-tagged all those songs with “Andy Lau” as the artist, iTunes will no longer re-organize & consolidate all them songs into a single “Andy Lau” artist folder (because I’d “Keep iTunes Music folder organized” UNchecked remember?)
Well, you may suggest that I check that option when managing my future library & uncheck it right before launching/using my main, current library. The thing is, iTunes preferences persist across libraries, & one day I will forget to uncheck that option, launch my main library & lose all my current music folder structure to iTunes’ re-organization (which I don;t want, as of yet). Which brings me to another update:
UPDATE #5: My future iTunes library has “I:/iTunes_Media” as iTunes’s “Home” folder. This setting persists even when I switch back to my main, current library. Which means, if I’d my external volume connected while launching/using my main, current library, all new content will end up in that folder on the external volume! Which messes up the whole scheme of things! Arghz!
UPDATE #6: Here’re some updates with regards to ID3 tags:
* the “Album Artist” in Windows (7) Explorer = the “Album Artist” field in iTunes 9
* Modifying a ID3 tag field using Windows (7) Explorer will update BOTH the v1 & v2.3 version of the ID3 tags on the song (if the song has both versions of tags embedded & if the field exists in both tag versions). If you update the tags via iTunes, only the v2.3 tags get updated. This is surprising.
* the “Contributing Artist” field in Windows (7) Explorer = the “Artist” field in iTunes 9 & the “Artist” field in ID3v1 tags (changes in tany of the 3 fields will affect the other 2 respectively)
o However, iTunes Media folder organization will only adhere to the value saved in the “Album Artist” field [if you change the value of "Contributing Artist" in Windows (7) Explorer, the "Artist" field in iTunes or the "Artist" field in a song's ID3v1 tags, no folder re-organization will occur]
UPDATE #7: Some updates with regards to workflow:
Decided to retain all non-music content within a sub-folder named “non-music” beneath the main album folder (& take strict precautions to import songs only). The exception is “m3u” playlist files. Have read elsewhere if you import a folder of songs & there’s an “m3u” playlist inside, your library may have duplicates and/or the tags of those songs you just imported could be screwed, etc.

How can I create a hashmap() with multiple values for the same key?

I am trying to write an application that will us something like a Map() with multiple values but some have the same key. Is this possible?

i had the same question. just create a List, add all the values u want to it, and then put the List into the map like u would a normal single value. e.g.
List list = new ArrayList();
list.add(value1);
list.add(value2);
map.put(key, list);
i bet u r doing the same course as i am =)

Using my ipod with multiple computers: not the usual problem I think

I've searched the forum and various help documents but I couldn't find the answer to this.
I have a laptop at the office (work-related, so I don't have any of my music on it, just itunes) and my computer at home. Ideally I'd like to:
= keep my ipod automatically synced to my home computer
= be able to connect my ipod to my work laptop and play the music stored on it through itunes there, and also keep it charged and ready for the trip home.
It seems that the 'manually manage music and videos' setting travels with the ipod, rather than being stored on the computer's itunes installation. If I set it at work, so I can play music there, when I connect the ipod at home I have to reset it (and a few times when I did so the ipod started deleting everything because 'sync my music' was not checked, grrr).
I just want to set things up in a way so that when I connect my ipod at work it will let me play whatever songs I have there (without wanting to sync anything), and when I connect it at home it will automatically update it. It's simple enough, but I can't seem to figure out how to do it.
If I connect the ipod at work and press 'cancel' when the 'do you want to erase things' pops up, it doesn't try to change the settings, but at the same time it doesn't let me play music at all, everything is greyed out
does anybody have any idea? I don't want to resort to have to buy a usb power adapter just so that I can play my ipod at work without draining the battery...

B_Ram wrote:
Could it be because its an iPhone and not a true iPod???
i doubt it.
actually, syncing an iPod Touch (or iPhone) with multiple computers is not recommended @ all. click here to find out what Apple has to say about it.
all i can think of, i you really must do that, is this:
to prevent a sync when plugging in the iPod - hold down the option and the command ( on a PC that would be the shift and ctrl ) keys when plugging in the ipod - keep pressing the keys until the iPod is listed under the devices list in iTunes. now you should be able to do what you want.
however, you do so @ your own peril, as the article above outlined.
alternatively, consider a setup such as this.
good luck !
JGG

Timesten replication with multiple interfaces sharing the same hostname

Hi,
we have in our environment two Sun T2000 nodes, running SunOS 5.10 and hosting a TT server currently in Release 7.0.5.9.0, replicated between each other.
I would like to have some more information on the behavior of the replication w.r.t. network reliability when using two interfaces associated to the same hostname, the one used to define the replication element.
To make an example we have our nodes sharing this common /etc/hosts elements:
151.98.227.5 TBMAS10df2 TBMAS10df2-10 TBMAS10df2-ttrep
151.98.226.5 TBMAS10df2 TBMAS10df2-01 TBMAS10df2-ttrep
151.98.227.4 TBMAS9df1 TBMAS9df1-10 TBMAS9df1-ttrep
151.98.226.4 TBMAS9df1 TBMAS9df1-01 TBMAS9df1-ttrep
with the following element defined for replication:
ALTER REPLICATION REPLSCHEME
ADD ELEMENT HDF_GNP_CDPN_1 TABLE HDF_GNP_CDPN
CHECK CONFLICTS BY ROW TIMESTAMP
COLUMN ConflictResTimeStamp
REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
MASTER tt41data ON "TBMAS9df1-ttrep"
SUBSCRIBER tt41data ON "TBMAS10df2-ttrep"
RETURN RECEIPT BY REQUEST
ADD ELEMENT HDF_GNP_CDPN_2 TABLE HDF_GNP_CDPN
CHECK CONFLICTS BY ROW TIMESTAMP
COLUMN ConflictResTimeStamp
REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
MASTER tt41data ON "TBMAS10df2-ttrep"
SUBSCRIBER tt41data ON "TBMAS9df1-ttrep"
RETURN RECEIPT BY REQUEST;
On this subject moving from 6.0.x to 7.0.x there has been some changes I would like to better understand.
6.0.x reported in the documentation for Unix systems:
If a host contains multiple network interfaces (with different IP addresses),
TimesTen replication tries to connect to the IP addresses in the same order as
returned by the gethostbyname call. It will try to connect using the first address;
if a connection cannot be established, it tries the remaining addresses in order
until a connection is established.
Now On Solaris I don't know how to let gethostbyname return more than one interface (the documention notes at this point:
If you have multiple network interface cards (NICs), be sure that “multi
on” is specified in the /etc/host.conf file. Otherwise, gethostbyname will not
return multiple addresses).
But I understand this could be valid for Linux based systems not for Solaris.
Now if I properly understand the above, how was the 6.0.x able to realize the first interface in the list (using the same -ttrep hostname) was down and use the other, if gethostbyname was reporting only a single entry ?
Once upgraded to 7.0.x we realized the ADD ROUTE option was added to teach TT how to use different interfaces associated to the same hostname. In our environment we did not include this clause, but still the replication was working fine regardless of which interface we were bringing down.
My both questions in the end lead to the same doubt on which is the algorithm used by TT to reach the replicated node w.r.t. entries in the /etc/hosts.
Looking at the nodes I can see that by default both routes are being used:
TBMAS10df2:/-# netstat -an|grep "151.98.227."
151.98.225.104.45312 151.98.227.4.14000 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.14005 151.98.227.4.47307 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.14005 151.98.227.4.48230 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.46050 151.98.227.4.14005 1049792 0 1049800 0 ESTABLISHED
TBMAS10df2:/-# netstat -an|grep "151.98.226."
151.98.226.5.14000 151.98.226.4.47699 1049792 0 1049800 0 ESTABLISHED
151.98.226.5.14005 151.98.226.4.47308 1049792 0 1049800 0 ESTABLISHED
151.98.226.5.44949 151.98.226.4.14005 1049792 0 1049800 0 ESTABLISHED
Tried to trace with ttTraceMon but once I brought down one of the interfaces did not see any reaction on either node, if you have some info it would be really appreciated !
Cheers,
Mike

Hi Chris,
Thanks for the reply, I have few more queries on this.
1.Using the ROUTE CLAUSE we can use multiple IPs using priority level set, so that if highest priority level set in thr ROUTE clause for the IP is not active it will fall back to the next level priority 2 set IP. But cant we use ROUTE clause to use the multiple route IPs for replication simultaneously?
2. can we execute multiple schema for the same DSN and replication scheme but with different replication route IPs?
for example:
At present on my system, I have a replication scheme running for a specific DSN with stand alone Master-Subscriber mechanism, with a specific route IP through VLAN-xxx for replication.
Now I want to create and start another replication scheme for the same DSN and replication mechanism with a different VLAN-yyy route IP to be used for replication in parallel to the existing replication scheme. without making any changes to the pre-existing replication scheme.
for the above scenarios, will there be any specific changes respective to the different replication schema mechanism ie., Active Standby and Standalone Master Subscriber mechanism etc.,
If so what are the steps. like how we need to change the existing schema?
Thanks In advance.
Naveen

After downloading music and dragging into iTunes I end up with multiple copies of the album on my hard drive. I do have the "copy files into iTunes library" checked. When I try to erase one of the copies I end up with red ! in iTunes library.

Please Help! After downloading an album and dragging it into itunes I end up having multiple copies of the album on my hard drive. I do have (under Itunes preferences, advanced) copy songs into itunes library "checked". I'm sure this is the reason for the multiple copies. When I try to delete one of the copies of the album and go back to itunes and try playing a song, I get a red exclamtion point next to the song with an error message saying itunes cannot locate file. My questions are, Does Itunes literally make a copy of the song? If so , How do you know which file to delete?

Sony's own entertainment software on the Vaio plays merry **** with iTunes, worse there's no telling when it will kick in.
First head over to the Sony Vaio site and get the update for the software, that will stop it from messing with the iTunes database/library files when you connect your iPod.
http://support.apple.com/kb/TS2715
http://esupport.sony.com/US/perl/swu-download.pl?mdl=VGNP588EQ&updid=4526&osid=28
With that stopped you can add the music back without fear of this happening again.

How can you develop photo galleries with multiple pages using the web module?

Going through the web module I can see there are many options for developing a web page with a single collection of photos. How can you develop a web site with multiple pages containing different categories of photos using the Lightroom web module?

This thread will give you several ideas.
Re: How do you embed a gallery into an existing website?

With multiple players only the first created is in the foreground

Using JMF 2.1.1, I can create multiple players. There's some fishy behavior though. The application has a JFrame, with a JTabbedPane. Within the JTabbedPane, there are a number of JInternalFrame's - each containing a lightweight Player.
1. The first created player with always be in the foreground. Selecting other players, or moving them around the screen does not bring the video to the foreground. In fact, if they get cascaded, the video is always seen in the order the players were created.
Is there a way to bring a player into the foreground?
2. Moving the JInternalFrame's around the visible area, it behaves strangely at the edges of the application area. The video can actually overlap slightly, the boundary of the JTabbedPane, for example.
thanks in advance
gene
2.

I have found the root of my problem: you cannot mix heavy and lightweight components very easily. The description at
http://java.sun.com/products/jfc/tsc/articles/mixing/
describes and has perfect examples of what is happening to me. The Player method getVisualComponent() returns a java.awt.Component, and that's the problem!
The heavy weight awt objects are over writing the light weight swing components.
damn! Anybody know how to change that? I already use the "lightweight renderer" hint in the manager. Trying to cast the player to javax.swing.JComponent will compile, but bombs at run-time. I'd hate to switch over to all heavyweight awt components just to fix this up.

How to search with multiple constraints in the new java API?

I'm having a problem using the new MDM API to do searches with multiple constraints. Here are the classes I'm trying to use, and the scenario I'm trying to implement:
Classes:
SearchItem: Interface
SearchGroup: implements SearchItem, empty constructor,
             addSearchItem (requires SearchDimension and SearchConstraint, or just a SearchItem),
             setComparisonOperator
SearchParameter: implements SearchItem, constructor requires SearchDimension and SearchConstraint objects
Search: extends SearchGroup, constructor requires TableId object
RetrieveLimitedRecordsCommand: setSearch method requires Search object
FieldDimension: constructor requires FieldId object or FieldIds[] fieldPath
TextSearchConstraint: constructor requires string value and int comparisonOperator(enum)
BooleanSearchConstraint: constructor requires boolean value
Scenario:
Okay, so say we have a main table, Products. We want to search the table for the following:
field IsActive = true
field ProductColor = red or blue or green
So the question is how to build this search with the above classes? Everything I've tried so far results in the following error:
Exception in thread "main" java.lang.UnsupportedOperationException: Search group nesting is currently not supported.
     at com.sap.mdm.search.SearchGroup.addSearchItem(Unknown Source)
I can do just the ProductColor search like this:
Search mySearch = new Search(<Products TableId>);
mySearch.setComparisonOperator(Search.OR_OPERATOR);
FieldDimension myColorFieldDim = new FieldDimension(<ProductColor FieldId>);
TextSearchConstraint myTextConRed = new TextSearchConstraint("red",TextSearchConstraint.EQUALS);
TextSearchConstraint myTextConBlue = new TextSearchConstraint("blue",TextSearchConstraint.EQUALS);
TextSearchConstraint myTextConGreen = new TextSearchConstraint("green",TextSearchConstraint.EQUALS);
mySearch.addSearchItem(myColorFieldDim,myTextConRed);
mySearch.addSearchItem(myColorFieldDim,myTextConBlue);
mySearch.addSearchItem(myColorFieldDim,myTextConGreen);
the question is how do I add the AND of the BooleanSearchConstraint?
FieldDimension myActiveFieldDim = new FieldDimension(<IsActive FieldId>);
BooleanSearchConstraint myBoolCon = new BooleanSearchConstraint(true);
I can't just add it to mySearch because mySearch is using OR operator, so it would return ALL of the Products records that match IsActive = true. I tried creating a higher level Search object like this:
Search topSearch = new Search(<Products TableId>);
topSearch.setComparisonOperator(Search.AND_OPERATOR);
topSearch.addSearchItem(mySearch);
topSearch.addSearchItem(myActiveFieldDim,myBoolCon);
But when I do this I get the above "Search group nesting is currently not supported" error. Does that mean this kind of search cannot be done with the new MDM API?

I'm actually testing a pre-release of SP05 right now, and it still is not functional. The best that can be done is to use a PickListSearchConstraint to act as an OR within a field. But PickList is limited to lookup Id values, text attribute values, numeric attribute values and coupled attribute values. It works for me in some cases where I have lookup Id values, but not in other cases where the users want to search on multiple text values within a single field.

I'm having problems in a GOOP application with multiple instances of the same object running simultaneously.

I?ve written an application to control a system with multiple lamps. Each lamp in the system has its own power supply. Each lamp object contains a reference to its power supply. The application contains an array with the references to all the lamps in the system. Each lamp is in charge of monitoring itself and setting its power supply?s voltage according to the applications commands, therefore each lamp needs that its ?run me? method will run as long as the application is running i.e. the run method has to be reentrant. Because there are multiple lamps and because the ?run me? methods for each lamp run simultaneously, to over come this problem each lamp has a met
hod ?run? that calls ?run me? with ?RUN VI? invoke node with the ?Wait until done? set to false. When I run the application, it seems to work but if I check the AO there is no change in the output, and the lamps seem to be reading their input from the same channel. I can?t seem to find the problem, I think that the fact that the method is reentrant causes some sort of mix-up in the separate object references. Also because the method is reentrant I can?t debug it (with one lamp it seems to work ok). Does anyone have any idea what could be causing this problem.
P.S I'm having problems attaching my sample program to this message. You can contact me at [email protected] to recive the sample program I wrote.

Jean, Thanks for your answer, I've tried checking the invoke node that calls the "Run VI" method but it doesnt return an error any of the times its called even that the Vi that it called is still running. I also tried your solution of changing the object's "Run" method to a template but that doesnt work either. I can't seem to post the sample progam that demonstrates the problem, is it possible to send it to you by email, contact me at [email protected]
Attachments:
Sample_program.zip ‏926 KB

Artifact showing at edge of shape with multiple fills in the Appearnce panel

Similar Messages

Maybe you are looking for